From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Mon, 12 Jan 2009 12:14:36 +0000 Subject: Re: [lm-sensors] Patch: libsensors: add support for ACPI bus Message-Id: <20090112131436.39cfb417@hyperion.delvare> List-Id: References: <495D3AFC.5040809@redhat.com> In-Reply-To: <495D3AFC.5040809@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi Hans, Sorry for the late answer. On Thu, 01 Jan 2009 22:51:56 +0100, Hans de Goede wrote: > The way the new atk0110 driver work it ends up being connected to an "ACP= I"=20 > bus, this patch adds support for this to lm_sensors-3.0.3 >=20 > With this patch the sensors output on an Asus board looks like this: >=20 > atk0110-acpi-0 > Adapter: ACPI interface > Vcore Voltage: +1.45 V (min =3D +1.45 V, max =3D +1.75 V) > +3.3 Voltage: +3.38 V (min =3D +3.00 V, max =3D +3.60 V) > +5.0 Voltage: +5.16 V (min =3D +4.50 V, max =3D +5.50 V) > +12.0 Voltage: +12.24 V (min =3D +11.20 V, max =3D +13.20 V) > CPU FAN Speed: 1516 RPM (min =3D 0 RPM) > CHASSIS FAN Speed: 0 RPM (min =3D 0 RPM) > POWER FAN Speed: 0 RPM (min =3D 0 RPM) > CHASSIS4 FAN FAN Speed: 0 RPM (min =3D 0 RPM) > CHASSIS2 FAN FAN Speed: 0 RPM (min =3D 0 RPM) > CHASSIS3 FAN FAN Speed: 0 RPM (min =3D 0 RPM) > CPU Temperature: +43.0=B0C (high =3D +90.0=B0C, crit =3D +125.0= =B0C) > MB Temperature: +44.0=B0C (high =3D +45.0=B0C, crit =3D +90.0=B0= C) >=20 >=20 > Jean, can you please review this patch, if its ok I can apply it myself. I have no objection, the patch looks just fine to me, just go ahead and apply it. Please don't forget to apply the libsensors-API document. --=20 Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors