From: akpm@linux-foundation.org
To: mjg59@srcf.ucam.org, dtor@mail.ru, lenb@kernel.org,
mjg@redhat.com, mm-commits@vger.kernel.org
Subject: - misc-add-dell-wmi-driver-for-hotkey-control.patch removed from -mm tree
Date: Fri, 09 Jan 2009 13:24:40 -0800 [thread overview]
Message-ID: <200901092124.n09LOeP4007977@imap1.linux-foundation.org> (raw)
The patch titled
misc: add dell-wmi driver for hotkey control
has been removed from the -mm tree. Its filename was
misc-add-dell-wmi-driver-for-hotkey-control.patch
This patch was dropped because it is obsolete
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: misc: add dell-wmi driver for hotkey control
From: Matthew Garrett <mjg59@srcf.ucam.org>
Add a WMI driver for Dell laptops. Currently it does nothing but send a
generic input event when a button with a picture of a battery on it is
pressed, but maybe other uses will appear over time.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
MAINTAINERS | 5
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1
drivers/misc/dell-wmi.c | 210 ++++++++++++++++++++++++++++++++++++++
4 files changed, 226 insertions(+)
diff -puN MAINTAINERS~misc-add-dell-wmi-driver-for-hotkey-control MAINTAINERS
--- a/MAINTAINERS~misc-add-dell-wmi-driver-for-hotkey-control
+++ a/MAINTAINERS
@@ -1376,6 +1376,11 @@ P: Doug Warzecha
M: Douglas_Warzecha@dell.com
S: Maintained
+DELL WMI EXTRAS DRIVER
+P: Matthew Garrett
+M: mjg59@srcf.ucam.org
+S: Maintained
+
DEVICE NUMBER REGISTRY
P: Torben Mathiasen
M: device@lanana.org
diff -puN drivers/misc/Kconfig~misc-add-dell-wmi-driver-for-hotkey-control drivers/misc/Kconfig
--- a/drivers/misc/Kconfig~misc-add-dell-wmi-driver-for-hotkey-control
+++ a/drivers/misc/Kconfig
@@ -136,6 +136,16 @@ config TIFM_7XX1
To compile this driver as a module, choose M here: the module will
be called tifm_7xx1.
+config DELL_WMI
+ tristate "Dell WMI extras"
+ depends on ACPI_WMI
+ depends on INPUT
+ help
+ Say Y here if you want to support WMI-based hotkeys on Dell laptops.
+
+ To compile this driver as a module, choose M here: the module will
+ be called dell-wmi.
+
config ICS932S401
tristate "Integrated Circuits ICS932S401"
depends on I2C && EXPERIMENTAL
diff -puN drivers/misc/Makefile~misc-add-dell-wmi-driver-for-hotkey-control drivers/misc/Makefile
--- a/drivers/misc/Makefile~misc-add-dell-wmi-driver-for-hotkey-control
+++ a/drivers/misc/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
+obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_C2PORT) += c2port/
diff -puN /dev/null drivers/misc/dell-wmi.c
--- /dev/null
+++ a/drivers/misc/dell-wmi.c
@@ -0,0 +1,210 @@
+/*
+ * Dell WMI hotkeys
+ *
+ * Copyright (C) 2008 Red Hat <mjg@redhat.com>
+ *
+ * Portions based on wistron_btns.c:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/acpi.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
+MODULE_DESCRIPTION("Dell laptop WMI hotkeys driver");
+MODULE_LICENSE("GPL");
+
+#define DELL_EVENT_GUID "9DBB5994-A997-11DA-B012-B622A1EF5492"
+
+MODULE_ALIAS("wmi:"DELL_EVENT_GUID);
+
+struct key_entry {
+ char type; /* See KE_* below */
+ u16 code;
+ u16 keycode;
+};
+
+enum { KE_KEY, KE_SW, KE_END };
+
+static struct key_entry dell_wmi_keymap[] = {
+ {KE_KEY, 0xe045, KEY_PROG1},
+ {KE_END, 0}
+};
+
+static struct input_dev *dell_wmi_input_dev;
+
+static struct key_entry *dell_wmi_get_entry_by_scancode(int code)
+{
+ struct key_entry *key;
+
+ for (key = dell_wmi_keymap; key->type != KE_END; key++)
+ if (code == key->code)
+ return key;
+
+ return NULL;
+}
+
+static struct key_entry *dell_wmi_get_entry_by_keycode(int keycode)
+{
+ struct key_entry *key;
+
+ for (key = dell_wmi_keymap; key->type != KE_END; key++)
+ if (key->type == KE_KEY && keycode == key->keycode)
+ return key;
+
+ return NULL;
+}
+
+static int dell_wmi_getkeycode(struct input_dev *dev, int scancode,
+ int *keycode)
+{
+ struct key_entry *key = dell_wmi_get_entry_by_scancode(scancode);
+
+ if (key && key->type == KE_KEY) {
+ *keycode = key->keycode;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int dell_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+ struct key_entry *key;
+ int old_keycode;
+
+ if (keycode < 0 || keycode > KEY_MAX)
+ return -EINVAL;
+
+ key = dell_wmi_get_entry_by_scancode(scancode);
+ if (key && key->type == KE_KEY) {
+ old_keycode = key->keycode;
+ key->keycode = keycode;
+ set_bit(keycode, dev->keybit);
+ if (!dell_wmi_get_entry_by_keycode(old_keycode))
+ clear_bit(old_keycode, dev->keybit);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static void dell_wmi_notify(u32 value, void *context)
+{
+ struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+ static struct key_entry *key;
+ union acpi_object *obj;
+
+ wmi_get_event_data(value, &response);
+
+ obj = (union acpi_object *)response.pointer;
+
+ if (obj && obj->type == ACPI_TYPE_BUFFER) {
+ int *buffer = (int *)obj->buffer.pointer;
+ key = dell_wmi_get_entry_by_scancode(buffer[1]);
+ if (key) {
+ input_report_key(dell_wmi_input_dev, key->keycode, 1);
+ input_sync(dell_wmi_input_dev);
+ input_report_key(dell_wmi_input_dev, key->keycode, 0);
+ input_sync(dell_wmi_input_dev);
+ } else
+ printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
+ buffer[1]);
+ }
+}
+
+static int __init dell_wmi_input_setup(void)
+{
+ struct key_entry *key;
+ int err;
+
+ dell_wmi_input_dev = input_allocate_device();
+
+ if (!dell_wmi_input_dev)
+ return -ENOMEM;
+
+ dell_wmi_input_dev->name = "Dell WMI hotkeys";
+ dell_wmi_input_dev->phys = "wmi/input0";
+ dell_wmi_input_dev->id.bustype = BUS_HOST;
+ dell_wmi_input_dev->getkeycode = dell_wmi_getkeycode;
+ dell_wmi_input_dev->setkeycode = dell_wmi_setkeycode;
+
+ for (key = dell_wmi_keymap; key->type != KE_END; key++) {
+ switch (key->type) {
+ case KE_KEY:
+ set_bit(EV_KEY, dell_wmi_input_dev->evbit);
+ set_bit(key->keycode, dell_wmi_input_dev->keybit);
+ break;
+ case KE_SW:
+ set_bit(EV_SW, dell_wmi_input_dev->evbit);
+ set_bit(key->keycode, dell_wmi_input_dev->swbit);
+ break;
+ }
+ }
+
+ err = input_register_device(dell_wmi_input_dev);
+
+ if (err) {
+ input_free_device(dell_wmi_input_dev);
+ return err;
+ }
+
+ return 0;
+}
+
+static int __init dell_wmi_init(void)
+{
+ int err;
+
+ if (wmi_has_guid(DELL_EVENT_GUID)) {
+ err = dell_wmi_input_setup();
+
+ if (err)
+ return err;
+
+ err = wmi_install_notify_handler(DELL_EVENT_GUID,
+ dell_wmi_notify, NULL);
+ if (err) {
+ input_unregister_device(dell_wmi_input_dev);
+ printk(KERN_ERR "dell-wmi: Unable to register"
+ " notify handler - %d\n", err);
+ return err;
+ }
+
+ } else
+ printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n");
+
+ return 0;
+}
+
+static void __exit dell_wmi_exit(void)
+{
+ if (wmi_has_guid(DELL_EVENT_GUID)) {
+ wmi_remove_notify_handler(DELL_EVENT_GUID);
+ input_unregister_device(dell_wmi_input_dev);
+ }
+}
+
+module_init(dell_wmi_init);
+module_exit(dell_wmi_exit);
_
Patches currently in -mm which might be from mjg59@srcf.ucam.org are
origin.patch
eeepc-laptop-enable-bluetooth-for-asus-eee-901.patch
misc-add-dell-wmi-driver-for-hotkey-control.patch
video-mbp_nvidia_bl-add-support-for-macbook-5-macbook-air-2-and-macbook-pro-5.patch
video-mbp_nvidia_bl-add-a-debug-switch.patch
hp-wmi-handle-rfkill_register-failure.patch
reply other threads:[~2009-01-09 21:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200901092124.n09LOeP4007977@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=dtor@mail.ru \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=mjg@redhat.com \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.