From: "Kashyap, Desai" <kashyap.desai@lsi.com>
To: linux-scsi@vger.kernel.org
Cc: eric.moore@lsi.com, sathyap@lsi.com,
James.Bottomley@HansenPartnership.com
Subject: [PATCH 3/5] mpt fusion: Added Firmware debug support
Date: Tue, 6 Jan 2009 15:03:37 +0530 [thread overview]
Message-ID: <20090106093332.GE13033@lsi.com> (raw)
Added support for Firmware debuging
---
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
---
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 55d9a7e..ea3aafb 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -107,6 +107,14 @@ module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
- (default=0)");
+int mpt_fwfault_debug;
+EXPORT_SYMBOL(mpt_fwfault_debug);
+module_param_call(mpt_fwfault_debug, param_set_int, param_get_int,
+ &mpt_fwfault_debug, 0600);
+MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
+ " and halt Firmware on fault - (default=0)");
+
+
#ifdef MFCNT
static int mfcounter = 0;
@@ -6337,6 +6345,33 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
*size = y;
}
+
+/**
+ * mpt_halt_firmware - Halts the firmware if it is operational and panic
+ * the kernel
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_halt_firmware(MPT_ADAPTER *ioc)
+{
+ u32 ioc_raw_state;
+
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
+ ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
+ ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ } else {
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
+ panic("%s: Firmware is halted due to command timeout\n",
+ ioc->name);
+ }
+}
+EXPORT_SYMBOL(mpt_halt_firmware);
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Reset Handling
@@ -6369,6 +6404,8 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
printk("MF count 0x%x !\n", ioc->mfcnt);
#endif
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
/* Reset the adapter. Prevent more than 1 call to
* mpt_do_ioc_recovery at any instant in time.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index dff048c..b3e981d 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -922,11 +922,14 @@ extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern void mpt_halt_firmware(MPT_ADAPTER *ioc);
+
/*
* Public data decl's...
*/
extern struct list_head ioc_list;
+extern int mpt_fwfault_debug;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif /* } __KERNEL__ */
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index ee09041..e62c6bc 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1846,6 +1846,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
if (hd->timeouts < -1)
hd->timeouts++;
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
+
/* Most important! Set TaskMsgContext to SCpnt's MsgContext!
* (the IO to be ABORT'd)
*
next reply other threads:[~2009-01-06 9:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-06 9:33 Kashyap, Desai [this message]
2009-01-06 19:53 ` [PATCH 3/5] mpt fusion: Added Firmware debug support Grant Grundler
2009-01-07 6:03 ` Desai, Kashyap
2009-01-07 20:04 ` Grant Grundler
2009-01-07 20:20 ` Prakash, Sathya
2009-01-07 21:01 ` Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090106093332.GE13033@lsi.com \
--to=kashyap.desai@lsi.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=eric.moore@lsi.com \
--cc=linux-scsi@vger.kernel.org \
--cc=sathyap@lsi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.