All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Sesterhenn <snakebyte@gmx.de>
To: linux-pm@lists.linux-foundation.org
Cc: vandrove@vc.cvut.cz
Subject: Suspend regression, hang after matroxfb
Date: Thu, 29 Jan 2009 13:58:55 +0100	[thread overview]
Message-ID: <20090129125855.GA4597@alice> (raw)

hi,

on this box standby worked with 2.6.28, but is broken with 2.6.29-rc3.

Dmesg of startup
http://www.cccmz.de/~snakebyte/200.log
.config
http://www.cccmz.de/~snakebyte/config_200

When testing the devices 

root@computer-desktop:/sys/power# echo devices > pm_test 
root@computer-desktop:/sys/power# echo standby > state

I get this message: 

[  174.177445] PM: Preparing system for standby sleep
[  174.182706] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  174.186096] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  174.186903] PM: Entering standby sleep
[  174.620476] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  174.621453] sd 2:0:0:0: [sda] Stopping disk
[  174.743784] serial 00:08: disabled
[  174.744389] matroxfb 0000:01:00.0: PCI INT A disabled

and the system does not seem to properly suspend / neither wakeup

root@computer-desktop:~# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 Ethernet controller: Intel Corporation 82556 EtherExpress PRO/100 Smart (rev 03)
00:0c.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:12.0 Multimedia audio controller: Rockwell International Device 4310
00:12.1 Communication controller: Rockwell International Riptide HSF 56k PCI Modem
00:12.2 Input device controller: Rockwell International Device 4312
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)

root@computer-desktop:~# lsmod
Module                  Size  Used by
nfsd                  217580  13 
exportfs                4608  1 nfsd
nfs                   253896  1 
lockd                  66984  2 nfsd,nfs
nfs_acl                 3328  2 nfsd,nfs
auth_rpcgss            36160  2 nfsd,nfs
sunrpc                185716  16 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ipv6                  252276  10 
fuse                   54188  1 
unix                   25404  96

root@computer-desktop:/usr/src/linux# cat /proc/cpuinfo 
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 8
model name	: Pentium III (Coppermine)
stepping	: 3
cpu MHz		: 697.840
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 1395.68
clflush size	: 32
power management:


After PM_VERBOSE enabled the log changes to this:

[ 1968.407273] PM: Syncing filesystems ... done.
[ 1968.424490] PM: Preparing system for standby sleep
[ 1968.431142] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1968.434866] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1968.435887] PM: Entering standby sleep
[ 1968.436580] agpgart-intel 0000:00:00.0: preparing suspend
[ 1968.436683] pci 0000:00:01.0: preparing suspend
[ 1968.436788] pci 0000:00:07.0: preparing suspend
[ 1968.436877] ata_piix 0000:00:07.1: preparing suspend
[ 1968.436998] uhci_hcd 0000:00:07.2: preparing suspend
[ 1968.437091] piix4_smbus 0000:00:07.3: preparing suspend
[ 1968.437213] pci 0000:00:0a.0: preparing suspend
[ 1968.437301] aic7xxx 0000:00:0c.0: preparing suspend
[ 1968.437420] 8139too 0000:00:0e.0: preparing suspend
[ 1968.437511] RIPTIDE 0000:00:12.0: preparing suspend
[ 1968.437617] pci 0000:00:12.1: preparing suspend
[ 1968.437705] pci 0000:00:12.2: preparing suspend
[ 1968.437807] matroxfb 0000:01:00.0: preparing suspend
[ 1968.438056] platform pcspkr: preparing suspend
[ 1968.438166] platform microcode: preparing suspend
[ 1968.438321] vga16fb vga16fb.0: preparing suspend
[ 1968.442065] serial8250 serial8250: preparing suspend
[ 1968.442857] usb usb1: preparing type suspend, may wakeup
[ 1968.442995] i8042 i8042: preparing suspend
[ 1968.443144] rtc-test rtc-test.0: preparing suspend
[ 1968.443256] rtc-test rtc-test.1: preparing suspend
[ 1968.443785] ac97 0-0:unknown codec: legacy suspend
[ 1968.443960] fschmd 3-0073: legacy suspend
[ 1968.444151] rtc rtc2: legacy class suspend
[ 1968.444252] rtc-test rtc-test.1: suspend
[ 1968.444351] rtc rtc1: legacy class suspend
[ 1968.444501] rtc-test rtc-test.0: suspend
[ 1968.444638] rtc rtc0: legacy class suspend
[ 1968.444883] atkbd serio0: legacy suspend
[ 1968.872096] i8042 i8042: suspend
[ 1968.872384] usb usb1: type suspend, may wakeup
[ 1968.872581] sd 2:0:0:0: legacy suspend
[ 1968.872881] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1968.873883] sd 2:0:0:0: [sda] Stopping disk
[ 1968.992131] scsi 1:0:0:0: legacy suspend
[ 1968.992852] serial8250 serial8250: suspend
[ 1968.992997] drm card0: legacy class suspend
[ 1968.996728] vga16fb vga16fb.0: suspend
[ 1968.996920] platform microcode: suspend
[ 1968.997059] platform pcspkr: suspend
[ 1968.997256] serial 00:08: legacy suspend
[ 1968.998043] serial 00:08: disabled
[ 1968.998213] pnp 00:07: legacy suspend
[ 1968.998343] i8042 kbd 00:06: legacy suspend
[ 1968.998498] pnp 00:05: legacy suspend
[ 1968.998626] pnp 00:04: legacy suspend
[ 1968.998754] rtc_cmos 00:03: legacy suspend, may wakeup
[ 1968.998980] pnp 00:02: legacy suspend
[ 1968.999109] system 00:01: legacy suspend
[ 1968.999262] pnp 00:00: legacy suspend
[ 1968.999410] matroxfb 0000:01:00.0: suspend
[ 1968.999737] matroxfb 0000:01:00.0: PCI INT A disabled

I am not sure if a bisection makes sense
with all those suspend bugs.


Greetings Eric

             reply	other threads:[~2009-01-29 12:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-29 12:58 Eric Sesterhenn [this message]
2009-01-29 22:12 ` Suspend regression, hang after matroxfb Rafael J. Wysocki
2009-01-29 22:12 ` [linux-pm] " Rafael J. Wysocki
     [not found]   ` <200901292312.44884.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 12:46     ` Eric Sesterhenn
2009-01-30 21:15       ` Rafael J. Wysocki
2009-01-30 21:15       ` [linux-pm] " Rafael J. Wysocki
2009-01-30 22:03         ` Rafael J. Wysocki
     [not found]         ` <200901302215.28057.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 22:03           ` [linux-pm] " Rafael J. Wysocki
2009-01-30 22:09             ` Eric Sesterhenn
     [not found]             ` <200901302303.23143.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 22:09               ` [linux-pm] " Eric Sesterhenn
2009-01-30 22:06           ` Eric Sesterhenn
2009-01-30 22:27             ` Rafael J. Wysocki
2009-01-30 22:27             ` [linux-pm] " Rafael J. Wysocki
     [not found]               ` <200901302327.50887.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 22:31                 ` Eric Sesterhenn
2009-01-30 22:59                   ` Rafael J. Wysocki
2009-01-30 23:21                     ` Alan Stern
     [not found]                     ` <200901302359.18309.rjw-KKrjLPT3xs0@public.gmane.org>
2009-01-30 23:21                       ` [linux-pm] " Alan Stern
2009-01-30 23:40                         ` Rafael J. Wysocki
     [not found]                         ` <Pine.LNX.4.44L0.0901301818400.2785-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2009-01-30 23:40                           ` [linux-pm] " Rafael J. Wysocki
2009-01-30 23:36                       ` Eric Sesterhenn
2009-01-30 23:36                     ` Eric Sesterhenn
2009-01-30 22:59                   ` Rafael J. Wysocki
2009-01-30 22:31               ` Eric Sesterhenn
2009-01-30 22:06         ` Eric Sesterhenn
2009-01-30 12:46   ` Eric Sesterhenn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090129125855.GA4597@alice \
    --to=snakebyte@gmx.de \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=vandrove@vc.cvut.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.