From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Bartha Date: Sat, 24 Jan 2009 19:49:42 +0100 Subject: [ath9k-devel] ath9k WMP300nv2 (AR5416) Message-ID: <20090124184942.256880@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hello to ath9k developers i am using: Distribution: gentoo Kernel: 2.6.28-r1 Linux-Headers: 2.6.28-r1 Wireless Card: Linksys WMP300n v2 European Router: Linksys WRT160n i have tested wmp300nv2 European Version without any luck. I have tried to compile the kernel in that way you told on the the web site(ath9k howto). At your howto is Networking ---> Wireless ---> Improved wireless configuration API Generic IEEE 802.11 Networking Stack (mac80211) both as Module when i tried both as module i cant load mac80211 or cfg80211 so ath9k fails also. One time i get it to work (with kernel 2.6.27-r7) (cfg80211 and mac80211 directly in the kernel not as module) but with only 8MB/sec Bandwith and channel 12 and 13 was not able to access. I need channel 12 or 13 cause in the neibourhood are much wireless routers and none of this routers uses channel 12 or 13 so at these channels i get the stablest and speedest network. Please can you help me with a working kernel config an tell me which packeges i have to install that my linksys wmp300nv2 card could work at 80211N 130MB/sec with support for all channel inkluding channel 12 and 13. Sorry for these ugly english. Sorry for these mail but i tried many times to build my kernel without any luck on the linksys card. I have attached my kernel config. Thanks for helping. -- Psssst! Schon vom neuen GMX MultiMessenger geh?rt? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger -------------- next part -------------- A non-text attachment was scrubbed... Name: config-2.6.28-r1-6 Type: application/octet-stream Size: 58194 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090124/e76cb864/attachment-0001.obj