From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Thu, 08 Jan 2009 12:44:04 +0000 Subject: Re: [lm-sensors] Support for Intel DG33FB main board? Message-Id: <20090108134404.7a698684@hyperion.delvare> List-Id: References: <495C30EF.3090708@earthlink.net> In-Reply-To: <495C30EF.3090708@earthlink.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Steve, On Wed, 31 Dec 2008 21:56:47 -0500, Stephen Clark wrote: > I have a new intel DG33FB mainboard when I run sensors-detect I get the following: > ... > Trying family `SMSC'... Yes > Found `SMSC LPC47M182 Super IO Fan Sensors' > (but not activated) > ... > Intel Core family thermal sensor... Success! > (driver `coretemp') > > This lets me see the temps of the cores on my q6600 but not > voltages or fan speeds. Are there any plans to support this > main boards further? > > sensors version 3.0.2 with libsensors version 3.0.2 The hardware monitoring features of the LPC47M182 are very often nut used (and thus disabled), we don't even have a driver for them. This means that hardware monitoring is done by either a chip on the SMBus (Did sensors-detect find an SMBus to scan? Did it find any unknown chip there maybe? Including the full output of sensors-detect helps) or, if the board is based on an ICH8 or later Intel south bridge, by the south bridge itself. We don't yet support the ICH8 integrated sensors, unfortunately [1]. [1] http://lists.lm-sensors.org/pipermail/lm-sensors/2009-January/025045.html -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors