From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: anemo@mba.ocn.ne.jp, dwmw2@infradead.org, ralf@linux-mips.org
Subject: + mtd-rbtx4939-map-driver.patch added to -mm tree
Date: Tue, 27 Jan 2009 13:19:54 -0800 [thread overview]
Message-ID: <200901272119.n0RLJsHG003261@imap1.linux-foundation.org> (raw)
The patch titled
mtd: RBTX4939 map driver
has been added to the -mm tree. Its filename is
mtd-rbtx4939-map-driver.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mtd: RBTX4939 map driver
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
This is a map driver for NOR flash chips on RBTX4939 board.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/mtd/maps/Kconfig | 6
drivers/mtd/maps/Makefile | 1
drivers/mtd/maps/rbtx4939-flash.c | 205 ++++++++++++++++++++++++++++
3 files changed, 212 insertions(+)
diff -puN drivers/mtd/maps/Kconfig~mtd-rbtx4939-map-driver drivers/mtd/maps/Kconfig
--- a/drivers/mtd/maps/Kconfig~mtd-rbtx4939-map-driver
+++ a/drivers/mtd/maps/Kconfig
@@ -542,6 +542,12 @@ config MTD_INTEL_VR_NOR
Map driver for a NOR flash bank located on the Expansion Bus of the
Intel Vermilion Range chipset.
+config MTD_RBTX4939
+ tristate "Map driver for RBTX4939 board"
+ depends on TOSHIBA_RBTX4939 && MTD_CFI && MTD_COMPLEX_MAPPINGS
+ help
+ Map driver for NOR flash chips on RBTX4939 board.
+
config MTD_PLATRAM
tristate "Map driver for platform device RAM (mtd-ram)"
select MTD_RAM
diff -puN drivers/mtd/maps/Makefile~mtd-rbtx4939-map-driver drivers/mtd/maps/Makefile
--- a/drivers/mtd/maps/Makefile~mtd-rbtx4939-map-driver
+++ a/drivers/mtd/maps/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
+obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
diff -puN /dev/null drivers/mtd/maps/rbtx4939-flash.c
--- /dev/null
+++ a/drivers/mtd/maps/rbtx4939-flash.c
@@ -0,0 +1,205 @@
+/*
+ * rbtx4939-flash (based on physmap.c)
+ *
+ * This is a simplified physmap driver with map_init callback function.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2009 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <asm/txx9/rbtx4939.h>
+
+struct rbtx4939_flash_info {
+ struct mtd_info *mtd;
+ struct map_info map;
+#ifdef CONFIG_MTD_PARTITIONS
+ int nr_parts;
+#endif
+};
+
+static int rbtx4939_flash_remove(struct platform_device *dev)
+{
+ struct rbtx4939_flash_info *info;
+
+ info = platform_get_drvdata(dev);
+ if (!info)
+ return 0;
+ platform_set_drvdata(dev, NULL);
+
+ if (info->mtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+ struct rbtx4939_flash_data *pdata = dev->dev.platform_data;
+
+ if (info->nr_parts || pdata->nr_parts)
+ del_mtd_partitions(info->mtd);
+ else
+ del_mtd_device(info->mtd);
+#else
+ del_mtd_device(info->mtd);
+#endif
+ map_destroy(info->mtd);
+ }
+ return 0;
+}
+
+static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", NULL };
+#endif
+
+static int rbtx4939_flash_probe(struct platform_device *dev)
+{
+ struct rbtx4939_flash_data *pdata;
+ struct rbtx4939_flash_info *info;
+ struct resource *res;
+ const char **probe_type;
+ int err = 0;
+ unsigned long size;
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *parts;
+#endif
+
+ pdata = dev->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+ info = devm_kzalloc(&dev->dev, sizeof(struct rbtx4939_flash_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ platform_set_drvdata(dev, info);
+
+ size = resource_size(res);
+ pr_notice("rbtx4939 platform flash device: %pR\n", res);
+
+ if (!devm_request_mem_region(&dev->dev, res->start, size,
+ dev_name(&dev->dev)))
+ return -EBUSY;
+
+ info->map.name = dev_name(&dev->dev);
+ info->map.phys = res->start;
+ info->map.size = size;
+ info->map.bankwidth = pdata->width;
+
+ info->map.virt = devm_ioremap(&dev->dev, info->map.phys, size);
+ if (!info->map.virt)
+ return -EBUSY;
+
+ if (pdata->map_init)
+ (*pdata->map_init)(&info->map);
+ else
+ simple_map_init(&info->map);
+
+ probe_type = rom_probe_types;
+ for (; !info->mtd && *probe_type; probe_type++)
+ info->mtd = do_map_probe(*probe_type, &info->map);
+ if (!info->mtd) {
+ dev_err(&dev->dev, "map_probe failed\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+ info->mtd->owner = THIS_MODULE;
+ if (err)
+ goto err_out;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ err = parse_mtd_partitions(info->mtd, part_probe_types, &parts, 0);
+ if (err > 0) {
+ add_mtd_partitions(info->mtd, parts, err);
+ return 0;
+ }
+
+ if (pdata->nr_parts) {
+ pr_notice("Using rbtx4939 partition information\n");
+ add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
+ return 0;
+ }
+#endif
+
+ add_mtd_device(info->mtd);
+ return 0;
+
+err_out:
+ rbtx4939_flash_remove(dev);
+ return err;
+}
+
+#ifdef CONFIG_PM
+static int rbtx4939_flash_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
+
+ if (info->mtd->suspend)
+ return info->mtd->suspend(info->mtd);
+ return 0;
+}
+
+static int rbtx4939_flash_resume(struct platform_device *dev)
+{
+ struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
+
+ if (info->mtd->resume)
+ info->mtd->resume(info->mtd);
+ return 0;
+}
+
+static void rbtx4939_flash_shutdown(struct platform_device *dev)
+{
+ struct rbtx4939_flash_info *info = platform_get_drvdata(dev);
+
+ if (info->mtd->suspend && info->mtd->resume)
+ if (info->mtd->suspend(info->mtd) == 0)
+ info->mtd->resume(info->mtd);
+}
+#else
+#define rbtx4939_flash_suspend NULL
+#define rbtx4939_flash_resume NULL
+#define rbtx4939_flash_shutdown NULL
+#endif
+
+static struct platform_driver rbtx4939_flash_driver = {
+ .probe = rbtx4939_flash_probe,
+ .remove = rbtx4939_flash_remove,
+ .suspend = rbtx4939_flash_suspend,
+ .resume = rbtx4939_flash_resume,
+ .shutdown = rbtx4939_flash_shutdown,
+ .driver = {
+ .name = "rbtx4939-flash",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rbtx4939_flash_init(void)
+{
+ return platform_driver_register(&rbtx4939_flash_driver);
+}
+
+static void __exit rbtx4939_flash_exit(void)
+{
+ platform_driver_unregister(&rbtx4939_flash_driver);
+}
+
+module_init(rbtx4939_flash_init);
+module_exit(rbtx4939_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RBTX4939 MTD map driver");
+MODULE_ALIAS("platform:rbtx4939-flash");
_
Patches currently in -mm which might be from anemo@mba.ocn.ne.jp are
origin.patch
linux-next.patch
mtd-txx9-add-ndfmc-support.patch
mtd-rbtx4939-add-mtd-support.patch
mtd-rbtx4939-add-mtd-support-fix.patch
mtd-txx9-soc-nand-flash-memory-controller-driver.patch
mtd-rbtx4939-map-driver.patch
atmel_serial-might-lose-modem-status-change.patch
reply other threads:[~2009-01-27 21:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200901272119.n0RLJsHG003261@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=anemo@mba.ocn.ne.jp \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.