From: Stephen Hemminger <shemminger@linux-foundation.org>
To: David Miller <davem@davemloft.net>, jpr@f6fbb.org
Cc: netdev@vger.kernel.org, linux-hams@vger.kernel.org
Subject: [patch 40/45] yam: convert to internal net_device_stats
Date: Fri, 09 Jan 2009 15:01:37 -0800 [thread overview]
Message-ID: <20090109230139.693081454@linux-foundation.org> (raw)
In-Reply-To: 20090109230057.575650817@linux-foundation.org
[-- Attachment #1: yam-stats.patch --]
[-- Type: text/plain, Size: 3187 bytes --]
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
--- a/drivers/net/hamradio/yam.c 2009-01-09 10:16:50.000000000 -0800
+++ b/drivers/net/hamradio/yam.c 2009-01-09 12:54:25.000000000 -0800
@@ -115,10 +115,6 @@ struct yam_port {
struct net_device *dev;
- /* Stats section */
-
- struct net_device_stats stats;
-
int nb_rxint;
int nb_mdint;
@@ -507,7 +503,7 @@ static inline void yam_rx_flag(struct ne
} else {
if (!(skb = dev_alloc_skb(pkt_len))) {
printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
- ++yp->stats.rx_dropped;
+ ++dev->stats.rx_dropped;
} else {
unsigned char *cp;
cp = skb_put(skb, pkt_len);
@@ -515,7 +511,7 @@ static inline void yam_rx_flag(struct ne
memcpy(cp, yp->rx_buf, pkt_len - 1);
skb->protocol = ax25_type_trans(skb, dev);
netif_rx(skb);
- ++yp->stats.rx_packets;
+ ++dev->stats.rx_packets;
}
}
}
@@ -677,7 +673,7 @@ static void yam_tx_byte(struct net_devic
yp->tx_count = 1;
yp->tx_state = TX_HEAD;
}
- ++yp->stats.tx_packets;
+ ++dev->stats.tx_packets;
break;
case TX_TAIL:
if (--yp->tx_count <= 0) {
@@ -716,7 +712,7 @@ static irqreturn_t yam_interrupt(int irq
handled = 1;
if (lsr & LSR_OE)
- ++yp->stats.rx_fifo_errors;
+ ++dev->stats.rx_fifo_errors;
yp->dcd = (msr & RX_DCD) ? 1 : 0;
@@ -778,11 +774,11 @@ static int yam_seq_show(struct seq_file
seq_printf(seq, " TxTail %u\n", yp->txtail);
seq_printf(seq, " SlotTime %u\n", yp->slot);
seq_printf(seq, " Persist %u\n", yp->pers);
- seq_printf(seq, " TxFrames %lu\n", yp->stats.tx_packets);
- seq_printf(seq, " RxFrames %lu\n", yp->stats.rx_packets);
+ seq_printf(seq, " TxFrames %lu\n", dev->stats.tx_packets);
+ seq_printf(seq, " RxFrames %lu\n", dev->stats.rx_packets);
seq_printf(seq, " TxInt %u\n", yp->nb_mdint);
seq_printf(seq, " RxInt %u\n", yp->nb_rxint);
- seq_printf(seq, " RxOver %lu\n", yp->stats.rx_fifo_errors);
+ seq_printf(seq, " RxOver %lu\n", dev->stats.rx_fifo_errors);
seq_printf(seq, "\n");
return 0;
}
@@ -812,26 +808,6 @@ static const struct file_operations yam_
/* --------------------------------------------------------------------- */
-static struct net_device_stats *yam_get_stats(struct net_device *dev)
-{
- struct yam_port *yp;
-
- if (!dev)
- return NULL;
-
- yp = netdev_priv(dev);
- if (yp->magic != YAM_MAGIC)
- return NULL;
-
- /*
- * Get the current statistics. This may be called with the
- * card open or closed.
- */
- return &yp->stats;
-}
-
-/* --------------------------------------------------------------------- */
-
static int yam_open(struct net_device *dev)
{
struct yam_port *yp = netdev_priv(dev);
@@ -878,9 +854,9 @@ static int yam_open(struct net_device *d
/* Reset overruns for all ports - FPGA programming makes overruns */
for (i = 0; i < NR_PORTS; i++) {
struct net_device *dev = yam_devs[i];
- struct yam_port *yp = netdev_priv(dev);
+
inb(LSR(dev->base_addr));
- yp->stats.rx_fifo_errors = 0;
+ dev->stats.rx_fifo_errors = 0;
}
printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
next prev parent reply other threads:[~2009-01-09 23:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090109230057.575650817@linux-foundation.org>
2009-01-09 23:01 ` [patch 06/45] netrom: convert to internal net_device_stats Stephen Hemminger
2009-01-10 12:54 ` Ralf Baechle DL5RB
2009-01-11 8:15 ` David Miller
2009-01-09 23:01 ` [patch 07/45] netrom: convert to net_device_ops Stephen Hemminger
2009-01-10 12:55 ` Ralf Baechle DL5RB
2009-01-09 23:01 ` [patch 08/45] rose: convert to internal net_device_stats Stephen Hemminger
2009-01-10 12:55 ` Ralf Baechle DL5RB
2009-01-09 23:01 ` [patch 09/45] rose: convert to network_device_ops Stephen Hemminger
2009-01-10 12:55 ` Ralf Baechle DL5RB
2009-01-09 23:01 ` [patch 31/45] 6pack: convert to net_device_ops Stephen Hemminger
2009-01-09 23:01 ` [patch 32/45] baycom: convert to internal net_device_stats Stephen Hemminger
2009-01-10 0:03 ` Thomas Sailer
2009-01-09 23:01 ` [patch 33/45] baycom: convert to net_device_ops Stephen Hemminger
2009-01-10 0:03 ` Thomas Sailer
2009-01-09 23:01 ` [patch 34/45] bpqether: convert to internal net_device_stats Stephen Hemminger
2009-01-09 23:01 ` [patch 35/45] bpqether: convert to net_device_ops Stephen Hemminger
2009-01-09 23:01 ` [patch 36/45] dmascc: convert to internal network device stats Stephen Hemminger
2009-01-09 23:01 ` [patch 37/45] dmascc: convert to network_device_ops Stephen Hemminger
2009-01-09 23:01 ` [patch 38/45] hdlcdrv: convert to internal net_device_stats Stephen Hemminger
2009-01-10 0:03 ` Thomas Sailer
2009-01-09 23:01 ` [patch 39/45] hdlcdrv: convert to net_device_ops Stephen Hemminger
2009-01-10 0:03 ` Thomas Sailer
2009-01-09 23:01 ` Stephen Hemminger [this message]
2009-01-09 23:01 ` [patch 41/45] yam: " Stephen Hemminger
2009-01-09 23:01 ` [patch 42/45] scc: convert to internal net_device_ops Stephen Hemminger
2009-01-09 23:01 ` [patch 43/45] mkiss: convert to internal network device stats Stephen Hemminger
2009-01-09 23:01 ` [patch 44/45] dmascc: convert to net_device_ops Stephen Hemminger
2009-01-09 23:01 ` [patch 45/45] dmascc: convert to internal net_device_ops Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090109230139.693081454@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=jpr@f6fbb.org \
--cc=linux-hams@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.