All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Borislav Petkov <petkovbb@gmail.com>
Subject: [PATCH 2/2] ide-floppy: use ide_pio_bytes()
Date: Wed, 18 Feb 2009 20:21:43 +0100	[thread overview]
Message-ID: <200902182021.43377.bzolnier@gmail.com> (raw)

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide-floppy: use ide_pio_bytes()

* Fix ide_init_sg_cmd() setup for non-fs requests.

* Convert ide_pc_intr() to use ide_pio_bytes() for floppy media.

* Remove no longer needed ide_io_buffers() and sg/sg_cnt fields
  from struct ide_atapi_pc.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c  |   57 +++++------------------------------------------
 drivers/ide/ide-floppy.c |    9 -------
 include/linux/ide.h      |    5 ----
 3 files changed, 8 insertions(+), 63 deletions(-)

Index: b/drivers/ide/ide-atapi.c
===================================================================
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -69,49 +69,6 @@ int ide_check_atapi_device(ide_drive_t *
 }
 EXPORT_SYMBOL_GPL(ide_check_atapi_device);
 
-/* PIO data transfer routine using the scatter gather table. */
-int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
-		    unsigned int bcount, int write)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
-	xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
-	struct scatterlist *sg = pc->sg;
-	char *buf;
-	int count, done = 0;
-
-	while (bcount) {
-		count = min(sg->length - pc->b_count, bcount);
-
-		if (PageHighMem(sg_page(sg))) {
-			unsigned long flags;
-
-			local_irq_save(flags);
-			buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
-			xf(drive, NULL, buf + pc->b_count, count);
-			kunmap_atomic(buf - sg->offset, KM_IRQ0);
-			local_irq_restore(flags);
-		} else {
-			buf = sg_virt(sg);
-			xf(drive, NULL, buf + pc->b_count, count);
-		}
-
-		bcount -= count;
-		pc->b_count += count;
-		done += count;
-
-		if (pc->b_count == sg->length) {
-			if (!--pc->sg_cnt)
-				break;
-			pc->sg = sg = sg_next(sg);
-			pc->b_count = 0;
-		}
-	}
-
-	return done;
-}
-EXPORT_SYMBOL_GPL(ide_io_buffers);
-
 void ide_init_pc(struct ide_atapi_pc *pc)
 {
 	memset(pc, 0, sizeof(*pc));
@@ -305,6 +262,7 @@ static ide_startstop_t ide_pc_intr(ide_d
 {
 	struct ide_atapi_pc *pc = drive->pc;
 	ide_hwif_t *hwif = drive->hwif;
+	struct ide_cmd *cmd = &hwif->cmd;
 	struct request *rq = hwif->rq;
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	xfer_func_t *xferfunc;
@@ -426,14 +384,13 @@ static ide_startstop_t ide_pc_intr(ide_d
 
 	xferfunc = write ? tp_ops->output_data : tp_ops->input_data;
 
-	if ((drive->media == ide_floppy && !pc->buf) ||
-	    (drive->media == ide_tape && pc->bh)) {
-		done = drive->pc_io_buffers(drive, pc, bcount, write);
-
+	if (drive->media == ide_floppy && pc->buf == NULL) {
+		done = min_t(unsigned int, bcount, cmd->nleft);
+		ide_pio_bytes(drive, cmd, write, done);
 		/* FIXME: don't do partial completions */
-		if (drive->media == ide_floppy)
-			ide_complete_rq(drive, 0,
-					done ? done : ide_rq_bytes(rq));
+		ide_complete_rq(drive, 0, done ? done : ide_rq_bytes(rq));
+	} else if (drive->media == ide_tape && pc->bh) {
+		done = drive->pc_io_buffers(drive, pc, bcount, write);
 	} else {
 		done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred);
 		xferfunc(drive, NULL, pc->cur_pos, done);
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -213,7 +213,6 @@ static void idefloppy_create_rw_cmd(ide_
 	memcpy(rq->cmd, pc->c, 12);
 
 	pc->rq = rq;
-	pc->b_count = 0;
 	if (rq->cmd_flags & REQ_RW)
 		pc->flags |= PC_FLAG_WRITING;
 	pc->buf = NULL;
@@ -227,7 +226,6 @@ static void idefloppy_blockpc_cmd(struct
 	ide_init_pc(pc);
 	memcpy(pc->c, rq->cmd, sizeof(pc->c));
 	pc->rq = rq;
-	pc->b_count = 0;
 	if (rq->data_len && rq_data_dir(rq) == WRITE)
 		pc->flags |= PC_FLAG_WRITING;
 	pc->buf = rq->data;
@@ -244,7 +242,6 @@ static ide_startstop_t ide_floppy_do_req
 					     struct request *rq, sector_t block)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
-	ide_hwif_t *hwif = drive->hwif;
 	struct ide_cmd cmd;
 	struct ide_atapi_pc *pc;
 
@@ -293,12 +290,9 @@ static ide_startstop_t ide_floppy_do_req
 
 	cmd.rq = rq;
 
-	ide_init_sg_cmd(&cmd, rq->nr_sectors << 9);
+	ide_init_sg_cmd(&cmd, pc->req_xfer);
 	ide_map_sg(drive, &cmd);
 
-	pc->sg = hwif->sg_table;
-	pc->sg_cnt = cmd.sg_nents;
-
 	pc->rq = rq;
 
 	return ide_floppy_issue_pc(drive, &cmd, pc);
@@ -484,7 +478,6 @@ static void ide_floppy_setup(ide_drive_t
 
 	drive->pc_callback	 = ide_floppy_callback;
 	drive->pc_update_buffers = idefloppy_update_buffers;
-	drive->pc_io_buffers	 = ide_io_buffers;
 
 	/*
 	 * We used to check revisions here. At this point however I'm giving up.
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -414,9 +414,6 @@ struct ide_atapi_pc {
 	struct idetape_bh *bh;
 	char *b_data;
 
-	struct scatterlist *sg;
-	unsigned int sg_cnt;
-
 	unsigned long timeout;
 };
 
@@ -1172,8 +1169,6 @@ void ide_tf_read(ide_drive_t *, struct i
 void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
 void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
 
-int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int);
-
 extern void SELECT_DRIVE(ide_drive_t *);
 void SELECT_MASK(ide_drive_t *, int);
 

                 reply	other threads:[~2009-02-18 19:21 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200902182021.43377.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.