All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@elte.hu>
To: Jean Delvare <khali@linux-fr.org>,
	Stephen Hemminger <shemminger@vyatta.com>
Cc: linux-kernel@vger.kernel.org
Subject: [bug] CONFIG_I2C_VIAPRO=y breaks skge
Date: Tue, 27 Jan 2009 16:13:59 +0100	[thread overview]
Message-ID: <20090127151359.GA20369@elte.hu> (raw)


hi,

A -tip testsystem triggered this stuck eth0/skge bug today:

 [   24.787761] skge eth0: enabling interface
 [   24.793177] skge eth0: phy write timeout
 [   24.797035] skge eth0: phy write timeout
 [   24.801019] skge eth0: phy write timeout
 [   24.808325] skge eth0: phy write timeout
 [   24.813019] skge eth0: phy write timeout
 [   24.817019] skge eth0: phy write timeout
 [   24.821131] skge eth0: phy write timeout
 [   24.828610] skge eth0: phy write timeout
 [   24.832834] ADDRCONF(NETDEV_UP): eth0: link is not ready

 [root@centauri ~]# ifconfig 
 eth0     Link encap:Ethernet  HWaddr 00:0C:6E:B3:3D:C6  
          inet addr:10.0.1.22  Bcast:10.0.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12884901885 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12884901885 errors:0 dropped:0 overruns:0 carrier:4294967295
          collisions:4294967295 txqueuelen:1000 
          RX bytes:18446744073709551615 (1.5 EiB)  TX bytes:18446744073709551615 (1.5 EiB)
          Interrupt:17 

(see the weird stats as well)

after a lengthy .config-bisection session i tracked it down to:

   CONFIG_I2C_VIAPRO=y

if that is disabled, the skge driver works fine and the stats look 
healthy:

eth0      Link encap:Ethernet  HWaddr 00:0C:6E:B3:3D:C6  
          inet addr:10.0.1.22  Bcast:10.0.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:6eff:feb3:3dc6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:837 errors:0 dropped:0 overruns:0 frame:0
          TX packets:767 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:128098 (125.0 KiB)  TX bytes:130996 (127.9 KiB)
          Interrupt:17 

Find below the lspci output - it's a pretty old system. I have not tested 
this system for a long time so the bug might have been there forever.

	Ingo

-------------------->
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
00:0a.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)

             reply	other threads:[~2009-01-27 15:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-27 15:13 Ingo Molnar [this message]
2009-01-27 15:27 ` [bug] CONFIG_I2C_VIAPRO=y breaks skge Jean Delvare
2009-01-27 15:44   ` Ingo Molnar
2009-01-27 17:26     ` Jean Delvare
2009-01-29 13:49       ` Ingo Molnar
2009-01-29 14:15         ` Jean Delvare
2009-01-29 14:27           ` Ingo Molnar
2009-01-29 15:14             ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090127151359.GA20369@elte.hu \
    --to=mingo@elte.hu \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shemminger@vyatta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.