From: Gleb Natapov <gleb@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v4] Stop VM on ENOSPC error.
Date: Tue, 20 Jan 2009 12:56:10 +0200 [thread overview]
Message-ID: <20090120105610.GB27675@redhat.com> (raw)
This version of the patch adds new option "werror" to -drive flag.
Possible values are:
report - report errors to a guest as IO errors
ignore - continue as if nothing happened
stop - stop VM on any error and retry last command on resume
enospc - stop vm on ENOSPC error and retry last command on resume
all other errors are reported to a guest.
Default is "report" to maintain current behaviour.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
diff --git a/hw/ide.c b/hw/ide.c
index 7dd41f7..06ac6dc 100644
--- a/hw/ide.c
+++ b/hw/ide.c
@@ -457,6 +457,8 @@ static inline int media_is_cd(IDEState *s)
#define BM_STATUS_DMAING 0x01
#define BM_STATUS_ERROR 0x02
#define BM_STATUS_INT 0x04
+#define BM_STATUS_DMA_RETRY 0x08
+#define BM_STATUS_PIO_RETRY 0x10
#define BM_CMD_START 0x01
#define BM_CMD_READ 0x08
@@ -488,6 +490,8 @@ typedef struct BMDMAState {
IDEState *ide_if;
BlockDriverCompletionFunc *dma_cb;
BlockDriverAIOCB *aiocb;
+ int64_t sector_num;
+ uint32_t nsector;
} BMDMAState;
typedef struct PCIIDEState {
@@ -498,6 +502,7 @@ typedef struct PCIIDEState {
} PCIIDEState;
static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb);
+static void ide_dma_restart(IDEState *s);
static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
static void padstr(char *str, const char *src, int len)
@@ -865,6 +870,28 @@ static void ide_dma_error(IDEState *s)
ide_set_irq(s);
}
+static int ide_handle_write_error(IDEState *s, int error, int op)
+{
+ BlockInterfaceErrorAction action = drive_get_onerror(s->bs);
+
+ if (action == BLOCK_ERR_IGNORE)
+ return 0;
+
+ if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
+ || action == BLOCK_ERR_STOP_ANY) {
+ s->bmdma->ide_if = s;
+ s->bmdma->status |= op;
+ vm_stop(0);
+ } else {
+ if (op == BM_STATUS_DMA_RETRY)
+ ide_dma_error(s);
+ else
+ ide_rw_error(s);
+ }
+
+ return 1;
+}
+
/* return 0 if buffer completed */
static int dma_buf_rw(BMDMAState *bm, int is_write)
{
@@ -990,9 +1017,10 @@ static void ide_sector_write(IDEState *s)
if (n > s->req_nb_sectors)
n = s->req_nb_sectors;
ret = bdrv_write(s->bs, sector_num, s->io_buffer, n);
+
if (ret != 0) {
- ide_rw_error(s);
- return;
+ if (ide_handle_write_error(s, -ret, BM_STATUS_PIO_RETRY))
+ return;
}
s->nsector -= n;
@@ -1024,6 +1052,20 @@ static void ide_sector_write(IDEState *s)
}
}
+static void ide_dma_restart_cb(void *opaque, int running)
+{
+ BMDMAState *bm = opaque;
+ if (!running)
+ return;
+ if (bm->status & BM_STATUS_DMA_RETRY) {
+ bm->status &= ~BM_STATUS_DMA_RETRY;
+ ide_dma_restart(bm->ide_if);
+ } else if (bm->status & BM_STATUS_PIO_RETRY) {
+ bm->status &= ~BM_STATUS_PIO_RETRY;
+ ide_sector_write(bm->ide_if);
+ }
+}
+
static void ide_write_dma_cb(void *opaque, int ret)
{
BMDMAState *bm = opaque;
@@ -1032,8 +1074,8 @@ static void ide_write_dma_cb(void *opaque, int ret)
int64_t sector_num;
if (ret < 0) {
- ide_dma_error(s);
- return;
+ if (ide_handle_write_error(s, -ret, BM_STATUS_DMA_RETRY))
+ return;
}
n = s->io_buffer_size >> 9;
@@ -2849,11 +2891,25 @@ static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
bm->cur_prd_last = 0;
bm->cur_prd_addr = 0;
bm->cur_prd_len = 0;
+ bm->sector_num = ide_get_sector(s);
+ bm->nsector = s->nsector;
if (bm->status & BM_STATUS_DMAING) {
bm->dma_cb(bm, 0);
}
}
+static void ide_dma_restart(IDEState *s)
+{
+ BMDMAState *bm = s->bmdma;
+ ide_set_sector(s, bm->sector_num);
+ s->io_buffer_index = 0;
+ s->io_buffer_size = 0;
+ s->nsector = bm->nsector;
+ bm->cur_addr = bm->addr;
+ bm->dma_cb = ide_write_dma_cb;
+ ide_dma_start(s, bm->dma_cb);
+}
+
static void ide_dma_cancel(BMDMAState *bm)
{
if (bm->status & BM_STATUS_DMAING) {
@@ -3043,6 +3099,7 @@ static void bmdma_map(PCIDevice *pci_dev, int region_num,
d->ide_if[2 * i].bmdma = bm;
d->ide_if[2 * i + 1].bmdma = bm;
bm->pci_dev = (PCIIDEState *)pci_dev;
+ qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
@@ -3068,9 +3125,14 @@ static void pci_ide_save(QEMUFile* f, void *opaque)
for(i = 0; i < 2; i++) {
BMDMAState *bm = &d->bmdma[i];
+ uint8_t ifidx;
qemu_put_8s(f, &bm->cmd);
qemu_put_8s(f, &bm->status);
qemu_put_be32s(f, &bm->addr);
+ qemu_put_sbe64s(f, &bm->sector_num);
+ qemu_put_be32s(f, &bm->nsector);
+ ifidx = bm->ide_if ? bm->ide_if - d->ide_if : 0;
+ qemu_put_8s(f, &ifidx);
/* XXX: if a transfer is pending, we do not save it yet */
}
@@ -3094,7 +3156,7 @@ static int pci_ide_load(QEMUFile* f, void *opaque, int version_id)
PCIIDEState *d = opaque;
int ret, i;
- if (version_id != 1)
+ if (version_id != 2)
return -EINVAL;
ret = pci_device_load(&d->dev, f);
if (ret < 0)
@@ -3102,9 +3164,14 @@ static int pci_ide_load(QEMUFile* f, void *opaque, int version_id)
for(i = 0; i < 2; i++) {
BMDMAState *bm = &d->bmdma[i];
+ uint8_t ifidx;
qemu_get_8s(f, &bm->cmd);
qemu_get_8s(f, &bm->status);
qemu_get_be32s(f, &bm->addr);
+ qemu_get_sbe64s(f, &bm->sector_num);
+ qemu_get_be32s(f, &bm->nsector);
+ qemu_get_8s(f, &ifidx);
+ bm->ide_if = &d->ide_if[ifidx];
/* XXX: if a transfer is pending, we do not save it yet */
}
@@ -3212,7 +3279,7 @@ void pci_cmd646_ide_init(PCIBus *bus, BlockDriverState **hd_table,
ide_init2(&d->ide_if[0], hd_table[0], hd_table[1], irq[0]);
ide_init2(&d->ide_if[2], hd_table[2], hd_table[3], irq[1]);
- register_savevm("ide", 0, 1, pci_ide_save, pci_ide_load, d);
+ register_savevm("ide", 0, 2, pci_ide_save, pci_ide_load, d);
qemu_register_reset(cmd646_reset, d);
cmd646_reset(d);
}
@@ -3269,7 +3336,7 @@ void pci_piix3_ide_init(PCIBus *bus, BlockDriverState **hd_table, int devfn,
ide_init_ioport(&d->ide_if[0], 0x1f0, 0x3f6);
ide_init_ioport(&d->ide_if[2], 0x170, 0x376);
- register_savevm("ide", 0, 1, pci_ide_save, pci_ide_load, d);
+ register_savevm("ide", 0, 2, pci_ide_save, pci_ide_load, d);
}
/* hd_table must contain 4 block drivers */
@@ -3308,7 +3375,7 @@ void pci_piix4_ide_init(PCIBus *bus, BlockDriverState **hd_table, int devfn,
ide_init_ioport(&d->ide_if[0], 0x1f0, 0x3f6);
ide_init_ioport(&d->ide_if[2], 0x170, 0x376);
- register_savevm("ide", 0, 1, pci_ide_save, pci_ide_load, d);
+ register_savevm("ide", 0, 2, pci_ide_save, pci_ide_load, d);
}
/***********************************************************/
diff --git a/sysemu.h b/sysemu.h
index 56eb9b3..b390184 100644
--- a/sysemu.h
+++ b/sysemu.h
@@ -128,11 +128,17 @@ typedef enum {
IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO
} BlockInterfaceType;
+typedef enum {
+ BLOCK_ERR_REPORT, BLOCK_ERR_IGNORE, BLOCK_ERR_STOP_ENOSPC,
+ BLOCK_ERR_STOP_ANY
+} BlockInterfaceErrorAction;
+
typedef struct DriveInfo {
BlockDriverState *bdrv;
BlockInterfaceType type;
int bus;
int unit;
+ BlockInterfaceErrorAction onerror;
char serial[21];
} DriveInfo;
@@ -146,6 +152,7 @@ extern DriveInfo drives_table[MAX_DRIVES+1];
extern int drive_get_index(BlockInterfaceType type, int bus, int unit);
extern int drive_get_max_bus(BlockInterfaceType type);
extern const char *drive_get_serial(BlockDriverState *bdrv);
+extern BlockInterfaceErrorAction drive_get_onerror(BlockDriverState *bdrv);
/* serial ports */
diff --git a/vl.c b/vl.c
index 63d954b..426033c 100644
--- a/vl.c
+++ b/vl.c
@@ -2200,6 +2200,17 @@ const char *drive_get_serial(BlockDriverState *bdrv)
return "\0";
}
+BlockInterfaceErrorAction drive_get_onerror(BlockDriverState *bdrv)
+{
+ int index;
+
+ for (index = 0; index < nb_drives; index++)
+ if (drives_table[index].bdrv == bdrv)
+ return drives_table[index].onerror;
+
+ return BLOCK_ERR_REPORT;
+}
+
static void bdrv_format_print(void *opaque, const char *name)
{
fprintf(stderr, " %s", name);
@@ -2222,12 +2233,13 @@ static int drive_init(struct drive_opt *arg, int snapshot,
int max_devs;
int index;
int cache;
- int bdrv_flags;
+ int bdrv_flags, onerror;
char *str = arg->opt;
static const char * const params[] = { "bus", "unit", "if", "index",
"cyls", "heads", "secs", "trans",
"media", "snapshot", "file",
- "cache", "format", "serial", NULL };
+ "cache", "format", "serial", "werror",
+ NULL };
if (check_params(buf, sizeof(buf), params, str) < 0) {
fprintf(stderr, "qemu: unknown parameter '%s' in '%s'\n",
@@ -2417,6 +2429,26 @@ static int drive_init(struct drive_opt *arg, int snapshot,
if (!get_param_value(serial, sizeof(serial), "serial", str))
memset(serial, 0, sizeof(serial));
+ onerror = BLOCK_ERR_REPORT;
+ if (get_param_value(buf, sizeof(serial), "werror", str)) {
+ if (type != IF_IDE) {
+ fprintf(stderr, "werror is supported only by IDE\n");
+ return -1;
+ }
+ if (!strcmp(buf, "ignore"))
+ onerror = BLOCK_ERR_IGNORE;
+ else if (!strcmp(buf, "enospc"))
+ onerror = BLOCK_ERR_STOP_ENOSPC;
+ else if (!strcmp(buf, "stop"))
+ onerror = BLOCK_ERR_STOP_ANY;
+ else if (!strcmp(buf, "report"))
+ onerror = BLOCK_ERR_REPORT;
+ else {
+ fprintf(stderr, "qemu: '%s' invalid write error action\n", buf);
+ return -1;
+ }
+ }
+
/* compute bus and unit according index */
if (index != -1) {
@@ -2480,6 +2512,7 @@ static int drive_init(struct drive_opt *arg, int snapshot,
drives_table[nb_drives].type = type;
drives_table[nb_drives].bus = bus_id;
drives_table[nb_drives].unit = unit_id;
+ drives_table[nb_drives].onerror = onerror;
strncpy(drives_table[nb_drives].serial, serial, sizeof(serial));
nb_drives++;
--
Gleb.
next reply other threads:[~2009-01-20 10:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-20 10:56 Gleb Natapov [this message]
2009-01-20 14:01 ` [Qemu-devel] [PATCH v4] Stop VM on ENOSPC error Ian Jackson
2009-01-20 14:16 ` Gleb Natapov
2009-01-20 14:57 ` Ian Jackson
2009-01-20 15:31 ` Gleb Natapov
2009-01-20 16:50 ` Ian Jackson
2009-01-20 18:19 ` Jamie Lokier
2009-01-20 18:23 ` Gleb Natapov
2009-01-21 16:37 ` Ian Jackson
2009-01-21 17:00 ` Gleb Natapov
2009-01-21 17:25 ` Ian Jackson
2009-01-21 18:01 ` Gleb Natapov
2009-01-22 12:39 ` Ian Jackson
2009-01-21 19:00 ` Anthony Liguori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090120105610.GB27675@redhat.com \
--to=gleb@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.