From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: mcgrof@gmail.com, Sujith.Manoharan@atheros.com, tomasw@gmail.com
Subject: [RFC/RFT 5/7] mac80211: fix race in TX aggregation
Date: Mon, 26 Jan 2009 19:47:45 +0100 [thread overview]
Message-ID: <20090126184925.500822996@sipsolutions.net> (raw)
In-Reply-To: 20090126184740.036240879@sipsolutions.net
When disabling TX aggregation because it was rejected, there
is a window where we first set the state to operation. unlock,
and then undo the whole thing. Avoid that by splitting up the
stop function.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/agg-tx.c | 69 +++++++++++++++++++++++++++++++-------------------
1 file changed, 43 insertions(+), 26 deletions(-)
--- wireless-testing.orig/net/mac80211/agg-tx.c 2009-01-26 12:37:13.000000000 +0100
+++ wireless-testing/net/mac80211/agg-tx.c 2009-01-26 12:45:13.000000000 +0100
@@ -186,6 +186,9 @@ int ieee80211_start_tx_ba_session(struct
u8 *state;
int ret = 0;
+ if (WARN_ON(!local->ops->ampdu_action))
+ return -EINVAL;
+
if ((tid >= STA_TID_NUM) || !(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
return -EINVAL;
@@ -266,9 +269,8 @@ int ieee80211_start_tx_ba_session(struct
/* This is slightly racy because the queue isn't stopped */
start_seq_num = sta->tid_seq[tid];
- if (local->ops->ampdu_action)
- ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
- &sta->sta, tid, &start_seq_num);
+ ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
+ &sta->sta, tid, &start_seq_num);
if (ret) {
/* No need to requeue the packets in the agg queue, since we
@@ -400,6 +402,34 @@ void ieee80211_start_tx_ba_cb_irqsafe(st
EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
+static int __ieee80211_stop_tx_ba_session(struct ieee80211_local *local,
+ struct sta_info *sta, u16 tid,
+ enum ieee80211_back_parties initiator)
+{
+ int ret;
+ u8 *state;
+
+ state = &sta->ampdu_mlme.tid_state_tx[tid];
+
+ if (local->hw.ampdu_queues)
+ ieee80211_stop_queue(&local->hw, sta->tid_to_tx_q[tid]);
+
+ *state = HT_AGG_STATE_REQ_STOP_BA_MSK |
+ (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
+
+ ret = local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_STOP,
+ &sta->sta, tid, NULL);
+
+ /* HW shall not deny going back to legacy */
+ if (WARN_ON(ret)) {
+ *state = HT_AGG_STATE_OPERATIONAL;
+ if (local->hw.ampdu_queues)
+ ieee80211_wake_queue(&local->hw, sta->tid_to_tx_q[tid]);
+ }
+
+ return ret;
+}
+
int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
u8 *ra, u16 tid,
enum ieee80211_back_parties initiator)
@@ -409,6 +439,9 @@ int ieee80211_stop_tx_ba_session(struct
u8 *state;
int ret = 0;
+ if (WARN_ON(!local->ops->ampdu_action))
+ return -EINVAL;
+
if (tid >= STA_TID_NUM)
return -EINVAL;
@@ -425,7 +458,7 @@ int ieee80211_stop_tx_ba_session(struct
if (*state != HT_AGG_STATE_OPERATIONAL) {
ret = -ENOENT;
- goto stop_BA_exit;
+ goto unlock;
}
#ifdef CONFIG_MAC80211_HT_DEBUG
@@ -433,27 +466,13 @@ int ieee80211_stop_tx_ba_session(struct
ra, tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
- if (hw->ampdu_queues)
- ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]);
-
- *state = HT_AGG_STATE_REQ_STOP_BA_MSK |
- (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
+ ret = __ieee80211_stop_tx_ba_session(local, sta, tid, initiator);
- if (local->ops->ampdu_action)
- ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP,
- &sta->sta, tid, NULL);
-
- /* HW shall not deny going back to legacy */
- if (WARN_ON(ret)) {
- *state = HT_AGG_STATE_OPERATIONAL;
- if (hw->ampdu_queues)
- ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
- goto stop_BA_exit;
- }
-
-stop_BA_exit:
+ unlock:
spin_unlock_bh(&sta->lock);
+
rcu_read_unlock();
+
return ret;
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
@@ -609,10 +628,8 @@ void ieee80211_process_addba_resp(struct
spin_unlock_bh(&sta->lock);
} else {
sta->ampdu_mlme.addba_req_num[tid]++;
- /* this will allow the state check in stop_BA_session */
- *state = HT_AGG_STATE_OPERATIONAL;
+ __ieee80211_stop_tx_ba_session(local, sta, tid,
+ WLAN_BACK_INITIATOR);
spin_unlock_bh(&sta->lock);
- ieee80211_stop_tx_ba_session(hw, sta->sta.addr, tid,
- WLAN_BACK_INITIATOR);
}
}
--
next prev parent reply other threads:[~2009-01-26 18:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-26 18:47 [RFC/RFT 0/7] mac80211 aggregation cleanups/fixes Johannes Berg
2009-01-26 18:47 ` [RFC/RFT 1/7] mac80211: remove stray aggregation debugfs definition Johannes Berg
2009-01-26 18:47 ` [RFC/RFT 2/7] mac80211: restructure HT code Johannes Berg
2009-01-26 18:47 ` [RFC/RFT 3/7] mac80211: hardware should not deny going back to legacy Johannes Berg
2009-01-26 18:47 ` [RFC/RFT 4/7] mac80211: document TX aggregation (and small cleanup) Johannes Berg
2009-01-26 18:47 ` Johannes Berg [this message]
2009-01-27 10:38 ` [RFC/RFT 5/7] mac80211: fix race in TX aggregation Johannes Berg
2009-01-26 18:47 ` [RFC/RFT 6/7] mac80211: fix RX aggregation timeouts Johannes Berg
2009-01-27 10:05 ` [RFC/RFT 6/7 v2] " Johannes Berg
2009-01-26 18:47 ` [RFC/RFT 7/7] mac80211: fix aggregation timer lockups Johannes Berg
2009-01-27 9:41 ` Tomas Winkler
2009-01-27 9:52 ` Johannes Berg
2009-01-27 10:38 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090126184925.500822996@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=Sujith.Manoharan@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mcgrof@gmail.com \
--cc=tomasw@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.