From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
Date: Fri, 20 Feb 2009 18:12:36 +0100 [thread overview]
Message-ID: <20090220171236.25429.25264.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090220171139.25429.26702.sendpatchset@localhost.localdomain>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: move ide_map_sg() call out from ->dma_setup method
Move ide_map_sg() call from ->dma_setup implementations
and ide_destroy_dmatable() one from *_build_dmatable() to
ide_dma_prepare().
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/au1xxx-ide.c | 8 ++------
drivers/ide/ide-dma-sff.c | 2 --
drivers/ide/ide-dma.c | 8 ++++++--
drivers/ide/pmac.c | 6 +-----
drivers/ide/scc_pata.c | 4 +---
drivers/ide/sgiioc4.c | 6 +-----
drivers/ide/trm290.c | 5 ++---
drivers/ide/tx4939ide.c | 6 +-----
8 files changed, 14 insertions(+), 31 deletions(-)
Index: b/drivers/ide/au1xxx-ide.c
===================================================================
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -272,9 +272,7 @@ static int auide_build_dmatable(ide_driv
if (count)
return 1;
- use_pio_instead:
- ide_destroy_dmatable(drive);
-
+use_pio_instead:
return 0; /* revert to PIO for this request */
}
@@ -290,10 +288,8 @@ static void auide_dma_start(ide_drive_t
static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
{
- if (auide_build_dmatable(drive, cmd) == 0) {
- ide_map_sg(drive, cmd);
+ if (auide_build_dmatable(drive, cmd) == 0)
return 1;
- }
drive->waiting_for_dma = 1;
return 0;
Index: b/drivers/ide/ide-dma-sff.c
===================================================================
--- a/drivers/ide/ide-dma-sff.c
+++ b/drivers/ide/ide-dma-sff.c
@@ -166,8 +166,6 @@ use_pio_instead:
printk(KERN_ERR "%s: %s\n", drive->name,
count ? "DMA table too small" : "empty DMA table?");
- ide_destroy_dmatable(drive);
-
return 0; /* revert to PIO for this request */
}
EXPORT_SYMBOL_GPL(ide_build_dmatable);
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -566,8 +566,12 @@ int ide_dma_prepare(ide_drive_t *drive,
if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
(dma_ops->dma_check && dma_ops->dma_check(drive, cmd)) ||
- ide_build_sglist(drive, cmd) == 0 ||
- dma_ops->dma_setup(drive, cmd))
+ ide_build_sglist(drive, cmd) == 0)
return 1;
+ if (dma_ops->dma_setup(drive, cmd)) {
+ ide_destroy_dmatable(drive);
+ ide_map_sg(drive, cmd);
+ return 1;
+ }
return 0;
}
Index: b/drivers/ide/pmac.c
===================================================================
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1493,8 +1493,6 @@ static int pmac_ide_build_dmatable(ide_d
printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
use_pio_instead:
- ide_destroy_dmatable(drive);
-
return 0; /* revert to PIO for this request */
}
@@ -1510,10 +1508,8 @@ static int pmac_ide_dma_setup(ide_drive_
u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
- if (pmac_ide_build_dmatable(drive, cmd) == 0) {
- ide_map_sg(drive, cmd);
+ if (pmac_ide_build_dmatable(drive, cmd) == 0)
return 1;
- }
/* Apple adds 60ns to wrDataSetup on reads */
if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) {
Index: b/drivers/ide/scc_pata.c
===================================================================
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -321,10 +321,8 @@ static int scc_dma_setup(ide_drive_t *dr
u8 dma_stat;
/* fall back to pio! */
- if (ide_build_dmatable(drive, cmd) == 0) {
- ide_map_sg(drive, cmd);
+ if (ide_build_dmatable(drive, cmd) == 0)
return 1;
- }
/* PRD table */
out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
Index: b/drivers/ide/sgiioc4.c
===================================================================
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -478,8 +478,6 @@ static int sgiioc4_build_dmatable(ide_dr
}
use_pio_instead:
- ide_destroy_dmatable(drive);
-
return 0; /* revert to PIO for this request */
}
@@ -488,11 +486,9 @@ static int sgiioc4_dma_setup(ide_drive_t
int ddir;
u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
- if (sgiioc4_build_dmatable(drive, cmd) == 0) {
+ if (sgiioc4_build_dmatable(drive, cmd) == 0)
/* try PIO instead of DMA */
- ide_map_sg(drive, cmd);
return 1;
- }
if (write)
/* Writes TO the IOC4 FROM Main Memory */
Index: b/drivers/ide/trm290.c
===================================================================
--- a/drivers/ide/trm290.c
+++ b/drivers/ide/trm290.c
@@ -193,11 +193,10 @@ static int trm290_dma_setup(ide_drive_t
unsigned int count, rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 2;
count = ide_build_dmatable(drive, cmd);
- if (count == 0) {
- ide_map_sg(drive, cmd);
+ if (count == 0)
/* try PIO instead of DMA */
return 1;
- }
+
outl(hwif->dmatable_dma | rw, hwif->dma_base);
drive->waiting_for_dma = 1;
/* start DMA */
Index: b/drivers/ide/tx4939ide.c
===================================================================
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -279,8 +279,6 @@ use_pio_instead:
printk(KERN_ERR "%s: %s\n", drive->name,
count ? "DMA table too small" : "empty DMA table?");
- ide_destroy_dmatable(drive);
-
return 0; /* revert to PIO for this request */
}
#else
@@ -294,10 +292,8 @@ static int tx4939ide_dma_setup(ide_drive
u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
/* fall back to PIO! */
- if (tx4939ide_build_dmatable(drive, cmd) == 0) {
- ide_map_sg(drive, cmd);
+ if (tx4939ide_build_dmatable(drive, cmd) == 0)
return 1;
- }
/* PRD table */
tx4939ide_writel(hwif->dmatable_dma, base, TX4939IDE_PRD_Ptr);
next prev parent reply other threads:[~2009-02-20 17:10 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-20 17:11 [PATCH 00/10] ide: DMA methods cleanups/sanitizations Bartlomiej Zolnierkiewicz
2009-02-20 17:11 ` [PATCH 01/10] ide: add ->dma_clear method and remove ->dma_timeout one Bartlomiej Zolnierkiewicz
2009-03-08 22:17 ` Sergei Shtylyov
2009-02-20 17:11 ` [PATCH 02/10] ide: inline ide_dma_timeout() into ide_dma_timeout_retry() Bartlomiej Zolnierkiewicz
2009-03-08 22:18 ` Sergei Shtylyov
2009-02-20 17:12 ` [PATCH 03/10] ide: destroy DMA mappings after ending DMA Bartlomiej Zolnierkiewicz
2009-03-09 14:00 ` Sergei Shtylyov
2009-03-14 7:12 ` Grant Grundler
2009-03-14 19:51 ` Bartlomiej Zolnierkiewicz
2009-03-14 20:45 ` Grant Grundler
2009-03-14 20:50 ` James Bottomley
2009-02-20 17:12 ` [PATCH 04/10] ide: add ide_dma_prepare() helper Bartlomiej Zolnierkiewicz
2009-03-09 14:36 ` Sergei Shtylyov
2009-02-20 17:12 ` [PATCH 05/10] ns87415: use custom ->dma_{start,end} to handle ns87415_prepare_drive() Bartlomiej Zolnierkiewicz
2009-03-08 22:22 ` Sergei Shtylyov
2009-02-20 17:12 ` [PATCH 06/10] trm290: use custom ->dma_{start,end} to handle trm290_prepare_drive() Bartlomiej Zolnierkiewicz
2009-03-08 22:26 ` Sergei Shtylyov
2009-02-20 17:12 ` [PATCH 07/10] ide: add ->dma_check method Bartlomiej Zolnierkiewicz
2009-03-08 22:32 ` Sergei Shtylyov
2009-03-11 16:36 ` Bartlomiej Zolnierkiewicz
2009-02-20 17:12 ` Bartlomiej Zolnierkiewicz [this message]
2009-03-09 14:42 ` [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method Sergei Shtylyov
2009-03-11 16:36 ` Bartlomiej Zolnierkiewicz
2009-03-11 17:10 ` Sergei Shtylyov
2009-03-11 17:36 ` Bartlomiej Zolnierkiewicz
2009-02-20 17:12 ` [PATCH 09/10] ide: set/clear drive->waiting_for_dma flag in the core code Bartlomiej Zolnierkiewicz
2009-03-10 15:05 ` Sergei Shtylyov
2009-02-20 17:12 ` [PATCH 10/10] ide: sanitize ide_build_sglist() and ide_destroy_dmatable() Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090220171236.25429.25264.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.