From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Felipe Balbi <felipe.balbi@nokia.com>,
David Brownell <dbrownell@users.sourceforge.net>
Subject: [PATCH 2/3] musb_hdrc: Clean-up MUSB init code for next merge window
Date: Thu, 12 Feb 2009 11:17:08 -0800 [thread overview]
Message-ID: <20090212191707.19766.23783.stgit@localhost> (raw)
In-Reply-To: <20090212191408.19766.62874.stgit@localhost>
Let's just use mach/usb.h as mach/musb.h only has one entry.
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 2 +-
arch/arm/mach-omap2/board-rx51.c | 2 +-
arch/arm/plat-omap/include/mach/usb-musb.h | 35 ----------------------------
arch/arm/plat-omap/include/mach/usb.h | 4 ++-
10 files changed, 10 insertions(+), 45 deletions(-)
delete mode 100644 arch/arm/plat-omap/include/mach/usb-musb.h
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index cc65b1a..aa5df72 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,7 +36,7 @@
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/board.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/mcspi.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 8a0dba6..10be03e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -34,7 +34,7 @@
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/board.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <mach/usb-ehci.h>
#include <mach/common.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 73c4504..1e1fd84 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -35,7 +35,7 @@
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <asm/io.h>
#include <asm/delay.h>
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 64c76bd..64fc613 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -38,7 +38,7 @@
#include <asm/mach/flash.h>
#include <mach/board.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <mach/usb-ehci.h>
#include <mach/common.h>
#include <mach/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 775a1f3..4946463 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -31,7 +31,7 @@
#include <mach/gpio.h>
#include <mach/board.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <mach/usb-ehci.h>
#include <mach/common.h>
#include <mach/mcspi.h>
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2637641..cd90bf4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -45,7 +45,7 @@
#include <mach/hardware.h>
#include <mach/nand.h>
#include <mach/usb-ehci.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <mach/mcspi.h>
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c95b890..f600f70 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -46,7 +46,7 @@
#include <mach/hardware.h>
#include <mach/nand.h>
#include <mach/usb-ehci.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "twl4030-generic-scripts.h"
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index e845aac..98dfde1 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -28,7 +28,7 @@
#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
-#include <mach/usb-musb.h>
+#include <mach/usb.h>
#include <asm/io.h>
#include <asm/delay.h>
diff --git a/arch/arm/plat-omap/include/mach/usb-musb.h b/arch/arm/plat-omap/include/mach/usb-musb.h
deleted file mode 100644
index b455b29..0000000
--- a/arch/arm/plat-omap/include/mach/usb-musb.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/usb-musb.h
- *
- * Hardware definitions for Mentor Graphics MUSBMHDRC.
- *
- * Initial creation by Felipe Balbi.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_USB_MUSB_H
-#define __ASM_ARCH_OMAP_USB_MUSB_H
-
-extern void usb_musb_init(void);
-
-#endif /* __ASM_ARCH_OMAP_USB_MUSB_H */
-
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index e078155..7d7b2b0 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,8 +27,8 @@
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-void __init usb_musb_init(void);
-void __init usb_ehci_init(void);
+extern void usb_musb_init(void);
+extern void usb_ehci_init(void);
#endif
next prev parent reply other threads:[~2009-02-12 19:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-12 19:16 [PATCH 0/3] musb_hdrc: Clean-up init code for mainline merge Tony Lindgren
2009-02-12 19:16 ` [PATCH 1/3] musb_hdrc: Set musb_resources dynamically Tony Lindgren
2009-02-12 19:28 ` Felipe Balbi
2009-02-12 19:17 ` Tony Lindgren [this message]
2009-02-12 19:30 ` [PATCH 2/3] musb_hdrc: Clean-up MUSB init code for next merge window Felipe Balbi
2009-02-12 19:44 ` Tony Lindgren
2009-02-12 19:17 ` [PATCH 3/3] musb_hdrc: Build usb-musb based on config entry, clean-up Makefile Tony Lindgren
2009-02-12 19:31 ` Felipe Balbi
2009-02-12 19:21 ` [PATCH 0/3] musb_hdrc: Clean-up init code for mainline merge Tony Lindgren
2009-02-12 19:35 ` Felipe Balbi
2009-02-13 20:50 ` David Brownell
2009-02-12 20:49 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090212191707.19766.23783.stgit@localhost \
--to=tony@atomide.com \
--cc=dbrownell@users.sourceforge.net \
--cc=felipe.balbi@nokia.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.