From mboxrd@z Thu Jan 1 00:00:00 1970 From: Giovanni Pancotti Subject: Re: [Bugme-new] [Bug 12351] New: sata_nv hotplug not work in 2.6.27.10 Date: Tue, 6 Jan 2009 11:27:58 +0100 Message-ID: <20090106102758.GA7309@libero.it> References: <20090105153644.8a0eea74.akpm@linux-foundation.org> <4962AC5C.1000605@shaw.ca> Reply-To: gpanco@tiscali.it Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from cp-out11.libero.it ([212.52.84.111]:37785 "EHLO cp-out11.libero.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751307AbZAFKfb (ORCPT ); Tue, 6 Jan 2009 05:35:31 -0500 Content-Disposition: inline In-Reply-To: <4962AC5C.1000605@shaw.ca> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Robert Hancock Cc: Andrew Morton , linux-ide@vger.kernel.org, bugme-daemon@bugzilla.kernel.org, stable@kernel.org, Tejun Heo On Monday 05 January 2009, alle 18:57, Robert Hancock wrote: >>> Hardware Environment:x86 ASUS M2N-E > > OK, this is an MCP61 board. We're now using softreset instead of hardreset > on hotplug and apparently that doesn't work. Thing is that: no, it is not MCP61, but MCP55: dual ~ # lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) dual ~ # dmidecode # dmidecode 2.9 SMBIOS 2.4 present. 72 structures occupying 2069 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: ASUS M2N-E ACPI BIOS Revision 1601