From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 006/013] sh-sci: ioremap() in a single place
Date: Wed, 21 Jan 2009 15:14:22 +0000 [thread overview]
Message-ID: <20090121151422.29269.32455.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
Handle ioremap() in sci_config_port only.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
drivers/serial/sh-sci.c | 47 ++++++++++++-----------------------------------
1 file changed, 12 insertions(+), 35 deletions(-)
--- 0006/drivers/serial/sh-sci.c
+++ work/drivers/serial/sh-sci.c 2009-01-21 19:21:15.000000000 +0900
@@ -992,16 +992,19 @@ static void sci_config_port(struct uart_
port->type = s->type;
- if (port->flags & UPF_IOREMAP && !port->membase) {
+ if (port->membase)
+ return;
+
+ if (port->flags & UPF_IOREMAP) {
#if defined(CONFIG_SUPERH64)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
port->membase = (void __iomem *)port->mapbase;
#else
port->membase = ioremap_nocache(port->mapbase, 0x40);
#endif
-
dev_err(port->dev, "can't remap port#%d\n", port->line);
- }
+ } else
+ port->membase = (void __iomem *)port->mapbase;
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
@@ -1040,9 +1043,9 @@ static struct uart_ops sci_uart_ops = {
#endif
};
-static int __devinit sci_init_single(struct sci_port *sci_port,
- unsigned int index,
- struct plat_sci_port *p)
+static void __devinit sci_init_single(struct sci_port *sci_port,
+ unsigned int index,
+ struct plat_sci_port *p)
{
sci_port->port.ops = &sci_uart_ops;
sci_port->port.iotype = UPIO_MEM;
@@ -1073,22 +1076,6 @@ static int __devinit sci_init_single(str
init_timer(&sci_port->break_timer);
sci_port->port.mapbase = p->mapbase;
-
- if (p->mapbase && !p->membase) {
- if (p->flags & UPF_IOREMAP) {
- p->membase = ioremap_nocache(p->mapbase, 0x40);
- if (IS_ERR(p->membase))
- return PTR_ERR(p->membase);
- } else {
- /*
- * For the simple (and majority of) cases
- * where we don't need to do any remapping,
- * just cast the cookie directly.
- */
- p->membase = (void __iomem *)p->mapbase;
- }
- }
-
sci_port->port.membase = p->membase;
sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
@@ -1096,8 +1083,6 @@ static int __devinit sci_init_single(str
sci_port->type = sci_port->port.type = p->type;
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
-
- return 0;
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
@@ -1160,8 +1145,7 @@ static int __init serial_console_setup(s
sci_port->clk = clk_get(NULL, "module_clk");
#endif
- if (port->flags & UPF_IOREMAP)
- sci_config_port(port, 0);
+ sci_config_port(port, 0);
if (sci_port->enable)
sci_port->enable(port);
@@ -1255,18 +1239,11 @@ static int __devinit sci_probe_single(st
}
sciport->port.dev = &dev->dev;
- ret = sci_init_single(sciport, index, p);
- if (ret)
- return ret;
+ sci_init_single(sciport, index, p);
ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
-
- if (ret) {
- if (p->flags & UPF_IOREMAP)
- iounmap(p->membase);
-
+ if (ret)
return ret;
- }
INIT_LIST_HEAD(&sciport->node);
reply other threads:[~2009-01-21 15:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090121151422.29269.32455.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.