From: Bob Wilkinson <bob@fourtheye.org>
To: linux-kernel@vger.kernel.org
Subject: [PROBLEM] Multiple BUG: unable to handle kernel paging request
Date: Mon, 16 Feb 2009 21:10:12 +0000 [thread overview]
Message-ID: <20090216211012.GA31416@fourtheye.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 396 bytes --]
Hello
I have been having many problems with the stability of one of
my machines. It does have a lot of attached peripherals, and
regularly crashes. It does not always boot. I have attached as much
information as I know to.
There are multiple
BUG: unable to handle kernel paging request
lines in the kernel log.
I would appreciate being cc:ed on replies since I do not subscribe.
Bob
[-- Attachment #2: ver_linux.op --]
[-- Type: text/plain, Size: 1731 bytes --]
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux italy 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
Gnu C 4.3.3-3)
Gnu make 3.81
binutils Binutils
util-linux 2.13.1.1
mount 2.13.1.1
module-init-tools 3.4
e2fsprogs 1.41.3
PPP 2.4.4
Linux C Library > libc.2.7
Dynamic linker (ldd) 2.7
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 6.10
udev 125
wireless-tools 29
Modules Loaded nls_utf8 isofs zlib_inflate udf nls_base crc_itu_t xt_multiport iptable_filter ip_tables x_tables binfmt_misc ppdev lp ipv6 radeon drm loop snd_bt87x snd_ens1371 gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm parport_pc parport serio_raw psmouse via_ircc irda snd_seq_dummy crc_ccitt i2c_viapro pcspkr tuner_simple tuner_types snd_seq_oss snd_seq_midi snd_rawmidi tuner snd_seq_midi_event snd_seq tvaudio button snd_timer snd_seq_device snd bttv videodev v4l1_compat firmware_class ir_common compat_ioctl32 soundcore i2c_algo_bit snd_page_alloc v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc sd_mod usb_storage dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom ide_disk ata_generic libata scsi_mod dock via82cxxx ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
[-- Attachment #3: kern.log.0 --]
[-- Type: text/plain, Size: 196364 bytes --]
Feb 10 22:50:58 italy kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Feb 10 22:50:58 italy kernel: [ 0.000000] Initializing cgroup subsys cpuset
Feb 10 22:50:58 italy kernel: [ 0.000000] Initializing cgroup subsys cpu
Feb 10 22:50:58 italy kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
Feb 10 22:50:58 italy kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb 10 22:50:58 italy kernel: [ 0.000000] 0MB HIGHMEM available.
Feb 10 22:50:58 italy kernel: [ 0.000000] 767MB LOWMEM available.
Feb 10 22:50:58 italy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Feb 10 22:50:59 italy kernel: [ 0.000000] Zone PFN ranges:
Feb 10 22:50:59 italy kernel: [ 0.000000] DMA 0 -> 4096
Feb 10 22:50:59 italy kernel: [ 0.000000] Normal 4096 -> 196592
Feb 10 22:50:59 italy kernel: [ 0.000000] HighMem 196592 -> 196592
Feb 10 22:50:59 italy kernel: [ 0.000000] Movable zone start PFN for each node
Feb 10 22:50:59 italy kernel: [ 0.000000] early_node_map[1] active PFN ranges
Feb 10 22:50:59 italy kernel: [ 0.000000] 0: 0 -> 196592
Feb 10 22:50:59 italy kernel: [ 0.000000] On node 0 totalpages: 196592
Feb 10 22:50:59 italy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Feb 10 22:50:59 italy kernel: [ 0.000000] DMA zone: 0 pages reserved
Feb 10 22:50:59 italy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Feb 10 22:50:59 italy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Feb 10 22:50:59 italy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Feb 10 22:50:59 italy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Feb 10 22:50:59 italy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Feb 10 22:50:59 italy kernel: [ 0.000000] DMI 2.2 present.
Feb 10 22:50:59 italy kernel: [ 0.000000] ACPI: RSDP 000F62E0, 0014 (r0 VIA694)
Feb 10 22:50:59 italy kernel: [ 0.000000] ACPI: RSDT 2FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 10 22:50:59 italy kernel: [ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 10 22:50:59 italy kernel: [ 0.000000] ACPI: DSDT 2FFF30C0, 3316 (r1 VIA694 AWRDACPI 1000 MSFT 100000E)
Feb 10 22:50:59 italy kernel: [ 0.000000] ACPI: FACS 2FFF0000, 0040
Feb 10 22:50:59 italy kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Feb 10 22:50:59 italy kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
Feb 10 22:50:59 italy kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 10 22:50:59 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Feb 10 22:50:59 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Feb 10 22:50:59 italy kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
Feb 10 22:50:59 italy kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Feb 10 22:50:59 italy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Feb 10 22:50:59 italy kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056
Feb 10 22:50:59 italy kernel: [ 0.000000] Kernel command line: root=/dev/mapper/italy-root ro
Feb 10 22:50:59 italy kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Feb 10 22:50:59 italy kernel: [ 0.000000] mapped APIC to ffffb000 (0160f000)
Feb 10 22:50:59 italy kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Feb 10 22:50:59 italy kernel: [ 0.000000] Initializing CPU#0
Feb 10 22:50:59 italy kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 10 22:50:59 italy kernel: [ 0.000000] Detected 930.687 MHz processor.
Feb 10 22:50:59 italy kernel: [ 0.004000] Console: colour VGA+ 80x25
Feb 10 22:50:59 italy kernel: [ 0.004000] console [tty0] enabled
Feb 10 22:50:59 italy kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 10 22:50:59 italy kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 10 22:50:59 italy kernel: [ 0.004000] Memory: 768324k/786368k available (1769k kernel code, 17452k reserved, 752k data, 244k init, 0k highmem)
Feb 10 22:50:59 italy kernel: [ 0.004000] virtual kernel memory layout:
Feb 10 22:50:59 italy kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Feb 10 22:50:59 italy kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 10 22:50:59 italy kernel: [ 0.004000] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
Feb 10 22:50:59 italy kernel: [ 0.004000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
Feb 10 22:50:59 italy kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Feb 10 22:50:59 italy kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Feb 10 22:50:59 italy kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Feb 10 22:50:59 italy kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 10 22:50:59 italy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Feb 10 22:50:59 italy kernel: [ 0.084276] Calibrating delay using timer specific routine.. 1863.87 BogoMIPS (lpj=3727757)
Feb 10 22:50:59 italy kernel: [ 0.084444] Security Framework initialized
Feb 10 22:50:59 italy kernel: [ 0.084501] SELinux: Disabled at boot.
Feb 10 22:50:59 italy kernel: [ 0.084551] Capability LSM initialized
Feb 10 22:50:59 italy kernel: [ 0.084628] Mount-cache hash table entries: 512
Feb 10 22:50:59 italy kernel: [ 0.084979] Initializing cgroup subsys ns
Feb 10 22:50:59 italy kernel: [ 0.085032] Initializing cgroup subsys cpuacct
Feb 10 22:50:59 italy kernel: [ 0.085081] Initializing cgroup subsys devices
Feb 10 22:50:59 italy kernel: [ 0.085163] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 10 22:50:59 italy kernel: [ 0.085219] CPU: L2 Cache: 256K (64 bytes/line)
Feb 10 22:50:59 italy kernel: [ 0.085269] Intel machine check architecture supported.
Feb 10 22:50:59 italy kernel: [ 0.085320] Intel machine check reporting enabled on CPU#0.
Feb 10 22:50:59 italy kernel: [ 0.085393] Checking 'hlt' instruction... OK.
Feb 10 22:50:59 italy kernel: [ 0.100368] SMP alternatives: switching to UP code
Feb 10 22:50:59 italy kernel: [ 0.114488] Freeing SMP alternatives: 16k freed
Feb 10 22:50:59 italy kernel: [ 0.114546] ACPI: Core revision 20080321
Feb 10 22:50:59 italy kernel: [ 0.123945] ACPI: setting ELCR to 0200 (from 0e00)
Feb 10 22:50:59 italy kernel: [ 0.128008] weird, boot CPU (#0) not listedby the BIOS.
Feb 10 22:50:59 italy kernel: [ 0.128008] SMP motherboard not detected.
Feb 10 22:50:59 italy kernel: [ 0.128008] Local APIC not detected. Using dummy APIC emulation.
Feb 10 22:50:59 italy kernel: [ 0.128008] SMP disabled
Feb 10 22:50:59 italy kernel: [ 0.128008] Brought up 1 CPUs
Feb 10 22:50:59 italy kernel: [ 0.128008] Total of 1 processors activated (1863.87 BogoMIPS).
Feb 10 22:50:59 italy kernel: [ 0.128008] CPU0 attaching sched-domain:
Feb 10 22:50:59 italy kernel: [ 0.128008] domain 0: span 0
Feb 10 22:50:59 italy kernel: [ 0.128008] groups: 0
Feb 10 22:50:59 italy kernel: [ 0.128274] net_namespace: 660 bytes
Feb 10 22:50:59 italy kernel: [ 0.128335] Booting paravirtualized kernel on bare hardware
Feb 10 22:50:59 italy kernel: [ 0.128886] NET: Registered protocol family 16
Feb 10 22:50:59 italy kernel: [ 0.129456] ACPI: bus type pci registered
Feb 10 22:50:59 italy kernel: [ 0.132008] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
Feb 10 22:50:59 italy kernel: [ 0.132081] PCI: Using configuration type 1 for base access
Feb 10 22:50:59 italy kernel: [ 0.132152] Setting up standard PCI resources
Feb 10 22:50:59 italy kernel: [ 0.138306] ACPI: EC: Look up EC in DSDT
Feb 10 22:50:59 italy kernel: [ 0.146645] ACPI: Interpreter enabled
Feb 10 22:50:59 italy kernel: [ 0.146703] ACPI: (supports S0 S1 S4 S5)
Feb 10 22:50:59 italy kernel: [ 0.146890] ACPI: Using PIC for interrupt routing
Feb 10 22:50:59 italy kernel: [ 0.155718] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 10 22:50:59 italy kernel: [ 0.156864] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
Feb 10 22:50:59 italy kernel: [ 0.156922] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
Feb 10 22:50:59 italy kernel: [ 0.157241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 10 22:50:59 italy kernel: [ 0.201419] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 10 22:50:59 italy kernel: [ 0.202182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 10 22:50:59 italy kernel: [ 0.202941] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 10 22:50:59 italy kernel: [ 0.203698] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 10 22:50:59 italy kernel: [ 0.204454] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 10 22:50:59 italy kernel: [ 0.204581] pnp: PnP ACPI init
Feb 10 22:50:59 italy kernel: [ 0.204643] ACPI: bus type pnp registered
Feb 10 22:50:59 italy kernel: [ 0.211408] pnp: PnP ACPI: found 13 devices
Feb 10 22:50:59 italy kernel: [ 0.211465] ACPI: ACPI bus type pnp unregistered
Feb 10 22:50:59 italy kernel: [ 0.211518] PnPBIOS: Disabled by ACPI PNP
Feb 10 22:50:59 italy kernel: [ 0.212261] PCI: Using ACPI for IRQ routing
Feb 10 22:50:59 italy kernel: [ 0.212771] ACPI: RTC can wake from S4
Feb 10 22:50:59 italy kernel: [ 0.212882] system 00:00: iomem range 0xcd000-0xcffff has been reserved
Feb 10 22:50:59 italy kernel: [ 0.212938] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.212993] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.213047] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.213102] system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.213164] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.213225] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.213279] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
Feb 10 22:50:59 italy kernel: [ 0.213340] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Feb 10 22:50:59 italy kernel: [ 0.213395] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
Feb 10 22:50:59 italy kernel: [ 0.213461] system 00:02: ioport range 0x4000-0x407f has been reserved
Feb 10 22:50:59 italy kernel: [ 0.213515] system 00:02: ioport range 0x5000-0x500f has been reserved
Feb 10 22:50:59 italy kernel: [ 0.213590] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Feb 10 22:50:59 italy kernel: [ 0.213643] system 00:03: ioport range 0x800-0x805 has been reserved
Feb 10 22:50:59 italy kernel: [ 0.213696] system 00:03: ioport range 0x290-0x297 has been reserved
Feb 10 22:50:59 italy kernel: [ 0.244722] PCI: Bridge: 0000:00:01.0
Feb 10 22:50:59 italy kernel: [ 0.244771] IO window: c000-cfff
Feb 10 22:50:59 italy kernel: [ 0.244820] MEM window: 0xe8000000-0xe9ffffff
Feb 10 22:50:59 italy kernel: [ 0.244870] PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
Feb 10 22:50:59 italy kernel: [ 0.244944] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 10 22:50:59 italy kernel: [ 0.244991] NET: Registered protocol family 2
Feb 10 22:50:59 italy kernel: [ 0.245242] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 10 22:50:59 italy kernel: [ 0.246088] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 10 22:50:59 italy kernel: [ 0.251038] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 10 22:50:59 italy kernel: [ 0.253620] TCP: Hash tables configured (established 131072 bind 65536)
Feb 10 22:50:59 italy kernel: [ 0.253679] TCP reno registered
Feb 10 22:50:59 italy kernel: [ 0.254018] NET: Registered protocol family 1
Feb 10 22:50:59 italy kernel: [ 0.254353] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
Feb 10 22:50:59 italy kernel: [ 0.830175] it is
Feb 10 22:50:59 italy kernel: [ 1.517166] Freeing initrd memory: 7199k freed
Feb 10 22:50:59 italy kernel: [ 1.518813] audit: initializing netlink socket (disabled)
Feb 10 22:50:59 italy kernel: [ 1.518898] type=2000 audit(1234306193.516:1): initialized
Feb 10 22:50:59 italy kernel: [ 1.519228] Total HugeTLB memory allocated, 0
Feb 10 22:50:59 italy kernel: [ 1.519445] VFS: Disk quotas dquot_6.5.1
Feb 10 22:50:59 italy kernel: [ 1.519557] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 10 22:50:59 italy kernel: [ 1.519687] msgmni has been set to 1515
Feb 10 22:50:59 italy kernel: [ 1.519970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 10 22:50:59 italy kernel: [ 1.520074] io scheduler noop registered
Feb 10 22:50:59 italy kernel: [ 1.520122] io scheduler anticipatory registered
Feb 10 22:50:59 italy kernel: [ 1.520169] io scheduler deadline registered
Feb 10 22:50:59 italy kernel: [ 1.520229] io scheduler cfq registered (default)
Feb 10 22:50:59 italy kernel: [ 1.520298] PCI: VIA PCI bridge detected.Disabling DAC.
Feb 10 22:50:59 italy kernel: [ 1.520522] pci 0000:01:00.0: Boot video device
Feb 10 22:50:59 italy kernel: [ 1.521344] isapnp: Scanning for PnP cards...
Feb 10 22:50:59 italy kernel: [ 1.875419] isapnp: No Plug & Play device found
Feb 10 22:50:59 italy kernel: [ 1.882523] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 10 22:50:59 italy kernel: [ 1.882792] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 10 22:50:59 italy kernel: [ 1.883004] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 10 22:50:59 italy kernel: [ 1.883743] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 10 22:50:59 italy kernel: [ 1.884102] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 10 22:50:59 italy kernel: [ 1.887787] brd: module loaded
Feb 10 22:50:59 italy kernel: [ 1.888125] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 10 22:50:59 italy kernel: [ 1.888647] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 10 22:50:59 italy kernel: [ 1.888706] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 10 22:50:59 italy kernel: [ 1.889118] mice: PS/2 mouse device common for all mice
Feb 10 22:50:59 italy kernel: [ 1.889487] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Feb 10 22:50:59 italy kernel: [ 1.889563] rtc0: alarms up to one year, y3k
Feb 10 22:50:59 italy kernel: [ 1.889690] cpuidle: using governor ladder
Feb 10 22:50:59 italy kernel: [ 1.889739] cpuidle: using governor menu
Feb 10 22:50:59 italy kernel: [ 1.889793] No iBFT detected.
Feb 10 22:50:59 italy kernel: [ 1.890886] TCP cubic registered
Feb 10 22:50:59 italy kernel: [ 1.890936] NET: Registered protocol family 17
Feb 10 22:50:59 italy kernel: [ 1.890994] Using IPI No-Shortcut mode
Feb 10 22:50:59 italy kernel: [ 1.891332] registered taskstats version 1
Feb 10 22:50:59 italy kernel: [ 1.891741] rtc_cmos 00:05: setting system clock to 2009-02-10 22:49:54 UTC (1234306194)
Feb 10 22:50:59 italy kernel: [ 1.892450] Freeing unused kernel memory: 244k freed
Feb 10 22:50:59 italy kernel: [ 1.911548] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 10 22:50:59 italy kernel: [ 2.143596] ACPI: PNP0C0B:00 is registered as cooling_device0
Feb 10 22:50:59 italy kernel: [ 2.143674] ACPI: Fan [FAN] (on)
Feb 10 22:50:59 italy kernel: [ 2.157591] ACPI: CPU0 (power states: C1[C1] C2[C2])
Feb 10 22:50:59 italy kernel: [ 2.157849] ACPI: ACPI0007:00 is registered as cooling_device1
Feb 10 22:50:59 italy kernel: [ 2.162006] ACPI: LNXTHERM:01 is registered as thermal_zone0
Feb 10 22:50:59 italy kernel: [ 2.162336] ACPI: Thermal Zone [THRM] (40 C)
Feb 10 22:50:59 italy kernel: [ 3.075010] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 10 22:50:59 italy kernel: [ 3.075112] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Feb 10 22:50:59 italy kernel: [ 3.075175] 8139cp 0000:00:0b.0: Try the "8139too" driver instead.
Feb 10 22:50:59 italy kernel: [ 3.101972] 8139too Fast Ethernet driver 0.9.28
Feb 10 22:50:59 italy kernel: [ 3.102944] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Feb 10 22:50:59 italy kernel: [ 3.102999] PCI: setting IRQ 11 as level-triggered
Feb 10 22:50:59 italy kernel: [ 3.103007] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 3.104058] eth0: RealTek RTL8139 at 0xd400, 00:02:44:14:3f:2c, IRQ 11
Feb 10 22:50:59 italy kernel: [ 3.104112] eth0: Identified 8139 chip type 'RTL-8139B'
Feb 10 22:50:59 italy kernel: [ 3.440227] usbcore: registered new interface driver usbfs
Feb 10 22:50:59 italy kernel: [ 3.440358] usbcore: registered new interface driver hub
Feb 10 22:50:59 italy kernel: [ 3.440492] usbcore: registered new device driver usb
Feb 10 22:50:59 italy kernel: [ 3.459731] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 10 22:50:59 italy kernel: [ 3.460648] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Feb 10 22:50:59 italy kernel: [ 3.460710] PCI: setting IRQ 10 as level-triggered
Feb 10 22:50:59 italy kernel: [ 3.460718] ACPI: PCI Interrupt 0000:00:0c.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 3.460862] ohci_hcd 0000:00:0c.0: OHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.461167] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
Feb 10 22:50:59 italy kernel: [ 3.461256] ohci_hcd 0000:00:0c.0: irq 10, io mem 0xea003000
Feb 10 22:50:59 italy kernel: [ 3.518332] usb usb1: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 3.518461] hub 1-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 3.518529] hub 1-0:1.0: 2 ports detected
Feb 10 22:50:59 italy kernel: [ 3.620420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Feb 10 22:50:59 italy kernel: [ 3.620487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 3.620547] usb usb1: Product: OHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.620595] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 10 22:50:59 italy kernel: [ 3.620645] usb usb1: SerialNumber: 0000:00:0c.0
Feb 10 22:50:59 italy kernel: [ 3.621579] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Feb 10 22:50:59 italy kernel: [ 3.621633] ACPI: PCI Interrupt 0000:00:0c.1[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 3.621779] ohci_hcd 0000:00:0c.1: OHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.621890] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
Feb 10 22:50:59 italy kernel: [ 3.621980] ohci_hcd 0000:00:0c.1: irq 11, io mem 0xea004000
Feb 10 22:50:59 italy kernel: [ 3.678346] usb usb2: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 3.678473] hub 2-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 3.678544] hub 2-0:1.0: 2 ports detected
Feb 10 22:50:59 italy kernel: [ 3.745261] modprobe[631]: segfault at 19 ip b7e5b0b3 sp bf84b9e4 error 4 in libc.so.6[b7df0000+138000]
Feb 10 22:50:59 italy kernel: [ 3.780363] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Feb 10 22:50:59 italy kernel: [ 3.780429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 3.780489] usb usb2: Product: OHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.780538] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 10 22:50:59 italy kernel: [ 3.780589] usb usb2: SerialNumber: 0000:00:0c.1
Feb 10 22:50:59 italy kernel: [ 3.780695] ACPI: PCI Interrupt 0000:00:0c.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 3.780845] ohci_hcd 0000:00:0c.2: OHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.780947] ohci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3
Feb 10 22:50:59 italy kernel: [ 3.781034] ohci_hcd 0000:00:0c.2: irq 11, io mem 0xea005000
Feb 10 22:50:59 italy kernel: [ 3.838278] usb usb3: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 3.838407] hub 3-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 3.838476] hub 3-0:1.0: 2 ports detected
Feb 10 22:50:59 italy kernel: [ 3.912341] USB Universal Host Controller Interface driver v3.0
Feb 10 22:50:59 italy kernel: [ 3.924105] usb 1-1: new full speed USB device using ohci_hcd and address 2
Feb 10 22:50:59 italy kernel: [ 3.940352] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 10 22:50:59 italy kernel: [ 3.940418] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 3.940478] usb usb3: Product: OHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.940526] usb usb3: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 10 22:50:59 italy kernel: [ 3.940576] usb usb3: SerialNumber: 0000:00:0c.2
Feb 10 22:50:59 italy kernel: [ 3.943578] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Feb 10 22:50:59 italy kernel: [ 3.943645] ACPI: PCI Interrupt 0000:00:0c.3[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 3.943795] ehci_hcd 0000:00:0c.3: EHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 3.943947] ehci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 4
Feb 10 22:50:59 italy kernel: [ 3.968145] ehci_hcd 0000:00:0c.3: debug port 1
Feb 10 22:50:59 italy kernel: [ 3.968231] ehci_hcd 0000:00:0c.3: irq 10, io mem 0xea006000
Feb 10 22:50:59 italy kernel: [ 4.040569] Uniform Multi-Platform E-IDE driver
Feb 10 22:50:59 italy kernel: [ 4.040634] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 10 22:50:59 italy kernel: [ 4.116117] ehci_hcd 0000:00:0c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 10 22:50:59 italy kernel: [ 4.116382] usb usb4: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 4.116505] hub 4-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 4.116572] hub 4-0:1.0: 6 ports detected
Feb 10 22:50:59 italy kernel: [ 4.220362] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Feb 10 22:50:59 italy kernel: [ 4.220429] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 4.220489] usb usb4: Product: EHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.220537] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 10 22:50:59 italy kernel: [ 4.220587] usb usb4: SerialNumber: 0000:00:0c.3
Feb 10 22:50:59 italy kernel: [ 4.220734] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 4.220874] uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.220981] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
Feb 10 22:50:59 italy kernel: [ 4.221078] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d800
Feb 10 22:50:59 italy kernel: [ 4.221316] usb usb5: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 4.221429] hub 5-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 4.221495] hub 5-0:1.0: 2 ports detected
Feb 10 22:50:59 italy kernel: [ 4.324369] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 10 22:50:59 italy kernel: [ 4.324435] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 4.324495] usb usb5: Product: UHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.324544] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 10 22:50:59 italy kernel: [ 4.324594] usb usb5: SerialNumber: 0000:00:10.0
Feb 10 22:50:59 italy kernel: [ 4.324754] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 4.324894] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.324998] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
Feb 10 22:50:59 italy kernel: [ 4.325093] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000dc00
Feb 10 22:50:59 italy kernel: [ 4.325349] usb usb6: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 4.325463] hub 6-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 4.325526] hub 6-0:1.0: 2 ports detected
Feb 10 22:50:59 italy kernel: [ 4.428371] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 10 22:50:59 italy kernel: [ 4.428438] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 4.428498] usb usb6: Product: UHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.428546] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 10 22:50:59 italy kernel: [ 4.428596] usb usb6: SerialNumber: 0000:00:10.1
Feb 10 22:50:59 italy kernel: [ 4.428758] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 4.428898] uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.429005] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
Feb 10 22:50:59 italy kernel: [ 4.429101] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
Feb 10 22:50:59 italy kernel: [ 4.429350] usb usb7: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 4.429466] hub 7-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 4.429530] hub 7-0:1.0: 2 ports detected
Feb 10 22:50:59 italy kernel: [ 4.512089] usb 1-1: device not accepting address 2, error -62
Feb 10 22:50:59 italy kernel: [ 4.532361] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 10 22:50:59 italy kernel: [ 4.532428] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 4.532488] usb usb7: Product: UHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.532536] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 10 22:50:59 italy kernel: [ 4.532586] usb usb7: SerialNumber: 0000:00:10.2
Feb 10 22:50:59 italy kernel: [ 4.532732] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 4.532884] ehci_hcd 0000:00:10.3: EHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.532989] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
Feb 10 22:50:59 italy kernel: [ 4.533130] ehci_hcd 0000:00:10.3: irq 11, io mem 0xea007000
Feb 10 22:50:59 italy kernel: [ 4.568100] hub 1-0:1.0: unable to enumerate USB device on port 1
Feb 10 22:50:59 italy kernel: [ 4.572022] Marking TSC unstable due to: TSC halts in idle.
Feb 10 22:50:59 italy kernel: [ 4.583815] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 10 22:50:59 italy kernel: [ 4.584068] usb usb8: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 4.584074] hub 8-0:1.0: USB hub found
Feb 10 22:50:59 italy kernel: [ 4.584074] hub 8-0:1.0: 6 ports detected
Feb 10 22:50:59 italy kernel: [ 4.684582] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Feb 10 22:50:59 italy kernel: [ 4.684648] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 10 22:50:59 italy kernel: [ 4.684708] usb usb8: Product: EHCI Host Controller
Feb 10 22:50:59 italy kernel: [ 4.684757] usb usb8: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 10 22:50:59 italy kernel: [ 4.684806] usb usb8: SerialNumber: 0000:00:10.3
Feb 10 22:50:59 italy kernel: [ 4.690618] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
Feb 10 22:50:59 italy kernel: [ 4.690734] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 4.690861] VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 10
Feb 10 22:50:59 italy kernel: [ 4.690942] VP_IDE: not 100% native mode: will probe irqs later
Feb 10 22:50:59 italy kernel: [ 4.691028] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Feb 10 22:50:59 italy kernel: [ 4.691102] ide0: BM-DMA at 0xe400-0xe407
Feb 10 22:50:59 italy kernel: [ 4.691160] ide1: BM-DMA at 0xe408-0xe40f
Feb 10 22:50:59 italy kernel: [ 4.691211] Probing IDE interface ide0...
Feb 10 22:50:59 italy kernel: [ 5.064095] usb 4-1: new high speed USB device using ehci_hcd and address 2
Feb 10 22:50:59 italy kernel: [ 5.104156] hda: Maxtor 6B200P0, ATA DISK drive
Feb 10 22:50:59 italy kernel: [ 5.120244] hub 4-0:1.0: unable to enumerate USB device on port 1
Feb 10 22:50:59 italy kernel: [ 5.372048] usb 4-5: new high speed USB device using ehci_hcd and address 3
Feb 10 22:50:59 italy kernel: [ 5.506700] usb 4-5: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 5.508089] usb 4-5: New USB device found, idVendor=059f, idProduct=0951
Feb 10 22:50:59 italy kernel: [ 5.508168] usb 4-5: New USB device strings: Mfr=10, Product=11, SerialNumber=5
Feb 10 22:50:59 italy kernel: [ 5.508229] usb 4-5: Product: LaCie Hard Drive USB
Feb 10 22:50:59 italy kernel: [ 5.508277] usb 4-5: Manufacturer: LaCie SA
Feb 10 22:50:59 italy kernel: [ 5.508958] usb 4-5: SerialNumber: 031D703971FF
Feb 10 22:50:59 italy kernel: [ 5.583164] SCSI subsystem initialized
Feb 10 22:50:59 italy kernel: [ 5.592250] Initializing USB Mass Storage driver...
Feb 10 22:50:59 italy kernel: [ 5.776136] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 10 22:50:59 italy kernel: [ 5.777637] hda: UDMA/133 mode selected
Feb 10 22:50:59 italy kernel: [ 5.779191] Probing IDE interface ide1...
Feb 10 22:50:59 italy kernel: [ 6.284296] scsi0 : SCSI emulation for USB Mass Storage devices
Feb 10 22:50:59 italy kernel: [ 6.284952] usb-storage: device found at 3
Feb 10 22:50:59 italy kernel: [ 6.284959] usb-storage: waiting for device to settle before scanning
Feb 10 22:50:59 italy kernel: [ 6.412108] usbcore: registered new interface driver usb-storage
Feb 10 22:50:59 italy kernel: [ 6.412167] USB Mass Storage support registered.
Feb 10 22:50:59 italy kernel: [ 6.716047] usb 1-1: new full speed USB device using ohci_hcd and address 4
Feb 10 22:50:59 italy kernel: [ 6.924146] hdd: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive
Feb 10 22:50:59 italy kernel: [ 6.941305] usb 1-1: not running at top speed; connect to a high speed hub
Feb 10 22:50:59 italy kernel: [ 6.980146] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 10 22:50:59 italy kernel: [ 6.980432] hdd: UDMA/66 mode selected
Feb 10 22:50:59 italy kernel: [ 6.980774] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 10 22:50:59 italy kernel: [ 7.003270] ide1 at 0x170-0x177,0x376 on irq 15
Feb 10 22:50:59 italy kernel: [ 7.009072] No dock devices found.
Feb 10 22:50:59 italy kernel: [ 7.032144] libata version 3.00 loaded.
Feb 10 22:50:59 italy kernel: [ 7.058652] usb 1-1: configuration #1 chosen from 1 choice
Feb 10 22:50:59 italy kernel: [ 7.062755] scsi1 : SCSI emulation for USB Mass Storage devices
Feb 10 22:50:59 italy kernel: [ 7.063186] usb 1-1: New USB device found, idVendor=07ab, idProduct=fcfe
Feb 10 22:50:59 italy kernel: [ 7.063242] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 10 22:50:59 italy kernel: [ 7.063296] usb 1-1: Product: Freecom Hard Drive
Feb 10 22:50:59 italy kernel: [ 7.063344] usb 1-1: Manufacturer: Freecom
Feb 10 22:50:59 italy kernel: [ 7.063389] usb 1-1: SerialNumber: 01860D8900920
Feb 10 22:50:59 italy kernel: [ 7.063485] usb-storage: device found at 4
Feb 10 22:50:59 italy kernel: [ 7.063490] usb-storage: waiting for device to settle before scanning
Feb 10 22:50:59 italy kernel: [ 7.120644] hda: max request size: 512KiB
Feb 10 22:50:59 italy kernel: [ 7.126099] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63
Feb 10 22:50:59 italy kernel: [ 7.130662] hda: cache flushes supported
Feb 10 22:50:59 italy kernel: [ 7.130819] hda: hda1 hda2 < hda5 >
Feb 10 22:50:59 italy kernel: [ 7.151410] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Feb 10 22:50:59 italy kernel: [ 7.151654] Uniform CD-ROM driver Revision: 3.20
Feb 10 22:50:59 italy kernel: [ 7.460100] device-mapper: uevent: version 1.0.3
Feb 10 22:50:59 italy kernel: [ 7.462909] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Feb 10 22:50:59 italy kernel: [ 11.284977] usb-storage: device scan complete
Feb 10 22:50:59 italy kernel: [ 11.354670] scsi 0:0:0:0: Direct-Access SAMSUNG HD500LJ PQ: 0 ANSI: 2 CCS
Feb 10 22:50:59 italy kernel: [ 11.394518] Driver 'sd' needs updating - please use bus_type methods
Feb 10 22:50:59 italy kernel: [ 11.396179] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 10 22:50:59 italy kernel: [ 11.397454] sd 0:0:0:0: [sda] Write Protect is off
Feb 10 22:50:59 italy kernel: [ 11.397467] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 10 22:50:59 italy kernel: [ 11.397474] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 10 22:50:59 italy kernel: [ 11.399707] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 10 22:50:59 italy kernel: [ 11.401075] sd 0:0:0:0: [sda] Write Protect is off
Feb 10 22:50:59 italy kernel: [ 11.401088] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 10 22:50:59 italy kernel: [ 11.401094] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 10 22:50:59 italy kernel: [ 11.401104] sda: sda1
Feb 10 22:50:59 italy kernel: [ 11.420796] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 10 22:50:59 italy kernel: [ 11.616055] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 10 22:50:59 italy kernel: [ 11.952054] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 10 22:50:59 italy kernel: [ 12.063881] usb-storage: device scan complete
Feb 10 22:50:59 italy kernel: [ 12.099676] scsi 1:0:0:0: Direct-Access SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 0
Feb 10 22:50:59 italy kernel: [ 12.110883] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 10 22:50:59 italy kernel: [ 12.124872] sd 1:0:0:0: [sdb] Write Protect is off
Feb 10 22:50:59 italy kernel: [ 12.124884] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 10 22:50:59 italy kernel: [ 12.124890] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 10 22:50:59 italy kernel: [ 12.135834] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 10 22:50:59 italy kernel: [ 12.149707] sd 1:0:0:0: [sdb] Write Protect is off
Feb 10 22:50:59 italy kernel: [ 12.149707] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 10 22:50:59 italy kernel: [ 12.149707] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 10 22:50:59 italy kernel: [ 12.149707] sdb:<6>PM: Starting manual resume from disk
Feb 10 22:50:59 italy kernel: [ 19.451235] EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 10 22:50:59 italy kernel: [ 19.451304] EXT3-fs: write access will be enabled during recovery.
Feb 10 22:50:59 italy kernel: [ 19.698506] sdb1
Feb 10 22:50:59 italy kernel: [ 19.698934] sd 1:0:0:0: [sdb] Attached SCSI disk
Feb 10 22:50:59 italy kernel: [ 20.650651] kjournald starting. Commit interval 5 seconds
Feb 10 22:50:59 italy kernel: [ 20.650757] EXT3-fs: dm-1: orphan cleanup on readonly fs
Feb 10 22:50:59 italy kernel: [ 20.740546] ext3_orphan_cleanup: deleting unreferenced inode 325007
Feb 10 22:50:59 italy kernel: [ 20.901377] ext3_orphan_cleanup: deleting unreferenced inode 827792
Feb 10 22:50:59 italy kernel: [ 20.921760] ext3_orphan_cleanup: deleting unreferenced inode 421916
Feb 10 22:50:59 italy kernel: [ 20.921815] ext3_orphan_cleanup: deleting unreferenced inode 327786
Feb 10 22:50:59 italy kernel: [ 20.936875] ext3_orphan_cleanup: deleting unreferenced inode 326509
Feb 10 22:50:59 italy kernel: [ 21.010351] ext3_orphan_cleanup: deleting unreferenced inode 326342
Feb 10 22:50:59 italy kernel: [ 21.575729] ext3_orphan_cleanup: deleting unreferenced inode 325864
Feb 10 22:50:59 italy kernel: [ 21.639900] ext3_orphan_cleanup: deleting unreferenced inode 667495
Feb 10 22:50:59 italy kernel: [ 21.778122] ext3_orphan_cleanup: deleting unreferenced inode 600291
Feb 10 22:50:59 italy kernel: [ 21.862170] ext3_orphan_cleanup: deleting unreferenced inode 811547
Feb 10 22:50:59 italy kernel: [ 21.862170] ext3_orphan_cleanup: deleting unreferenced inode 325932
Feb 10 22:50:59 italy kernel: [ 21.913891] ext3_orphan_cleanup: deleting unreferenced inode 324692
Feb 10 22:50:59 italy kernel: [ 21.935409] ext3_orphan_cleanup: deleting unreferenced inode 162928
Feb 10 22:50:59 italy kernel: [ 21.962446] ext3_orphan_cleanup: deleting unreferenced inode 65913
Feb 10 22:50:59 italy kernel: [ 22.006505] ext3_orphan_cleanup: deleting unreferenced inode 827434
Feb 10 22:50:59 italy kernel: [ 22.006505] ext3_orphan_cleanup: deleting unreferenced inode 827433
Feb 10 22:50:59 italy kernel: [ 22.006505] ext3_orphan_cleanup: deleting unreferenced inode 827432
Feb 10 22:50:59 italy kernel: [ 22.006505] ext3_orphan_cleanup: deleting unreferenced inode 827431
Feb 10 22:50:59 italy kernel: [ 22.006505] ext3_orphan_cleanup: deleting unreferenced inode 827430
Feb 10 22:50:59 italy kernel: [ 22.006505] EXT3-fs: dm-1: 19 orphan inodes deleted
Feb 10 22:50:59 italy kernel: [ 22.006505] EXT3-fs: recovery complete.
Feb 10 22:50:59 italy kernel: [ 22.045418] EXT3-fs: mounted filesystem with ordered data mode.
Feb 10 22:50:59 italy kernel: [ 24.564130] udevd version 125 started
Feb 10 22:50:59 italy kernel: [ 25.574620] hda: UDMA/133 mode selected
Feb 10 22:50:59 italy kernel: [ 25.580248] hdd: UDMA/66 mode selected
Feb 10 22:50:59 italy kernel: [ 25.760116] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 10 22:50:59 italy kernel: [ 27.844335] Linux agpgart interface v0.103
Feb 10 22:50:59 italy kernel: [ 27.855730] agpgart: Detected VIA KT266/KY266x/KT333 chipset
Feb 10 22:50:59 italy kernel: [ 27.866605] agpgart: AGP aperture is 128M @ 0xd0000000
Feb 10 22:50:59 italy kernel: [ 27.884599] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 10 22:50:59 italy kernel: [ 27.890061] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 10 22:50:59 italy kernel: [ 28.387759] Linux video capture interface: v2.00
Feb 10 22:50:59 italy kernel: [ 28.585002] bttv: driver version 0.9.17 loaded
Feb 10 22:50:59 italy kernel: [ 28.585064] bttv: using 8 buffers with 2080k (520 pages) each for capture
Feb 10 22:50:59 italy kernel: [ 28.585205] bttv: Bt8xx card found (0).
Feb 10 22:50:59 italy kernel: [ 28.585289] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 28.585424] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xea000000
Feb 10 22:50:59 italy kernel: [ 28.599833] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Feb 10 22:50:59 italy kernel: [ 28.599902] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Feb 10 22:50:59 italy kernel: [ 28.600004] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Feb 10 22:50:59 italy kernel: [ 28.602497] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Feb 10 22:50:59 italy kernel: [ 28.630108] tveeprom 0-0050: Hauppauge model 44801, rev D182, serial# 2772248
Feb 10 22:50:59 italy kernel: [ 28.630165] tveeprom 0-0050: tuner model is LG TAPC H791F (idx 82, type 39)
Feb 10 22:50:59 italy kernel: [ 28.630221] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
Feb 10 22:50:59 italy kernel: [ 28.630273] tveeprom 0-0050: audio processor is None (idx 0)
Feb 10 22:50:59 italy kernel: [ 28.630324] tveeprom 0-0050: has no radio
Feb 10 22:50:59 italy kernel: [ 28.630371] bttv0: Hauppauge eeprom indicates model#44801
Feb 10 22:50:59 italy kernel: [ 28.630421] bttv0: tuner type=39
Feb 10 22:50:59 italy kernel: [ 28.630469] bttv0: i2c: checking for MSP34xx @ 0x80... not found
Feb 10 22:50:59 italy kernel: [ 29.212516] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 10 22:50:59 italy kernel: [ 29.225996] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 10 22:50:59 italy kernel: [ 29.287448] input: Power Button (FF) as /class/input/input1
Feb 10 22:50:59 italy kernel: [ 29.319895] ACPI: Power Button (FF) [PWRF]
Feb 10 22:50:59 italy kernel: [ 29.320144] input: Power Button (CM) as /class/input/input2
Feb 10 22:50:59 italy kernel: [ 29.348576] ACPI: Power Button (CM) [PWRB]
Feb 10 22:50:59 italy kernel: [ 29.348791] input: Sleep Button (CM) as /class/input/input3
Feb 10 22:50:59 italy kernel: [ 29.379545] ACPI: Sleep Button (CM) [SLPB]
Feb 10 22:50:59 italy kernel: [ 29.867618] tuner' 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
Feb 10 22:50:59 italy kernel: [ 30.473113] tuner-simple 0-0061: creating new instance
Feb 10 22:50:59 italy kernel: [ 30.473179] tuner-simple 0-0061: type set to 39 (LG NTSC (newer TAPC series))
Feb 10 22:50:59 italy kernel: [ 30.482362] bttv0: registered device video0
Feb 10 22:50:59 italy kernel: [ 30.482452] bttv0: registered device vbi0
Feb 10 22:50:59 italy kernel: [ 30.482523] bttv0: PLL: 28636363 => 35468950 .. ok
Feb 10 22:50:59 italy kernel: [ 31.314879] input: PC Speaker as /class/input/input4
Feb 10 22:50:59 italy kernel: [ 31.595168] BUG: unable to handle kernel paging request at bb0380cc
Feb 10 22:50:59 italy kernel: [ 31.595299] IP: [<c0163afb>] handle_mm_fault+0x7f/0x690
Feb 10 22:50:59 italy kernel: [ 31.595396] *pde = 00000000
Feb 10 22:50:59 italy kernel: [ 31.595473] Oops: 0000 [#1] SMP
Feb 10 22:50:59 italy kernel: [ 31.595575] Modules linked in: i2c_viapro pcspkr tuner_simple tuner_types snd_seq_oss(+) snd_seq_midi snd_rawmidi tuner snd_seq_midi_event snd_seq tvaudio button snd_timer snd_seq_device snd bttv videodev v4l1_compat firmware_class ir_common compat_ioctl32 soundcore i2c_algo_bit snd_page_alloc v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc sd_mod dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom ide_disk ata_generic libata dock usb_storage scsi_mod via82cxxx ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 10 22:50:59 italy kernel: [ 31.596017]
Feb 10 22:50:59 italy kernel: [ 31.596017] Pid: 1769, comm: vol_id Not tainted (2.6.26-1-686 #1)
Feb 10 22:50:59 italy kernel: [ 31.596017] EIP: 0060:[<c0163afb>] EFLAGS: 00010287 CPU: 0
Feb 10 22:50:59 italy kernel: [ 31.596017] EIP is at handle_mm_fault+0x7f/0x690
Feb 10 22:50:59 italy kernel: [ 31.596017] EAX: bb0380cc EBX: edca6b00 ECX: edca6b00 EDX: cccccccc
Feb 10 22:50:59 italy kernel: [ 31.596017] ESI: ee36b458 EDI: b7e35030 EBP: ee457340 ESP: ee455f6c
Feb 10 22:50:59 italy kernel: [ 31.596017] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 10 22:50:59 italy kernel: [ 31.596017] Process vol_id (pid: 1769, ti=ee454000 task=ee457340 task.ti=ee454000)
Feb 10 22:50:59 italy kernel: [ 31.596017] Stack: edca6b00 ee36b458 b7e35030 ee457340 c0115b4f 00000000 00000004 bb0380cc
Feb 10 22:50:59 italy kernel: [ 31.596017] ee36b420 00000000 c0174d85 00000839 00000000 00000000 b7d97ff4 0854d130
Feb 10 22:50:59 italy kernel: [ 31.596017] c01158b4 bf841934 c02b980a b7d97ff4 b7ec0aa0 b7ef29bc 0854d130 0854d52f
Feb 10 22:50:59 italy kernel: [ 31.596017] Call Trace:
Feb 10 22:50:59 italy kernel: [ 31.596017] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 10 22:50:59 italy kernel: [ 31.596017] [<c0174d85>] sys_llseek+0x60/0x82
Feb 10 22:50:59 italy kernel: [ 31.596017] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 10 22:50:59 italy kernel: [ 31.596017] [<c02b980a>] error_code+0x72/0x78
Feb 10 22:50:59 italy kernel: [ 31.596017] =======================
Feb 10 22:50:59 italy kernel: [ 31.596017] Code: 8b 44 24 14 83 c4 5c 5b 5e 5f 5d e9 44 9e 00 00 8b 44 24 0c 8b 54 24 14 c1 e8 16 c1 e0 02 89 44 24 1c 8b 52 24 01 d0 89 44 24 1c <8b> 00 e8 56 12 fb ff 90 a8 01 75 19 8b 4c 24 0c 8b 54 24 1c 8b
Feb 10 22:50:59 italy kernel: [ 31.596017] EIP: [<c0163afb>] handle_mm_fault+0x7f/0x690 SS:ESP 0068:ee455f6c
Feb 10 22:50:59 italy kernel: [ 31.601873] ---[ end trace b2d924e398047fbb ]---
Feb 10 22:50:59 italy kernel: [ 31.735348] BUG: unable to handle kernel paging request at 63207d49
Feb 10 22:50:59 italy kernel: [ 31.735476] IP: [<c011795c>] huge_pte_alloc+0xe/0x29
Feb 10 22:50:59 italy kernel: [ 31.735569] *pde = 00000000
Feb 10 22:50:59 italy kernel: [ 31.735645] Oops: 0000 [#2] SMP
Feb 10 22:50:59 italy kernel: [ 31.735747] Modules linked in: crc_ccitt i2c_viapro pcspkr tuner_simple tuner_types snd_seq_oss(+) snd_seq_midi snd_rawmidi tuner snd_seq_midi_event snd_seq tvaudio button snd_timer snd_seq_device snd bttv videodev v4l1_compat firmware_class ir_common compat_ioctl32 soundcore i2c_algo_bit snd_page_alloc v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc sd_mod dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom ide_disk ata_generic libata dock usb_storage scsi_mod via82cxxx ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 10 22:50:59 italy kernel: [ 31.736027]
Feb 10 22:50:59 italy kernel: [ 31.736027] Pid: 1778, comm: udevd Tainted: G D (2.6.26-1-686 #1)
Feb 10 22:50:59 italy kernel: [ 31.736027] EIP: 0060:[<c011795c>] EFLAGS: 00010202 CPU: 0
Feb 10 22:50:59 italy kernel: [ 31.736027] EIP is at huge_pte_alloc+0xe/0x29
Feb 10 22:50:59 italy kernel: [ 31.736027] EAX: eebcd700 EBX: 00000000 ECX: ee2a8d4c EDX: 63207d49
Feb 10 22:50:59 italy kernel: [ 31.736027] ESI: eebcd7b8 EDI: b7f09bb0 EBP: ef710300 ESP: ee365f74
Feb 10 22:50:59 italy kernel: [ 31.736027] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 10 22:50:59 italy kernel: [ 31.736027] Process udevd (pid: 1778, ti=ee364000 task=ef710300 task.ti=ee364000)
Feb 10 22:50:59 italy kernel: [ 31.736027] Stack: ee2a8d4c c016d941 c0115b4f ee2a8d4c 00000004 ee365fb8 eebcd780 00000000
Feb 10 22:50:59 italy kernel: [ 31.736027] 499204b0 13915d63 499204b0 13915d63 bfeec6ac bfeec4ac c01158b4 bfeec8b8
Feb 10 22:50:59 italy kernel: [ 31.736027] c02b980a bfeec6ac bfeec8f7 00000000 bfeec4ac bfeec8dc bfeec8b8 0000001e
Feb 10 22:50:59 italy kernel: [ 31.736027] Call Trace:
Feb 10 22:50:59 italy kernel: [ 31.736027] [<c016d941>] hugetlb_fault+0x1d/0x2c7
Feb 10 22:50:59 italy kernel: [ 31.736027] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 10 22:50:59 italy kernel: [ 31.736027] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 10 22:50:59 italy kernel: [ 31.736027] [<c02b980a>] error_code+0x72/0x78
Feb 10 22:50:59 italy kernel: [ 31.736027] =======================
Feb 10 22:50:59 italy kernel: [ 31.736027] Code: ff ff ff 89 46 20 59 5b eb 09 89 df eb 05 bf ea ff ff ff 83 c4 18 89 f8 5b 5e 5f 5d c3 c1 ea 16 53 31 db c1 e2 02 03 50 24 74 17 <83> 3a 00 89 d3 74 10 8b 02 e8 f0 d3 ff ff 90 84 c0 78 04 0f 0b
Feb 10 22:50:59 italy kernel: [ 31.736027] EIP: [<c011795c>] huge_pte_alloc+0xe/0x29 SS:ESP 0068:ee365f74
Feb 10 22:50:59 italy kernel: [ 31.742788] ---[ end trace b2d924e398047fbb ]---
Feb 10 22:50:59 italy kernel: [ 31.898191] NET: Registered protocol family 23
Feb 10 22:50:59 italy kernel: [ 32.202349] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
Feb 10 22:50:59 italy kernel: [ 32.230902] parport_pc 00:0a: reported by Plug and Play ACPI
Feb 10 22:50:59 italy kernel: [ 32.231031] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Feb 10 22:50:59 italy kernel: [ 32.620920] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 33.713011] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 10 22:50:59 italy kernel: [ 33.713861] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
Feb 10 22:50:59 italy kernel: [ 34.840277] hda: UDMA/133 mode selected
Feb 10 22:50:59 italy kernel: [ 34.895178] hdd: UDMA/66 mode selected
Feb 10 22:50:59 italy kernel: [ 35.613848] EXT3 FS on dm-1, internal journal
Feb 10 22:50:59 italy kernel: [ 36.026991] loop: module loaded
Feb 10 22:50:59 italy kernel: [ 36.131008] [drm] Initialized drm 1.1.0 20060810
Feb 10 22:50:59 italy kernel: [ 36.174372] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 10 22:50:59 italy kernel: [ 36.174673] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Feb 10 22:50:59 italy kernel: [ 37.376052] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 10 22:50:59 italy kernel: [ 62.999567] kjournald starting. Commit interval 5 seconds
Feb 10 22:50:59 italy kernel: [ 63.009243] EXT3 FS on hda1, internal journal
Feb 10 22:50:59 italy kernel: [ 63.009243] EXT3-fs: mounted filesystem with ordered data mode.
Feb 10 22:50:59 italy kernel: [ 63.058895] kjournald starting. Commit interval 5 seconds
Feb 10 22:50:59 italy kernel: [ 63.071936] EXT3 FS on dm-3, internal journal
Feb 10 22:50:59 italy kernel: [ 63.072084] EXT3-fs: mounted filesystem with ordered data mode.
Feb 10 22:50:59 italy kernel: [ 63.111756] kjournald starting. Commit interval 5 seconds
Feb 10 22:50:59 italy kernel: [ 63.111838] EXT3-fs: mounted filesystem with ordered data mode.
Feb 10 22:50:59 italy kernel: [ 63.174664] Adding 2330616k swap on /dev/mapper/italy-swap_1. Priority:-1 extents:1 across:2330616k
Feb 10 22:50:59 italy kernel: [ 65.726895] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Feb 12 00:20:00 italy kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Feb 12 00:20:00 italy kernel: [ 0.000000] Initializing cgroup subsys cpuset
Feb 12 00:20:00 italy kernel: [ 0.000000] Initializing cgroup subsys cpu
Feb 12 00:20:00 italy kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
Feb 12 00:20:00 italy kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb 12 00:20:00 italy kernel: [ 0.000000] 0MB HIGHMEM available.
Feb 12 00:20:00 italy kernel: [ 0.000000] 767MB LOWMEM available.
Feb 12 00:20:00 italy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Feb 12 00:20:00 italy kernel: [ 0.000000] Zone PFN ranges:
Feb 12 00:20:00 italy kernel: [ 0.000000] DMA 0 -> 4096
Feb 12 00:20:00 italy kernel: [ 0.000000] Normal 4096 -> 196592
Feb 12 00:20:00 italy kernel: [ 0.000000] HighMem 196592 -> 196592
Feb 12 00:20:00 italy kernel: [ 0.000000] Movable zone start PFN for each node
Feb 12 00:20:00 italy kernel: [ 0.000000] early_node_map[1] active PFN ranges
Feb 12 00:20:00 italy kernel: [ 0.000000] 0: 0 -> 196592
Feb 12 00:20:00 italy kernel: [ 0.000000] On node 0 totalpages: 196592
Feb 12 00:20:00 italy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Feb 12 00:20:00 italy kernel: [ 0.000000] DMA zone: 0 pages reserved
Feb 12 00:20:00 italy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Feb 12 00:20:00 italy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Feb 12 00:20:00 italy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Feb 12 00:20:00 italy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Feb 12 00:20:00 italy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Feb 12 00:20:00 italy kernel: [ 0.000000] DMI 2.2 present.
Feb 12 00:20:00 italy kernel: [ 0.000000] ACPI: RSDP 000F62E0, 0014 (r0 VIA694)
Feb 12 00:20:00 italy kernel: [ 0.000000] ACPI: RSDT 2FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 12 00:20:00 italy kernel: [ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 12 00:20:00 italy kernel: [ 0.000000] ACPI: DSDT 2FFF30C0, 3316 (r1 VIA694 AWRDACPI 1000 MSFT 100000E)
Feb 12 00:20:00 italy kernel: [ 0.000000] ACPI: FACS 2FFF0000, 0040
Feb 12 00:20:00 italy kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Feb 12 00:20:00 italy kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
Feb 12 00:20:00 italy kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 12 00:20:00 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Feb 12 00:20:00 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Feb 12 00:20:00 italy kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
Feb 12 00:20:00 italy kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Feb 12 00:20:00 italy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Feb 12 00:20:00 italy kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056
Feb 12 00:20:00 italy kernel: [ 0.000000] Kernel command line: root=/dev/mapper/italy-root ro
Feb 12 00:20:00 italy kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Feb 12 00:20:00 italy kernel: [ 0.000000] mapped APIC to ffffb000 (0160f000)
Feb 12 00:20:00 italy kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Feb 12 00:20:00 italy kernel: [ 0.000000] Initializing CPU#0
Feb 12 00:20:00 italy kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 12 00:20:00 italy kernel: [ 0.000000] Detected 930.687 MHz processor.
Feb 12 00:20:00 italy kernel: [ 0.004000] Console: colour VGA+ 80x25
Feb 12 00:20:00 italy kernel: [ 0.004000] console [tty0] enabled
Feb 12 00:20:00 italy kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 12 00:20:00 italy kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 12 00:20:00 italy kernel: [ 0.004000] Memory: 768324k/786368k available (1769k kernel code, 17452k reserved, 752k data, 244k init, 0k highmem)
Feb 12 00:20:00 italy kernel: [ 0.004000] virtual kernel memory layout:
Feb 12 00:20:00 italy kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Feb 12 00:20:00 italy kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 12 00:20:00 italy kernel: [ 0.004000] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
Feb 12 00:20:00 italy kernel: [ 0.004000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
Feb 12 00:20:00 italy kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Feb 12 00:20:00 italy kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Feb 12 00:20:00 italy kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Feb 12 00:20:00 italy kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 12 00:20:00 italy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Feb 12 00:20:00 italy kernel: [ 0.084276] Calibrating delay using timer specific routine.. 1863.87 BogoMIPS (lpj=3727757)
Feb 12 00:20:00 italy kernel: [ 0.084444] Security Framework initialized
Feb 12 00:20:00 italy kernel: [ 0.084501] SELinux: Disabled at boot.
Feb 12 00:20:00 italy kernel: [ 0.084551] Capability LSM initialized
Feb 12 00:20:00 italy kernel: [ 0.084627] Mount-cache hash table entries: 512
Feb 12 00:20:00 italy kernel: [ 0.084979] Initializing cgroup subsys ns
Feb 12 00:20:00 italy kernel: [ 0.085031] Initializing cgroup subsys cpuacct
Feb 12 00:20:00 italy kernel: [ 0.085081] Initializing cgroup subsys devices
Feb 12 00:20:00 italy kernel: [ 0.085163] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 12 00:20:00 italy kernel: [ 0.085218] CPU: L2 Cache: 256K (64 bytes/line)
Feb 12 00:20:00 italy kernel: [ 0.085269] Intel machine check architecture supported.
Feb 12 00:20:00 italy kernel: [ 0.085320] Intel machine check reporting enabled on CPU#0.
Feb 12 00:20:00 italy kernel: [ 0.085393] Checking 'hlt' instruction... OK.
Feb 12 00:20:00 italy kernel: [ 0.100367] SMP alternatives: switching to UP code
Feb 12 00:20:00 italy kernel: [ 0.114487] Freeing SMP alternatives: 16k freed
Feb 12 00:20:00 italy kernel: [ 0.114545] ACPI: Core revision 20080321
Feb 12 00:20:00 italy kernel: [ 0.123955] ACPI: setting ELCR to 0200 (from 0e00)
Feb 12 00:20:00 italy kernel: [ 0.128008] weird, boot CPU (#0) not listedby the BIOS.
Feb 12 00:20:00 italy kernel: [ 0.128008] SMP motherboard not detected.
Feb 12 00:20:00 italy kernel: [ 0.128008] Local APIC not detected. Using dummy APIC emulation.
Feb 12 00:20:00 italy kernel: [ 0.128008] SMP disabled
Feb 12 00:20:00 italy kernel: [ 0.128008] Brought up 1 CPUs
Feb 12 00:20:00 italy kernel: [ 0.128008] Total of 1 processors activated (1863.87 BogoMIPS).
Feb 12 00:20:00 italy kernel: [ 0.128008] CPU0 attaching sched-domain:
Feb 12 00:20:00 italy kernel: [ 0.128008] domain 0: span 0
Feb 12 00:20:00 italy kernel: [ 0.128008] groups: 0
Feb 12 00:20:00 italy kernel: [ 0.128008] net_namespace: 660 bytes
Feb 12 00:20:00 italy kernel: [ 0.128008] Booting paravirtualized kernel on bare hardware
Feb 12 00:20:00 italy kernel: [ 0.128008] NET: Registered protocol family 16
Feb 12 00:20:00 italy kernel: [ 0.128008] ACPI: bus type pci registered
Feb 12 00:20:00 italy kernel: [ 0.130376] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
Feb 12 00:20:00 italy kernel: [ 0.130430] PCI: Using configuration type 1 for base access
Feb 12 00:20:00 italy kernel: [ 0.130501] Setting up standard PCI resources
Feb 12 00:20:00 italy kernel: [ 0.136668] ACPI: EC: Look up EC in DSDT
Feb 12 00:20:00 italy kernel: [ 0.144972] ACPI: Interpreter enabled
Feb 12 00:20:00 italy kernel: [ 0.145030] ACPI: (supports S0 S1 S4 S5)
Feb 12 00:20:00 italy kernel: [ 0.145217] ACPI: Using PIC for interrupt routing
Feb 12 00:20:00 italy kernel: [ 0.154063] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 12 00:20:00 italy kernel: [ 0.155186] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
Feb 12 00:20:00 italy kernel: [ 0.155243] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
Feb 12 00:20:00 italy kernel: [ 0.155562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 12 00:20:00 italy kernel: [ 0.199766] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 12 00:20:00 italy kernel: [ 0.200548] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 12 00:20:00 italy kernel: [ 0.201307] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 12 00:20:00 italy kernel: [ 0.202062] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 12 00:20:00 italy kernel: [ 0.202800] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 12 00:20:00 italy kernel: [ 0.202929] pnp: PnP ACPI init
Feb 12 00:20:00 italy kernel: [ 0.202990] ACPI: bus type pnp registered
Feb 12 00:20:00 italy kernel: [ 0.209754] pnp: PnP ACPI: found 13 devices
Feb 12 00:20:00 italy kernel: [ 0.209811] ACPI: ACPI bus type pnp unregistered
Feb 12 00:20:00 italy kernel: [ 0.209864] PnPBIOS: Disabled by ACPI PNP
Feb 12 00:20:00 italy kernel: [ 0.210581] PCI: Using ACPI for IRQ routing
Feb 12 00:20:00 italy kernel: [ 0.211103] ACPI: RTC can wake from S4
Feb 12 00:20:00 italy kernel: [ 0.211214] system 00:00: iomem range 0xcd000-0xcffff has been reserved
Feb 12 00:20:00 italy kernel: [ 0.211270] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211325] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211380] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211434] system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211496] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211557] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211611] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
Feb 12 00:20:00 italy kernel: [ 0.211672] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Feb 12 00:20:00 italy kernel: [ 0.211727] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
Feb 12 00:20:00 italy kernel: [ 0.211793] system 00:02: ioport range 0x4000-0x407f has been reserved
Feb 12 00:20:00 italy kernel: [ 0.211847] system 00:02: ioport range 0x5000-0x500f has been reserved
Feb 12 00:20:00 italy kernel: [ 0.211921] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Feb 12 00:20:00 italy kernel: [ 0.211975] system 00:03: ioport range 0x800-0x805 has been reserved
Feb 12 00:20:00 italy kernel: [ 0.212053] system 00:03: ioport range 0x290-0x297 has been reserved
Feb 12 00:20:00 italy kernel: [ 0.243079] PCI: Bridge: 0000:00:01.0
Feb 12 00:20:00 italy kernel: [ 0.243128] IO window: c000-cfff
Feb 12 00:20:00 italy kernel: [ 0.243177] MEM window: 0xe8000000-0xe9ffffff
Feb 12 00:20:00 italy kernel: [ 0.243227] PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
Feb 12 00:20:00 italy kernel: [ 0.243300] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 12 00:20:00 italy kernel: [ 0.243348] NET: Registered protocol family 2
Feb 12 00:20:00 italy kernel: [ 0.243598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 12 00:20:00 italy kernel: [ 0.244463] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 12 00:20:00 italy kernel: [ 0.249402] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 12 00:20:00 italy kernel: [ 0.251946] TCP: Hash tables configured (established 131072 bind 65536)
Feb 12 00:20:00 italy kernel: [ 0.252029] TCP reno registered
Feb 12 00:20:00 italy kernel: [ 0.252359] NET: Registered protocol family 1
Feb 12 00:20:00 italy kernel: [ 0.252697] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
Feb 12 00:20:00 italy kernel: [ 0.828748] it is
Feb 12 00:20:00 italy kernel: [ 1.515800] Freeing initrd memory: 7199k freed
Feb 12 00:20:00 italy kernel: [ 1.517480] audit: initializing netlink socket (disabled)
Feb 12 00:20:00 italy kernel: [ 1.517565] type=2000 audit(1234397951.516:1): initialized
Feb 12 00:20:00 italy kernel: [ 1.517892] Total HugeTLB memory allocated, 0
Feb 12 00:20:00 italy kernel: [ 1.518109] VFS: Disk quotas dquot_6.5.1
Feb 12 00:20:00 italy kernel: [ 1.518221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 12 00:20:00 italy kernel: [ 1.518351] msgmni has been set to 1515
Feb 12 00:20:00 italy kernel: [ 1.518632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 12 00:20:00 italy kernel: [ 1.518697] io scheduler noop registered
Feb 12 00:20:00 italy kernel: [ 1.518744] io scheduler anticipatory registered
Feb 12 00:20:00 italy kernel: [ 1.518792] io scheduler deadline registered
Feb 12 00:20:00 italy kernel: [ 1.518851] io scheduler cfq registered (default)
Feb 12 00:20:00 italy kernel: [ 1.518919] PCI: VIA PCI bridge detected.Disabling DAC.
Feb 12 00:20:00 italy kernel: [ 1.519145] pci 0000:01:00.0: Boot video device
Feb 12 00:20:00 italy kernel: [ 1.519953] isapnp: Scanning for PnP cards...
Feb 12 00:20:00 italy kernel: [ 1.874050] isapnp: No Plug & Play device found
Feb 12 00:20:00 italy kernel: [ 1.881358] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 12 00:20:00 italy kernel: [ 1.881629] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 12 00:20:00 italy kernel: [ 1.881857] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 12 00:20:00 italy kernel: [ 1.882586] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 12 00:20:00 italy kernel: [ 1.882906] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 12 00:20:00 italy kernel: [ 1.886620] brd: module loaded
Feb 12 00:20:00 italy kernel: [ 1.886905] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 12 00:20:00 italy kernel: [ 1.887427] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 12 00:20:00 italy kernel: [ 1.887485] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 12 00:20:00 italy kernel: [ 1.887884] mice: PS/2 mouse device common for all mice
Feb 12 00:20:00 italy kernel: [ 1.888286] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Feb 12 00:20:00 italy kernel: [ 1.888363] rtc0: alarms up to one year, y3k
Feb 12 00:20:00 italy kernel: [ 1.888492] cpuidle: using governor ladder
Feb 12 00:20:00 italy kernel: [ 1.888540] cpuidle: using governor menu
Feb 12 00:20:00 italy kernel: [ 1.888594] No iBFT detected.
Feb 12 00:20:00 italy kernel: [ 1.889684] TCP cubic registered
Feb 12 00:20:00 italy kernel: [ 1.889734] NET: Registered protocol family 17
Feb 12 00:20:00 italy kernel: [ 1.889792] Using IPI No-Shortcut mode
Feb 12 00:20:00 italy kernel: [ 1.890125] registered taskstats version 1
Feb 12 00:20:00 italy kernel: [ 1.890533] rtc_cmos 00:05: setting system clock to 2009-02-12 00:19:13 UTC (1234397953)
Feb 12 00:20:00 italy kernel: [ 1.891202] Freeing unused kernel memory: 244k freed
Feb 12 00:20:00 italy kernel: [ 1.911147] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 12 00:20:00 italy kernel: [ 2.141989] ACPI: PNP0C0B:00 is registered as cooling_device0
Feb 12 00:20:00 italy kernel: [ 2.142067] ACPI: Fan [FAN] (on)
Feb 12 00:20:00 italy kernel: [ 2.155956] ACPI: CPU0 (power states: C1[C1] C2[C2])
Feb 12 00:20:00 italy kernel: [ 2.156242] ACPI: ACPI0007:00 is registered as cooling_device1
Feb 12 00:20:00 italy kernel: [ 2.160464] ACPI: LNXTHERM:01 is registered as thermal_zone0
Feb 12 00:20:00 italy kernel: [ 2.160792] ACPI: Thermal Zone [THRM] (40 C)
Feb 12 00:20:00 italy kernel: [ 3.272119] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 12 00:20:00 italy kernel: [ 3.272224] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Feb 12 00:20:00 italy kernel: [ 3.272287] 8139cp 0000:00:0b.0: Try the "8139too" driver instead.
Feb 12 00:20:00 italy kernel: [ 3.304353] 8139too Fast Ethernet driver 0.9.28
Feb 12 00:20:00 italy kernel: [ 3.305315] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Feb 12 00:20:00 italy kernel: [ 3.305369] PCI: setting IRQ 11 as level-triggered
Feb 12 00:20:00 italy kernel: [ 3.305377] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 3.306399] eth0: RealTek RTL8139 at 0xd400, 00:02:44:14:3f:2c, IRQ 11
Feb 12 00:20:00 italy kernel: [ 3.306454] eth0: Identified 8139 chip type 'RTL-8139B'
Feb 12 00:20:00 italy kernel: [ 3.816254] usbcore: registered new interface driver usbfs
Feb 12 00:20:00 italy kernel: [ 3.816384] usbcore: registered new interface driver hub
Feb 12 00:20:00 italy kernel: [ 3.816518] usbcore: registered new device driver usb
Feb 12 00:20:00 italy kernel: [ 3.843264] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 12 00:20:00 italy kernel: [ 3.844153] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Feb 12 00:20:00 italy kernel: [ 3.844214] PCI: setting IRQ 10 as level-triggered
Feb 12 00:20:00 italy kernel: [ 3.844222] ACPI: PCI Interrupt 0000:00:0c.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 3.844366] ohci_hcd 0000:00:0c.0: OHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 3.844668] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
Feb 12 00:20:00 italy kernel: [ 3.844757] ohci_hcd 0000:00:0c.0: irq 10, io mem 0xea003000
Feb 12 00:20:00 italy kernel: [ 3.902326] usb usb1: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 3.902458] hub 1-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 3.902529] hub 1-0:1.0: 2 ports detected
Feb 12 00:20:00 italy kernel: [ 3.929843] USB Universal Host Controller Interface driver v3.0
Feb 12 00:20:00 italy kernel: [ 4.012634] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Feb 12 00:20:00 italy kernel: [ 4.012701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.012761] usb usb1: Product: OHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.012810] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 12 00:20:00 italy kernel: [ 4.012860] usb usb1: SerialNumber: 0000:00:0c.0
Feb 12 00:20:00 italy kernel: [ 4.013877] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Feb 12 00:20:00 italy kernel: [ 4.013931] ACPI: PCI Interrupt 0000:00:0c.1[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 4.014074] ohci_hcd 0000:00:0c.1: OHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.014181] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
Feb 12 00:20:00 italy kernel: [ 4.014270] ohci_hcd 0000:00:0c.1: irq 11, io mem 0xea004000
Feb 12 00:20:00 italy kernel: [ 4.018404] BUG: unable to handle kernel paging request at 01251000
Feb 12 00:20:00 italy kernel: [ 4.018532] IP: [<c0163ae0>] handle_mm_fault+0x64/0x690
Feb 12 00:20:00 italy kernel: [ 4.018629] *pde = 00000000
Feb 12 00:20:00 italy kernel: [ 4.018705] Oops: 0000 [#1] SMP
Feb 12 00:20:00 italy kernel: [ 4.018806] Modules linked in: uhci_hcd(+) ehci_hcd(+) ohci_hcd(+) usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 12 00:20:00 italy kernel: [ 4.019223]
Feb 12 00:20:00 italy kernel: [ 4.019266] Pid: 651, comm: sh Not tainted (2.6.26-1-686 #1)
Feb 12 00:20:00 italy kernel: [ 4.019316] EIP: 0060:[<c0163ae0>] EFLAGS: 00010246 CPU: 0
Feb 12 00:20:00 italy kernel: [ 4.019369] EIP is at handle_mm_fault+0x64/0x690
Feb 12 00:20:00 italy kernel: [ 4.019418] EAX: 01251000 EBX: ede2b764 ECX: ede2b764 EDX: c03b85e0
Feb 12 00:20:00 italy kernel: [ 4.019470] ESI: eddeb738 EDI: b7e7df80 EBP: edd3ee80 ESP: edef5f10
Feb 12 00:20:00 italy kernel: [ 4.019522] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 12 00:20:00 italy kernel: [ 4.019573] Process sh (pid: 651, ti=edef4000 task=edd3ee80 task.ti=edef4000)
Feb 12 00:20:00 italy kernel: [ 4.019619] Stack: c0355c80 edee0000 00000000 b7e7df80 ede2b764 eddeb700 000008cc eded8b7c
Feb 12 00:20:00 italy kernel: [ 4.019941] c03b85e0 c018b8a4 edef5fa0 00000001 bf9a3227 edd009a0 edd63b80 00000000
Feb 12 00:20:00 italy kernel: [ 4.020030] 00000000 00000000 00000001 c01ace18 00000001 ef0fb8f0 ef0eec6c ede2b764
Feb 12 00:20:00 italy kernel: [ 4.020030] Call Trace:
Feb 12 00:20:00 italy kernel: [ 4.020030] [<c018b8a4>] simple_read_from_buffer+0x64/0x8d
Feb 12 00:20:00 italy kernel: [ 4.020030] [<c01ace18>] sysfs_read_file+0xde/0xe8
Feb 12 00:20:00 italy kernel: [ 4.020030] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 12 00:20:00 italy kernel: [ 4.020030] [<c0174de3>] sys_read+0x3c/0x63
Feb 12 00:20:00 italy kernel: [ 4.020030] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 12 00:20:00 italy kernel: [ 4.020030] [<c02b980a>] error_code+0x72/0x78
Feb 12 00:20:00 italy kernel: [ 4.020030] =======================
Feb 12 00:20:00 italy kernel: [ 4.020030] Code: 2c 8b 4c 24 10 f6 41 16 40 74 20 8b 44 24 08 8b 4c 24 0c 8b 54 24 10 89 44 24 70 8b 44 24 14 83 c4 5c 5b 5e 5f 5d e9 44 9e 00 00 <8b> 44 24 0c 8b 54 24 14 c1 e8 16 c1 e0 02 89 44 24 1c 8b 52 24
Feb 12 00:20:00 italy kernel: [ 4.020030] EIP: [<c0163ae0>] handle_mm_fault+0x64/0x690 SS:ESP 0068:edef5f10
Feb 12 00:20:00 italy kernel: [ 4.023343] ---[ end trace d5c34e1f0dc40238 ]---
Feb 12 00:20:00 italy kernel: [ 4.062508] Uniform Multi-Platform E-IDE driver
Feb 12 00:20:00 italy kernel: [ 4.062574] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 12 00:20:00 italy kernel: [ 4.070618] usb usb2: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.070746] hub 2-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.070810] hub 2-0:1.0: 2 ports detected
Feb 12 00:20:00 italy kernel: [ 4.172347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Feb 12 00:20:00 italy kernel: [ 4.172414] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.172474] usb usb2: Product: OHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.172523] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 12 00:20:00 italy kernel: [ 4.172573] usb usb2: SerialNumber: 0000:00:0c.1
Feb 12 00:20:00 italy kernel: [ 4.172768] ACPI: PCI Interrupt 0000:00:0c.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 4.172921] ohci_hcd 0000:00:0c.2: OHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.173026] ohci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3
Feb 12 00:20:00 italy kernel: [ 4.173114] ohci_hcd 0000:00:0c.2: irq 11, io mem 0xea005000
Feb 12 00:20:00 italy kernel: [ 4.230327] usb usb3: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.230463] hub 3-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.230536] hub 3-0:1.0: 2 ports detected
Feb 12 00:20:00 italy kernel: [ 4.296170] Marking TSC unstable due to: TSC halts in idle.
Feb 12 00:20:00 italy kernel: [ 4.332307] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 12 00:20:00 italy kernel: [ 4.332363] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.332423] usb usb3: Product: OHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.332471] usb usb3: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 12 00:20:00 italy kernel: [ 4.332521] usb usb3: SerialNumber: 0000:00:0c.2
Feb 12 00:20:00 italy kernel: [ 4.333704] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Feb 12 00:20:00 italy kernel: [ 4.333758] ACPI: PCI Interrupt 0000:00:0c.3[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 4.333904] ehci_hcd 0000:00:0c.3: EHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.334011] ehci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 4
Feb 12 00:20:00 italy kernel: [ 4.356076] ehci_hcd 0000:00:0c.3: debug port 1
Feb 12 00:20:00 italy kernel: [ 4.356162] ehci_hcd 0000:00:0c.3: irq 10, io mem 0xea006000
Feb 12 00:20:00 italy kernel: [ 4.368120] ehci_hcd 0000:00:0c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 12 00:20:00 italy kernel: [ 4.368393] usb usb4: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.368511] hub 4-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.368577] hub 4-0:1.0: 6 ports detected
Feb 12 00:20:00 italy kernel: [ 4.472343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Feb 12 00:20:00 italy kernel: [ 4.472409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.472468] usb usb4: Product: EHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.472517] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 12 00:20:00 italy kernel: [ 4.472567] usb usb4: SerialNumber: 0000:00:0c.3
Feb 12 00:20:00 italy kernel: [ 4.472716] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 4.472856] uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.472959] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
Feb 12 00:20:00 italy kernel: [ 4.473053] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d800
Feb 12 00:20:00 italy kernel: [ 4.473305] usb usb5: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.473419] hub 5-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.473484] hub 5-0:1.0: 2 ports detected
Feb 12 00:20:00 italy kernel: [ 4.576393] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 12 00:20:00 italy kernel: [ 4.576460] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.576520] usb usb5: Product: UHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.576568] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 12 00:20:00 italy kernel: [ 4.576618] usb usb5: SerialNumber: 0000:00:10.0
Feb 12 00:20:00 italy kernel: [ 4.576778] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 4.576918] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.577022] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
Feb 12 00:20:00 italy kernel: [ 4.577118] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000dc00
Feb 12 00:20:00 italy kernel: [ 4.577368] usb usb6: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.577483] hub 6-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.577547] hub 6-0:1.0: 2 ports detected
Feb 12 00:20:00 italy kernel: [ 4.680295] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 12 00:20:00 italy kernel: [ 4.680361] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.680421] usb usb6: Product: UHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.680469] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 12 00:20:00 italy kernel: [ 4.680519] usb usb6: SerialNumber: 0000:00:10.1
Feb 12 00:20:00 italy kernel: [ 4.680669] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 4.680810] uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.680915] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
Feb 12 00:20:00 italy kernel: [ 4.681006] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
Feb 12 00:20:00 italy kernel: [ 4.681267] usb usb7: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.681384] hub 7-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.681448] hub 7-0:1.0: 2 ports detected
Feb 12 00:20:00 italy kernel: [ 4.732059] usb 4-5: new high speed USB device using ehci_hcd and address 2
Feb 12 00:20:00 italy kernel: [ 4.784268] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 12 00:20:00 italy kernel: [ 4.784324] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.784383] usb usb7: Product: UHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.784432] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 12 00:20:00 italy kernel: [ 4.784482] usb usb7: SerialNumber: 0000:00:10.2
Feb 12 00:20:00 italy kernel: [ 4.784618] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 4.784770] ehci_hcd 0000:00:10.3: EHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.784874] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
Feb 12 00:20:00 italy kernel: [ 4.785011] ehci_hcd 0000:00:10.3: irq 11, io mem 0xea007000
Feb 12 00:20:00 italy kernel: [ 4.856045] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 12 00:20:00 italy kernel: [ 4.856291] usb usb8: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.856412] hub 8-0:1.0: USB hub found
Feb 12 00:20:00 italy kernel: [ 4.857116] hub 8-0:1.0: 6 ports detected
Feb 12 00:20:00 italy kernel: [ 4.866673] usb 4-5: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 4.867948] usb 4-5: New USB device found, idVendor=059f, idProduct=0951
Feb 12 00:20:00 italy kernel: [ 4.868050] usb 4-5: New USB device strings: Mfr=10, Product=11, SerialNumber=5
Feb 12 00:20:00 italy kernel: [ 4.868111] usb 4-5: Product: LaCie Hard Drive USB
Feb 12 00:20:00 italy kernel: [ 4.868160] usb 4-5: Manufacturer: LaCie SA
Feb 12 00:20:00 italy kernel: [ 4.868206] usb 4-5: SerialNumber: 031D703971FF
Feb 12 00:20:00 italy kernel: [ 4.960253] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Feb 12 00:20:00 italy kernel: [ 4.960313] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 12 00:20:00 italy kernel: [ 4.960373] usb usb8: Product: EHCI Host Controller
Feb 12 00:20:00 italy kernel: [ 4.960421] usb usb8: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 12 00:20:00 italy kernel: [ 4.960471] usb usb8: SerialNumber: 0000:00:10.3
Feb 12 00:20:00 italy kernel: [ 4.965482] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
Feb 12 00:20:00 italy kernel: [ 4.965600] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 4.965728] VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 10
Feb 12 00:20:00 italy kernel: [ 4.965809] VP_IDE: not 100% native mode: will probe irqs later
Feb 12 00:20:00 italy kernel: [ 4.965895] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Feb 12 00:20:00 italy kernel: [ 4.965969] ide0: BM-DMA at 0xe400-0xe407
Feb 12 00:20:00 italy kernel: [ 4.966027] ide1: BM-DMA at 0xe408-0xe40f
Feb 12 00:20:00 italy kernel: [ 4.966077] Probing IDE interface ide0...
Feb 12 00:20:00 italy kernel: [ 5.380245] hda: Maxtor 6B200P0, ATA DISK drive
Feb 12 00:20:00 italy kernel: [ 5.509532] SCSI subsystem initialized
Feb 12 00:20:00 italy kernel: [ 5.518467] Initializing USB Mass Storage driver...
Feb 12 00:20:00 italy kernel: [ 5.644289] scsi0 : SCSI emulation for USB Mass Storage devices
Feb 12 00:20:00 italy kernel: [ 5.644994] usbcore: registered new interface driver usb-storage
Feb 12 00:20:00 italy kernel: [ 5.645052] USB Mass Storage support registered.
Feb 12 00:20:00 italy kernel: [ 5.649961] usb-storage: device found at 2
Feb 12 00:20:00 italy kernel: [ 5.650022] usb-storage: waiting for device to settle before scanning
Feb 12 00:20:00 italy kernel: [ 6.060148] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 12 00:20:00 italy kernel: [ 6.061715] hda: UDMA/133 mode selected
Feb 12 00:20:00 italy kernel: [ 6.063269] Probing IDE interface ide1...
Feb 12 00:20:00 italy kernel: [ 7.208143] hdd: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive
Feb 12 00:20:00 italy kernel: [ 7.264118] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 12 00:20:00 italy kernel: [ 7.264440] hdd: UDMA/66 mode selected
Feb 12 00:20:00 italy kernel: [ 7.264868] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 12 00:20:00 italy kernel: [ 7.287400] ide1 at 0x170-0x177,0x376 on irq 15
Feb 12 00:20:00 italy kernel: [ 7.293005] No dock devices found.
Feb 12 00:20:00 italy kernel: [ 7.315938] libata version 3.00 loaded.
Feb 12 00:20:00 italy kernel: [ 7.405730] hda: max request size: 512KiB
Feb 12 00:20:00 italy kernel: [ 7.408523] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63
Feb 12 00:20:00 italy kernel: [ 7.413279] hda: cache flushes supported
Feb 12 00:20:00 italy kernel: [ 7.413436] hda: hda1 hda2 < hda5 >
Feb 12 00:20:00 italy kernel: [ 7.435098] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Feb 12 00:20:00 italy kernel: [ 7.435343] Uniform CD-ROM driver Revision: 3.20
Feb 12 00:20:00 italy kernel: [ 7.713554] device-mapper: uevent: version 1.0.3
Feb 12 00:20:00 italy kernel: [ 7.716457] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Feb 12 00:20:00 italy kernel: [ 10.648998] usb-storage: device scan complete
Feb 12 00:20:00 italy kernel: [ 10.737858] scsi 0:0:0:0: Direct-Access SAMSUNG HD500LJ PQ: 0 ANSI: 2 CCS
Feb 12 00:20:00 italy kernel: [ 10.778008] Driver 'sd' needs updating - please use bus_type methods
Feb 12 00:20:00 italy kernel: [ 10.779974] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 12 00:20:00 italy kernel: [ 10.781207] sd 0:0:0:0: [sda] Write Protect is off
Feb 12 00:20:00 italy kernel: [ 10.781219] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 12 00:20:00 italy kernel: [ 10.781225] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 12 00:20:00 italy kernel: [ 10.783472] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 12 00:20:00 italy kernel: [ 10.784849] sd 0:0:0:0: [sda] Write Protect is off
Feb 12 00:20:00 italy kernel: [ 10.784862] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 12 00:20:00 italy kernel: [ 10.784868] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 12 00:20:00 italy kernel: [ 10.784876] sda: sda1
Feb 12 00:20:00 italy kernel: [ 10.786316] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 12 00:20:00 italy kernel: [ 10.980053] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 12 00:20:00 italy kernel: [ 11.240050] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 12 00:20:00 italy kernel: [ 19.905376] PM: Starting manual resume from disk
Feb 12 00:20:00 italy kernel: [ 19.947387] EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 12 00:20:00 italy kernel: [ 19.947455] EXT3-fs: write access will be enabled during recovery.
Feb 12 00:20:00 italy kernel: [ 25.256689] kjournald starting. Commit interval 5 seconds
Feb 12 00:20:00 italy kernel: [ 25.256798] EXT3-fs: dm-1: orphan cleanup on readonly fs
Feb 12 00:20:00 italy kernel: [ 25.344338] ext3_orphan_cleanup: deleting unreferenced inode 421838
Feb 12 00:20:00 italy kernel: [ 25.433075] ext3_orphan_cleanup: deleting unreferenced inode 421831
Feb 12 00:20:00 italy kernel: [ 25.613388] ext3_orphan_cleanup: deleting unreferenced inode 827588
Feb 12 00:20:00 italy kernel: [ 25.636968] ext3_orphan_cleanup: deleting unreferenced inode 811453
Feb 12 00:20:00 italy kernel: [ 25.637026] ext3_orphan_cleanup: deleting unreferenced inode 827434
Feb 12 00:20:00 italy kernel: [ 25.637044] ext3_orphan_cleanup: deleting unreferenced inode 827433
Feb 12 00:20:00 italy kernel: [ 25.637059] ext3_orphan_cleanup: deleting unreferenced inode 827432
Feb 12 00:20:00 italy kernel: [ 25.637073] ext3_orphan_cleanup: deleting unreferenced inode 827431
Feb 12 00:20:00 italy kernel: [ 25.637088] ext3_orphan_cleanup: deleting unreferenced inode 827430
Feb 12 00:20:00 italy kernel: [ 25.637101] EXT3-fs: dm-1: 9 orphan inodes deleted
Feb 12 00:20:00 italy kernel: [ 25.637151] EXT3-fs: recovery complete.
Feb 12 00:20:00 italy kernel: [ 25.644144] EXT3-fs: mounted filesystem with ordered data mode.
Feb 12 00:20:00 italy kernel: [ 29.068584] udevd version 125 started
Feb 12 00:20:00 italy kernel: [ 30.045211] hda: UDMA/133 mode selected
Feb 12 00:20:00 italy kernel: [ 30.055936] hdd: UDMA/66 mode selected
Feb 12 00:20:00 italy kernel: [ 30.096107] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 12 00:20:00 italy kernel: [ 31.083663] BUG: unable to handle kernel NULL pointer dereference at 00000edc
Feb 12 00:20:00 italy kernel: [ 31.083790] IP: [<c011795c>] huge_pte_alloc+0xe/0x29
Feb 12 00:20:00 italy kernel: [ 31.083882] *pde = 00000000
Feb 12 00:20:00 italy kernel: [ 31.083958] Oops: 0000 [#2] SMP
Feb 12 00:20:00 italy kernel: [ 31.084039] Modules linked in: evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc sd_mod dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod ide_disk cdrom ata_generic libata dock usb_storage scsi_mod via82cxxx ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 12 00:20:00 italy kernel: [ 31.084039]
Feb 12 00:20:00 italy kernel: [ 31.084039] Pid: 1454, comm: udevd Tainted: G D (2.6.26-1-686 #1)
Feb 12 00:20:00 italy kernel: [ 31.084039] EIP: 0060:[<c011795c>] EFLAGS: 00010202 CPU: 0
Feb 12 00:20:00 italy kernel: [ 31.084039] EIP is at huge_pte_alloc+0xe/0x29
Feb 12 00:20:00 italy kernel: [ 31.084039] EAX: edd91d00 EBX: 00000000 ECX: edcc3d4c EDX: 00000edc
Feb 12 00:20:00 italy kernel: [ 31.084039] ESI: edd91d98 EDI: b7d8a200 EBP: ef44e480 ESP: edcc1f74
Feb 12 00:20:00 italy kernel: [ 31.084039] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 12 00:20:00 italy kernel: [ 31.084039] Process udevd (pid: 1454, ti=edcc0000 task=ef44e480 task.ti=edcc0000)
Feb 12 00:20:00 italy kernel: [ 31.084039] Stack: edcc3d4c c016d941 c0115b4f edcc3d4c 00000004 edcc1fb8 edd91d60 00000000
Feb 12 00:20:00 italy kernel: [ 31.084039] 08eb96b8 00000000 c012dc68 00000007 bfc13e70 08eb96b8 c01158b4 bfc13f08
Feb 12 00:20:00 italy kernel: [ 31.084039] c02b980a bfc13e70 00000000 fffffffe 08eb96b8 08eb96b8 bfc13f08 bfc13e74
Feb 12 00:20:00 italy kernel: [ 31.084039] Call Trace:
Feb 12 00:20:00 italy kernel: [ 31.084039] [<c016d941>] hugetlb_fault+0x1d/0x2c7
Feb 12 00:20:00 italy kernel: [ 31.084039] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 12 00:20:00 italy kernel: [ 31.084039] [<c012dc68>] sys_setpriority+0x8a/0x18d
Feb 12 00:20:00 italy kernel: [ 31.084039] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 12 00:20:00 italy kernel: [ 31.084039] [<c02b980a>] error_code+0x72/0x78
Feb 12 00:20:00 italy kernel: [ 31.084039] =======================
Feb 12 00:20:00 italy kernel: [ 31.084039] Code: ff ff ff 89 46 20 59 5b eb 09 89 df eb 05 bf ea ff ff ff 83 c4 18 89 f8 5b 5e 5f 5d c3 c1 ea 16 53 31 db c1 e2 02 03 50 24 74 17 <83> 3a 00 89 d3 74 10 8b 02 e8 f0 d3 ff ff 90 84 c0 78 04 0f 0b
Feb 12 00:20:00 italy kernel: [ 31.084039] EIP: [<c011795c>] huge_pte_alloc+0xe/0x29 SS:ESP 0068:edcc1f74
Feb 12 00:20:00 italy kernel: [ 31.089319] ---[ end trace d5c34e1f0dc40238 ]---
Feb 12 00:20:00 italy kernel: [ 32.154721] Linux agpgart interface v0.103
Feb 12 00:20:00 italy kernel: [ 32.193628] agpgart: Detected VIA KT266/KY266x/KT333 chipset
Feb 12 00:20:00 italy kernel: [ 32.204473] agpgart: AGP aperture is 128M @ 0xd0000000
Feb 12 00:20:00 italy kernel: [ 32.215923] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 12 00:20:00 italy kernel: [ 32.265161] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 12 00:20:00 italy kernel: [ 32.761255] Linux video capture interface: v2.00
Feb 12 00:20:00 italy kernel: [ 32.969971] bttv: driver version 0.9.17 loaded
Feb 12 00:20:00 italy kernel: [ 32.970033] bttv: using 8 buffers with 2080k (520 pages) each for capture
Feb 12 00:20:00 italy kernel: [ 32.970174] bttv: Bt8xx card found (0).
Feb 12 00:20:00 italy kernel: [ 32.970257] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 32.970393] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xea000000
Feb 12 00:20:00 italy kernel: [ 32.974405] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Feb 12 00:20:00 italy kernel: [ 32.974470] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Feb 12 00:20:00 italy kernel: [ 32.974569] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Feb 12 00:20:00 italy kernel: [ 32.977108] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Feb 12 00:20:00 italy kernel: [ 33.004961] tveeprom 0-0050: Hauppauge model 44801, rev D182, serial# 2772248
Feb 12 00:20:00 italy kernel: [ 33.005018] tveeprom 0-0050: tuner model is LG TAPC H791F (idx 82, type 39)
Feb 12 00:20:00 italy kernel: [ 33.005073] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
Feb 12 00:20:00 italy kernel: [ 33.005125] tveeprom 0-0050: audio processor is None (idx 0)
Feb 12 00:20:00 italy kernel: [ 33.005175] tveeprom 0-0050: has no radio
Feb 12 00:20:00 italy kernel: [ 33.005221] bttv0: Hauppauge eeprom indicates model#44801
Feb 12 00:20:00 italy kernel: [ 33.005271] bttv0: tuner type=39
Feb 12 00:20:00 italy kernel: [ 33.005319] bttv0: i2c: checking for MSP34xx @ 0x80... not found
Feb 12 00:20:00 italy kernel: [ 33.617134] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 12 00:20:00 italy kernel: [ 33.621068] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 12 00:20:00 italy kernel: [ 33.688764] input: Power Button (FF) as /class/input/input1
Feb 12 00:20:00 italy kernel: [ 33.717266] ACPI: Power Button (FF) [PWRF]
Feb 12 00:20:00 italy kernel: [ 33.717504] input: Power Button (CM) as /class/input/input2
Feb 12 00:20:00 italy kernel: [ 33.747710] ACPI: Power Button (CM) [PWRB]
Feb 12 00:20:00 italy kernel: [ 33.747938] input: Sleep Button (CM) as /class/input/input3
Feb 12 00:20:00 italy kernel: [ 33.776208] ACPI: Sleep Button (CM) [SLPB]
Feb 12 00:20:00 italy kernel: [ 34.184478] tuner' 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
Feb 12 00:20:00 italy kernel: [ 34.736954] tuner-simple 0-0061: creating new instance
Feb 12 00:20:00 italy kernel: [ 34.737020] tuner-simple 0-0061: type set to 39 (LG NTSC (newer TAPC series))
Feb 12 00:20:00 italy kernel: [ 34.746192] bttv0: registered device video0
Feb 12 00:20:00 italy kernel: [ 34.746282] bttv0: registered device vbi0
Feb 12 00:20:00 italy kernel: [ 34.746352] bttv0: PLL: 28636363 => 35468950 .. ok
Feb 12 00:20:00 italy kernel: [ 35.379934] input: PC Speaker as /class/input/input4
Feb 12 00:20:00 italy kernel: [ 35.944131] hub 4-0:1.0: unable to enumerate USB device on port 1
Feb 12 00:20:00 italy kernel: [ 36.245847] NET: Registered protocol family 23
Feb 12 00:20:00 italy kernel: [ 36.331351] parport_pc 00:0a: reported by Plug and Play ACPI
Feb 12 00:20:00 italy kernel: [ 36.331480] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Feb 12 00:20:00 italy kernel: [ 36.540150] usb 4-1: new high speed USB device using ehci_hcd and address 4
Feb 12 00:20:00 italy kernel: [ 36.596267] hub 4-0:1.0: unable to enumerate USB device on port 1
Feb 12 00:20:00 italy kernel: [ 36.657328] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
Feb 12 00:20:00 italy kernel: [ 36.868863] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 37.052123] usb 1-1: new full speed USB device using ohci_hcd and address 2
Feb 12 00:20:00 italy kernel: [ 37.277218] usb 1-1: not running at top speed; connect to a high speed hub
Feb 12 00:20:00 italy kernel: [ 37.389420] usb 1-1: configuration #1 chosen from 1 choice
Feb 12 00:20:00 italy kernel: [ 37.393568] scsi1 : SCSI emulation for USB Mass Storage devices
Feb 12 00:20:00 italy kernel: [ 37.394035] usb 1-1: New USB device found, idVendor=07ab, idProduct=fcfe
Feb 12 00:20:00 italy kernel: [ 37.394740] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 12 00:20:00 italy kernel: [ 37.394794] usb 1-1: Product: Freecom Hard Drive
Feb 12 00:20:00 italy kernel: [ 37.394842] usb 1-1: Manufacturer: Freecom
Feb 12 00:20:00 italy kernel: [ 37.394888] usb 1-1: SerialNumber: 01860D8900920
Feb 12 00:20:00 italy kernel: [ 37.394963] usb-storage: device found at 2
Feb 12 00:20:00 italy kernel: [ 37.395010] usb-storage: waiting for device to settle before scanning
Feb 12 00:20:00 italy kernel: [ 37.961286] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 12 00:20:00 italy kernel: [ 37.962114] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
Feb 12 00:20:00 italy kernel: [ 39.201071] hda: UDMA/133 mode selected
Feb 12 00:20:00 italy kernel: [ 39.235048] hdd: UDMA/66 mode selected
Feb 12 00:20:00 italy kernel: [ 39.870170] EXT3 FS on dm-1, internal journal
Feb 12 00:20:00 italy kernel: [ 40.283330] loop: module loaded
Feb 12 00:20:00 italy kernel: [ 40.379109] [drm] Initialized drm 1.1.0 20060810
Feb 12 00:20:00 italy kernel: [ 40.422308] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 12 00:20:00 italy kernel: [ 40.422602] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Feb 12 00:20:00 italy kernel: [ 42.395672] usb-storage: device scan complete
Feb 12 00:20:00 italy kernel: [ 42.431639] scsi 1:0:0:0: Direct-Access SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 0
Feb 12 00:20:00 italy kernel: [ 42.461566] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 12 00:20:00 italy kernel: [ 42.475577] sd 1:0:0:0: [sdb] Write Protect is off
Feb 12 00:20:00 italy kernel: [ 42.475641] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 12 00:20:00 italy kernel: [ 42.475691] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 12 00:20:00 italy kernel: [ 42.486607] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 12 00:20:00 italy kernel: [ 42.500608] sd 1:0:0:0: [sdb] Write Protect is off
Feb 12 00:20:00 italy kernel: [ 42.500675] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 12 00:20:00 italy kernel: [ 42.500725] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 12 00:20:00 italy kernel: [ 42.500788] sdb:<6>kjournald starting. Commit interval 5 seconds
Feb 12 00:20:00 italy kernel: [ 45.772451] EXT3 FS on hda1, internal journal
Feb 12 00:20:00 italy kernel: [ 45.772451] EXT3-fs: mounted filesystem with ordered data mode.
Feb 12 00:20:00 italy kernel: [ 45.822103] kjournald starting. Commit interval 5 seconds
Feb 12 00:20:00 italy kernel: [ 45.835143] EXT3 FS on dm-3, internal journal
Feb 12 00:20:00 italy kernel: [ 45.835143] EXT3-fs: mounted filesystem with ordered data mode.
Feb 12 00:20:00 italy kernel: [ 45.875245] kjournald starting. Commit interval 5 seconds
Feb 12 00:20:00 italy kernel: [ 45.875330] EXT3-fs: mounted filesystem with ordered data mode.
Feb 12 00:20:00 italy kernel: [ 45.912555] Adding 2330616k swap on /dev/mapper/italy-swap_1. Priority:-1 extents:1 across:2330616k
Feb 12 00:20:00 italy kernel: [ 47.550407] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Feb 13 23:01:45 italy kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Feb 13 23:01:45 italy kernel: [ 0.000000] Initializing cgroup subsys cpuset
Feb 13 23:01:45 italy kernel: [ 0.000000] Initializing cgroup subsys cpu
Feb 13 23:01:45 italy kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
Feb 13 23:01:45 italy kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb 13 23:01:45 italy kernel: [ 0.000000] 0MB HIGHMEM available.
Feb 13 23:01:45 italy kernel: [ 0.000000] 767MB LOWMEM available.
Feb 13 23:01:45 italy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Feb 13 23:01:45 italy kernel: [ 0.000000] Zone PFN ranges:
Feb 13 23:01:45 italy kernel: [ 0.000000] DMA 0 -> 4096
Feb 13 23:01:45 italy kernel: [ 0.000000] Normal 4096 -> 196592
Feb 13 23:01:45 italy kernel: [ 0.000000] HighMem 196592 -> 196592
Feb 13 23:01:45 italy kernel: [ 0.000000] Movable zone start PFN for each node
Feb 13 23:01:45 italy kernel: [ 0.000000] early_node_map[1] active PFN ranges
Feb 13 23:01:45 italy kernel: [ 0.000000] 0: 0 -> 196592
Feb 13 23:01:45 italy kernel: [ 0.000000] On node 0 totalpages: 196592
Feb 13 23:01:45 italy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Feb 13 23:01:45 italy kernel: [ 0.000000] DMA zone: 0 pages reserved
Feb 13 23:01:45 italy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Feb 13 23:01:45 italy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Feb 13 23:01:45 italy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Feb 13 23:01:45 italy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Feb 13 23:01:45 italy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Feb 13 23:01:45 italy kernel: [ 0.000000] DMI 2.2 present.
Feb 13 23:01:45 italy kernel: [ 0.000000] ACPI: RSDP 000F62E0, 0014 (r0 VIA694)
Feb 13 23:01:45 italy kernel: [ 0.000000] ACPI: RSDT 2FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 13 23:01:45 italy kernel: [ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 13 23:01:45 italy kernel: [ 0.000000] ACPI: DSDT 2FFF30C0, 3316 (r1 VIA694 AWRDACPI 1000 MSFT 100000E)
Feb 13 23:01:45 italy kernel: [ 0.000000] ACPI: FACS 2FFF0000, 0040
Feb 13 23:01:45 italy kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Feb 13 23:01:45 italy kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
Feb 13 23:01:45 italy kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 13 23:01:45 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Feb 13 23:01:45 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Feb 13 23:01:45 italy kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
Feb 13 23:01:45 italy kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Feb 13 23:01:45 italy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Feb 13 23:01:45 italy kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056
Feb 13 23:01:45 italy kernel: [ 0.000000] Kernel command line: root=/dev/mapper/italy-root ro
Feb 13 23:01:45 italy kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Feb 13 23:01:45 italy kernel: [ 0.000000] mapped APIC to ffffb000 (0160f000)
Feb 13 23:01:45 italy kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Feb 13 23:01:45 italy kernel: [ 0.000000] Initializing CPU#0
Feb 13 23:01:45 italy kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 13 23:01:45 italy kernel: [ 0.000000] Detected 930.689 MHz processor.
Feb 13 23:01:45 italy kernel: [ 0.004000] Console: colour VGA+ 80x25
Feb 13 23:01:45 italy kernel: [ 0.004000] console [tty0] enabled
Feb 13 23:01:45 italy kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 13 23:01:45 italy kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 13 23:01:45 italy kernel: [ 0.004000] Memory: 768324k/786368k available (1769k kernel code, 17452k reserved, 752k data, 244k init, 0k highmem)
Feb 13 23:01:45 italy kernel: [ 0.004000] virtual kernel memory layout:
Feb 13 23:01:45 italy kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Feb 13 23:01:45 italy kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 13 23:01:45 italy kernel: [ 0.004000] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
Feb 13 23:01:45 italy kernel: [ 0.004000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
Feb 13 23:01:45 italy kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Feb 13 23:01:45 italy kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Feb 13 23:01:45 italy kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Feb 13 23:01:45 italy kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 13 23:01:45 italy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Feb 13 23:01:45 italy kernel: [ 0.084276] Calibrating delay using timer specific routine.. 1863.87 BogoMIPS (lpj=3727756)
Feb 13 23:01:45 italy kernel: [ 0.084444] Security Framework initialized
Feb 13 23:01:45 italy kernel: [ 0.084501] SELinux: Disabled at boot.
Feb 13 23:01:45 italy kernel: [ 0.084551] Capability LSM initialized
Feb 13 23:01:45 italy kernel: [ 0.084628] Mount-cache hash table entries: 512
Feb 13 23:01:45 italy kernel: [ 0.084980] Initializing cgroup subsys ns
Feb 13 23:01:45 italy kernel: [ 0.085032] Initializing cgroup subsys cpuacct
Feb 13 23:01:45 italy kernel: [ 0.085081] Initializing cgroup subsys devices
Feb 13 23:01:45 italy kernel: [ 0.085163] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 13 23:01:45 italy kernel: [ 0.085218] CPU: L2 Cache: 256K (64 bytes/line)
Feb 13 23:01:45 italy kernel: [ 0.085269] Intel machine check architecture supported.
Feb 13 23:01:45 italy kernel: [ 0.085320] Intel machine check reporting enabled on CPU#0.
Feb 13 23:01:45 italy kernel: [ 0.085393] Checking 'hlt' instruction... OK.
Feb 13 23:01:45 italy kernel: [ 0.100368] SMP alternatives: switching to UP code
Feb 13 23:01:45 italy kernel: [ 0.114510] Freeing SMP alternatives: 16k freed
Feb 13 23:01:45 italy kernel: [ 0.114568] ACPI: Core revision 20080321
Feb 13 23:01:45 italy kernel: [ 0.123967] ACPI: setting ELCR to 0200 (from 0e00)
Feb 13 23:01:45 italy kernel: [ 0.128008] weird, boot CPU (#0) not listedby the BIOS.
Feb 13 23:01:45 italy kernel: [ 0.128008] SMP motherboard not detected.
Feb 13 23:01:45 italy kernel: [ 0.128008] Local APIC not detected. Using dummy APIC emulation.
Feb 13 23:01:45 italy kernel: [ 0.128008] SMP disabled
Feb 13 23:01:45 italy kernel: [ 0.128008] Brought up 1 CPUs
Feb 13 23:01:45 italy kernel: [ 0.128008] Total of 1 processors activated (1863.87 BogoMIPS).
Feb 13 23:01:45 italy kernel: [ 0.128008] CPU0 attaching sched-domain:
Feb 13 23:01:45 italy kernel: [ 0.128008] domain 0: span 0
Feb 13 23:01:45 italy kernel: [ 0.128008] groups: 0
Feb 13 23:01:45 italy kernel: [ 0.128008] net_namespace: 660 bytes
Feb 13 23:01:45 italy kernel: [ 0.128008] Booting paravirtualized kernel on bare hardware
Feb 13 23:01:45 italy kernel: [ 0.128577] NET: Registered protocol family 16
Feb 13 23:01:45 italy kernel: [ 0.129149] ACPI: bus type pci registered
Feb 13 23:01:45 italy kernel: [ 0.131710] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
Feb 13 23:01:45 italy kernel: [ 0.131764] PCI: Using configuration type 1 for base access
Feb 13 23:01:45 italy kernel: [ 0.131835] Setting up standard PCI resources
Feb 13 23:01:45 italy kernel: [ 0.137990] ACPI: EC: Look up EC in DSDT
Feb 13 23:01:45 italy kernel: [ 0.146350] ACPI: Interpreter enabled
Feb 13 23:01:45 italy kernel: [ 0.146408] ACPI: (supports S0 S1 S4 S5)
Feb 13 23:01:45 italy kernel: [ 0.146595] ACPI: Using PIC for interrupt routing
Feb 13 23:01:45 italy kernel: [ 0.155403] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 13 23:01:45 italy kernel: [ 0.156548] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
Feb 13 23:01:45 italy kernel: [ 0.156606] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
Feb 13 23:01:45 italy kernel: [ 0.156924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 13 23:01:45 italy kernel: [ 0.201087] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 13 23:01:45 italy kernel: [ 0.201851] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 13 23:01:45 italy kernel: [ 0.202612] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 13 23:01:45 italy kernel: [ 0.203369] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 13 23:01:45 italy kernel: [ 0.204134] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 13 23:01:45 italy kernel: [ 0.204259] pnp: PnP ACPI init
Feb 13 23:01:45 italy kernel: [ 0.204320] ACPI: bus type pnp registered
Feb 13 23:01:45 italy kernel: [ 0.211068] pnp: PnP ACPI: found 13 devices
Feb 13 23:01:45 italy kernel: [ 0.211125] ACPI: ACPI bus type pnp unregistered
Feb 13 23:01:45 italy kernel: [ 0.211177] PnPBIOS: Disabled by ACPI PNP
Feb 13 23:01:45 italy kernel: [ 0.211892] PCI: Using ACPI for IRQ routing
Feb 13 23:01:45 italy kernel: [ 0.212444] ACPI: RTC can wake from S4
Feb 13 23:01:45 italy kernel: [ 0.212556] system 00:00: iomem range 0xcd000-0xcffff has been reserved
Feb 13 23:01:45 italy kernel: [ 0.212612] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.212667] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.212722] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.212776] system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.212838] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.212900] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.212953] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
Feb 13 23:01:45 italy kernel: [ 0.213014] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Feb 13 23:01:45 italy kernel: [ 0.213069] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
Feb 13 23:01:45 italy kernel: [ 0.213136] system 00:02: ioport range 0x4000-0x407f has been reserved
Feb 13 23:01:45 italy kernel: [ 0.213190] system 00:02: ioport range 0x5000-0x500f has been reserved
Feb 13 23:01:45 italy kernel: [ 0.213264] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Feb 13 23:01:45 italy kernel: [ 0.213318] system 00:03: ioport range 0x800-0x805 has been reserved
Feb 13 23:01:45 italy kernel: [ 0.213371] system 00:03: ioport range 0x290-0x297 has been reserved
Feb 13 23:01:45 italy kernel: [ 0.244409] PCI: Bridge: 0000:00:01.0
Feb 13 23:01:45 italy kernel: [ 0.244459] IO window: c000-cfff
Feb 13 23:01:45 italy kernel: [ 0.244507] MEM window: 0xe8000000-0xe9ffffff
Feb 13 23:01:45 italy kernel: [ 0.244557] PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
Feb 13 23:01:45 italy kernel: [ 0.244630] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 13 23:01:45 italy kernel: [ 0.244677] NET: Registered protocol family 2
Feb 13 23:01:45 italy kernel: [ 0.244933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 13 23:01:45 italy kernel: [ 0.245778] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 13 23:01:45 italy kernel: [ 0.250731] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 13 23:01:45 italy kernel: [ 0.253316] TCP: Hash tables configured (established 131072 bind 65536)
Feb 13 23:01:45 italy kernel: [ 0.253375] TCP reno registered
Feb 13 23:01:45 italy kernel: [ 0.253706] NET: Registered protocol family 1
Feb 13 23:01:45 italy kernel: [ 0.254043] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
Feb 13 23:01:45 italy kernel: [ 0.829745] it is
Feb 13 23:01:45 italy kernel: [ 1.516719] Freeing initrd memory: 7199k freed
Feb 13 23:01:45 italy kernel: [ 1.518364] audit: initializing netlink socket (disabled)
Feb 13 23:01:45 italy kernel: [ 1.518448] type=2000 audit(1234566054.516:1): initialized
Feb 13 23:01:45 italy kernel: [ 1.518777] Total HugeTLB memory allocated, 0
Feb 13 23:01:45 italy kernel: [ 1.518991] VFS: Disk quotas dquot_6.5.1
Feb 13 23:01:45 italy kernel: [ 1.519104] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 13 23:01:45 italy kernel: [ 1.519234] msgmni has been set to 1515
Feb 13 23:01:45 italy kernel: [ 1.519512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 13 23:01:45 italy kernel: [ 1.519577] io scheduler noop registered
Feb 13 23:01:45 italy kernel: [ 1.519624] io scheduler anticipatory registered
Feb 13 23:01:45 italy kernel: [ 1.519671] io scheduler deadline registered
Feb 13 23:01:45 italy kernel: [ 1.519731] io scheduler cfq registered (default)
Feb 13 23:01:45 italy kernel: [ 1.519800] PCI: VIA PCI bridge detected.Disabling DAC.
Feb 13 23:01:45 italy kernel: [ 1.520069] pci 0000:01:00.0: Boot video device
Feb 13 23:01:45 italy kernel: [ 1.520889] isapnp: Scanning for PnP cards...
Feb 13 23:01:45 italy kernel: [ 1.874916] isapnp: No Plug & Play device found
Feb 13 23:01:45 italy kernel: [ 1.882086] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 13 23:01:45 italy kernel: [ 1.882352] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 13 23:01:45 italy kernel: [ 1.882563] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 13 23:01:45 italy kernel: [ 1.883291] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 13 23:01:45 italy kernel: [ 1.883614] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 13 23:01:45 italy kernel: [ 1.887330] brd: module loaded
Feb 13 23:01:45 italy kernel: [ 1.887611] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 13 23:01:45 italy kernel: [ 1.888160] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 13 23:01:45 italy kernel: [ 1.888218] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 13 23:01:45 italy kernel: [ 1.888626] mice: PS/2 mouse device common for all mice
Feb 13 23:01:45 italy kernel: [ 1.888983] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Feb 13 23:01:45 italy kernel: [ 1.889060] rtc0: alarms up to one year, y3k
Feb 13 23:01:45 italy kernel: [ 1.889187] cpuidle: using governor ladder
Feb 13 23:01:45 italy kernel: [ 1.889236] cpuidle: using governor menu
Feb 13 23:01:45 italy kernel: [ 1.889289] No iBFT detected.
Feb 13 23:01:45 italy kernel: [ 1.890385] TCP cubic registered
Feb 13 23:01:45 italy kernel: [ 1.890435] NET: Registered protocol family 17
Feb 13 23:01:45 italy kernel: [ 1.890493] Using IPI No-Shortcut mode
Feb 13 23:01:45 italy kernel: [ 1.890829] registered taskstats version 1
Feb 13 23:01:45 italy kernel: [ 1.891239] rtc_cmos 00:05: setting system clock to 2009-02-13 23:00:55 UTC (1234566055)
Feb 13 23:01:45 italy kernel: [ 1.891884] Freeing unused kernel memory: 244k freed
Feb 13 23:01:45 italy kernel: [ 1.911484] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 13 23:01:45 italy kernel: [ 2.144336] ACPI: PNP0C0B:00 is registered as cooling_device0
Feb 13 23:01:45 italy kernel: [ 2.144413] ACPI: Fan [FAN] (on)
Feb 13 23:01:45 italy kernel: [ 2.158408] ACPI: CPU0 (power states: C1[C1] C2[C2])
Feb 13 23:01:45 italy kernel: [ 2.158668] ACPI: ACPI0007:00 is registered as cooling_device1
Feb 13 23:01:45 italy kernel: [ 2.162817] ACPI: LNXTHERM:01 is registered as thermal_zone0
Feb 13 23:01:45 italy kernel: [ 2.163144] ACPI: Thermal Zone [THRM] (40 C)
Feb 13 23:01:45 italy kernel: [ 3.078717] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 13 23:01:45 italy kernel: [ 3.078818] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Feb 13 23:01:45 italy kernel: [ 3.078880] 8139cp 0000:00:0b.0: Try the "8139too" driver instead.
Feb 13 23:01:45 italy kernel: [ 3.110534] 8139too Fast Ethernet driver 0.9.28
Feb 13 23:01:45 italy kernel: [ 3.111489] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Feb 13 23:01:45 italy kernel: [ 3.111543] PCI: setting IRQ 11 as level-triggered
Feb 13 23:01:45 italy kernel: [ 3.111551] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 3.112597] eth0: RealTek RTL8139 at 0xd400, 00:02:44:14:3f:2c, IRQ 11
Feb 13 23:01:45 italy kernel: [ 3.112651] eth0: Identified 8139 chip type 'RTL-8139B'
Feb 13 23:01:45 italy kernel: [ 3.431769] usbcore: registered new interface driver usbfs
Feb 13 23:01:45 italy kernel: [ 3.431897] usbcore: registered new interface driver hub
Feb 13 23:01:45 italy kernel: [ 3.432045] usbcore: registered new device driver usb
Feb 13 23:01:45 italy kernel: [ 3.454152] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 13 23:01:45 italy kernel: [ 3.455031] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Feb 13 23:01:45 italy kernel: [ 3.455093] PCI: setting IRQ 10 as level-triggered
Feb 13 23:01:45 italy kernel: [ 3.455101] ACPI: PCI Interrupt 0000:00:0c.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 3.455247] ohci_hcd 0000:00:0c.0: OHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.455564] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
Feb 13 23:01:45 italy kernel: [ 3.455654] ohci_hcd 0000:00:0c.0: irq 10, io mem 0xea003000
Feb 13 23:01:45 italy kernel: [ 3.513789] usb usb1: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 3.513919] hub 1-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 3.513990] hub 1-0:1.0: 2 ports detected
Feb 13 23:01:45 italy kernel: [ 3.616422] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Feb 13 23:01:45 italy kernel: [ 3.616489] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 3.616549] usb usb1: Product: OHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.616597] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 13 23:01:45 italy kernel: [ 3.616647] usb usb1: SerialNumber: 0000:00:0c.0
Feb 13 23:01:45 italy kernel: [ 3.617595] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Feb 13 23:01:45 italy kernel: [ 3.617649] ACPI: PCI Interrupt 0000:00:0c.1[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 3.617795] ohci_hcd 0000:00:0c.1: OHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.617908] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
Feb 13 23:01:45 italy kernel: [ 3.617998] ohci_hcd 0000:00:0c.1: irq 11, io mem 0xea004000
Feb 13 23:01:45 italy kernel: [ 3.674307] usb usb2: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 3.674436] hub 2-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 3.674506] hub 2-0:1.0: 2 ports detected
Feb 13 23:01:45 italy kernel: [ 3.776387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Feb 13 23:01:45 italy kernel: [ 3.776454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 3.776514] usb usb2: Product: OHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.776562] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 13 23:01:45 italy kernel: [ 3.776612] usb usb2: SerialNumber: 0000:00:0c.1
Feb 13 23:01:45 italy kernel: [ 3.776717] ACPI: PCI Interrupt 0000:00:0c.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 3.776866] ohci_hcd 0000:00:0c.2: OHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.776966] ohci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3
Feb 13 23:01:45 italy kernel: [ 3.777053] ohci_hcd 0000:00:0c.2: irq 11, io mem 0xea005000
Feb 13 23:01:45 italy kernel: [ 3.834289] usb usb3: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 3.834421] hub 3-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 3.834495] hub 3-0:1.0: 2 ports detected
Feb 13 23:01:45 italy kernel: [ 3.920084] usb 1-1: new full speed USB device using ohci_hcd and address 2
Feb 13 23:01:45 italy kernel: [ 3.936333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 13 23:01:45 italy kernel: [ 3.936400] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 3.936460] usb usb3: Product: OHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.936509] usb usb3: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 13 23:01:45 italy kernel: [ 3.936559] usb usb3: SerialNumber: 0000:00:0c.2
Feb 13 23:01:45 italy kernel: [ 3.937621] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Feb 13 23:01:45 italy kernel: [ 3.937676] ACPI: PCI Interrupt 0000:00:0c.3[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 3.937824] ehci_hcd 0000:00:0c.3: EHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 3.937942] ehci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 4
Feb 13 23:01:45 italy kernel: [ 3.938223] USB Universal Host Controller Interface driver v3.0
Feb 13 23:01:45 italy kernel: [ 3.963145] ehci_hcd 0000:00:0c.3: debug port 1
Feb 13 23:01:45 italy kernel: [ 3.963231] ehci_hcd 0000:00:0c.3: irq 10, io mem 0xea006000
Feb 13 23:01:45 italy kernel: [ 4.079155] Uniform Multi-Platform E-IDE driver
Feb 13 23:01:45 italy kernel: [ 4.079221] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 13 23:01:45 italy kernel: [ 4.120098] ehci_hcd 0000:00:0c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 13 23:01:45 italy kernel: [ 4.120372] usb usb4: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 4.120494] hub 4-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 4.120565] hub 4-0:1.0: 6 ports detected
Feb 13 23:01:45 italy kernel: [ 4.224323] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Feb 13 23:01:45 italy kernel: [ 4.224390] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 4.224450] usb usb4: Product: EHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.224498] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 13 23:01:45 italy kernel: [ 4.224548] usb usb4: SerialNumber: 0000:00:0c.3
Feb 13 23:01:45 italy kernel: [ 4.224743] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 4.224893] ehci_hcd 0000:00:10.3: EHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.224997] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Feb 13 23:01:45 italy kernel: [ 4.225135] ehci_hcd 0000:00:10.3: irq 11, io mem 0xea007000
Feb 13 23:01:45 italy kernel: [ 4.236071] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 13 23:01:45 italy kernel: [ 4.236350] usb usb5: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 4.236475] hub 5-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 4.236541] hub 5-0:1.0: 6 ports detected
Feb 13 23:01:45 italy kernel: [ 4.340365] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Feb 13 23:01:45 italy kernel: [ 4.340431] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 4.340491] usb usb5: Product: EHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.340540] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 13 23:01:45 italy kernel: [ 4.340590] usb usb5: SerialNumber: 0000:00:10.3
Feb 13 23:01:45 italy kernel: [ 4.341684] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 4.341832] uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.341958] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
Feb 13 23:01:45 italy kernel: [ 4.342052] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d800
Feb 13 23:01:45 italy kernel: [ 4.342311] usb usb6: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 4.342430] hub 6-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 4.342495] hub 6-0:1.0: 2 ports detected
Feb 13 23:01:45 italy kernel: [ 4.444392] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 13 23:01:45 italy kernel: [ 4.444460] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 4.444520] usb usb6: Product: UHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.444569] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 13 23:01:45 italy kernel: [ 4.444619] usb usb6: SerialNumber: 0000:00:10.0
Feb 13 23:01:45 italy kernel: [ 4.444772] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 4.444912] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.445032] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
Feb 13 23:01:45 italy kernel: [ 4.445129] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000dc00
Feb 13 23:01:45 italy kernel: [ 4.445393] usb usb7: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 4.445509] hub 7-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 4.445576] hub 7-0:1.0: 2 ports detected
Feb 13 23:01:45 italy kernel: [ 4.516095] usb 1-1: device not accepting address 2, error -62
Feb 13 23:01:45 italy kernel: [ 4.548356] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 13 23:01:45 italy kernel: [ 4.548423] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 4.548484] usb usb7: Product: UHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.548532] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 13 23:01:45 italy kernel: [ 4.548582] usb usb7: SerialNumber: 0000:00:10.1
Feb 13 23:01:45 italy kernel: [ 4.548727] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 4.548868] uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.548976] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 8
Feb 13 23:01:45 italy kernel: [ 4.549071] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
Feb 13 23:01:45 italy kernel: [ 4.549342] usb usb8: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 4.549458] hub 8-0:1.0: USB hub found
Feb 13 23:01:45 italy kernel: [ 4.549524] hub 8-0:1.0: 2 ports detected
Feb 13 23:01:45 italy kernel: [ 4.572117] hub 1-0:1.0: unable to enumerate USB device on port 1
Feb 13 23:01:45 italy kernel: [ 4.652398] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Feb 13 23:01:45 italy kernel: [ 4.652465] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 13 23:01:45 italy kernel: [ 4.652525] usb usb8: Product: UHCI Host Controller
Feb 13 23:01:45 italy kernel: [ 4.652573] usb usb8: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 13 23:01:45 italy kernel: [ 4.652623] usb usb8: SerialNumber: 0000:00:10.2
Feb 13 23:01:45 italy kernel: [ 4.657682] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
Feb 13 23:01:45 italy kernel: [ 4.657800] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 4.657927] VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 10
Feb 13 23:01:45 italy kernel: [ 4.658008] VP_IDE: not 100% native mode: will probe irqs later
Feb 13 23:01:45 italy kernel: [ 4.658094] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Feb 13 23:01:45 italy kernel: [ 4.658169] ide0: BM-DMA at 0xe400-0xe407
Feb 13 23:01:45 italy kernel: [ 4.658227] ide1: BM-DMA at 0xe408-0xe40f
Feb 13 23:01:45 italy kernel: [ 4.658277] Probing IDE interface ide0...
Feb 13 23:01:45 italy kernel: [ 5.068077] usb 4-1: new high speed USB device using ehci_hcd and address 2
Feb 13 23:01:45 italy kernel: [ 5.068374] Marking TSC unstable due to: TSC halts in idle.
Feb 13 23:01:45 italy kernel: [ 5.072290] hda: Maxtor 6B200P0, ATA DISK drive
Feb 13 23:01:45 italy kernel: [ 5.124236] hub 4-0:1.0: unable to enumerate USB device on port 1
Feb 13 23:01:45 italy kernel: [ 5.376047] usb 4-5: new high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 5.510708] usb 4-5: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 5.512140] usb 4-5: New USB device found, idVendor=059f, idProduct=0951
Feb 13 23:01:45 italy kernel: [ 5.512206] usb 4-5: New USB device strings: Mfr=10, Product=11, SerialNumber=5
Feb 13 23:01:45 italy kernel: [ 5.512266] usb 4-5: Product: LaCie Hard Drive USB
Feb 13 23:01:45 italy kernel: [ 5.512329] usb 4-5: Manufacturer: LaCie SA
Feb 13 23:01:45 italy kernel: [ 5.512375] usb 4-5: SerialNumber: 031D703971FF
Feb 13 23:01:45 italy kernel: [ 5.586282] SCSI subsystem initialized
Feb 13 23:01:45 italy kernel: [ 5.595318] Initializing USB Mass Storage driver...
Feb 13 23:01:45 italy kernel: [ 5.752138] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 13 23:01:45 italy kernel: [ 5.753674] hda: UDMA/133 mode selected
Feb 13 23:01:45 italy kernel: [ 5.755877] Probing IDE interface ide1...
Feb 13 23:01:45 italy kernel: [ 6.288272] scsi0 : SCSI emulation for USB Mass Storage devices
Feb 13 23:01:45 italy kernel: [ 6.288930] usb-storage: device found at 3
Feb 13 23:01:45 italy kernel: [ 6.288937] usb-storage: waiting for device to settle before scanning
Feb 13 23:01:45 italy kernel: [ 6.416103] usbcore: registered new interface driver usb-storage
Feb 13 23:01:45 italy kernel: [ 6.416162] USB Mass Storage support registered.
Feb 13 23:01:45 italy kernel: [ 6.720047] usb 1-1: new full speed USB device using ohci_hcd and address 4
Feb 13 23:01:45 italy kernel: [ 6.900142] hdd: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive
Feb 13 23:01:45 italy kernel: [ 6.945717] usb 1-1: not running at top speed; connect to a high speed hub
Feb 13 23:01:45 italy kernel: [ 6.956146] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 13 23:01:45 italy kernel: [ 6.956433] hdd: UDMA/66 mode selected
Feb 13 23:01:45 italy kernel: [ 6.956777] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 13 23:01:45 italy kernel: [ 6.979062] ide1 at 0x170-0x177,0x376 on irq 15
Feb 13 23:01:45 italy kernel: [ 6.984950] No dock devices found.
Feb 13 23:01:45 italy kernel: [ 7.004737] libata version 3.00 loaded.
Feb 13 23:01:45 italy kernel: [ 7.058049] usb 1-1: configuration #1 chosen from 1 choice
Feb 13 23:01:45 italy kernel: [ 7.062152] scsi1 : SCSI emulation for USB Mass Storage devices
Feb 13 23:01:45 italy kernel: [ 7.062590] usb 1-1: New USB device found, idVendor=07ab, idProduct=fcfe
Feb 13 23:01:45 italy kernel: [ 7.062646] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 13 23:01:45 italy kernel: [ 7.062700] usb 1-1: Product: Freecom Hard Drive
Feb 13 23:01:45 italy kernel: [ 7.062747] usb 1-1: Manufacturer: Freecom
Feb 13 23:01:45 italy kernel: [ 7.062793] usb 1-1: SerialNumber: 01860D8900920
Feb 13 23:01:45 italy kernel: [ 7.062888] usb-storage: device found at 4
Feb 13 23:01:45 italy kernel: [ 7.062893] usb-storage: waiting for device to settle before scanning
Feb 13 23:01:45 italy kernel: [ 7.091316] hda: max request size: 512KiB
Feb 13 23:01:45 italy kernel: [ 7.097413] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63
Feb 13 23:01:45 italy kernel: [ 7.103061] hda: cache flushes supported
Feb 13 23:01:45 italy kernel: [ 7.103230] hda: hda1 hda2 < hda5 >
Feb 13 23:01:45 italy kernel: [ 7.126322] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Feb 13 23:01:45 italy kernel: [ 7.126563] Uniform CD-ROM driver Revision: 3.20
Feb 13 23:01:45 italy kernel: [ 7.417735] device-mapper: uevent: version 1.0.3
Feb 13 23:01:45 italy kernel: [ 7.420646] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Feb 13 23:01:45 italy kernel: [ 11.288982] usb-storage: device scan complete
Feb 13 23:01:45 italy kernel: [ 11.378129] scsi 0:0:0:0: Direct-Access SAMSUNG HD500LJ PQ: 0 ANSI: 2 CCS
Feb 13 23:01:45 italy kernel: [ 11.418006] Driver 'sd' needs updating - please use bus_type methods
Feb 13 23:01:45 italy kernel: [ 11.419965] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 13 23:01:45 italy kernel: [ 11.421082] sd 0:0:0:0: [sda] Write Protect is off
Feb 13 23:01:45 italy kernel: [ 11.421095] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 13 23:01:45 italy kernel: [ 11.421101] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 13 23:01:45 italy kernel: [ 11.423343] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 13 23:01:45 italy kernel: [ 11.424444] sd 0:0:0:0: [sda] Write Protect is off
Feb 13 23:01:45 italy kernel: [ 11.424456] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 13 23:01:45 italy kernel: [ 11.424462] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 13 23:01:45 italy kernel: [ 11.424473] sda: sda1
Feb 13 23:01:45 italy kernel: [ 11.425993] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 13 23:01:45 italy kernel: [ 11.588053] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 11.876052] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 12.063326] usb-storage: device scan complete
Feb 13 23:01:45 italy kernel: [ 12.099082] scsi 1:0:0:0: Direct-Access SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 0
Feb 13 23:01:45 italy kernel: [ 12.110318] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 13 23:01:45 italy kernel: [ 12.124067] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 12.124302] sd 1:0:0:0: [sdb] Write Protect is off
Feb 13 23:01:45 italy kernel: [ 12.124311] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 13 23:01:45 italy kernel: [ 12.124318] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 13 23:01:45 italy kernel: [ 12.135273] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 13 23:01:45 italy kernel: [ 12.149017] sd 1:0:0:0: [sdb] Write Protect is off
Feb 13 23:01:45 italy kernel: [ 12.149017] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 13 23:01:45 italy kernel: [ 12.149017] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 13 23:01:45 italy kernel: [ 12.149017] sdb:<6>usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 17.486424] PM: Starting manual resume from disk
Feb 13 23:01:45 italy kernel: [ 17.530843] kjournald starting. Commit interval 5 seconds
Feb 13 23:01:45 italy kernel: [ 17.530953] EXT3-fs: mounted filesystem with ordered data mode.
Feb 13 23:01:45 italy kernel: [ 19.780834] sdb1
Feb 13 23:01:45 italy kernel: [ 19.781173] sd 1:0:0:0: [sdb] Attached SCSI disk
Feb 13 23:01:45 italy kernel: [ 20.171487] udevd version 125 started
Feb 13 23:01:45 italy kernel: [ 21.263358] hda: UDMA/133 mode selected
Feb 13 23:01:45 italy kernel: [ 21.265063] hdd: UDMA/66 mode selected
Feb 13 23:01:45 italy kernel: [ 21.588110] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 23.678182] Linux agpgart interface v0.103
Feb 13 23:01:45 italy kernel: [ 23.712414] agpgart: Detected VIA KT266/KY266x/KT333 chipset
Feb 13 23:01:45 italy kernel: [ 23.723181] agpgart: AGP aperture is 128M @ 0xd0000000
Feb 13 23:01:45 italy kernel: [ 23.733180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 13 23:01:45 italy kernel: [ 23.740776] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 13 23:01:45 italy kernel: [ 24.205032] Linux video capture interface: v2.00
Feb 13 23:01:45 italy kernel: [ 24.397610] bttv: driver version 0.9.17 loaded
Feb 13 23:01:45 italy kernel: [ 24.397672] bttv: using 8 buffers with 2080k (520 pages) each for capture
Feb 13 23:01:45 italy kernel: [ 24.397814] bttv: Bt8xx card found (0).
Feb 13 23:01:45 italy kernel: [ 24.397897] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 24.398032] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xea000000
Feb 13 23:01:45 italy kernel: [ 24.405935] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Feb 13 23:01:45 italy kernel: [ 24.406000] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Feb 13 23:01:45 italy kernel: [ 24.406096] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Feb 13 23:01:45 italy kernel: [ 24.408589] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Feb 13 23:01:45 italy kernel: [ 24.436205] tveeprom 0-0050: Hauppauge model 44801, rev D182, serial# 2772248
Feb 13 23:01:45 italy kernel: [ 24.436262] tveeprom 0-0050: tuner model is LG TAPC H791F (idx 82, type 39)
Feb 13 23:01:45 italy kernel: [ 24.436318] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
Feb 13 23:01:45 italy kernel: [ 24.436370] tveeprom 0-0050: audio processor is None (idx 0)
Feb 13 23:01:45 italy kernel: [ 24.436420] tveeprom 0-0050: has no radio
Feb 13 23:01:45 italy kernel: [ 24.436466] bttv0: Hauppauge eeprom indicates model#44801
Feb 13 23:01:45 italy kernel: [ 24.436516] bttv0: tuner type=39
Feb 13 23:01:45 italy kernel: [ 24.436563] bttv0: i2c: checking for MSP34xx @ 0x80... not found
Feb 13 23:01:45 italy kernel: [ 25.039949] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 13 23:01:45 italy kernel: [ 25.055236] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 13 23:01:45 italy kernel: [ 25.143632] input: Power Button (FF) as /class/input/input1
Feb 13 23:01:45 italy kernel: [ 25.178853] ACPI: Power Button (FF) [PWRF]
Feb 13 23:01:45 italy kernel: [ 25.179078] input: Power Button (CM) as /class/input/input2
Feb 13 23:01:45 italy kernel: [ 25.209317] ACPI: Power Button (CM) [PWRB]
Feb 13 23:01:45 italy kernel: [ 25.209532] input: Sleep Button (CM) as /class/input/input3
Feb 13 23:01:45 italy kernel: [ 25.236000] ACPI: Sleep Button (CM) [SLPB]
Feb 13 23:01:45 italy kernel: [ 25.534109] BUG: unable to handle kernel paging request at 49404ddc
Feb 13 23:01:45 italy kernel: [ 25.534238] IP: [<c0163b5f>] handle_mm_fault+0xe3/0x690
Feb 13 23:01:45 italy kernel: [ 25.534334] *pde = 00000000
Feb 13 23:01:45 italy kernel: [ 25.534410] Oops: 0000 [#1] SMP
Feb 13 23:01:45 italy kernel: [ 25.534512] Modules linked in: snd_seq tvaudio button snd_timer snd_seq_device snd bttv(+) videodev v4l1_compat firmware_class ir_common soundcore compat_ioctl32 i2c_algo_bit snd_page_alloc v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom i2c_core shpchp pci_hotplug via_agp agpgart evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc sd_mod dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom ide_disk ata_generic libata dock usb_storage scsi_mod via82cxxx ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 13 23:01:45 italy kernel: [ 25.536016]
Feb 13 23:01:45 italy kernel: [ 25.536016] Pid: 1673, comm: modprobe Not tainted (2.6.26-1-686 #1)
Feb 13 23:01:45 italy kernel: [ 25.536016] EIP: 0060:[<c0163b5f>] EFLAGS: 00010202 CPU: 0
Feb 13 23:01:45 italy kernel: [ 25.536016] EIP is at handle_mm_fault+0xe3/0x690
Feb 13 23:01:45 italy kernel: [ 25.536016] EAX: 49404000 EBX: 01128080 ECX: 00000ddc EDX: ef71e000
Feb 13 23:01:45 italy kernel: [ 25.536016] ESI: c1000000 EDI: 49404ddc EBP: edcc0f40 ESP: ef52bf10
Feb 13 23:01:45 italy kernel: [ 25.536016] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Feb 13 23:01:45 italy kernel: [ 25.536016] Process modprobe (pid: 1673, ti=ef52a000 task=edcc0f40 task.ti=ef52a000)
Feb 13 23:01:45 italy kernel: [ 25.536016] Stack: 005ee320 b7f3d000 00000000 b7f772a0 ef716a04 edd2c5e0 00000ddc f096f000
Feb 13 23:01:45 italy kernel: [ 25.536016] c03b85e0 fffffff4 00000001 00000000 000b7f3d 00000001 ef716c14 ef716c1c
Feb 13 23:01:45 italy kernel: [ 25.536016] ef71695c 00000073 00000000 00000001 b7f3d000 c0166dc0 00000000 ef716a04
Feb 13 23:01:45 italy kernel: [ 25.536016] Call Trace:
Feb 13 23:01:45 italy kernel: [ 25.536016] [<f096f000>] agp_copy_info+0xa0/0xc2 [agpgart]
Feb 13 23:01:45 italy kernel: [ 25.536016] [<c0166dc0>] do_mmap_pgoff+0x266/0x2b9
Feb 13 23:01:45 italy kernel: [ 25.536016] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 13 23:01:45 italy kernel: [ 25.536016] [<c0106a2a>] sys_mmap2+0x62/0xa0
Feb 13 23:01:45 italy kernel: [ 25.536016] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 13 23:01:45 italy kernel: [ 25.536016] [<c02b980a>] error_code+0x72/0x78
Feb 13 23:01:45 italy kernel: [ 25.536016] =======================
Feb 13 23:01:45 italy kernel: [ 25.536016] Code: 89 c3 c1 eb 0c c1 e3 05 8d 04 1e e8 79 d7 ff ff 8b 4c 24 0c c1 e9 0a 81 e1 fc 0f 00 00 89 cf 01 c7 89 4c 24 18 0f 84 9e 05 00 00 <8b> 1f f6 c3 81 0f 85 cd 04 00 00 85 db 0f 85 78 01 00 00 8b 54
Feb 13 23:01:45 italy kernel: [ 25.536016] EIP: [<c0163b5f>] handle_mm_fault+0xe3/0x690 SS:ESP 0068:ef52bf10
Feb 13 23:01:45 italy kernel: [ 25.540713] ---[ end trace 0eeaa552a8ccfeb9 ]---
Feb 13 23:01:45 italy kernel: [ 25.690579] tuner' 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
Feb 13 23:01:45 italy kernel: [ 26.234690] tuner-simple 0-0061: creating new instance
Feb 13 23:01:45 italy kernel: [ 26.234755] tuner-simple 0-0061: type set to 39 (LG NTSC (newer TAPC series))
Feb 13 23:01:45 italy kernel: [ 26.243885] bttv0: registered device video0
Feb 13 23:01:45 italy kernel: [ 26.243975] bttv0: registered device vbi0
Feb 13 23:01:45 italy kernel: [ 26.244101] bttv0: PLL: 28636363 => 35468950 .. ok
Feb 13 23:01:45 italy kernel: [ 27.095915] input: PC Speaker as /class/input/input4
Feb 13 23:01:45 italy kernel: [ 27.655600] NET: Registered protocol family 23
Feb 13 23:01:45 italy kernel: [ 27.911851] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
Feb 13 23:01:45 italy kernel: [ 27.942819] parport_pc 00:0a: reported by Plug and Play ACPI
Feb 13 23:01:45 italy kernel: [ 27.942948] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Feb 13 23:01:45 italy kernel: [ 28.341742] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 29.445326] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 13 23:01:45 italy kernel: [ 29.446172] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
Feb 13 23:01:45 italy kernel: [ 30.589131] hda: UDMA/133 mode selected
Feb 13 23:01:45 italy kernel: [ 30.622766] hdd: UDMA/66 mode selected
Feb 13 23:01:45 italy kernel: [ 31.420720] EXT3 FS on dm-1, internal journal
Feb 13 23:01:45 italy kernel: [ 31.850560] loop: module loaded
Feb 13 23:01:45 italy kernel: [ 31.946221] [drm] Initialized drm 1.1.0 20060810
Feb 13 23:01:45 italy kernel: [ 31.989704] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 13 23:01:45 italy kernel: [ 31.990001] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Feb 13 23:01:45 italy kernel: [ 46.886921] kjournald starting. Commit interval 5 seconds
Feb 13 23:01:45 italy kernel: [ 46.904910] EXT3 FS on hda1, internal journal
Feb 13 23:01:45 italy kernel: [ 46.904993] EXT3-fs: mounted filesystem with ordered data mode.
Feb 13 23:01:45 italy kernel: [ 46.954556] kjournald starting. Commit interval 5 seconds
Feb 13 23:01:45 italy kernel: [ 46.967584] EXT3 FS on dm-3, internal journal
Feb 13 23:01:45 italy kernel: [ 46.967584] EXT3-fs: mounted filesystem with ordered data mode.
Feb 13 23:01:45 italy kernel: [ 47.088049] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 47.344045] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 47.592045] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 47.840054] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 48.092044] usb 4-5: reset high speed USB device using ehci_hcd and address 3
Feb 13 23:01:45 italy kernel: [ 48.231811] kjournald starting. Commit interval 5 seconds
Feb 13 23:01:45 italy kernel: [ 48.231887] EXT3-fs: mounted filesystem with ordered data mode.
Feb 13 23:01:45 italy kernel: [ 48.283369] Adding 2330616k swap on /dev/mapper/italy-swap_1. Priority:-1 extents:1 across:2330616k
Feb 13 23:01:45 italy kernel: [ 50.188285] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Feb 14 15:29:46 italy kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Feb 14 15:29:46 italy kernel: [ 0.000000] Initializing cgroup subsys cpuset
Feb 14 15:29:46 italy kernel: [ 0.000000] Initializing cgroup subsys cpu
Feb 14 15:29:46 italy kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
Feb 14 15:29:46 italy kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb 14 15:29:46 italy kernel: [ 0.000000] 0MB HIGHMEM available.
Feb 14 15:29:46 italy kernel: [ 0.000000] 767MB LOWMEM available.
Feb 14 15:29:46 italy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Feb 14 15:29:46 italy kernel: [ 0.000000] Zone PFN ranges:
Feb 14 15:29:46 italy kernel: [ 0.000000] DMA 0 -> 4096
Feb 14 15:29:46 italy kernel: [ 0.000000] Normal 4096 -> 196592
Feb 14 15:29:46 italy kernel: [ 0.000000] HighMem 196592 -> 196592
Feb 14 15:29:46 italy kernel: [ 0.000000] Movable zone start PFN for each node
Feb 14 15:29:46 italy kernel: [ 0.000000] early_node_map[1] active PFN ranges
Feb 14 15:29:46 italy kernel: [ 0.000000] 0: 0 -> 196592
Feb 14 15:29:46 italy kernel: [ 0.000000] On node 0 totalpages: 196592
Feb 14 15:29:46 italy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Feb 14 15:29:46 italy kernel: [ 0.000000] DMA zone: 0 pages reserved
Feb 14 15:29:46 italy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Feb 14 15:29:46 italy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Feb 14 15:29:46 italy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Feb 14 15:29:46 italy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Feb 14 15:29:46 italy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Feb 14 15:29:46 italy kernel: [ 0.000000] DMI 2.2 present.
Feb 14 15:29:46 italy kernel: [ 0.000000] ACPI: RSDP 000F62E0, 0014 (r0 VIA694)
Feb 14 15:29:46 italy kernel: [ 0.000000] ACPI: RSDT 2FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 14 15:29:46 italy kernel: [ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Feb 14 15:29:46 italy kernel: [ 0.000000] ACPI: DSDT 2FFF30C0, 3316 (r1 VIA694 AWRDACPI 1000 MSFT 100000E)
Feb 14 15:29:46 italy kernel: [ 0.000000] ACPI: FACS 2FFF0000, 0040
Feb 14 15:29:46 italy kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Feb 14 15:29:46 italy kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
Feb 14 15:29:46 italy kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 14 15:29:46 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Feb 14 15:29:46 italy kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Feb 14 15:29:46 italy kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
Feb 14 15:29:46 italy kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Feb 14 15:29:46 italy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Feb 14 15:29:46 italy kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056
Feb 14 15:29:46 italy kernel: [ 0.000000] Kernel command line: root=/dev/mapper/italy-root ro
Feb 14 15:29:46 italy kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Feb 14 15:29:46 italy kernel: [ 0.000000] mapped APIC to ffffb000 (0160f000)
Feb 14 15:29:46 italy kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Feb 14 15:29:46 italy kernel: [ 0.000000] Initializing CPU#0
Feb 14 15:29:46 italy kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Feb 14 15:29:46 italy kernel: [ 0.000000] Detected 930.689 MHz processor.
Feb 14 15:29:46 italy kernel: [ 0.004000] Console: colour VGA+ 80x25
Feb 14 15:29:46 italy kernel: [ 0.004000] console [tty0] enabled
Feb 14 15:29:46 italy kernel: [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Feb 14 15:29:46 italy kernel: [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 14 15:29:46 italy kernel: [ 0.004000] Memory: 768324k/786368k available (1769k kernel code, 17452k reserved, 752k data, 244k init, 0k highmem)
Feb 14 15:29:46 italy kernel: [ 0.004000] virtual kernel memory layout:
Feb 14 15:29:46 italy kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Feb 14 15:29:46 italy kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 14 15:29:46 italy kernel: [ 0.004000] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
Feb 14 15:29:46 italy kernel: [ 0.004000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
Feb 14 15:29:46 italy kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Feb 14 15:29:46 italy kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Feb 14 15:29:46 italy kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Feb 14 15:29:46 italy kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Feb 14 15:29:46 italy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Feb 14 15:29:46 italy kernel: [ 0.084276] Calibrating delay using timer specific routine.. 1863.86 BogoMIPS (lpj=3727739)
Feb 14 15:29:46 italy kernel: [ 0.084444] Security Framework initialized
Feb 14 15:29:46 italy kernel: [ 0.084501] SELinux: Disabled at boot.
Feb 14 15:29:46 italy kernel: [ 0.084551] Capability LSM initialized
Feb 14 15:29:46 italy kernel: [ 0.084627] Mount-cache hash table entries: 512
Feb 14 15:29:46 italy kernel: [ 0.084979] Initializing cgroup subsys ns
Feb 14 15:29:46 italy kernel: [ 0.085031] Initializing cgroup subsys cpuacct
Feb 14 15:29:46 italy kernel: [ 0.085081] Initializing cgroup subsys devices
Feb 14 15:29:46 italy kernel: [ 0.085163] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 14 15:29:46 italy kernel: [ 0.085218] CPU: L2 Cache: 256K (64 bytes/line)
Feb 14 15:29:46 italy kernel: [ 0.085269] Intel machine check architecture supported.
Feb 14 15:29:46 italy kernel: [ 0.085320] Intel machine check reporting enabled on CPU#0.
Feb 14 15:29:46 italy kernel: [ 0.085393] Checking 'hlt' instruction... OK.
Feb 14 15:29:46 italy kernel: [ 0.100367] SMP alternatives: switching to UP code
Feb 14 15:29:46 italy kernel: [ 0.114487] Freeing SMP alternatives: 16k freed
Feb 14 15:29:46 italy kernel: [ 0.114545] ACPI: Core revision 20080321
Feb 14 15:29:46 italy kernel: [ 0.123942] ACPI: setting ELCR to 0200 (from 0e00)
Feb 14 15:29:46 italy kernel: [ 0.128008] weird, boot CPU (#0) not listedby the BIOS.
Feb 14 15:29:46 italy kernel: [ 0.128008] SMP motherboard not detected.
Feb 14 15:29:46 italy kernel: [ 0.128008] Local APIC not detected. Using dummy APIC emulation.
Feb 14 15:29:46 italy kernel: [ 0.128008] SMP disabled
Feb 14 15:29:46 italy kernel: [ 0.128008] Brought up 1 CPUs
Feb 14 15:29:46 italy kernel: [ 0.128008] Total of 1 processors activated (1863.86 BogoMIPS).
Feb 14 15:29:46 italy kernel: [ 0.128008] CPU0 attaching sched-domain:
Feb 14 15:29:46 italy kernel: [ 0.128008] domain 0: span 0
Feb 14 15:29:46 italy kernel: [ 0.128008] groups: 0
Feb 14 15:29:46 italy kernel: [ 0.128008] net_namespace: 660 bytes
Feb 14 15:29:46 italy kernel: [ 0.128008] Booting paravirtualized kernel on bare hardware
Feb 14 15:29:46 italy kernel: [ 0.128008] NET: Registered protocol family 16
Feb 14 15:29:46 italy kernel: [ 0.128008] ACPI: bus type pci registered
Feb 14 15:29:46 italy kernel: [ 0.130376] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
Feb 14 15:29:46 italy kernel: [ 0.130430] PCI: Using configuration type 1 for base access
Feb 14 15:29:46 italy kernel: [ 0.130501] Setting up standard PCI resources
Feb 14 15:29:46 italy kernel: [ 0.136672] ACPI: EC: Look up EC in DSDT
Feb 14 15:29:46 italy kernel: [ 0.144975] ACPI: Interpreter enabled
Feb 14 15:29:46 italy kernel: [ 0.145033] ACPI: (supports S0 S1 S4 S5)
Feb 14 15:29:46 italy kernel: [ 0.145220] ACPI: Using PIC for interrupt routing
Feb 14 15:29:46 italy kernel: [ 0.154073] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 14 15:29:46 italy kernel: [ 0.155200] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
Feb 14 15:29:46 italy kernel: [ 0.155258] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
Feb 14 15:29:46 italy kernel: [ 0.155576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 14 15:29:46 italy kernel: [ 0.199842] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 14 15:29:46 italy kernel: [ 0.200623] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Feb 14 15:29:46 italy kernel: [ 0.201381] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 14 15:29:46 italy kernel: [ 0.202134] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 14 15:29:46 italy kernel: [ 0.202874] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 14 15:29:46 italy kernel: [ 0.203002] pnp: PnP ACPI init
Feb 14 15:29:46 italy kernel: [ 0.203063] ACPI: bus type pnp registered
Feb 14 15:29:46 italy kernel: [ 0.209826] pnp: PnP ACPI: found 13 devices
Feb 14 15:29:46 italy kernel: [ 0.209883] ACPI: ACPI bus type pnp unregistered
Feb 14 15:29:46 italy kernel: [ 0.209936] PnPBIOS: Disabled by ACPI PNP
Feb 14 15:29:46 italy kernel: [ 0.210651] PCI: Using ACPI for IRQ routing
Feb 14 15:29:46 italy kernel: [ 0.211172] ACPI: RTC can wake from S4
Feb 14 15:29:46 italy kernel: [ 0.211284] system 00:00: iomem range 0xcd000-0xcffff has been reserved
Feb 14 15:29:46 italy kernel: [ 0.211340] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211396] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211450] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211505] system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211566] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211628] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211681] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
Feb 14 15:29:46 italy kernel: [ 0.211743] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Feb 14 15:29:46 italy kernel: [ 0.211797] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
Feb 14 15:29:46 italy kernel: [ 0.211864] system 00:02: ioport range 0x4000-0x407f has been reserved
Feb 14 15:29:46 italy kernel: [ 0.211918] system 00:02: ioport range 0x5000-0x500f has been reserved
Feb 14 15:29:46 italy kernel: [ 0.211993] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Feb 14 15:29:46 italy kernel: [ 0.212072] system 00:03: ioport range 0x800-0x805 has been reserved
Feb 14 15:29:46 italy kernel: [ 0.212125] system 00:03: ioport range 0x290-0x297 has been reserved
Feb 14 15:29:46 italy kernel: [ 0.243149] PCI: Bridge: 0000:00:01.0
Feb 14 15:29:46 italy kernel: [ 0.243198] IO window: c000-cfff
Feb 14 15:29:46 italy kernel: [ 0.243247] MEM window: 0xe8000000-0xe9ffffff
Feb 14 15:29:46 italy kernel: [ 0.243297] PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
Feb 14 15:29:46 italy kernel: [ 0.243370] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 14 15:29:46 italy kernel: [ 0.243417] NET: Registered protocol family 2
Feb 14 15:29:46 italy kernel: [ 0.243668] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 14 15:29:46 italy kernel: [ 0.244531] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 14 15:29:46 italy kernel: [ 0.249472] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Feb 14 15:29:46 italy kernel: [ 0.252014] TCP: Hash tables configured (established 131072 bind 65536)
Feb 14 15:29:46 italy kernel: [ 0.252098] TCP reno registered
Feb 14 15:29:46 italy kernel: [ 0.252429] NET: Registered protocol family 1
Feb 14 15:29:46 italy kernel: [ 0.252766] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
Feb 14 15:29:46 italy kernel: [ 0.828773] it is
Feb 14 15:29:46 italy kernel: [ 1.515765] Freeing initrd memory: 7199k freed
Feb 14 15:29:46 italy kernel: [ 1.517445] audit: initializing netlink socket (disabled)
Feb 14 15:29:46 italy kernel: [ 1.517529] type=2000 audit(1234625333.516:1): initialized
Feb 14 15:29:46 italy kernel: [ 1.517855] Total HugeTLB memory allocated, 0
Feb 14 15:29:46 italy kernel: [ 1.518073] VFS: Disk quotas dquot_6.5.1
Feb 14 15:29:46 italy kernel: [ 1.518185] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 14 15:29:46 italy kernel: [ 1.518315] msgmni has been set to 1515
Feb 14 15:29:46 italy kernel: [ 1.518594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 14 15:29:46 italy kernel: [ 1.518659] io scheduler noop registered
Feb 14 15:29:46 italy kernel: [ 1.518706] io scheduler anticipatory registered
Feb 14 15:29:46 italy kernel: [ 1.518753] io scheduler deadline registered
Feb 14 15:29:46 italy kernel: [ 1.518813] io scheduler cfq registered (default)
Feb 14 15:29:46 italy kernel: [ 1.518881] PCI: VIA PCI bridge detected.Disabling DAC.
Feb 14 15:29:46 italy kernel: [ 1.519107] pci 0000:01:00.0: Boot video device
Feb 14 15:29:46 italy kernel: [ 1.519915] isapnp: Scanning for PnP cards...
Feb 14 15:29:46 italy kernel: [ 1.874049] isapnp: No Plug & Play device found
Feb 14 15:29:46 italy kernel: [ 1.881306] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 14 15:29:46 italy kernel: [ 1.881576] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 14 15:29:46 italy kernel: [ 1.881805] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 14 15:29:46 italy kernel: [ 1.882538] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 14 15:29:46 italy kernel: [ 1.882859] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 14 15:29:46 italy kernel: [ 1.886555] brd: module loaded
Feb 14 15:29:46 italy kernel: [ 1.886841] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 14 15:29:46 italy kernel: [ 1.887363] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 14 15:29:46 italy kernel: [ 1.887421] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 14 15:29:46 italy kernel: [ 1.887823] mice: PS/2 mouse device common for all mice
Feb 14 15:29:46 italy kernel: [ 1.888223] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Feb 14 15:29:46 italy kernel: [ 1.888300] rtc0: alarms up to one year, y3k
Feb 14 15:29:46 italy kernel: [ 1.888429] cpuidle: using governor ladder
Feb 14 15:29:46 italy kernel: [ 1.888478] cpuidle: using governor menu
Feb 14 15:29:46 italy kernel: [ 1.888531] No iBFT detected.
Feb 14 15:29:46 italy kernel: [ 1.889624] TCP cubic registered
Feb 14 15:29:46 italy kernel: [ 1.889674] NET: Registered protocol family 17
Feb 14 15:29:46 italy kernel: [ 1.889732] Using IPI No-Shortcut mode
Feb 14 15:29:46 italy kernel: [ 1.890062] registered taskstats version 1
Feb 14 15:29:46 italy kernel: [ 1.890471] rtc_cmos 00:05: setting system clock to 2009-02-14 15:28:55 UTC (1234625335)
Feb 14 15:29:46 italy kernel: [ 1.891117] Freeing unused kernel memory: 244k freed
Feb 14 15:29:46 italy kernel: [ 1.910559] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 14 15:29:46 italy kernel: [ 2.142322] ACPI: PNP0C0B:00 is registered as cooling_device0
Feb 14 15:29:46 italy kernel: [ 2.142400] ACPI: Fan [FAN] (on)
Feb 14 15:29:46 italy kernel: [ 2.156451] ACPI: CPU0 (power states: C1[C1] C2[C2])
Feb 14 15:29:46 italy kernel: [ 2.156709] ACPI: ACPI0007:00 is registered as cooling_device1
Feb 14 15:29:46 italy kernel: [ 2.160893] ACPI: LNXTHERM:01 is registered as thermal_zone0
Feb 14 15:29:46 italy kernel: [ 2.161217] ACPI: Thermal Zone [THRM] (40 C)
Feb 14 15:29:46 italy kernel: [ 3.263550] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 14 15:29:46 italy kernel: [ 3.263653] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Feb 14 15:29:46 italy kernel: [ 3.263716] 8139cp 0000:00:0b.0: Try the "8139too" driver instead.
Feb 14 15:29:46 italy kernel: [ 3.294764] 8139too Fast Ethernet driver 0.9.28
Feb 14 15:29:46 italy kernel: [ 3.295724] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Feb 14 15:29:46 italy kernel: [ 3.295778] PCI: setting IRQ 11 as level-triggered
Feb 14 15:29:46 italy kernel: [ 3.295786] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 14 15:29:46 italy kernel: [ 3.296860] eth0: RealTek RTL8139 at 0xd400, 00:02:44:14:3f:2c, IRQ 11
Feb 14 15:29:46 italy kernel: [ 3.296914] eth0: Identified 8139 chip type 'RTL-8139B'
Feb 14 15:29:46 italy kernel: [ 3.813262] usbcore: registered new interface driver usbfs
Feb 14 15:29:46 italy kernel: [ 3.813390] usbcore: registered new interface driver hub
Feb 14 15:29:46 italy kernel: [ 3.813512] usbcore: registered new device driver usb
Feb 14 15:29:46 italy kernel: [ 3.827689] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 14 15:29:46 italy kernel: [ 3.828578] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Feb 14 15:29:46 italy kernel: [ 3.828640] PCI: setting IRQ 10 as level-triggered
Feb 14 15:29:46 italy kernel: [ 3.828648] ACPI: PCI Interrupt 0000:00:0c.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 14 15:29:46 italy kernel: [ 3.828792] ohci_hcd 0000:00:0c.0: OHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 3.829104] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
Feb 14 15:29:46 italy kernel: [ 3.829193] ohci_hcd 0000:00:0c.0: irq 10, io mem 0xea003000
Feb 14 15:29:46 italy kernel: [ 3.888677] usb usb1: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 3.888810] hub 1-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 3.888881] hub 1-0:1.0: 2 ports detected
Feb 14 15:29:46 italy kernel: [ 3.919926] USB Universal Host Controller Interface driver v3.0
Feb 14 15:29:46 italy kernel: [ 4.001615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Feb 14 15:29:46 italy kernel: [ 4.001682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.001742] usb usb1: Product: OHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.001790] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 14 15:29:46 italy kernel: [ 4.001840] usb usb1: SerialNumber: 0000:00:0c.0
Feb 14 15:29:46 italy kernel: [ 4.002825] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Feb 14 15:29:46 italy kernel: [ 4.002880] ACPI: PCI Interrupt 0000:00:0c.1[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 14 15:29:46 italy kernel: [ 4.003023] ohci_hcd 0000:00:0c.1: OHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.003128] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
Feb 14 15:29:46 italy kernel: [ 4.003218] ohci_hcd 0000:00:0c.1: irq 11, io mem 0xea004000
Feb 14 15:29:46 italy kernel: [ 4.058279] usb usb2: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.058408] hub 2-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.058478] hub 2-0:1.0: 2 ports detected
Feb 14 15:29:46 italy kernel: [ 4.062939] Uniform Multi-Platform E-IDE driver
Feb 14 15:29:46 italy kernel: [ 4.063006] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 14 15:29:46 italy kernel: [ 4.160338] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Feb 14 15:29:46 italy kernel: [ 4.160405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.160466] usb usb2: Product: OHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.160514] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 14 15:29:46 italy kernel: [ 4.160565] usb usb2: SerialNumber: 0000:00:0c.1
Feb 14 15:29:46 italy kernel: [ 4.160759] ACPI: PCI Interrupt 0000:00:0c.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 14 15:29:46 italy kernel: [ 4.160912] ohci_hcd 0000:00:0c.2: OHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.161053] ohci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3
Feb 14 15:29:46 italy kernel: [ 4.161140] ohci_hcd 0000:00:0c.2: irq 11, io mem 0xea005000
Feb 14 15:29:46 italy kernel: [ 4.218305] usb usb3: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.218436] hub 3-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.218502] hub 3-0:1.0: 2 ports detected
Feb 14 15:29:46 italy kernel: [ 4.301663] Marking TSC unstable due to: TSC halts in idle.
Feb 14 15:29:46 italy kernel: [ 4.320381] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 14 15:29:46 italy kernel: [ 4.320437] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.320497] usb usb3: Product: OHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.320545] usb usb3: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Feb 14 15:29:46 italy kernel: [ 4.320595] usb usb3: SerialNumber: 0000:00:0c.2
Feb 14 15:29:46 italy kernel: [ 4.321789] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Feb 14 15:29:46 italy kernel: [ 4.321844] ACPI: PCI Interrupt 0000:00:0c.3[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 14 15:29:46 italy kernel: [ 4.321989] ehci_hcd 0000:00:0c.3: EHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.322097] ehci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 4
Feb 14 15:29:46 italy kernel: [ 4.344121] ehci_hcd 0000:00:0c.3: debug port 1
Feb 14 15:29:46 italy kernel: [ 4.344207] ehci_hcd 0000:00:0c.3: irq 10, io mem 0xea006000
Feb 14 15:29:46 italy kernel: [ 4.356120] ehci_hcd 0000:00:0c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 14 15:29:46 italy kernel: [ 4.356425] usb usb4: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.356546] hub 4-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.356616] hub 4-0:1.0: 6 ports detected
Feb 14 15:29:46 italy kernel: [ 4.460317] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Feb 14 15:29:46 italy kernel: [ 4.460383] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.460443] usb usb4: Product: EHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.460492] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 14 15:29:46 italy kernel: [ 4.460542] usb usb4: SerialNumber: 0000:00:0c.3
Feb 14 15:29:46 italy kernel: [ 4.460691] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 14 15:29:46 italy kernel: [ 4.460831] uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.460933] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
Feb 14 15:29:46 italy kernel: [ 4.461026] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d800
Feb 14 15:29:46 italy kernel: [ 4.461282] usb usb5: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.461396] hub 5-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.461460] hub 5-0:1.0: 2 ports detected
Feb 14 15:29:46 italy kernel: [ 4.564363] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 14 15:29:46 italy kernel: [ 4.564430] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.564490] usb usb5: Product: UHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.564538] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 14 15:29:46 italy kernel: [ 4.564588] usb usb5: SerialNumber: 0000:00:10.0
Feb 14 15:29:46 italy kernel: [ 4.564756] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 14 15:29:46 italy kernel: [ 4.564897] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.565002] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
Feb 14 15:29:46 italy kernel: [ 4.565099] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000dc00
Feb 14 15:29:46 italy kernel: [ 4.565364] usb usb6: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.565479] hub 6-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.565543] hub 6-0:1.0: 2 ports detected
Feb 14 15:29:46 italy kernel: [ 4.585621] BUG: unable to handle kernel paging request at baab99cc
Feb 14 15:29:46 italy kernel: [ 4.585746] IP: [<c0163afb>] handle_mm_fault+0x7f/0x690
Feb 14 15:29:46 italy kernel: [ 4.585842] *pde = 00000000
Feb 14 15:29:46 italy kernel: [ 4.585918] Oops: 0000 [#1] SMP
Feb 14 15:29:46 italy kernel: [ 4.586019] Modules linked in: ide_pci_generic(+) ide_core uhci_hcd(+) ehci_hcd(+) ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 14 15:29:46 italy kernel: [ 4.586499]
Feb 14 15:29:46 italy kernel: [ 4.586542] Pid: 731, comm: udevd Not tainted (2.6.26-1-686 #1)
Feb 14 15:29:46 italy kernel: [ 4.586593] EIP: 0060:[<c0163afb>] EFLAGS: 00010287 CPU: 0
Feb 14 15:29:46 italy kernel: [ 4.586646] EIP is at handle_mm_fault+0x7f/0x690
Feb 14 15:29:46 italy kernel: [ 4.586695] EAX: baab99cc EBX: edd554c4 ECX: edd554c4 EDX: cccccccc
Feb 14 15:29:46 italy kernel: [ 4.586747] ESI: edc64680 EDI: ef40e0a0 EBP: edc64680 ESP: eddcff18
Feb 14 15:29:46 italy kernel: [ 4.586799] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 14 15:29:46 italy kernel: [ 4.586850] Process udevd (pid: 731, ti=eddce000 task=edc64680 task.ti=eddce000)
Feb 14 15:29:46 italy kernel: [ 4.586903] Stack: 00000000 edd554c4 edd554c4 eddecd80 00000f40 eddbab7c c03b85e0 baab99cc
Feb 14 15:29:46 italy kernel: [ 4.587225] ef470be0 08054620 ef433000 ef433000 eddce000 0000007b 00000000 00000000
Feb 14 15:29:46 italy kernel: [ 4.587546] 00000000 00000020 ef470be0 00000003 edc3aa70 edd554c4 eddecdb8 b7fd8ddb
Feb 14 15:29:46 italy kernel: [ 4.587866] Call Trace:
Feb 14 15:29:46 italy kernel: [ 4.587950] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 14 15:29:46 italy kernel: [ 4.588034] [<c0172acd>] filp_close+0x4d/0x53
Feb 14 15:29:46 italy kernel: [ 4.588034] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 14 15:29:46 italy kernel: [ 4.588034] [<c02b980a>] error_code+0x72/0x78
Feb 14 15:29:46 italy kernel: [ 4.588034] =======================
Feb 14 15:29:46 italy kernel: [ 4.588034] Code: 8b 44 24 14 83 c4 5c 5b 5e 5f 5d e9 44 9e 00 00 8b 44 24 0c 8b 54 24 14 c1 e8 16 c1 e0 02 89 44 24 1c 8b 52 24 01 d0 89 44 24 1c <8b> 00 e8 56 12 fb ff 90 a8 01 75 19 8b 4c 24 0c 8b 54 24 1c 8b
Feb 14 15:29:46 italy kernel: [ 4.588034] EIP: [<c0163afb>] handle_mm_fault+0x7f/0x690 SS:ESP 0068:eddcff18
Feb 14 15:29:46 italy kernel: [ 4.590435] ---[ end trace 3959a4645d21a6b8 ]---
Feb 14 15:29:46 italy kernel: [ 4.669326] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 14 15:29:46 italy kernel: [ 4.669392] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.669452] usb usb6: Product: UHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.669500] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 14 15:29:46 italy kernel: [ 4.669550] usb usb6: SerialNumber: 0000:00:10.1
Feb 14 15:29:46 italy kernel: [ 4.669702] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Feb 14 15:29:46 italy kernel: [ 4.669841] uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.669945] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
Feb 14 15:29:46 italy kernel: [ 4.670037] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
Feb 14 15:29:46 italy kernel: [ 4.670297] usb usb7: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.670413] hub 7-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.670477] hub 7-0:1.0: 2 ports detected
Feb 14 15:29:46 italy kernel: [ 4.720651] usb 4-5: new high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 4.772721] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 14 15:29:46 italy kernel: [ 4.772777] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.772837] usb usb7: Product: UHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.772885] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Feb 14 15:29:46 italy kernel: [ 4.772935] usb usb7: SerialNumber: 0000:00:10.2
Feb 14 15:29:46 italy kernel: [ 4.773072] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 14 15:29:46 italy kernel: [ 4.773223] ehci_hcd 0000:00:10.3: EHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.773329] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
Feb 14 15:29:46 italy kernel: [ 4.773468] ehci_hcd 0000:00:10.3: irq 11, io mem 0xea007000
Feb 14 15:29:46 italy kernel: [ 4.844334] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 14 15:29:46 italy kernel: [ 4.844574] usb usb8: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.845330] hub 8-0:1.0: USB hub found
Feb 14 15:29:46 italy kernel: [ 4.845404] hub 8-0:1.0: 6 ports detected
Feb 14 15:29:46 italy kernel: [ 4.854964] usb 4-5: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 4.856023] usb 4-5: New USB device found, idVendor=059f, idProduct=0951
Feb 14 15:29:46 italy kernel: [ 4.856023] usb 4-5: New USB device strings: Mfr=10, Product=11, SerialNumber=5
Feb 14 15:29:46 italy kernel: [ 4.856116] usb 4-5: Product: LaCie Hard Drive USB
Feb 14 15:29:46 italy kernel: [ 4.856165] usb 4-5: Manufacturer: LaCie SA
Feb 14 15:29:46 italy kernel: [ 4.856212] usb 4-5: SerialNumber: 031D703971FF
Feb 14 15:29:46 italy kernel: [ 4.948252] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Feb 14 15:29:46 italy kernel: [ 4.948311] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 14 15:29:46 italy kernel: [ 4.948371] usb usb8: Product: EHCI Host Controller
Feb 14 15:29:46 italy kernel: [ 4.948419] usb usb8: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Feb 14 15:29:46 italy kernel: [ 4.948469] usb usb8: SerialNumber: 0000:00:10.3
Feb 14 15:29:46 italy kernel: [ 4.954818] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
Feb 14 15:29:46 italy kernel: [ 4.954936] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 14 15:29:46 italy kernel: [ 4.955064] VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 10
Feb 14 15:29:46 italy kernel: [ 4.955145] VP_IDE: not 100% native mode: will probe irqs later
Feb 14 15:29:46 italy kernel: [ 4.955229] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Feb 14 15:29:46 italy kernel: [ 4.955304] ide0: BM-DMA at 0xe400-0xe407
Feb 14 15:29:46 italy kernel: [ 4.955361] ide1: BM-DMA at 0xe408-0xe40f
Feb 14 15:29:46 italy kernel: [ 4.955411] Probing IDE interface ide0...
Feb 14 15:29:46 italy kernel: [ 5.372201] hda: Maxtor 6B200P0, ATA DISK drive
Feb 14 15:29:46 italy kernel: [ 5.394322] BUG: unable to handle kernel paging request at 01251000
Feb 14 15:29:46 italy kernel: [ 5.394448] IP: [<c0163ae8>] handle_mm_fault+0x6c/0x690
Feb 14 15:29:46 italy kernel: [ 5.394543] *pde = 00000000
Feb 14 15:29:46 italy kernel: [ 5.394620] Oops: 0002 [#2] SMP
Feb 14 15:29:46 italy kernel: [ 5.394721] Modules linked in: via82cxxx(+) ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 14 15:29:46 italy kernel: [ 5.395230]
Feb 14 15:29:46 italy kernel: [ 5.395274] Pid: 784, comm: udevd Tainted: G D (2.6.26-1-686 #1)
Feb 14 15:29:46 italy kernel: [ 5.395327] EIP: 0060:[<c0163ae8>] EFLAGS: 00010246 CPU: 0
Feb 14 15:29:46 italy kernel: [ 5.395380] EIP is at handle_mm_fault+0x6c/0x690
Feb 14 15:29:46 italy kernel: [ 5.395428] EAX: 01251000 EBX: edd55cf8 ECX: edd55cf8 EDX: eddad540
Feb 14 15:29:46 italy kernel: [ 5.395480] ESI: eddad578 EDI: b7e8e270 EBP: edc65b20 ESP: eddeff10
Feb 14 15:29:46 italy kernel: [ 5.395532] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 14 15:29:46 italy kernel: [ 5.395583] Process udevd (pid: 784, ti=eddee000 task=edc65b20 task.ti=eddee000)
Feb 14 15:29:46 italy kernel: [ 5.395636] Stack: c0355c80 00000001 00000000 b7e8e270 edd55cf8 eddad540 00000a34 ede20b7c
Feb 14 15:29:46 italy kernel: [ 5.395957] c03b85e0 c018b8a4 eddeffa0 00000005 bfeda76c 00000002 c15bdd20 c0354e60
Feb 14 15:29:46 italy kernel: [ 5.396022] 00000256 bfedb83c bfedb83c 08c2d0b0 c01771d5 eddea3c0 c01dcd22 edd55cf8
Feb 14 15:29:46 italy kernel: [ 5.396022] Call Trace:
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c018b8a4>] simple_read_from_buffer+0x64/0x8d
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c01771d5>] sys_lstat64+0xf/0x23
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c01dcd22>] _atomic_dec_and_lock+0x2a/0x44
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c0172acd>] filp_close+0x4d/0x53
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 14 15:29:46 italy kernel: [ 5.396022] [<c02b980a>] error_code+0x72/0x78
Feb 14 15:29:46 italy kernel: [ 5.396022] =======================
Feb 14 15:29:46 italy kernel: [ 5.396022] Code: 40 74 20 8b 44 24 08 8b 4c 24 0c 8b 54 24 10 89 44 24 70 8b 44 24 14 83 c4 5c 5b 5e 5f 5d e9 44 9e 00 00 8b 44 24 0c 8b 54 24 14 <c1> e8 16 c1 e0 02 89 44 24 1c 8b 52 24 01 d0 89 44 24 1c 8b 00
Feb 14 15:29:46 italy kernel: [ 5.396022] EIP: [<c0163ae8>] handle_mm_fault+0x6c/0x690 SS:ESP 0068:eddeff10
Feb 14 15:29:46 italy kernel: [ 5.399421] ---[ end trace 3959a4645d21a6b8 ]---
Feb 14 15:29:46 italy kernel: [ 5.503779] SCSI subsystem initialized
Feb 14 15:29:46 italy kernel: [ 5.512753] Initializing USB Mass Storage driver...
Feb 14 15:29:46 italy kernel: [ 5.652288] scsi0 : SCSI emulation for USB Mass Storage devices
Feb 14 15:29:46 italy kernel: [ 5.652996] usbcore: registered new interface driver usb-storage
Feb 14 15:29:46 italy kernel: [ 5.653055] USB Mass Storage support registered.
Feb 14 15:29:46 italy kernel: [ 5.657963] usb-storage: device found at 2
Feb 14 15:29:46 italy kernel: [ 5.658024] usb-storage: waiting for device to settle before scanning
Feb 14 15:29:46 italy kernel: [ 6.052146] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 14 15:29:46 italy kernel: [ 6.053711] hda: UDMA/133 mode selected
Feb 14 15:29:46 italy kernel: [ 6.055266] Probing IDE interface ide1...
Feb 14 15:29:46 italy kernel: [ 7.200142] hdd: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive
Feb 14 15:29:46 italy kernel: [ 7.256117] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Feb 14 15:29:46 italy kernel: [ 7.256439] hdd: UDMA/66 mode selected
Feb 14 15:29:46 italy kernel: [ 7.256778] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 14 15:29:46 italy kernel: [ 7.279200] ide1 at 0x170-0x177,0x376 on irq 15
Feb 14 15:29:46 italy kernel: [ 7.284938] No dock devices found.
Feb 14 15:29:46 italy kernel: [ 7.307888] libata version 3.00 loaded.
Feb 14 15:29:46 italy kernel: [ 7.397859] hda: max request size: 512KiB
Feb 14 15:29:46 italy kernel: [ 7.400666] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63
Feb 14 15:29:46 italy kernel: [ 7.405330] hda: cache flushes supported
Feb 14 15:29:46 italy kernel: [ 7.405488] hda: hda1 hda2 < hda5 >
Feb 14 15:29:46 italy kernel: [ 7.426369] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Feb 14 15:29:46 italy kernel: [ 7.426615] Uniform CD-ROM driver Revision: 3.20
Feb 14 15:29:46 italy kernel: [ 7.667982] device-mapper: uevent: version 1.0.3
Feb 14 15:29:46 italy kernel: [ 7.670897] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Feb 14 15:29:46 italy kernel: [ 10.657009] usb-storage: device scan complete
Feb 14 15:29:46 italy kernel: [ 10.746348] scsi 0:0:0:0: Direct-Access SAMSUNG HD500LJ PQ: 0 ANSI: 2 CCS
Feb 14 15:29:46 italy kernel: [ 10.786252] Driver 'sd' needs updating - please use bus_type methods
Feb 14 15:29:46 italy kernel: [ 10.788138] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 14 15:29:46 italy kernel: [ 10.789241] sd 0:0:0:0: [sda] Write Protect is off
Feb 14 15:29:46 italy kernel: [ 10.789255] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 14 15:29:46 italy kernel: [ 10.789261] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 14 15:29:46 italy kernel: [ 10.791490] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
Feb 14 15:29:46 italy kernel: [ 10.792858] sd 0:0:0:0: [sda] Write Protect is off
Feb 14 15:29:46 italy kernel: [ 10.792870] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
Feb 14 15:29:46 italy kernel: [ 10.792877] sd 0:0:0:0: [sda] Assuming drive cache: write through
Feb 14 15:29:46 italy kernel: [ 10.792885] sda: sda1
Feb 14 15:29:46 italy kernel: [ 10.794343] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 14 15:29:46 italy kernel: [ 10.968055] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 11.212045] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 11.464047] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 11.724053] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 17.764055] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 18.012040] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 18.458217] PM: Starting manual resume from disk
Feb 14 15:29:46 italy kernel: [ 18.500261] EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 14 15:29:46 italy kernel: [ 18.500329] EXT3-fs: write access will be enabled during recovery.
Feb 14 15:29:46 italy kernel: [ 20.944376] kjournald starting. Commit interval 5 seconds
Feb 14 15:29:46 italy kernel: [ 20.944486] EXT3-fs: dm-1: orphan cleanup on readonly fs
Feb 14 15:29:46 italy kernel: [ 20.944547] ext3_orphan_cleanup: deleting unreferenced inode 827568
Feb 14 15:29:46 italy kernel: [ 20.944629] ext3_orphan_cleanup: deleting unreferenced inode 827434
Feb 14 15:29:46 italy kernel: [ 20.944646] ext3_orphan_cleanup: deleting unreferenced inode 827433
Feb 14 15:29:46 italy kernel: [ 20.944661] ext3_orphan_cleanup: deleting unreferenced inode 827432
Feb 14 15:29:46 italy kernel: [ 20.944675] ext3_orphan_cleanup: deleting unreferenced inode 827431
Feb 14 15:29:46 italy kernel: [ 20.944689] ext3_orphan_cleanup: deleting unreferenced inode 827430
Feb 14 15:29:46 italy kernel: [ 20.944701] EXT3-fs: dm-1: 6 orphan inodes deleted
Feb 14 15:29:46 italy kernel: [ 20.944748] EXT3-fs: recovery complete.
Feb 14 15:29:46 italy kernel: [ 20.953503] EXT3-fs: mounted filesystem with ordered data mode.
Feb 14 15:29:46 italy kernel: [ 22.208067] hub 4-0:1.0: unable to enumerate USB device on port 1
Feb 14 15:29:46 italy kernel: [ 22.856074] usb 4-1: new high speed USB device using ehci_hcd and address 4
Feb 14 15:29:46 italy kernel: [ 22.912227] hub 4-0:1.0: unable to enumerate USB device on port 1
Feb 14 15:29:46 italy kernel: [ 23.356069] usb 1-1: new full speed USB device using ohci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 23.580592] usb 1-1: not running at top speed; connect to a high speed hub
Feb 14 15:29:46 italy kernel: [ 23.693289] usb 1-1: configuration #1 chosen from 1 choice
Feb 14 15:29:46 italy kernel: [ 23.697081] scsi1 : SCSI emulation for USB Mass Storage devices
Feb 14 15:29:46 italy kernel: [ 23.697081] usb 1-1: New USB device found, idVendor=07ab, idProduct=fcfe
Feb 14 15:29:46 italy kernel: [ 23.697081] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 14 15:29:46 italy kernel: [ 23.697081] usb 1-1: Product: Freecom Hard Drive
Feb 14 15:29:46 italy kernel: [ 23.697081] usb 1-1: Manufacturer: Freecom
Feb 14 15:29:46 italy kernel: [ 23.697081] usb 1-1: SerialNumber: 01860D8900920
Feb 14 15:29:46 italy kernel: [ 23.697081] usb-storage: device found at 2
Feb 14 15:29:46 italy kernel: [ 23.697081] usb-storage: waiting for device to settle before scanning
Feb 14 15:29:46 italy kernel: [ 24.542808] BUG: unable to handle kernel paging request at 5e5b244b
Feb 14 15:29:46 italy kernel: [ 24.542938] IP: [<5e5b244b>]
Feb 14 15:29:46 italy kernel: [ 24.543014] *pde = 00000000
Feb 14 15:29:46 italy kernel: [ 24.543091] Oops: 0000 [#3] SMP
Feb 14 15:29:46 italy kernel: [ 24.543193] Modules linked in: ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc sd_mod dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod ide_disk cdrom ata_generic libata dock usb_storage scsi_mod via82cxxx ide_pci_generic ide_core uhci_hcd ehci_hcd ohci_hcd usbcore 8139too 8139cp mii thermal processor fan thermal_sys
Feb 14 15:29:46 italy kernel: [ 24.544038]
Feb 14 15:29:46 italy kernel: [ 24.544038] Pid: 1123, comm: grep Tainted: G D (2.6.26-1-686 #1)
Feb 14 15:29:46 italy kernel: [ 24.544038] EIP: 0060:[<5e5b244b>] EFLAGS: 00010286 CPU: 0
Feb 14 15:29:46 italy kernel: [ 24.544038] EIP is at 0x5e5b244b
Feb 14 15:29:46 italy kernel: [ 24.544038] EAX: edcf36c0 EBX: eddbfa58 ECX: eddbfa58 EDX: c03b85e0
Feb 14 15:29:46 italy kernel: [ 24.544038] ESI: edcf36f8 EDI: b7ef0cd0 EBP: ef4e0100 ESP: ef577f74
Feb 14 15:29:46 italy kernel: [ 24.544038] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Feb 14 15:29:46 italy kernel: [ 24.544038] Process grep (pid: 1123, ti=ef576000 task=ef4e0100 task.ti=ef576000)
Feb 14 15:29:46 italy kernel: [ 24.544038] Stack: b7ef0cd0 ef4e0100 c0115b4f 00000000 00000004 ef577fb8 edcf36c0 00000000
Feb 14 15:29:46 italy kernel: [ 24.544038] edcf36c0 099c2000 c0166b52 edcf36f8 bfcc1f0d bfcc0ac4 c01158b4 bfcc08f8
Feb 14 15:29:46 italy kernel: [ 24.544038] c02b980a bfcc1f0d 00000000 080603e0 bfcc0ac4 080603e4 bfcc08f8 bfcc1f0d
Feb 14 15:29:46 italy kernel: [ 24.544038] Call Trace:
Feb 14 15:29:46 italy kernel: [ 24.544038] [<c0115b4f>] do_page_fault+0x29b/0x5b8
Feb 14 15:29:46 italy kernel: [ 24.544038] [<c0166b52>] sys_brk+0xd3/0xdb
Feb 14 15:29:46 italy kernel: [ 24.544038] [<c01158b4>] do_page_fault+0x0/0x5b8
Feb 14 15:29:46 italy kernel: [ 24.544038] [<c02b980a>] error_code+0x72/0x78
Feb 14 15:29:46 italy kernel: [ 24.544038] =======================
Feb 14 15:29:46 italy kernel: [ 24.544038] Code: Bad EIP value.
Feb 14 15:29:46 italy kernel: [ 24.544038] EIP: [<5e5b244b>] 0x5e5b244b SS:ESP 0068:ef577f74
Feb 14 15:29:46 italy kernel: [ 24.546494] ---[ end trace 3959a4645d21a6b8 ]---
Feb 14 15:29:46 italy kernel: [ 25.519208] hda: UDMA/133 mode selected
Feb 14 15:29:46 italy kernel: [ 25.555802] hdd: UDMA/66 mode selected
Feb 14 15:29:46 italy kernel: [ 26.270428] EXT3 FS on dm-1, internal journal
Feb 14 15:29:46 italy kernel: [ 26.683329] loop: module loaded
Feb 14 15:29:46 italy kernel: [ 26.735440] Linux agpgart interface v0.103
Feb 14 15:29:46 italy kernel: [ 26.785750] [drm] Initialized drm 1.1.0 20060810
Feb 14 15:29:46 italy kernel: [ 26.822411] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 14 15:29:46 italy kernel: [ 26.822693] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Feb 14 15:29:46 italy kernel: [ 28.699501] usb-storage: device scan complete
Feb 14 15:29:46 italy kernel: [ 28.735488] scsi 1:0:0:0: Direct-Access SAMSUNG HD400LD WQ10 PQ: 0 ANSI: 0
Feb 14 15:29:46 italy kernel: [ 28.746429] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 14 15:29:46 italy kernel: [ 28.760449] sd 1:0:0:0: [sdb] Write Protect is off
Feb 14 15:29:46 italy kernel: [ 28.760519] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 14 15:29:46 italy kernel: [ 28.760571] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 14 15:29:46 italy kernel: [ 28.771441] sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Feb 14 15:29:46 italy kernel: [ 28.785475] sd 1:0:0:0: [sdb] Write Protect is off
Feb 14 15:29:46 italy kernel: [ 28.785547] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
Feb 14 15:29:46 italy kernel: [ 28.785598] sd 1:0:0:0: [sdb] Assuming drive cache: write through
Feb 14 15:29:46 italy kernel: [ 28.785659] sdb: sdb1
Feb 14 15:29:46 italy kernel: [ 36.363310] sd 1:0:0:0: [sdb] Attached SCSI disk
Feb 14 15:29:46 italy kernel: [ 50.220759] kjournald starting. Commit interval 5 seconds
Feb 14 15:29:46 italy kernel: [ 50.238858] EXT3 FS on hda1, internal journal
Feb 14 15:29:46 italy kernel: [ 50.238858] EXT3-fs: mounted filesystem with ordered data mode.
Feb 14 15:29:46 italy kernel: [ 50.272187] kjournald starting. Commit interval 5 seconds
Feb 14 15:29:46 italy kernel: [ 50.284922] EXT3 FS on dm-3, internal journal
Feb 14 15:29:46 italy kernel: [ 50.284922] EXT3-fs: mounted filesystem with ordered data mode.
Feb 14 15:29:46 italy kernel: [ 50.404042] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 50.660039] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 50.904039] usb 4-5: reset high speed USB device using ehci_hcd and address 2
Feb 14 15:29:46 italy kernel: [ 51.058149] kjournald starting. Commit interval 5 seconds
Feb 14 15:29:46 italy kernel: [ 51.058226] EXT3-fs: mounted filesystem with ordered data mode.
Feb 14 15:29:46 italy kernel: [ 51.102432] Adding 2330616k swap on /dev/mapper/italy-swap_1. Priority:-1 extents:1 across:2330616k
[-- Attachment #4: modules --]
[-- Type: text/plain, Size: 4655 bytes --]
nls_utf8 1760 0 - Live 0xf0c80000
isofs 28164 0 - Live 0xf0cbb000
zlib_inflate 14144 1 isofs, Live 0xf0c9b000
udf 67748 0 - Live 0xf0d07000
nls_base 6820 3 nls_utf8,isofs,udf, Live 0xf0c8f000
crc_itu_t 2080 1 udf, Live 0xf0ab5000
xt_multiport 2816 1 - Live 0xf0a62000
iptable_filter 2624 1 - Live 0xf0a43000
ip_tables 10160 1 iptable_filter, Live 0xf0c97000
x_tables 13284 2 xt_multiport,ip_tables, Live 0xf0c92000
binfmt_misc 7528 1 - Live 0xf0c88000
ppdev 6468 0 - Live 0xf0c85000
lp 8164 0 - Live 0xf0c82000
ipv6 235300 26 - Live 0xf0ccc000
radeon 118688 2 - Live 0xf0ad2000
drm 65256 3 radeon, Live 0xf0b49000
loop 12748 0 - Live 0xf0aab000
snd_bt87x 11268 0 - Live 0xf0ab1000
snd_ens1371 19072 1 - Live 0xf0a67000
gameport 10700 1 snd_ens1371, Live 0xf0a9f000
snd_ac97_codec 88484 1 snd_ens1371, Live 0xf0af0000
ac97_bus 1728 1 snd_ac97_codec, Live 0xf0a60000
snd_pcm_oss 32800 0 - Live 0xf0ab7000
snd_mixer_oss 12320 1 snd_pcm_oss, Live 0xf0a9a000
snd_pcm 62596 4 snd_bt87x,snd_ens1371,snd_ac97_codec,snd_pcm_oss, Live 0xf0ac1000
parport_pc 22500 1 - Live 0xf0aa4000
parport 30988 3 ppdev,lp,parport_pc, Live 0xf0a76000
serio_raw 4740 0 - Live 0xf0a64000
psmouse 32336 0 - Live 0xf0a6d000
via_ircc 15732 0 - Live 0xf09f0000
irda 95480 1 via_ircc, Live 0xf0a81000
snd_seq_dummy 2660 0 - Live 0xf09c8000
crc_ccitt 2080 1 irda, Live 0xf09e0000
i2c_viapro 6836 0 - Live 0xf0a5d000
pcspkr 2432 0 - Live 0xf092c000
tuner_simple 12080 1 - Live 0xf0a59000
tuner_types 13888 1 tuner_simple, Live 0xf09f6000
snd_seq_oss 24992 0 - Live 0xf0a51000
snd_seq_midi 5728 0 - Live 0xf09ca000
snd_rawmidi 18496 2 snd_ens1371,snd_seq_midi, Live 0xf0a3d000
tuner 21960 0 - Live 0xf0a36000
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi, Live 0xf09db000
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event, Live 0xf0a45000
tvaudio 19932 0 - Live 0xf0a08000
button 6096 0 - Live 0xf09d8000
snd_timer 17800 2 snd_pcm,snd_seq, Live 0xf09ea000
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq, Live 0xf0990000
snd 45604 13 snd_bt87x,snd_ens1371,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device, Live 0xf09fb000
bttv 148116 0 - Live 0xf0a10000
videodev 27520 2 tuner,bttv, Live 0xf09e2000
v4l1_compat 12260 1 videodev, Live 0xf09c4000
firmware_class 6816 1 bttv, Live 0xf09c1000
ir_common 39620 1 bttv, Live 0xf09cd000
compat_ioctl32 1312 1 bttv, Live 0xf095e000
soundcore 6368 1 snd, Live 0xf09be000
i2c_algo_bit 5188 1 bttv, Live 0xf09bb000
snd_page_alloc 7816 2 snd_bt87x,snd_pcm, Live 0xf0958000
v4l2_common 10240 3 tuner,tvaudio,bttv, Live 0xf0993000
videobuf_dma_sg 11140 1 bttv, Live 0xf09b7000
videobuf_core 16100 2 bttv,videobuf_dma_sg, Live 0xf09b2000
btcx_risc 4264 1 bttv, Live 0xf095b000
tveeprom 10980 1 bttv, Live 0xf098a000
i2c_core 19828 8 i2c_viapro,tuner_simple,tuner,tvaudio,bttv,i2c_algo_bit,v4l2_common,tveeprom, Live 0xf0960000
shpchp 25528 0 - Live 0xf0982000
pci_hotplug 23460 1 shpchp, Live 0xf097b000
via_agp 7744 1 - Live 0xf0941000
agpgart 28776 2 drm,via_agp, Live 0xf0972000
evdev 8000 4 - Live 0xf093e000
ext3 105512 5 - Live 0xf0997000
jbd 39444 1 ext3, Live 0xf0967000
mbcache 7108 1 ext3, Live 0xf0929000
sha256_generic 11360 0 - Live 0xf093a000
aes_i586 7744 2 - Live 0xf0937000
aes_generic 29256 1 aes_i586, Live 0xf092e000
cbc 3264 1 - Live 0xf0831000
sd_mod 22200 4 - Live 0xf08bd000
usb_storage 76032 2 - Live 0xf0944000
dm_crypt 11172 1 - Live 0xf08c9000
crypto_blkcipher 15236 3 cbc,dm_crypt, Live 0xf08c4000
dm_mirror 15104 0 - Live 0xf0883000
dm_log 8452 1 dm_mirror, Live 0xf0888000
dm_snapshot 14340 0 - Live 0xf0897000
dm_mod 46184 13 dm_crypt,dm_mirror,dm_log,dm_snapshot, Live 0xf08cf000
ide_cd_mod 27652 0 - Live 0xf08b5000
cdrom 30176 1 ide_cd_mod, Live 0xf088e000
ide_disk 10496 3 - Live 0xf085a000
ata_generic 4676 0 - Live 0xf085e000
libata 140384 1 ata_generic, Live 0xf0903000
scsi_mod 129356 3 sd_mod,usb_storage,libata, Live 0xf08e2000
dock 8304 1 libata, Live 0xf087f000
via82cxxx 6948 0 [permanent], Live 0xf0855000
ide_pci_generic 3908 0 [permanent], Live 0xf084c000
ide_core 96168 4 ide_cd_mod,ide_disk,via82cxxx,ide_pci_generic, Live 0xf089c000
uhci_hcd 18672 0 - Live 0xf084f000
ehci_hcd 28428 0 - Live 0xf0839000
ohci_hcd 18500 0 - Live 0xf0841000
usbcore 118160 5 usb_storage,uhci_hcd,ehci_hcd,ohci_hcd, Live 0xf0861000
8139too 20320 0 - Live 0xf082b000
8139cp 16800 0 - Live 0xf0833000
mii 4896 2 8139too,8139cp, Live 0xf0814000
thermal 15228 0 - Live 0xf081c000
processor 32576 2 thermal, Live 0xf0822000
fan 4164 0 - Live 0xf080d000
thermal_sys 10856 3 thermal,processor,fan, Live 0xf0810000
[-- Attachment #5: scsi --]
[-- Type: text/plain, Size: 336 bytes --]
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: HD500LJ Rev:
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: HD400LD Rev: WQ10
Type: Direct-Access ANSI SCSI revision: 00
[-- Attachment #6: iomem --]
[-- Type: text/plain, Size: 1276 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000cd000-000cffff : pnp 00:00
000f0000-000fffff : System ROM
00100000-2ffeffff : System RAM
00100000-002ba4aa : Kernel code
002ba4ab-0037661f : Kernel data
003bc000-0041f57f : Kernel bss
2fff0000-2fff2fff : ACPI Non-volatile Storage
2fff3000-2fffffff : ACPI Tables
d0000000-d7ffffff : 0000:00:00.0
d8000000-e7ffffff : PCI Bus 0000:01
d8000000-dfffffff : 0000:01:00.0
e0000000-e7ffffff : 0000:01:00.1
e8000000-e9ffffff : PCI Bus 0000:01
e8000000-e801ffff : 0000:01:00.0
e9000000-e900ffff : 0000:01:00.0
e9010000-e901ffff : 0000:01:00.1
ea000000-ea000fff : 0000:00:0a.0
ea000000-ea000fff : bttv0
ea001000-ea001fff : 0000:00:0a.1
ea001000-ea001fff : Bt87x audio
ea002000-ea0020ff : 0000:00:0b.0
ea002000-ea0020ff : 8139too
ea003000-ea003fff : 0000:00:0c.0
ea003000-ea003fff : ohci_hcd
ea004000-ea004fff : 0000:00:0c.1
ea004000-ea004fff : ohci_hcd
ea005000-ea005fff : 0000:00:0c.2
ea005000-ea005fff : ohci_hcd
ea006000-ea0060ff : 0000:00:0c.3
ea006000-ea0060ff : ehci_hcd
ea007000-ea0070ff : 0000:00:10.3
ea007000-ea0070ff : ehci_hcd
fee00000-fee00fff : pnp 00:00
fff80000-fffeffff : pnp 00:00
ffff0000-ffffffff : reserved
[-- Attachment #7: lspci --]
[-- Type: text/plain, Size: 14015 bytes --]
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: Elitegroup Computer Systems Device 1841
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ENS1371
Kernel modules: snd-ens1371
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: bttv
Kernel modules: bttv
00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ea001000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Bt87x
Kernel modules: snd-bt87x
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at ea002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
00:0c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation ASRock 939Dual-SATA2 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at ea003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation ASRock 939Dual-SATA2 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at ea004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation ASRock 939Dual-SATA2 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at ea005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: ALi Corporation Device 5272
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ea006000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=0090
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at ea007000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Elitegroup Computer Systems Device 1841
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: via-ircc, i2c-viapro
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at e400 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. ASUS Radeon 9200 SE / TD / 128M
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: radeonfb
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
Subsystem: ASUSTeK Computer Inc. Device c007
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e0000000 (32-bit, prefetchable) [disabled] [size=128M]
Region 1: Memory at e9010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #8: cpuinfo --]
[-- Type: text/plain, Size: 442 bytes --]
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) processor
stepping : 2
cpu MHz : 930.687
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow up
bogomips : 1863.87
clflush size : 32
power management:
[-- Attachment #9: ioports --]
[-- Type: text/plain, Size: 1184 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:11.1
0170-0177 : VP_IDE
01f0-01f7 : 0000:00:11.1
01f0-01f7 : VP_IDE
0290-0297 : pnp 00:03
02f8-02ff : serial
0376-0376 : 0000:00:11.1
0376-0376 : VP_IDE
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : 0000:00:11.1
03f6-03f6 : VP_IDE
03f8-03ff : serial
04d0-04d1 : pnp 00:03
0800-0805 : pnp 00:03
0cf8-0cff : PCI conf1
4000-407f : 0000:00:11.0
4000-407f : pnp 00:02
4000-4003 : ACPI PM1a_EVT_BLK
4008-400b : ACPI PM_TMR
4010-4015 : ACPI CPU throttle
4020-4023 : ACPI GPE0_BLK
40f0-40f1 : ACPI PM1a_CNT_BLK
5000-500f : 0000:00:11.0
5000-500f : pnp 00:02
5000-5007 : vt596_smbus
c000-cfff : PCI Bus 0000:01
c000-c0ff : 0000:01:00.0
d000-d03f : 0000:00:09.0
d000-d03f : Ensoniq AudioPCI
d400-d4ff : 0000:00:0b.0
d400-d4ff : 8139too
d800-d81f : 0000:00:10.0
d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:10.1
dc00-dc1f : uhci_hcd
e000-e01f : 0000:00:10.2
e000-e01f : uhci_hcd
e400-e40f : 0000:00:11.1
e400-e40f : VP_IDE
next reply other threads:[~2009-02-16 21:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-16 21:10 Bob Wilkinson [this message]
2009-02-16 21:41 ` [PROBLEM] Multiple BUG: unable to handle kernel paging request Arjan van de Ven
2009-02-17 18:15 ` Bob Wilkinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090216211012.GA31416@fourtheye.org \
--to=bob@fourtheye.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.