From: Catalin Marinas <catalin.marinas@arm.com>
To: linux-mtd@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>,
David Woodhouse <dwmw2@infradead.org>
Subject: [PATCH] Add armflash support for multiple blocks of flash
Date: Mon, 09 Feb 2009 18:05:04 +0000 [thread overview]
Message-ID: <20090209180504.27367.52854.stgit@pc1117.cambridge.arm.com> (raw)
This patch adds MTD concatenation support to integrator-flash.c for
platforms with more than one block of flash memory (e.g. RealView
PB11MPCore). The implementation is based on the sa1100-flash.c one.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
---
drivers/mtd/maps/integrator-flash.c | 226 +++++++++++++++++++++++++----------
1 files changed, 164 insertions(+), 62 deletions(-)
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index d2ec262..756d0de 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -35,28 +35,34 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
-#ifdef CONFIG_ARCH_P720T
-#define FLASH_BASE (0x04000000)
-#define FLASH_SIZE (64*1024*1024)
-#endif
+#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2)
-struct armflash_info {
+struct armflash_subdev_info {
+ char name[SUBDEV_NAME_SIZE];
+ struct mtd_info *mtd;
+ struct map_info map;
struct flash_platform_data *plat;
+};
+
+struct armflash_info {
struct resource *res;
struct mtd_partition *parts;
struct mtd_info *mtd;
- struct map_info map;
+ int nr_subdev;
+ struct armflash_subdev_info subdev[0];
};
static void armflash_set_vpp(struct map_info *map, int on)
{
- struct armflash_info *info = container_of(map, struct armflash_info, map);
+ struct armflash_subdev_info *info =
+ container_of(map, struct armflash_subdev_info, map);
if (info->plat && info->plat->set_vpp)
info->plat->set_vpp(on);
@@ -64,32 +70,17 @@ static void armflash_set_vpp(struct map_info *map, int on)
static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
-static int armflash_probe(struct platform_device *dev)
+static int armflash_subdev_probe(struct armflash_subdev_info *subdev,
+ struct resource *res)
{
- struct flash_platform_data *plat = dev->dev.platform_data;
- struct resource *res = dev->resource;
- unsigned int size = res->end - res->start + 1;
- struct armflash_info *info;
- int err;
+ struct flash_platform_data *plat = subdev->plat;
+ resource_size_t size = res->end - res->start + 1;
void __iomem *base;
+ int err = 0;
- info = kzalloc(sizeof(struct armflash_info), GFP_KERNEL);
- if (!info) {
- err = -ENOMEM;
- goto out;
- }
-
- info->plat = plat;
- if (plat && plat->init) {
- err = plat->init();
- if (err)
- goto no_resource;
- }
-
- info->res = request_mem_region(res->start, size, "armflash");
- if (!info->res) {
+ if (!request_mem_region(res->start, size, subdev->name)) {
err = -EBUSY;
- goto no_resource;
+ goto out;
}
base = ioremap(res->start, size);
@@ -101,27 +92,132 @@ static int armflash_probe(struct platform_device *dev)
/*
* look for CFI based flash parts fitted to this board
*/
- info->map.size = size;
- info->map.bankwidth = plat->width;
- info->map.phys = res->start;
- info->map.virt = base;
- info->map.name = dev_name(&dev->dev);
- info->map.set_vpp = armflash_set_vpp;
+ subdev->map.size = size;
+ subdev->map.bankwidth = plat->width;
+ subdev->map.phys = res->start;
+ subdev->map.virt = base;
+ subdev->map.name = subdev->name;
+ subdev->map.set_vpp = armflash_set_vpp;
- simple_map_init(&info->map);
+ simple_map_init(&subdev->map);
/*
* Also, the CFI layer automatically works out what size
* of chips we have, and does the necessary identification
* for us automatically.
*/
- info->mtd = do_map_probe(plat->map_name, &info->map);
- if (!info->mtd) {
+ subdev->mtd = do_map_probe(plat->map_name, &subdev->map);
+ if (!subdev->mtd) {
err = -ENXIO;
goto no_device;
}
- info->mtd->owner = THIS_MODULE;
+ subdev->mtd->owner = THIS_MODULE;
+
+ /* Successful? */
+ if (err == 0)
+ return err;
+
+ if (subdev->mtd)
+ map_destroy(subdev->mtd);
+ no_device:
+ iounmap(base);
+ no_mem:
+ release_mem_region(res->start, size);
+ out:
+ return err;
+}
+
+static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
+{
+ if (subdev->mtd)
+ map_destroy(subdev->mtd);
+ if (subdev->map.virt)
+ iounmap(subdev->map.virt);
+ release_mem_region(subdev->map.phys, subdev->map.size);
+}
+
+static int armflash_probe(struct platform_device *dev)
+{
+ struct flash_platform_data *plat = dev->dev.platform_data;
+ unsigned int size;
+ struct armflash_info *info;
+ int i, nr, err;
+
+ /* Count the number of devices */
+ for (nr = 0; ; nr++)
+ if (!platform_get_resource(dev, IORESOURCE_MEM, nr))
+ break;
+ if (nr == 0) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ size = sizeof(struct armflash_info) +
+ sizeof(struct armflash_subdev_info) * nr;
+ info = kzalloc(size, GFP_KERNEL);
+ if (!info) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ if (plat && plat->init) {
+ err = plat->init();
+ if (err)
+ goto no_resource;
+ }
+
+ for (i = 0; i < nr; i++) {
+ struct armflash_subdev_info *subdev = &info->subdev[i];
+ struct resource *res;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, i);
+ if (!res)
+ break;
+
+ if (nr == 1)
+ /* No MTD concatenation, just use the default name */
+ snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s",
+ dev_name(&dev->dev));
+ else
+ snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d",
+ dev_name(&dev->dev), i);
+ subdev->plat = plat;
+
+ err = armflash_subdev_probe(subdev, res);
+ if (err)
+ break;
+ }
+ info->nr_subdev = i;
+
+ if (err)
+ goto subdev_err;
+
+ if (info->nr_subdev == 1)
+ info->mtd = info->subdev[0].mtd;
+ else if (info->nr_subdev > 1) {
+#ifdef CONFIG_MTD_CONCAT
+ struct mtd_info *cdev[info->nr_subdev];
+
+ /*
+ * We detected multiple devices. Concatenate them together.
+ */
+ for (i = 0; i < info->nr_subdev; i++)
+ cdev[i] = info->subdev[i].mtd;
+
+ info->mtd = mtd_concat_create(cdev, info->nr_subdev,
+ dev_name(&dev->dev));
+ if (info->mtd == NULL)
+ err = -ENXIO;
+#else
+ printk(KERN_ERR "armflash: multiple devices found but "
+ "MTD concat support disabled.\n");
+ err = -ENXIO;
+#endif
+ }
+
+ if (err < 0)
+ goto cleanup;
err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
if (err > 0) {
@@ -131,28 +227,30 @@ static int armflash_probe(struct platform_device *dev)
"mtd partition registration failed: %d\n", err);
}
- if (err == 0)
+ if (err == 0) {
platform_set_drvdata(dev, info);
+ return err;
+ }
/*
- * If we got an error, free all resources.
+ * We got an error, free all resources.
*/
- if (err < 0) {
- if (info->mtd) {
- del_mtd_partitions(info->mtd);
- map_destroy(info->mtd);
- }
- kfree(info->parts);
-
- no_device:
- iounmap(base);
- no_mem:
- release_mem_region(res->start, size);
- no_resource:
- if (plat && plat->exit)
- plat->exit();
- kfree(info);
+ cleanup:
+ if (info->mtd) {
+ del_mtd_partitions(info->mtd);
+#ifdef CONFIG_MTD_CONCAT
+ if (info->mtd != info->subdev[0].mtd)
+ mtd_concat_destroy(info->mtd);
+#endif
}
+ kfree(info->parts);
+ subdev_err:
+ for (i = info->nr_subdev - 1; i >= 0; i--)
+ armflash_subdev_remove(&info->subdev[i]);
+ no_resource:
+ if (plat && plat->exit)
+ plat->exit();
+ kfree(info);
out:
return err;
}
@@ -160,22 +258,26 @@ static int armflash_probe(struct platform_device *dev)
static int armflash_remove(struct platform_device *dev)
{
struct armflash_info *info = platform_get_drvdata(dev);
+ struct flash_platform_data *plat = dev->dev.platform_data;
+ int i;
platform_set_drvdata(dev, NULL);
if (info) {
if (info->mtd) {
del_mtd_partitions(info->mtd);
- map_destroy(info->mtd);
+#ifdef CONFIG_MTD_CONCAT
+ if (info->mtd != info->subdev[0].mtd)
+ mtd_concat_destroy(info->mtd);
+#endif
}
kfree(info->parts);
- iounmap(info->map.virt);
- release_resource(info->res);
- kfree(info->res);
+ for (i = info->nr_subdev - 1; i >= 0; i--)
+ armflash_subdev_remove(&info->subdev[i]);
- if (info->plat && info->plat->exit)
- info->plat->exit();
+ if (plat && plat->exit)
+ plat->exit();
kfree(info);
}
next reply other threads:[~2009-02-09 18:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-09 18:05 Catalin Marinas [this message]
2009-03-16 17:31 ` [PATCH] Add armflash support for multiple blocks of flash Catalin Marinas
-- strict thread matches above, loose matches on Subject: below --
2009-04-23 16:41 Catalin Marinas
2009-04-23 16:41 ` Catalin Marinas
2009-04-24 19:59 ` Russell King - ARM Linux
2009-04-25 7:47 ` Artem Bityutskiy
2009-04-25 7:47 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090209180504.27367.52854.stgit@pc1117.cambridge.arm.com \
--to=catalin.marinas@arm.com \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.