All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@vyatta.com>
To: David Miller <davem@davemloft.net>
Cc: buytenh@marvell.com, netdev@vger.kernel.org
Subject: Re: [PATCH 4/8] dsa: convert to net_device_ops
Date: Tue, 6 Jan 2009 14:51:43 -0800	[thread overview]
Message-ID: <20090106145143.5f18ee5b@extreme> (raw)
In-Reply-To: <20090106.104344.130715147.davem@davemloft.net>

Subject: dsa: convert to net_device_ops (v2)

Convert this driver to use net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>


--- a/net/dsa/slave.c	2009-01-06 14:16:05.760509806 -0800
+++ b/net/dsa/slave.c	2009-01-06 14:24:07.632360799 -0800
@@ -286,6 +286,42 @@ static const struct ethtool_ops dsa_slav
 	.get_sset_count		= dsa_slave_get_sset_count,
 };
 
+#ifdef CONFIG_NET_DSA_TAG_DSA
+static const struct net_device_ops dsa_netdev_ops = {
+	.ndo_open	 	= dsa_slave_open,
+	.ndo_stop		= dsa_slave_close,
+	.ndo_start_xmit		= dsa_xmit,
+	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
+	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
+	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
+	.ndo_set_mac_address	= dsa_slave_set_mac_address,
+	.ndo_do_ioctl		= dsa_slave_ioctl,
+};
+#endif
+#ifdef CONFIG_NET_DSA_TAG_EDSA
+static const struct net_device_ops edsa_netdev_ops = {
+	.ndo_open	 	= dsa_slave_open,
+	.ndo_stop		= dsa_slave_close,
+	.ndo_start_xmit		= edsa_xmit,
+	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
+	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
+	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
+	.ndo_set_mac_address	= dsa_slave_set_mac_address,
+	.ndo_do_ioctl		= dsa_slave_ioctl,
+};
+#endif
+#ifdef CONFIG_NET_DSA_TAG_TRAILER
+static const struct net_device_ops trailer_netdev_ops = {
+	.ndo_open	 	= dsa_slave_open,
+	.ndo_stop		= dsa_slave_close,
+	.ndo_start_xmit		= trailer_xmit,
+	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
+	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
+	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
+	.ndo_set_mac_address	= dsa_slave_set_mac_address,
+	.ndo_do_ioctl		= dsa_slave_ioctl,
+};
+#endif
 
 /* slave device setup *******************************************************/
 struct net_device *
@@ -306,32 +342,27 @@ dsa_slave_create(struct dsa_switch *ds, 
 	SET_ETHTOOL_OPS(slave_dev, &dsa_slave_ethtool_ops);
 	memcpy(slave_dev->dev_addr, master->dev_addr, ETH_ALEN);
 	slave_dev->tx_queue_len = 0;
+
 	switch (ds->tag_protocol) {
 #ifdef CONFIG_NET_DSA_TAG_DSA
 	case htons(ETH_P_DSA):
-		slave_dev->hard_start_xmit = dsa_xmit;
+		slave_dev->netdev_ops = &dsa_netdev_ops;
 		break;
 #endif
 #ifdef CONFIG_NET_DSA_TAG_EDSA
 	case htons(ETH_P_EDSA):
-		slave_dev->hard_start_xmit = edsa_xmit;
+		slave_dev->netdev_ops = &edsa_netdev_ops;
 		break;
 #endif
 #ifdef CONFIG_NET_DSA_TAG_TRAILER
 	case htons(ETH_P_TRAILER):
-		slave_dev->hard_start_xmit = trailer_xmit;
+		slave_dev->netdev_ops = &trailer_netdev_ops;
 		break;
 #endif
 	default:
 		BUG();
 	}
-	slave_dev->open = dsa_slave_open;
-	slave_dev->stop = dsa_slave_close;
-	slave_dev->change_rx_flags = dsa_slave_change_rx_flags;
-	slave_dev->set_rx_mode = dsa_slave_set_rx_mode;
-	slave_dev->set_multicast_list = dsa_slave_set_rx_mode;
-	slave_dev->set_mac_address = dsa_slave_set_mac_address;
-	slave_dev->do_ioctl = dsa_slave_ioctl;
+
 	SET_NETDEV_DEV(slave_dev, parent);
 	slave_dev->vlan_features = master->vlan_features;
 

  reply	other threads:[~2009-01-06 22:51 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-05 20:14 [PATCH 0/8] More net_device ops Stephen Hemminger
2009-01-05 20:14 ` [PATCH 2/8] bonding: use net_device_ops Stephen Hemminger
2009-01-06 18:42   ` David Miller
2009-01-05 20:14 ` [PATCH 3/8] wireless: convert wireless ioctl to net_device_ops Stephen Hemminger
2009-01-05 20:14   ` Stephen Hemminger
2009-01-06 18:42   ` David Miller
2009-01-06 18:42     ` David Miller
2009-01-05 20:14 ` [PATCH 4/8] dsa: convert " Stephen Hemminger
     [not found]   ` <20090106060705.GG4414@server.marvell.com>
2009-01-06 18:43     ` David Miller
2009-01-06 22:51       ` Stephen Hemminger [this message]
2009-01-07  0:45         ` David Miller
2009-01-05 20:14 ` [PATCH 5/8] virtio: " Stephen Hemminger
2009-01-06  9:40   ` Mark McLoughlin
2009-01-06 18:44     ` David Miller
2009-01-05 20:14 ` [PATCH 6/8] xen-netfront: " Stephen Hemminger
2009-01-06  0:17   ` Jeremy Fitzhardinge
2009-01-06 18:45   ` David Miller
2009-01-05 20:14 ` [PATCH 7/8] infiniband: driver API update Stephen Hemminger
2009-01-05 21:02   ` Roland Dreier
2009-01-05 21:22     ` [ofa-general] [PATCH 1/3] infiniband: amso100 convert to net_device_ops Stephen Hemminger
2009-01-05 21:22       ` [ofa-general] [PATCH 2/3] infiniband: nes_nic " Stephen Hemminger
2009-01-05 21:23         ` [ofa-general] [PATCH 3/3] infiniband: ipoib " Stephen Hemminger
2009-01-06  5:07           ` Roland Dreier
2009-01-06 18:46             ` [ofa-general] " David Miller
2009-01-06 18:45     ` [ofa-general] Re: [PATCH 7/8] infiniband: driver API update David Miller
2009-01-05 20:14 ` [PATCH 8/8] sch_teql: convert to net_device_ops Stephen Hemminger
2009-01-06 18:46   ` David Miller
     [not found] ` <20090105201514.192918670@vyatta.com>
2009-01-06 18:41   ` [PATCH 1/8] irda: convert to internal stats David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090106145143.5f18ee5b@extreme \
    --to=shemminger@vyatta.com \
    --cc=buytenh@marvell.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.