From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Michael Schmitz <schmitz@debian.org>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-m68k@vger.kernel.org
Subject: [PATCH 4/4] m68k: cleanup <asm/ide.h>
Date: Tue, 27 Jan 2009 19:03:13 +0100 [thread overview]
Message-ID: <20090127180313.28089.37099.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090127180246.28089.2981.sendpatchset@localhost.localdomain>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: cleanup <asm-m68k/ide.h>
* Remove superfluous <asm/macints.h> include.
* No need to re-define in/out*() macros as they are no longer used
by m68k host drivers.
* readl() and writel() are not used by core IDE code.
* Use raw_*_swapw() directly in {falcon,q40}ide.c and remove
{in,out}sw_swapw() macros.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/falconide.c | 4 ++--
drivers/ide/q40ide.c | 4 ++--
include/asm-m68k/ide.h | 34 ----------------------------------
3 files changed, 4 insertions(+), 38 deletions(-)
Index: b/drivers/ide/falconide.c
===================================================================
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -70,7 +70,7 @@ static void falconide_input_data(ide_dri
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
return insw(data_addr, buf, (len + 1) / 2);
- insw_swapw(data_addr, buf, (len + 1) / 2);
+ raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
static void falconide_output_data(ide_drive_t *drive, struct request *rq,
@@ -81,7 +81,7 @@ static void falconide_output_data(ide_dr
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
return outsw(data_addr, buf, (len + 1) / 2);
- outsw_swapw(data_addr, buf, (len + 1) / 2);
+ raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
/* Atari has a byte-swapped IDE interface */
Index: b/drivers/ide/q40ide.c
===================================================================
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -80,7 +80,7 @@ static void q40ide_input_data(ide_drive_
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
return insw(data_addr, buf, (len + 1) / 2);
- insw_swapw(data_addr, buf, (len + 1) / 2);
+ raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
@@ -91,7 +91,7 @@ static void q40ide_output_data(ide_drive
if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
return outsw(data_addr, buf, (len + 1) / 2);
- outsw_swapw(data_addr, buf, (len + 1) / 2);
+ raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
/* Q40 has a byte-swapped IDE interface */
Index: b/include/asm-m68k/ide.h
===================================================================
--- a/include/asm-m68k/ide.h
+++ b/include/asm-m68k/ide.h
@@ -30,62 +30,28 @@
#define _M68K_IDE_H
#ifdef __KERNEL__
-
-
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/irq.h>
-#ifdef CONFIG_MAC
-#include <asm/macints.h>
-#endif
-
/*
* Get rid of defs from io.h - ide has its private and conflicting versions
* Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
* always use the `raw' MMIO versions
*/
-#undef inb
-#undef inw
-#undef insw
-#undef inl
-#undef insl
-#undef outb
-#undef outw
-#undef outsw
-#undef outl
-#undef outsl
#undef readb
#undef readw
-#undef readl
#undef writeb
#undef writew
-#undef writel
-#define inb in_8
-#define inw in_be16
-#define insw(port, addr, n) raw_insw((u16 *)port, addr, n)
-#define inl in_be32
-#define insl(port, addr, n) raw_insl((u32 *)port, addr, n)
-#define outb(val, port) out_8(port, val)
-#define outw(val, port) out_be16(port, val)
-#define outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
-#define outl(val, port) out_be32(port, val)
-#define outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
#define readb in_8
#define readw in_be16
#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n)
-#define readl in_be32
#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n)
#define writeb(val, port) out_8(port, val)
#define writew(val, port) out_be16(port, val)
#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n)
-#define writel(val, port) out_be32(port, val)
#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n)
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
-#define insw_swapw(port, addr, n) raw_insw_swapw((u16 *)port, addr, n)
-#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n)
-#endif
#endif /* __KERNEL__ */
#endif /* _M68K_IDE_H */
prev parent reply other threads:[~2009-01-27 18:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-27 18:02 [PATCH 0/4] m68k related IDE cleanups Bartlomiej Zolnierkiewicz
2009-01-27 18:02 ` [PATCH 1/4] ide: remove IDE_ARCH_INTR Bartlomiej Zolnierkiewicz
2009-01-27 19:42 ` David D. Kilzer
2009-01-29 4:22 ` Michael Schmitz
2009-02-01 15:53 ` Bartlomiej Zolnierkiewicz
2009-01-27 18:02 ` [PATCH 2/4] ide: remove IDE_ARCH_LOCK Bartlomiej Zolnierkiewicz
2009-02-04 21:27 ` Geert Uytterhoeven
2009-02-05 20:14 ` Bartlomiej Zolnierkiewicz
2009-01-27 18:03 ` [PATCH 3/4] ide: make m68k host drivers use IDE_HFLAG_MMIO Bartlomiej Zolnierkiewicz
2009-01-27 18:03 ` Bartlomiej Zolnierkiewicz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090127180313.28089.37099.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=geert@linux-m68k.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=schmitz@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.