From: "Alina Friedrichsen" <x-alina@gmx.net>
To: linux-wireless@vger.kernel.org, linville@tuxdriver.com,
johannes@sipsolutions.net
Subject: [PATCH v3] b43: Accessing the TSF via mac80211
Date: Sun, 25 Jan 2009 15:28:28 +0100 [thread overview]
Message-ID: <20090125142828.136280@gmx.net> (raw)
This allows the mac80211 high level code to access the TSF. This is e.g=
=2E needed for BSSID merges in the IBSS mode.
The second version adds locking and removes the now unnecessary debugfs=
entries.
Thanks to Michael Buesch! :)
Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
---
diff -urN wireless-testing.orig/drivers/net/wireless/b43/debugfs.c wire=
less-testing/drivers/net/wireless/b43/debugfs.c
--- wireless-testing.orig/drivers/net/wireless/b43/debugfs.c 2009-01-25=
06:12:13.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/debugfs.c 2009-01-25 14:3=
8:30.000000000 +0100
@@ -367,34 +367,6 @@
return 0;
}
=20
-/* wl->irq_lock is locked */
-static ssize_t tsf_read_file(struct b43_wldev *dev,
- char *buf, size_t bufsize)
-{
- ssize_t count =3D 0;
- u64 tsf;
-
- b43_tsf_read(dev, &tsf);
- fappend("0x%08x%08x\n",
- (unsigned int)((tsf & 0xFFFFFFFF00000000ULL) >> 32),
- (unsigned int)(tsf & 0xFFFFFFFFULL));
-
- return count;
-}
-
-/* wl->irq_lock is locked */
-static int tsf_write_file(struct b43_wldev *dev,
- const char *buf, size_t count)
-{
- u64 tsf;
-
- if (sscanf(buf, "%llu", (unsigned long long *)(&tsf)) !=3D 1)
- return -EINVAL;
- b43_tsf_write(dev, tsf);
-
- return 0;
-}
-
static ssize_t txstat_read_file(struct b43_wldev *dev,
char *buf, size_t bufsize)
{
@@ -691,7 +663,6 @@
B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1);
B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_=
file, 1);
B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1);
-B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1);
B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0);
B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1);
B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0);
@@ -805,7 +776,6 @@
ADD_FILE(mmio16write, 0200);
ADD_FILE(mmio32read, 0600);
ADD_FILE(mmio32write, 0200);
- ADD_FILE(tsf, 0600);
ADD_FILE(txstat, 0400);
ADD_FILE(restart, 0200);
ADD_FILE(loctls, 0400);
@@ -834,7 +804,6 @@
debugfs_remove(e->file_mmio16write.dentry);
debugfs_remove(e->file_mmio32read.dentry);
debugfs_remove(e->file_mmio32write.dentry);
- debugfs_remove(e->file_tsf.dentry);
debugfs_remove(e->file_txstat.dentry);
debugfs_remove(e->file_restart.dentry);
debugfs_remove(e->file_loctls.dentry);
diff -urN wireless-testing.orig/drivers/net/wireless/b43/debugfs.h wire=
less-testing/drivers/net/wireless/b43/debugfs.h
--- wireless-testing.orig/drivers/net/wireless/b43/debugfs.h 2009-01-25=
06:12:13.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/debugfs.h 2009-01-25 14:3=
9:33.000000000 +0100
@@ -46,7 +46,6 @@
struct b43_dfs_file file_mmio16write;
struct b43_dfs_file file_mmio32read;
struct b43_dfs_file file_mmio32write;
- struct b43_dfs_file file_tsf;
struct b43_dfs_file file_txstat;
struct b43_dfs_file file_txpower_g;
struct b43_dfs_file file_restart;
diff -urN wireless-testing.orig/drivers/net/wireless/b43/main.c wireles=
s-testing/drivers/net/wireless/b43/main.c
--- wireless-testing.orig/drivers/net/wireless/b43/main.c 2009-01-25 06=
:12:13.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/main.c 2009-01-25 15:22:0=
7.000000000 +0100
@@ -3177,6 +3177,43 @@
return 0;
}
=20
+static u64 b43_op_get_tsf(struct ieee80211_hw *hw)
+{
+ struct b43_wl *wl =3D hw_to_b43_wl(hw);
+ struct b43_wldev *dev;
+ u64 tsf;
+
+ mutex_lock(&wl->mutex);
+ spin_lock_irq(&wl->irq_lock);
+ dev =3D wl->current_dev;
+
+ if (dev && (b43_status(dev) >=3D B43_STAT_INITIALIZED))
+ b43_tsf_read(dev, &tsf);
+ else
+ tsf =3D 0;
+
+ spin_unlock_irq(&wl->irq_lock);
+ mutex_unlock(&wl->mutex);
+
+ return tsf;
+}
+
+static void b43_op_set_tsf(struct ieee80211_hw *hw, u64 tsf)
+{
+ struct b43_wl *wl =3D hw_to_b43_wl(hw);
+ struct b43_wldev *dev;
+
+ mutex_lock(&wl->mutex);
+ spin_lock_irq(&wl->irq_lock);
+ dev =3D wl->current_dev;
+
+ if (dev && (b43_status(dev) >=3D B43_STAT_INITIALIZED))
+ b43_tsf_write(dev, tsf);
+
+ spin_unlock_irq(&wl->irq_lock);
+ mutex_unlock(&wl->mutex);
+}
+
static void b43_put_phy_into_reset(struct b43_wldev *dev)
{
struct ssb_device *sdev =3D dev->dev;
@@ -4296,6 +4333,8 @@
.set_key =3D b43_op_set_key,
.get_stats =3D b43_op_get_stats,
.get_tx_stats =3D b43_op_get_tx_stats,
+ .get_tsf =3D b43_op_get_tsf,
+ .set_tsf =3D b43_op_set_tsf,
.start =3D b43_op_start,
.stop =3D b43_op_stop,
.set_tim =3D b43_op_beacon_set_tim,
--=20
Psssst! Schon vom neuen GMX MultiMessenger geh=F6rt? Der kann`s mit all=
en: http://www.gmx.net/de/go/multimessenger
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2009-01-25 14:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-25 14:28 Alina Friedrichsen [this message]
2009-01-25 14:35 ` [PATCH v3] b43: Accessing the TSF via mac80211 Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090125142828.136280@gmx.net \
--to=x-alina@gmx.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.