From: Dan Williams <dan.j.williams@intel.com>
To: hskinnemoen@atmel.com
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>,
kernel@avr32linux.org, linux-kernel@vger.kernel.org
Subject: [PATCH] atmel-mci: fix initialization of dma slave data
Date: Fri, 30 Jan 2009 16:05:57 -0700 [thread overview]
Message-ID: <20090130230248.2402.65405.stgit@dwillia2-linux.ch.intel.com> (raw)
The conversion of atmel-mci to dma_request_channel missed the initialization
of the channel dma_slave information. dma_request_channel, along with the
filter_fn, find the channel with the proper capabilities, then it is up to the
driver to update the dw_dma_chan with its slave data.
Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
Haavard,
I do not have any conflicting dmaengine patches so feel free to carry
this through the avr32 tree.
Regards,
Dan
drivers/dma/dw_dmac_regs.h | 24 ------------------------
drivers/mmc/host/atmel-mci.c | 1 +
include/linux/dw_dmac.h | 33 +++++++++++++++++++++++++++++++++
3 files changed, 34 insertions(+), 24 deletions(-)
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 00fdd18..10ffa5c 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -126,24 +126,6 @@ struct dw_dma_regs {
#define DW_REGLEN 0x400
-struct dw_dma_chan {
- struct dma_chan chan;
- void __iomem *ch_regs;
- u8 mask;
-
- spinlock_t lock;
-
- /* these other elements are all protected by lock */
- dma_cookie_t completed;
- struct list_head active_list;
- struct list_head queue;
- struct list_head free_list;
-
- struct dw_dma_slave *dws;
-
- unsigned int descs_allocated;
-};
-
static inline struct dw_dma_chan_regs __iomem *
__dwc_regs(struct dw_dma_chan *dwc)
{
@@ -155,12 +137,6 @@ __dwc_regs(struct dw_dma_chan *dwc)
#define channel_writel(dwc, name, val) \
__raw_writel((val), &(__dwc_regs(dwc)->name))
-static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
-{
- return container_of(chan, struct dw_dma_chan, chan);
-}
-
-
struct dw_dma {
struct dma_device dma;
void __iomem *regs;
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 76bfe16..2a81d46 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1618,6 +1618,7 @@ static int __init atmci_probe(struct platform_device *pdev)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
host->dma.chan = dma_request_channel(mask, filter, dws);
+ set_dw_dma_slave(host->dma.chan, dws);
}
if (!host->dma.chan)
dev_notice(&pdev->dev, "DMA not available, using PIO\n");
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
index d797dde..799b6ef 100644
--- a/include/linux/dw_dmac.h
+++ b/include/linux/dw_dmac.h
@@ -54,6 +54,39 @@ struct dw_dma_slave {
u32 cfg_lo;
};
+struct dw_dma_chan {
+ struct dma_chan chan;
+ void __iomem *ch_regs;
+ u8 mask;
+
+ spinlock_t lock;
+
+ /* these other elements are all protected by lock */
+ dma_cookie_t completed;
+ struct list_head active_list;
+ struct list_head queue;
+ struct list_head free_list;
+
+ struct dw_dma_slave *dws;
+
+ unsigned int descs_allocated;
+};
+
+static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
+{
+ return container_of(chan, struct dw_dma_chan, chan);
+}
+
+static inline void set_dw_dma_slave(struct dma_chan *chan, struct dw_dma_slave *dws)
+{
+ if (chan) {
+ struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
+
+ dwc->dws = dws;
+ }
+}
+
+
/* Platform-configurable bits in CFG_HI */
#define DWC_CFGH_FCMODE (1 << 0)
#define DWC_CFGH_FIFO_MODE (1 << 1)
next reply other threads:[~2009-01-30 23:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-30 23:05 Dan Williams [this message]
2009-01-31 12:06 ` [PATCH] atmel-mci: fix initialization of dma slave data Atsushi Nemoto
2009-01-31 14:52 ` Atsushi Nemoto
2009-01-31 16:26 ` Dan Williams
2009-02-02 15:01 ` Hans-Christian Egtvedt
2009-02-02 16:04 ` Atsushi Nemoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090130230248.2402.65405.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=anemo@mba.ocn.ne.jp \
--cc=hskinnemoen@atmel.com \
--cc=kernel@avr32linux.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.