Re: [PATCH 2/2] powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E

[Anton Vorontsov <avorontsov@ru.mvista.com>]

On Mon, Jan 05, 2009 at 08:41:55PM +0300, Anton Vorontsov wrote:
> This patch adds pcie nodes to the appropriate dts files, plus adds
> some probing code for the boards.
> 
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
[...]
> diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
> index 1d14d70..b12b9b4 100644
> --- a/arch/powerpc/boot/dts/mpc8377_mds.dts
> +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
[...]
> +	pci1: pcie@e0009000 {
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		#interrupt-cells = <1>;
> +		device_type = "pci";
> +		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
> +		reg = <0xe0009000 0x00001000>;
> +		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
> +		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;

I just noticed that for MPC837x boards FSL U-Boots set up cfg space
at 0xa0000000, mem at 0xa8000000, and io at 0xb8000000. So the setup
is differerent from MPC8315 boards (the ones I was testing this patch
with).

I'll send an update today, and will test it on MPC837x and MPC831x
boards (but firstly need to finish and send PCI-E patches for the
community U-Boots).

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2