From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 002/013] sh-sci: allow single port platform devices
Date: Wed, 21 Jan 2009 15:13:50 +0000 [thread overview]
Message-ID: <20090121151350.29269.50560.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
Allow registration of single port sh-sci platform devices.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
drivers/serial/sh-sci.c | 125 +++++++++++++++++++++++++++--------------------
1 file changed, 72 insertions(+), 53 deletions(-)
--- 0002/drivers/serial/sh-sci.c
+++ work/drivers/serial/sh-sci.c 2009-01-19 20:09:21.000000000 +0900
@@ -1234,6 +1234,70 @@ static int __devexit sci_remove(struct p
return 0;
}
+static int __devinit sci_probe_single(struct platform_device *dev,
+ unsigned int index,
+ struct plat_sci_port *p,
+ struct sci_port *sciport)
+{
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ unsigned long flags;
+ int ret;
+
+ /* Sanity check */
+ if (unlikely(index >= SCI_NPORTS)) {
+ dev_notice(&dev->dev, "Attempting to register port "
+ "%d when only %d are available.\n",
+ index+1, SCI_NPORTS);
+ dev_notice(&dev->dev, "Consider bumping "
+ "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ return 0;
+ }
+
+ sciport->port.mapbase = p->mapbase;
+
+ if (p->mapbase && !p->membase) {
+ if (p->flags & UPF_IOREMAP) {
+ p->membase = ioremap_nocache(p->mapbase, 0x40);
+ if (IS_ERR(p->membase))
+ return PTR_ERR(p->membase);
+ } else {
+ /*
+ * For the simple (and majority of) cases
+ * where we don't need to do any remapping,
+ * just cast the cookie directly.
+ */
+ p->membase = (void __iomem *)p->mapbase;
+ }
+ }
+
+ sciport->port.membase = p->membase;
+
+ sciport->port.irq = p->irqs[SCIx_TXI_IRQ];
+ sciport->port.flags = p->flags;
+ sciport->port.dev = &dev->dev;
+
+ sciport->type = sciport->port.type = p->type;
+
+ memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
+
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+
+ if (ret) {
+ if (p->flags & UPF_IOREMAP)
+ iounmap(p->membase);
+
+ return ret;
+ }
+
+ INIT_LIST_HEAD(&sciport->node);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ list_add(&sciport->node, &priv->ports);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
/*
* Register a set of serial devices attached to a platform device. The
* list is terminated with a zero flags entry, which means we expect
@@ -1245,7 +1309,6 @@ static int __devinit sci_probe(struct pl
struct plat_sci_port *p = dev->dev.platform_data;
struct sh_sci_priv *priv;
int i, ret = -EINVAL;
- unsigned long flags;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -1260,60 +1323,16 @@ static int __devinit sci_probe(struct pl
cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
#endif
- for (i = 0; p && p->flags != 0; p++, i++) {
- struct sci_port *sciport = &sci_ports[i];
-
- /* Sanity check */
- if (unlikely(i = SCI_NPORTS)) {
- dev_notice(&dev->dev, "Attempting to register port "
- "%d when only %d are available.\n",
- i+1, SCI_NPORTS);
- dev_notice(&dev->dev, "Consider bumping "
- "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
- break;
- }
-
- sciport->port.mapbase = p->mapbase;
-
- if (p->mapbase && !p->membase) {
- if (p->flags & UPF_IOREMAP) {
- p->membase = ioremap_nocache(p->mapbase, 0x40);
- if (IS_ERR(p->membase)) {
- ret = PTR_ERR(p->membase);
- goto err_unreg;
- }
- } else {
- /*
- * For the simple (and majority of) cases
- * where we don't need to do any remapping,
- * just cast the cookie directly.
- */
- p->membase = (void __iomem *)p->mapbase;
- }
- }
-
- sciport->port.membase = p->membase;
-
- sciport->port.irq = p->irqs[SCIx_TXI_IRQ];
- sciport->port.flags = p->flags;
- sciport->port.dev = &dev->dev;
-
- sciport->type = sciport->port.type = p->type;
-
- memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
-
- ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
-
- if (ret && (p->flags & UPF_IOREMAP)) {
- iounmap(p->membase);
+ if (dev->id != -1) {
+ ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
+ if (ret)
goto err_unreg;
+ } else {
+ for (i = 0; p && p->flags != 0; p++, i++) {
+ ret = sci_probe_single(dev, i, p, &sci_ports[i]);
+ if (ret)
+ goto err_unreg;
}
-
- INIT_LIST_HEAD(&sciport->node);
-
- spin_lock_irqsave(&priv->lock, flags);
- list_add(&sciport->node, &priv->ports);
- spin_unlock_irqrestore(&priv->lock, flags);
}
#ifdef CONFIG_SH_STANDARD_BIOS
reply other threads:[~2009-01-21 15:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090121151350.29269.50560.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.