From: Paolo Ornati <ornati@fastwebnet.it>
To: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Eric Anholt <eric@anholt.net>, Dave Airlie <airlied@linux.ie>
Subject: Re: [BISECTED] [drm:i915_initialize] *ERROR* can not ioremap virtual address for ring buffer
Date: Sat, 21 Feb 2009 13:49:33 +0100 [thread overview]
Message-ID: <20090221134933.368c2709@fastwebnet.it> (raw)
In-Reply-To: <20090221121944.GA21090@silver.sucs.org>
On Sat, 21 Feb 2009 12:19:44 +0000
Sitsofe Wheeler <sitsofe@yahoo.com> wrote:
> On Sat, Feb 21, 2009 at 11:00:11AM +0100, Paolo Ornati wrote:
> >
> > Booting current -git with that commit reverted (good) and not reverted
> > (bad), with "fastboot initcall_debug" I've noticed mtrr change:
>
> Does this happen when you enable the mtrr cleaner? -
> http://marc.info/?l=linux-kernel&m=123501581629566&w=2
>
> --
> Sitsofe | http://sucs.org/~sits/
Yes:
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc5
-# Fri Feb 20 22:37:54 2009
+# Sat Feb 21 13:43:17 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
@@ -275,7 +275,9 @@
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
-# CONFIG_MTRR_SANITIZER is not set
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
dmesg:
[ 0.000000] Linux version 2.6.29-rc5-00206-g402a917 (paolo@tux) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #45 SMP Sat Feb 21 13:44:16 CET 2009
[ 0.000000] Command line: root=/dev/sda2 ro fastboot initcall_debug
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007e599000 (usable)
[ 0.000000] BIOS-e820: 000000007e599000 - 000000007e5a6000 (reserved)
[ 0.000000] BIOS-e820: 000000007e5a6000 - 000000007e64d000 (usable)
[ 0.000000] BIOS-e820: 000000007e64d000 - 000000007e6a5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007e6a5000 - 000000007e6aa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007e6aa000 - 000000007e6ab000 (usable)
[ 0.000000] BIOS-e820: 000000007e6ab000 - 000000007e6f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007e6f2000 - 000000007e6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable)
[ 0.000000] BIOS-e820: 000000007e700000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7e700 max_arch_pfn = 0x100000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2032MB, range: 16MB, type UC
[ 0.000000] reg 2, base: 2024MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 2023MB, range: 1MB, type UC
[ 0.000000] total RAM coverred: 2023M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2023MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2024MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 2032MB, range: 16MB, type UC
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000007e700000
[ 0.000000] 0000000000 - 007e600000 page 2M
[ 0.000000] 007e600000 - 007e700000 page 4k
[ 0.000000] kernel direct mapping tables up to 7e700000 @ 8000-c000
[ 0.000000] last_map_addr: 7e700000 end: 7e700000
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[ 0.000000] ACPI: RSDT 7E6FD038, 0050 (r1 INTEL DG965SS 697 1000013)
[ 0.000000] ACPI: FACP 7E6FC000, 0074 (r1 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7E6F7000, 40ED (r1 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] ACPI: FACS 7E6AB000, 0040
[ 0.000000] ACPI: APIC 7E6F6000, 0078 (r1 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] ACPI: WDDT 7E6F5000, 0040 (r1 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] ACPI: MCFG 7E6F4000, 003C (r1 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] ACPI: ASF! 7E6F3000, 00A6 (r32 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] ACPI: HPET 7E6F2000, 0038 (r1 INTEL DG965SS 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7E6A9000, 01BC (r1 INTEL CpuPm 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7E6A8000, 0175 (r1 INTEL Cpu0Ist 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7E6A7000, 0175 (r1 INTEL Cpu1Ist 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7E6A6000, 0175 (r1 INTEL Cpu2Ist 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 7E6A5000, 0175 (r1 INTEL Cpu3Ist 697 MSFT 1000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007e700000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000874d28] TEXT DATA BSS ==> [0000200000 - 0000874d28]
[ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000fe200] 000fe200
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000100 -> 0x0007e599
[ 0.000000] 0: 0x0007e5a6 -> 0x0007e64d
[ 0.000000] 0: 0x0007e6aa -> 0x0007e6ab
[ 0.000000] 0: 0x0007e6ff -> 0x0007e700
[ 0.000000] On node 0 totalpages: 517585
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1756 pages reserved
[ 0.000000] DMA zone: 2171 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7025 pages used for memmap
[ 0.000000] DMA32 zone: 506577 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508748
[ 0.000000] Kernel command line: root=/dev/sda2 ro fastboot initcall_debug
[ 0.000000] Initializing CPU#0
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1864.864 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000999] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Memory: 2030916k/2071552k available (3653k kernel code, 1212k absent, 38700k reserved, 2054k data, 384k init)
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3729.72 BogoMIPS (lpj=1864864)
[ 0.000999] Mount-cache hash table entries: 256
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 2048K
[ 0.000999] [ds] using Core 2/Atom configuration
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 0
[ 0.000999] CPU0: Thermal monitoring enabled (TM2)
[ 0.000999] using mwait in idle threads.
[ 0.000999] ACPI: Core revision 20081204
[ 0.008053] Setting APIC routing to flat
[ 0.008437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019092] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.019996] calling migration_init+0x0/0x60 @ 1
[ 0.019996] initcall migration_init+0x0/0x60 returned 1 after 0 usecs
[ 0.019996] initcall migration_init+0x0/0x60 returned with error code 1
[ 0.019996] calling spawn_ksoftirqd+0x0/0x60 @ 1
[ 0.019996] initcall spawn_ksoftirqd+0x0/0x60 returned 0 after 0 usecs
[ 0.019996] calling init_call_single_data+0x0/0x70 @ 1
[ 0.019996] initcall init_call_single_data+0x0/0x70 returned 0 after 0 usecs
[ 0.019996] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 3729.43 BogoMIPS (lpj=1864715)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 2048K
[ 0.000999] [ds] using Core 2/Atom configuration
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.091241] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.091762] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.092021] Brought up 2 CPUs
[ 0.092065] Total of 2 processors activated (7459.15 BogoMIPS).
[ 0.093005] CPU0 attaching sched-domain:
[ 0.093008] domain 0: span 0-1 level MC
[ 0.093010] groups: 0 1
[ 0.093014] CPU1 attaching sched-domain:
[ 0.093016] domain 0: span 0-1 level MC
[ 0.093018] groups: 1 0
[ 0.093066] calling net_ns_init+0x0/0x190 @ 1
[ 0.093089] net_namespace: 1344 bytes
[ 0.093134] initcall net_ns_init+0x0/0x190 returned 0 after 0 usecs
[ 0.093184] calling init_smp_flush+0x0/0x60 @ 1
[ 0.093230] initcall init_smp_flush+0x0/0x60 returned 0 after 0 usecs
[ 0.093281] calling alloc_frozen_cpus+0x0/0x10 @ 1
[ 0.093328] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs
[ 0.093380] calling sysctl_init+0x0/0x20 @ 1
[ 0.093427] initcall sysctl_init+0x0/0x20 returned 0 after 0 usecs
[ 0.093477] calling ksysfs_init+0x0/0xc0 @ 1
[ 0.093527] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.093576] calling async_init+0x0/0x50 @ 1
[ 0.093631] initcall async_init+0x0/0x50 returned 0 after 0 usecs
[ 0.093631] calling init_jiffies_clocksource+0x0/0x20 @ 1
[ 0.093990] initcall init_jiffies_clocksource+0x0/0x20 returned 0 after 0 usecs
[ 0.094057] calling pm_init+0x0/0x40 @ 1
[ 0.094105] initcall pm_init+0x0/0x40 returned 0 after 0 usecs
[ 0.094154] calling filelock_init+0x0/0x30 @ 1
[ 0.094204] initcall filelock_init+0x0/0x30 returned 0 after 0 usecs
[ 0.094254] calling init_misc_binfmt+0x0/0x50 @ 1
[ 0.094302] initcall init_misc_binfmt+0x0/0x50 returned 0 after 0 usecs
[ 0.094352] calling init_script_binfmt+0x0/0x20 @ 1
[ 0.094399] initcall init_script_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.094450] calling init_elf_binfmt+0x0/0x20 @ 1
[ 0.094496] initcall init_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.094547] calling init_compat_elf_binfmt+0x0/0x20 @ 1
[ 0.094595] initcall init_compat_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.094646] calling debugfs_init+0x0/0x60 @ 1
[ 0.094694] initcall debugfs_init+0x0/0x60 returned 0 after 0 usecs
[ 0.094744] calling random32_init+0x0/0xf0 @ 1
[ 0.094790] initcall random32_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.094840] calling cpuidle_init+0x0/0x50 @ 1
[ 0.094889] initcall cpuidle_init+0x0/0x50 returned 0 after 0 usecs
[ 0.094939] calling sock_init+0x0/0x60 @ 1
[ 0.095008] initcall sock_init+0x0/0x60 returned 0 after 0 usecs
[ 0.095058] calling netlink_proto_init+0x0/0x170 @ 1
[ 0.095679] NET: Registered protocol family 16
[ 0.095732] initcall netlink_proto_init+0x0/0x170 returned 0 after 0 usecs
[ 0.095784] calling bdi_class_init+0x0/0x50 @ 1
[ 0.095837] initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.095837] calling kobject_uevent_init+0x0/0x50 @ 1
[ 0.095989] initcall kobject_uevent_init+0x0/0x50 returned 0 after 0 usecs
[ 0.096040] calling pcibus_class_init+0x0/0x20 @ 1
[ 0.096095] initcall pcibus_class_init+0x0/0x20 returned 0 after 0 usecs
[ 0.096095] calling pci_driver_init+0x0/0x20 @ 1
[ 0.096095] initcall pci_driver_init+0x0/0x20 returned 0 after 0 usecs
[ 0.096095] calling tty_class_init+0x0/0x40 @ 1
[ 0.096096] initcall tty_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.096096] calling vtconsole_class_init+0x0/0xe0 @ 1
[ 0.096096] initcall vtconsole_class_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.096096] calling i2c_init+0x0/0x80 @ 1
[ 0.096096] initcall i2c_init+0x0/0x80 returned 0 after 0 usecs
[ 0.096096] calling amd_postcore_init+0x0/0x8c0 @ 1
[ 0.096096] initcall amd_postcore_init+0x0/0x8c0 returned 0 after 0 usecs
[ 0.096138] calling arch_kdebugfs_init+0x0/0x30 @ 1
[ 0.096188] initcall arch_kdebugfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.096239] calling mtrr_if_init+0x0/0x80 @ 1
[ 0.096989] initcall mtrr_if_init+0x0/0x80 returned 0 after 0 usecs
[ 0.097039] calling ffh_cstate_init+0x0/0x40 @ 1
[ 0.097086] initcall ffh_cstate_init+0x0/0x40 returned 0 after 0 usecs
[ 0.097136] calling acpi_pci_init+0x0/0x60 @ 1
[ 0.097183] ACPI: bus type pci registered
[ 0.097228] initcall acpi_pci_init+0x0/0x60 returned 0 after 0 usecs
[ 0.097278] calling init_acpi_device_notify+0x0/0x4b @ 1
[ 0.097326] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 usecs
[ 0.097393] calling dmi_id_init+0x0/0x300 @ 1
[ 0.097446] initcall dmi_id_init+0x0/0x300 returned 0 after 0 usecs
[ 0.097446] calling pci_arch_init+0x0/0x70 @ 1
[ 0.097446] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.097446] PCI: Not using MMCONFIG.
[ 0.097446] PCI: Using configuration type 1 for base access
[ 0.097446] initcall pci_arch_init+0x0/0x70 returned 0 after 0 usecs
[ 0.097446] calling topology_init+0x0/0x40 @ 1
[ 0.097446] initcall topology_init+0x0/0x40 returned 0 after 0 usecs
[ 0.097987] calling mtrr_init_finialize+0x0/0x50 @ 1
[ 0.098035] initcall mtrr_init_finialize+0x0/0x50 returned 0 after 0 usecs
[ 0.098087] calling param_sysfs_init+0x0/0x210 @ 1
[ 0.101015] initcall param_sysfs_init+0x0/0x210 returned 0 after 2929 usecs
[ 0.101988] calling pm_sysrq_init+0x0/0x20 @ 1
[ 0.102034] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[ 0.102085] calling readahead_init+0x0/0x40 @ 1
[ 0.102151] initcall readahead_init+0x0/0x40 returned 0 after 0 usecs
[ 0.102151] calling init_bio+0x0/0xe0 @ 1
[ 0.102151] bio: create slab <bio-0> at 0
[ 0.102151] initcall init_bio+0x0/0xe0 returned 0 after 0 usecs
[ 0.102191] calling blk_settings_init+0x0/0x30 @ 1
[ 0.102239] initcall blk_settings_init+0x0/0x30 returned 0 after 0 usecs
[ 0.102290] calling blk_ioc_init+0x0/0x30 @ 1
[ 0.102337] initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs
[ 0.102387] calling blk_softirq_init+0x0/0x80 @ 1
[ 0.102434] initcall blk_softirq_init+0x0/0x80 returned 0 after 0 usecs
[ 0.102485] calling genhd_device_init+0x0/0x70 @ 1
[ 0.102552] initcall genhd_device_init+0x0/0x70 returned 0 after 0 usecs
[ 0.102552] calling pci_slot_init+0x0/0x50 @ 1
[ 0.102552] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 0.103000] calling fbmem_init+0x0/0xa0 @ 1
[ 0.103060] initcall fbmem_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.103060] calling acpi_init+0x0/0x239 @ 1
[ 0.103529] ACPI: EC: Look up EC in DSDT
[ 0.107430] ACPI: Interpreter enabled
[ 0.107476] ACPI: (supports S0 S3 S5)
[ 0.107585] ACPI: Using IOAPIC for interrupt routing
[ 0.107672] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.108744] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.113808] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.113858] initcall acpi_init+0x0/0x239 returned 0 after 9764 usecs
[ 0.113909] calling acpi_scan_init+0x0/0x10e @ 1
[ 0.118741] initcall acpi_scan_init+0x0/0x10e returned 0 after 4882 usecs
[ 0.118741] calling acpi_ec_init+0x0/0x61 @ 1
[ 0.118985] initcall acpi_ec_init+0x0/0x61 returned 0 after 976 usecs
[ 0.119037] calling dock_init+0x0/0x8d @ 1
[ 0.119191] ACPI: No dock devices found.
[ 0.119236] initcall dock_init+0x0/0x8d returned 0 after 0 usecs
[ 0.119286] calling acpi_pci_root_init+0x0/0x28 @ 1
[ 0.119344] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.119413] pci 0000:00:02.0: reg 10 32bit mmio: [0x90200000-0x902fffff]
[ 0.119413] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
[ 0.119413] pci 0000:00:02.0: reg 20 io port: [0x3410-0x3417]
[ 0.119413] pci 0000:00:03.0: reg 10 64bit mmio: [0x90326100-0x9032610f]
[ 0.119413] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.119413] pci 0000:00:03.0: PME# disabled
[ 0.119413] pci 0000:00:19.0: reg 10 32bit mmio: [0x90300000-0x9031ffff]
[ 0.119413] pci 0000:00:19.0: reg 14 32bit mmio: [0x90324000-0x90324fff]
[ 0.119413] pci 0000:00:19.0: reg 18 io port: [0x30e0-0x30ff]
[ 0.119413] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.119413] pci 0000:00:19.0: PME# disabled
[ 0.119461] pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df]
[ 0.119506] pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf]
[ 0.120012] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90325c00-0x90325fff]
[ 0.120060] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.120111] pci 0000:00:1a.7: PME# disabled
[ 0.120189] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90320000-0x90323fff]
[ 0.120229] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120279] pci 0000:00:1b.0: PME# disabled
[ 0.120374] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120424] pci 0000:00:1c.0: PME# disabled
[ 0.120520] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.120571] pci 0000:00:1c.1: PME# disabled
[ 0.120667] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.120718] pci 0000:00:1c.2: PME# disabled
[ 0.120816] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.120867] pci 0000:00:1c.3: PME# disabled
[ 0.120963] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.120984] pci 0000:00:1c.4: PME# disabled
[ 0.121068] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.121112] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.121156] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.121206] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90325800-0x90325bff]
[ 0.121253] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.121304] pci 0000:00:1d.7: PME# disabled
[ 0.121456] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.121526] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.121578] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.121699] pci 0000:00:1f.2: reg 10 io port: [0x3408-0x340f]
[ 0.121705] pci 0000:00:1f.2: reg 14 io port: [0x341c-0x341f]
[ 0.121710] pci 0000:00:1f.2: reg 18 io port: [0x3400-0x3407]
[ 0.121715] pci 0000:00:1f.2: reg 1c io port: [0x3418-0x341b]
[ 0.121720] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
[ 0.121725] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90325000-0x903257ff]
[ 0.121752] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121800] pci 0000:00:1f.2: PME# disabled
[ 0.121863] pci 0000:00:1f.3: reg 10 32bit mmio: [0x90326000-0x903260ff]
[ 0.121879] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.122011] pci 0000:02:00.0: reg 10 io port: [0x2018-0x201f]
[ 0.122019] pci 0000:02:00.0: reg 14 io port: [0x2024-0x2027]
[ 0.122026] pci 0000:02:00.0: reg 18 io port: [0x2010-0x2017]
[ 0.122033] pci 0000:02:00.0: reg 1c io port: [0x2020-0x2023]
[ 0.122041] pci 0000:02:00.0: reg 20 io port: [0x2000-0x200f]
[ 0.122048] pci 0000:02:00.0: reg 24 32bit mmio: [0x90100000-0x901001ff]
[ 0.122088] pci 0000:02:00.0: supports D1
[ 0.122089] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.122140] pci 0000:02:00.0: PME# disabled
[ 0.122225] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.122228] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
[ 0.122381] pci 0000:06:01.0: reg 10 io port: [0x1000-0x10ff]
[ 0.122387] pci 0000:06:01.0: reg 14 32bit mmio: [0x90000000-0x900000ff]
[ 0.122428] pci 0000:06:01.0: supports D1 D2
[ 0.122430] pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.122481] pci 0000:06:01.0: PME# disabled
[ 0.122564] pci 0000:00:1e.0: transparent bridge
[ 0.122611] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 0.122615] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff]
[ 0.122643] pci_bus 0000:00: on NUMA node 0
[ 0.122648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.122890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.123074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.123147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.123216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.123286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.123355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.128206] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 8787 usecs
[ 0.128206] calling acpi_pci_link_init+0x0/0x63 @ 1
[ 0.129031] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.129381] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.129728] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.130079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.130426] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.130771] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.131091] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.131437] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.131725] initcall acpi_pci_link_init+0x0/0x63 returned 0 after 2929 usecs
[ 0.131725] calling acpi_power_init+0x0/0x77 @ 1
[ 0.131725] initcall acpi_power_init+0x0/0x77 returned 0 after 0 usecs
[ 0.131725] calling acpi_system_init+0x0/0x1b3 @ 1
[ 0.132094] initcall acpi_system_init+0x0/0x1b3 returned 0 after 0 usecs
[ 0.132146] calling pnp_init+0x0/0x20 @ 1
[ 0.132198] initcall pnp_init+0x0/0x20 returned 0 after 0 usecs
[ 0.132198] calling misc_init+0x0/0xb0 @ 1
[ 0.132198] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.132198] calling init_scsi+0x0/0xa0 @ 1
[ 0.132198] SCSI subsystem initialized
[ 0.132198] initcall init_scsi+0x0/0xa0 returned 0 after 0 usecs
[ 0.132198] calling ata_init+0x0/0x3b0 @ 1
[ 0.132198] libata version 3.00 loaded.
[ 0.132198] initcall ata_init+0x0/0x3b0 returned 0 after 0 usecs
[ 0.132198] calling usb_init+0x0/0x160 @ 1
[ 0.132998] usbcore: registered new interface driver usbfs
[ 0.133063] usbcore: registered new interface driver hub
[ 0.133063] usbcore: registered new device driver usb
[ 0.133063] initcall usb_init+0x0/0x160 returned 0 after 976 usecs
[ 0.133093] calling serio_init+0x0/0xb0 @ 1
[ 0.133145] initcall serio_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.133145] calling input_init+0x0/0x130 @ 1
[ 0.133145] initcall input_init+0x0/0x130 returned 0 after 0 usecs
[ 0.133145] calling power_supply_class_init+0x0/0x40 @ 1
[ 0.133145] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.133145] calling hwmon_init+0x0/0x50 @ 1
[ 0.133145] initcall hwmon_init+0x0/0x50 returned 0 after 0 usecs
[ 0.133145] calling thermal_init+0x0/0x50 @ 1
[ 0.133145] initcall thermal_init+0x0/0x50 returned 0 after 0 usecs
[ 0.133982] calling pci_subsys_init+0x0/0x120 @ 1
[ 0.134028] PCI: Using ACPI for IRQ routing
[ 0.134160] initcall pci_subsys_init+0x0/0x120 returned 0 after 0 usecs
[ 0.134211] calling proto_init+0x0/0x20 @ 1
[ 0.134259] initcall proto_init+0x0/0x20 returned 0 after 0 usecs
[ 0.134308] calling net_dev_init+0x0/0x180 @ 1
[ 0.134365] initcall net_dev_init+0x0/0x180 returned 0 after 0 usecs
[ 0.134365] calling neigh_init+0x0/0x80 @ 1
[ 0.134365] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
[ 0.134365] calling genl_init+0x0/0xe0 @ 1
[ 0.138987] initcall genl_init+0x0/0xe0 returned 0 after 4882 usecs
[ 0.139039] calling sysctl_init+0x0/0x50 @ 1
[ 0.139088] initcall sysctl_init+0x0/0x50 returned 0 after 0 usecs
[ 0.139150] calling pci_iommu_init+0x0/0x20 @ 1
[ 0.139214] initcall pci_iommu_init+0x0/0x20 returned 0 after 0 usecs
[ 0.139265] calling print_all_ICs+0x0/0x510 @ 1
[ 0.139314] initcall print_all_ICs+0x0/0x510 returned 0 after 0 usecs
[ 0.139364] calling hpet_late_init+0x0/0x1f0 @ 1
[ 0.139413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.139534] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.140988] initcall hpet_late_init+0x0/0x1f0 returned 0 after 1952 usecs
[ 0.141038] calling clocksource_done_booting+0x0/0x20 @ 1
[ 0.141089] initcall clocksource_done_booting+0x0/0x20 returned 0 after 0 usecs
[ 0.141982] calling init_pipe_fs+0x0/0x60 @ 1
[ 0.142047] initcall init_pipe_fs+0x0/0x60 returned 0 after 6 usecs
[ 0.142097] calling init_mnt_writers+0x0/0x70 @ 1
[ 0.142143] initcall init_mnt_writers+0x0/0x70 returned 0 after 0 usecs
[ 0.142194] calling eventpoll_init+0x0/0xc0 @ 1
[ 0.142814] initcall eventpoll_init+0x0/0xc0 returned 0 after 2 usecs
[ 0.142864] calling anon_inode_init+0x0/0x140 @ 1
[ 0.142915] initcall anon_inode_init+0x0/0x140 returned 0 after 4 usecs
[ 0.142968] calling acpi_event_init+0x0/0x81 @ 1
[ 0.145986] initcall acpi_event_init+0x0/0x81 returned 0 after 2900 usecs
[ 0.146039] calling pnpacpi_init+0x0/0xa0 @ 1
[ 0.146086] pnp: PnP ACPI init
[ 0.146145] ACPI: bus type pnp registered
[ 0.149297] pnp: PnP ACPI: found 12 devices
[ 0.149342] ACPI: ACPI bus type pnp unregistered
[ 0.149389] initcall pnpacpi_init+0x0/0xa0 returned 0 after 3223 usecs
[ 0.149440] calling pnp_system_init+0x0/0x20 @ 1
[ 0.149493] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
[ 0.149545] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.149597] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.149649] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.149701] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.149753] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.149804] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.149856] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.149908] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.149959] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.150018] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.150068] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.150118] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.150199] initcall pnp_system_init+0x0/0x20 returned 0 after 696 usecs
[ 0.150250] calling chr_dev_init+0x0/0xb0 @ 1
[ 0.150606] initcall chr_dev_init+0x0/0xb0 returned 0 after 302 usecs
[ 0.150657] calling firmware_class_init+0x0/0x90 @ 1
[ 0.150733] initcall firmware_class_init+0x0/0x90 returned 0 after 28 usecs
[ 0.150785] calling init_acpi_pm_clocksource+0x0/0x100 @ 1
[ 0.155356] initcall init_acpi_pm_clocksource+0x0/0x100 returned 0 after 4415 usecs
[ 0.155424] calling pcibios_assign_resources+0x0/0x90 @ 1
[ 0.155505] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.155554] pci 0000:00:1c.0: IO window: disabled
[ 0.155602] pci 0000:00:1c.0: MEM window: disabled
[ 0.155650] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.155700] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.155750] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.155799] pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff
[ 0.155850] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.155900] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.155948] pci 0000:00:1c.2: IO window: disabled
[ 0.155999] pci 0000:00:1c.2: MEM window: disabled
[ 0.156046] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.156097] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.156145] pci 0000:00:1c.3: IO window: disabled
[ 0.156193] pci 0000:00:1c.3: MEM window: disabled
[ 0.156240] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.156291] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[ 0.156339] pci 0000:00:1c.4: IO window: disabled
[ 0.156387] pci 0000:00:1c.4: MEM window: disabled
[ 0.156435] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.156485] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.156534] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.156584] pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff
[ 0.156634] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.156693] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.156745] pci 0000:00:1c.0: setting latency timer to 64
[ 0.156753] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.156805] pci 0000:00:1c.1: setting latency timer to 64
[ 0.156811] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.156864] pci 0000:00:1c.2: setting latency timer to 64
[ 0.156871] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.156923] pci 0000:00:1c.3: setting latency timer to 64
[ 0.156929] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.156981] pci 0000:00:1c.4: setting latency timer to 64
[ 0.156992] pci 0000:00:1e.0: setting latency timer to 64
[ 0.156995] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.156997] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.156999] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.157001] pci_bus 0000:01: resource 1 mem: [0x0-0x0]
[ 0.157003] pci_bus 0000:01: resource 2 mem: [0x0-0x0]
[ 0.157005] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.157007] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.157009] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff]
[ 0.157011] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.157013] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.157014] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.157016] pci_bus 0000:03: resource 1 mem: [0x0-0x0]
[ 0.157018] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.157020] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.157022] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.157023] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[ 0.157025] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.157027] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.157029] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
[ 0.157030] pci_bus 0000:05: resource 1 mem: [0x0-0x0]
[ 0.157032] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 0.157034] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
[ 0.157036] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
[ 0.157038] pci_bus 0000:06: resource 1 mem: [0x90000000-0x900fffff]
[ 0.157040] pci_bus 0000:06: resource 2 mem: [0x0-0x0]
[ 0.157042] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.157044] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.157047] initcall pcibios_assign_resources+0x0/0x90 returned 0 after 1536 usecs
[ 0.157116] calling sysctl_core_init+0x0/0x40 @ 1
[ 0.157166] initcall sysctl_core_init+0x0/0x40 returned 0 after 3 usecs
[ 0.157217] calling inet_init+0x0/0x240 @ 1
[ 0.157269] NET: Registered protocol family 2
[ 0.168226] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.168505] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.170411] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.170946] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.170997] TCP reno registered
[ 0.173338] initcall inet_init+0x0/0x240 returned 0 after 15691 usecs
[ 0.173402] calling af_unix_init+0x0/0x70 @ 1
[ 0.173456] NET: Registered protocol family 1
[ 0.173505] initcall af_unix_init+0x0/0x70 returned 0 after 56 usecs
[ 0.173558] calling populate_rootfs+0x0/0x100 @ 1
[ 0.173711] initcall populate_rootfs+0x0/0x100 returned 0 after 103 usecs
[ 0.173763] calling i8259A_init_sysfs+0x0/0x30 @ 1
[ 0.173933] initcall i8259A_init_sysfs+0x0/0x30 returned 0 after 119 usecs
[ 0.173985] calling vsyscall_init+0x0/0x70 @ 1
[ 0.174038] initcall vsyscall_init+0x0/0x70 returned 0 after 7 usecs
[ 0.174088] calling sbf_init+0x0/0xf0 @ 1
[ 0.174134] initcall sbf_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.174184] calling i8237A_init_sysfs+0x0/0x30 @ 1
[ 0.174300] initcall i8237A_init_sysfs+0x0/0x30 returned 0 after 67 usecs
[ 0.174352] calling add_rtc_cmos+0x0/0xb0 @ 1
[ 0.174401] initcall add_rtc_cmos+0x0/0xb0 returned 0 after 2 usecs
[ 0.174453] calling cache_sysfs_init+0x0/0x70 @ 1
[ 0.174771] initcall cache_sysfs_init+0x0/0x70 returned 0 after 264 usecs
[ 0.174823] calling mce_init_device+0x0/0xb0 @ 1
[ 0.175021] initcall mce_init_device+0x0/0xb0 returned 0 after 147 usecs
[ 0.175073] calling periodic_mcheck_init+0x0/0x50 @ 1
[ 0.175122] initcall periodic_mcheck_init+0x0/0x50 returned 0 after 1 usecs
[ 0.175174] calling thermal_throttle_init_device+0x0/0xa0 @ 1
[ 0.175227] initcall thermal_throttle_init_device+0x0/0xa0 returned 0 after 3 usecs
[ 0.175298] calling msr_init+0x0/0x120 @ 1
[ 0.175446] initcall msr_init+0x0/0x120 returned 0 after 99 usecs
[ 0.175495] calling cpuid_init+0x0/0x120 @ 1
[ 0.175642] initcall cpuid_init+0x0/0x120 returned 0 after 98 usecs
[ 0.175693] calling init_lapic_sysfs+0x0/0x30 @ 1
[ 0.175795] initcall init_lapic_sysfs+0x0/0x30 returned 0 after 54 usecs
[ 0.175847] calling ioapic_init_sysfs+0x0/0xf0 @ 1
[ 0.175952] initcall ioapic_init_sysfs+0x0/0xf0 returned 0 after 57 usecs
[ 0.176004] calling add_pcspkr+0x0/0x30 @ 1
[ 0.176087] initcall add_pcspkr+0x0/0x30 returned 0 after 37 usecs
[ 0.176137] calling uv_ptc_init+0x0/0x60 @ 1
[ 0.176183] initcall uv_ptc_init+0x0/0x60 returned 0 after 0 usecs
[ 0.176233] calling uv_bau_init+0x0/0x4a0 @ 1
[ 0.176288] initcall uv_bau_init+0x0/0x4a0 returned 0 after 0 usecs
[ 0.176338] calling sgi_uv_sysfs_init+0x0/0xb0 @ 1
[ 0.176392] initcall sgi_uv_sysfs_init+0x0/0xb0 returned 0 after 6 usecs
[ 0.176443] calling init_vdso_vars+0x0/0x210 @ 1
[ 0.176501] initcall init_vdso_vars+0x0/0x210 returned 0 after 11 usecs
[ 0.176552] calling ia32_binfmt_init+0x0/0x20 @ 1
[ 0.176599] initcall ia32_binfmt_init+0x0/0x20 returned 0 after 0 usecs
[ 0.176650] calling sysenter_setup+0x0/0x350 @ 1
[ 0.176700] initcall sysenter_setup+0x0/0x350 returned 0 after 3 usecs
[ 0.176751] calling init_sched_debug_procfs+0x0/0x30 @ 1
[ 0.176802] initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 3 usecs
[ 0.176870] calling proc_schedstat_init+0x0/0x30 @ 1
[ 0.176918] initcall proc_schedstat_init+0x0/0x30 returned 0 after 1 usecs
[ 0.176969] calling proc_execdomains_init+0x0/0x30 @ 1
[ 0.177018] initcall proc_execdomains_init+0x0/0x30 returned 0 after 1 usecs
[ 0.177070] calling ioresources_init+0x0/0x40 @ 1
[ 0.177119] initcall ioresources_init+0x0/0x40 returned 0 after 1 usecs
[ 0.177170] calling uid_cache_init+0x0/0x70 @ 1
[ 0.177219] initcall uid_cache_init+0x0/0x70 returned 0 after 3 usecs
[ 0.177272] calling init_posix_timers+0x0/0x120 @ 1
[ 0.177321] initcall init_posix_timers+0x0/0x120 returned 0 after 1 usecs
[ 0.177373] calling init_posix_cpu_timers+0x0/0xe0 @ 1
[ 0.177420] initcall init_posix_cpu_timers+0x0/0xe0 returned 0 after 0 usecs
[ 0.177472] calling nsproxy_cache_init+0x0/0x30 @ 1
[ 0.177520] initcall nsproxy_cache_init+0x0/0x30 returned 0 after 0 usecs
[ 0.177572] calling timekeeping_init_device+0x0/0x30 @ 1
[ 0.177677] initcall timekeeping_init_device+0x0/0x30 returned 0 after 55 usecs
[ 0.177745] calling init_clocksource_sysfs+0x0/0x60 @ 1
[ 0.177848] initcall init_clocksource_sysfs+0x0/0x60 returned 0 after 53 usecs
[ 0.177916] calling init_timer_list_procfs+0x0/0x30 @ 1
[ 0.177965] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 1 usecs
[ 0.178017] calling futex_init+0x0/0x70 @ 1
[ 0.178071] initcall futex_init+0x0/0x70 returned 0 after 8 usecs
[ 0.178121] calling proc_dma_init+0x0/0x30 @ 1
[ 0.178168] initcall proc_dma_init+0x0/0x30 returned 0 after 1 usecs
[ 0.178218] calling proc_modules_init+0x0/0x30 @ 1
[ 0.178269] initcall proc_modules_init+0x0/0x30 returned 0 after 1 usecs
[ 0.178322] calling percpu_modinit+0x0/0x80 @ 1
[ 0.178368] initcall percpu_modinit+0x0/0x80 returned 0 after 0 usecs
[ 0.178419] calling kallsyms_init+0x0/0x30 @ 1
[ 0.178466] initcall kallsyms_init+0x0/0x30 returned 0 after 0 usecs
[ 0.178516] calling utsname_sysctl_init+0x0/0x20 @ 1
[ 0.178565] initcall utsname_sysctl_init+0x0/0x20 returned 0 after 1 usecs
[ 0.178616] calling init_lstats_procfs+0x0/0x30 @ 1
[ 0.178664] initcall init_lstats_procfs+0x0/0x30 returned 0 after 1 usecs
[ 0.178716] calling init_per_zone_pages_min+0x0/0xb0 @ 1
[ 0.178823] initcall init_per_zone_pages_min+0x0/0xb0 returned 0 after 58 usecs
[ 0.178891] calling pdflush_init+0x0/0x20 @ 1
[ 0.178984] initcall pdflush_init+0x0/0x20 returned 0 after 46 usecs
[ 0.179034] calling kswapd_init+0x0/0x20 @ 1
[ 0.179103] initcall kswapd_init+0x0/0x20 returned 0 after 22 usecs
[ 0.179156] calling init_tmpfs+0x0/0xf0 @ 1
[ 0.179222] initcall init_tmpfs+0x0/0xf0 returned 0 after 20 usecs
[ 0.179278] calling setup_vmstat+0x0/0xd0 @ 1
[ 0.179330] initcall setup_vmstat+0x0/0xd0 returned 0 after 6 usecs
[ 0.179379] calling mm_sysfs_init+0x0/0x30 @ 1
[ 0.179428] initcall mm_sysfs_init+0x0/0x30 returned 0 after 2 usecs
[ 0.179478] calling proc_vmalloc_init+0x0/0x30 @ 1
[ 0.179526] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 1 usecs
[ 0.179576] calling procswaps_init+0x0/0x30 @ 1
[ 0.179624] initcall procswaps_init+0x0/0x30 returned 0 after 1 usecs
[ 0.179674] calling slab_proc_init+0x0/0x30 @ 1
[ 0.179721] initcall slab_proc_init+0x0/0x30 returned 0 after 1 usecs
[ 0.180346] calling slab_sysfs_init+0x0/0x100 @ 1
[ 0.182454] initcall slab_sysfs_init+0x0/0x100 returned 0 after 2012 usecs
[ 0.182506] calling fasync_init+0x0/0x30 @ 1
[ 0.182555] initcall fasync_init+0x0/0x30 returned 0 after 3 usecs
[ 0.182604] calling proc_filesystems_init+0x0/0x30 @ 1
[ 0.182654] initcall proc_filesystems_init+0x0/0x30 returned 0 after 2 usecs
[ 0.182706] calling dnotify_init+0x0/0x30 @ 1
[ 0.182812] initcall dnotify_init+0x0/0x30 returned 0 after 58 usecs
[ 0.182862] calling inotify_setup+0x0/0x20 @ 1
[ 0.182908] initcall inotify_setup+0x0/0x20 returned 0 after 0 usecs
[ 0.182958] calling inotify_user_setup+0x0/0xc0 @ 1
[ 0.183016] initcall inotify_user_setup+0x0/0xc0 returned 0 after 11 usecs
[ 0.183067] calling aio_setup+0x0/0x80 @ 1
[ 0.183211] initcall aio_setup+0x0/0x80 returned 0 after 95 usecs
[ 0.183264] calling proc_locks_init+0x0/0x30 @ 1
[ 0.183313] initcall proc_locks_init+0x0/0x30 returned 0 after 3 usecs
[ 0.183363] calling init_sys32_ioctl+0x0/0x90 @ 1
[ 0.183424] initcall init_sys32_ioctl+0x0/0x90 returned 0 after 13 usecs
[ 0.183474] calling proc_cmdline_init+0x0/0x30 @ 1
[ 0.183522] initcall proc_cmdline_init+0x0/0x30 returned 0 after 1 usecs
[ 0.183573] calling proc_cpuinfo_init+0x0/0x30 @ 1
[ 0.183621] initcall proc_cpuinfo_init+0x0/0x30 returned 0 after 1 usecs
[ 0.183671] calling proc_devices_init+0x0/0x30 @ 1
[ 0.183719] initcall proc_devices_init+0x0/0x30 returned 0 after 0 usecs
[ 0.183769] calling proc_interrupts_init+0x0/0x30 @ 1
[ 0.183818] initcall proc_interrupts_init+0x0/0x30 returned 0 after 1 usecs
[ 0.183869] calling proc_loadavg_init+0x0/0x30 @ 1
[ 0.183917] initcall proc_loadavg_init+0x0/0x30 returned 0 after 1 usecs
[ 0.183968] calling proc_meminfo_init+0x0/0x30 @ 1
[ 0.184016] initcall proc_meminfo_init+0x0/0x30 returned 0 after 0 usecs
[ 0.184066] calling proc_stat_init+0x0/0x30 @ 1
[ 0.184114] initcall proc_stat_init+0x0/0x30 returned 0 after 1 usecs
[ 0.184166] calling proc_uptime_init+0x0/0x30 @ 1
[ 0.184214] initcall proc_uptime_init+0x0/0x30 returned 0 after 1 usecs
[ 0.184267] calling proc_version_init+0x0/0x30 @ 1
[ 0.184315] initcall proc_version_init+0x0/0x30 returned 0 after 1 usecs
[ 0.184366] calling proc_kcore_init+0x0/0x50 @ 1
[ 0.184413] initcall proc_kcore_init+0x0/0x50 returned 0 after 1 usecs
[ 0.184463] calling proc_kmsg_init+0x0/0x30 @ 1
[ 0.184510] initcall proc_kmsg_init+0x0/0x30 returned 0 after 1 usecs
[ 0.184560] calling proc_page_init+0x0/0x50 @ 1
[ 0.184608] initcall proc_page_init+0x0/0x50 returned 0 after 1 usecs
[ 0.184658] calling init_devpts_fs+0x0/0x50 @ 1
[ 0.184711] initcall init_devpts_fs+0x0/0x50 returned 0 after 6 usecs
[ 0.184761] calling init_ext3_fs+0x0/0x70 @ 1
[ 0.184858] initcall init_ext3_fs+0x0/0x70 returned 0 after 49 usecs
[ 0.184908] calling journal_init+0x0/0xb0 @ 1
[ 0.185152] initcall journal_init+0x0/0xb0 returned 0 after 193 usecs
[ 0.185203] calling init_ext2_fs+0x0/0x70 @ 1
[ 0.185299] initcall init_ext2_fs+0x0/0x70 returned 0 after 46 usecs
[ 0.185350] calling init_ramfs_fs+0x0/0x20 @ 1
[ 0.185396] initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
[ 0.185446] calling init_fat_fs+0x0/0x60 @ 1
[ 0.185583] initcall init_fat_fs+0x0/0x60 returned 0 after 88 usecs
[ 0.185633] calling init_vfat_fs+0x0/0x20 @ 1
[ 0.185679] initcall init_vfat_fs+0x0/0x20 returned 0 after 1 usecs
[ 0.185729] calling init_msdos_fs+0x0/0x20 @ 1
[ 0.185776] initcall init_msdos_fs+0x0/0x20 returned 0 after 0 usecs
[ 0.185826] calling init_iso9660_fs+0x0/0x70 @ 1
[ 0.185919] initcall init_iso9660_fs+0x0/0x70 returned 0 after 45 usecs
[ 0.185970] calling init_nls_cp437+0x0/0x20 @ 1
[ 0.186016] initcall init_nls_cp437+0x0/0x20 returned 0 after 0 usecs
[ 0.186067] calling init_nls_iso8859_1+0x0/0x20 @ 1
[ 0.186114] initcall init_nls_iso8859_1+0x0/0x20 returned 0 after 0 usecs
[ 0.186168] calling init_nls_iso8859_15+0x0/0x20 @ 1
[ 0.186215] initcall init_nls_iso8859_15+0x0/0x20 returned 0 after 0 usecs
[ 0.186276] calling init_nls_utf8+0x0/0x30 @ 1
[ 0.186323] initcall init_nls_utf8+0x0/0x30 returned 0 after 1 usecs
[ 0.186373] calling init_autofs4_fs+0x0/0x30 @ 1
[ 0.186457] initcall init_autofs4_fs+0x0/0x30 returned 0 after 37 usecs
[ 0.186508] calling fuse_init+0x0/0x140 @ 1
[ 0.186553] fuse init (API version 7.11)
[ 0.186736] initcall fuse_init+0x0/0x140 returned 0 after 176 usecs
[ 0.186786] calling init_udf_fs+0x0/0x70 @ 1
[ 0.186877] initcall init_udf_fs+0x0/0x70 returned 0 after 44 usecs
[ 0.186928] calling ipc_init+0x0/0x30 @ 1
[ 0.186975] msgmni has been set to 3968
[ 0.187023] initcall ipc_init+0x0/0x30 returned 0 after 49 usecs
[ 0.187073] calling ipc_sysctl_init+0x0/0x20 @ 1
[ 0.187121] initcall ipc_sysctl_init+0x0/0x20 returned 0 after 2 usecs
[ 0.187171] calling init_mqueue_fs+0x0/0xd0 @ 1
[ 0.187286] initcall init_mqueue_fs+0x0/0xd0 returned 0 after 66 usecs
[ 0.187338] calling proc_genhd_init+0x0/0x40 @ 1
[ 0.187387] initcall proc_genhd_init+0x0/0x40 returned 0 after 2 usecs
[ 0.187437] calling noop_init+0x0/0x20 @ 1
[ 0.187482] io scheduler noop registered
[ 0.187526] initcall noop_init+0x0/0x20 returned 0 after 43 usecs
[ 0.187577] calling as_init+0x0/0x20 @ 1
[ 0.187620] io scheduler anticipatory registered
[ 0.187666] initcall as_init+0x0/0x20 returned 0 after 44 usecs
[ 0.187715] calling deadline_init+0x0/0x20 @ 1
[ 0.187761] io scheduler deadline registered
[ 0.187807] initcall deadline_init+0x0/0x20 returned 0 after 43 usecs
[ 0.187857] calling cfq_init+0x0/0xb0 @ 1
[ 0.187958] io scheduler cfq registered (default)
[ 0.188005] initcall cfq_init+0x0/0xb0 returned 0 after 101 usecs
[ 0.188055] calling percpu_counter_startup+0x0/0x20 @ 1
[ 0.188104] initcall percpu_counter_startup+0x0/0x20 returned 0 after 0 usecs
[ 0.188158] calling pci_init+0x0/0x40 @ 1
[ 0.188210] pci 0000:00:02.0: Boot video device
[ 0.188543] initcall pci_init+0x0/0x40 returned 0 after 332 usecs
[ 0.188593] calling pci_proc_init+0x0/0x70 @ 1
[ 0.188685] initcall pci_proc_init+0x0/0x70 returned 0 after 44 usecs
[ 0.188736] calling fb_console_init+0x0/0x160 @ 1
[ 0.188820] initcall fb_console_init+0x0/0x160 returned 0 after 36 usecs
[ 0.188871] calling vesafb_init+0x0/0x255 @ 1
[ 0.188989] initcall vesafb_init+0x0/0x255 returned 0 after 69 usecs
[ 0.189040] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 0.189090] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 2 usecs
[ 0.189143] calling acpi_ac_init+0x0/0x45 @ 1
[ 0.189243] initcall acpi_ac_init+0x0/0x45 returned 0 after 53 usecs
[ 0.189297] calling acpi_battery_init+0x0/0x45 @ 1
[ 0.189383] initcall acpi_battery_init+0x0/0x45 returned 0 after 37 usecs
[ 0.189434] calling acpi_button_init+0x0/0x5e @ 1
[ 0.189557] input: Power Button (FF) as /class/input/input0
[ 0.189606] ACPI: Power Button (FF) [PWRF]
[ 0.189717] input: Sleep Button (CM) as /class/input/input1
[ 0.189770] ACPI: Sleep Button (CM) [SLPB]
[ 0.189852] initcall acpi_button_init+0x0/0x5e returned 0 after 361 usecs
[ 0.189903] calling acpi_fan_init+0x0/0x32 @ 1
[ 0.189988] initcall acpi_fan_init+0x0/0x32 returned 0 after 37 usecs
[ 0.190039] calling irqrouter_init_sysfs+0x0/0x38 @ 1
[ 0.190163] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 74 usecs
[ 0.190216] calling acpi_processor_init+0x0/0x101 @ 1
[ 0.190443] processor ACPI_CPU:00: registered as cooling_device0
[ 0.190494] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.190720] processor ACPI_CPU:01: registered as cooling_device1
[ 0.190772] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.190956] initcall acpi_processor_init+0x0/0x101 returned 0 after 671 usecs
[ 0.191009] calling acpi_container_init+0x0/0x42 @ 1
[ 0.192424] initcall acpi_container_init+0x0/0x42 returned 0 after 1334 usecs
[ 0.192478] calling acpi_thermal_init+0x0/0x83 @ 1
[ 0.192580] initcall acpi_thermal_init+0x0/0x83 returned 0 after 52 usecs
[ 0.192633] calling rand_initialize+0x0/0x30 @ 1
[ 0.192694] initcall rand_initialize+0x0/0x30 returned 0 after 14 usecs
[ 0.192744] calling tty_init+0x0/0x110 @ 1
[ 0.201280] initcall tty_init+0x0/0x110 returned 0 after 8289 usecs
[ 0.201334] calling pty_init+0x0/0x2f0 @ 1
[ 0.201445] initcall pty_init+0x0/0x2f0 returned 0 after 61 usecs
[ 0.201507] calling sysrq_init+0x0/0x30 @ 1
[ 0.201557] initcall sysrq_init+0x0/0x30 returned 0 after 4 usecs
[ 0.201606] calling rtc_init+0x0/0xb0 @ 1
[ 0.201691] Real Time Clock Driver v1.12b
[ 0.201736] initcall rtc_init+0x0/0xb0 returned 0 after 83 usecs
[ 0.201786] calling hpet_init+0x0/0x80 @ 1
[ 0.201945] initcall hpet_init+0x0/0x80 returned 0 after 111 usecs
[ 0.201995] calling mod_init+0x0/0x230 @ 1
[ 0.202140] initcall mod_init+0x0/0x230 returned -19 after 98 usecs
[ 0.202190] calling agp_init+0x0/0x30 @ 1
[ 0.202234] Linux agpgart interface v0.103
[ 0.202281] initcall agp_init+0x0/0x30 returned 0 after 45 usecs
[ 0.202330] calling agp_intel_init+0x0/0x30 @ 1
[ 0.202390] agpgart-intel 0000:00:00.0: Intel 965G Chipset
[ 0.203022] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.205812] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.205922] initcall agp_intel_init+0x0/0x30 returned 0 after 3458 usecs
[ 0.205973] calling drm_core_init+0x0/0x110 @ 1
[ 0.206065] [drm] Initialized drm 1.1.0 20060810
[ 0.206112] initcall drm_core_init+0x0/0x110 returned 0 after 90 usecs
[ 0.206162] calling radeon_init+0x0/0x20 @ 1
[ 0.206924] initcall radeon_init+0x0/0x20 returned 0 after 699 usecs
[ 0.206974] calling i915_init+0x0/0x70 @ 1
[ 0.207067] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.207119] pci 0000:00:02.0: setting latency timer to 64
[ 0.219994] pci 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.220022] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 0.220114] initcall i915_init+0x0/0x70 returned 0 after 12786 usecs
[ 0.220165] calling serial8250_init+0x0/0x150 @ 1
[ 0.220211] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.220603] initcall serial8250_init+0x0/0x150 returned 0 after 381 usecs
[ 0.220655] calling serial8250_pnp_init+0x0/0x20 @ 1
[ 0.220897] initcall serial8250_pnp_init+0x0/0x20 returned 0 after 189 usecs
[ 0.220949] calling serial8250_pci_init+0x0/0x20 @ 1
[ 0.221048] initcall serial8250_pci_init+0x0/0x20 returned 0 after 51 usecs
[ 0.221102] calling topology_sysfs_init+0x0/0x60 @ 1
[ 0.221162] initcall topology_sysfs_init+0x0/0x60 returned 0 after 12 usecs
[ 0.221213] calling floppy_init+0x0/0xfb0 @ 1
[ 0.221295] Floppy drive(s): fd0 is 1.44M
[ 0.236532] FDC 0 is a National Semiconductor PC87306
[ 0.237610] initcall floppy_init+0x0/0xfb0 returned 0 after 15964 usecs
[ 0.237661] calling brd_init+0x0/0x1c0 @ 1
[ 0.239056] brd: module loaded
[ 0.239100] initcall brd_init+0x0/0x1c0 returned 0 after 1359 usecs
[ 0.239725] calling loop_init+0x0/0x1e0 @ 1
[ 0.240427] loop: module loaded
[ 0.240471] initcall loop_init+0x0/0x1e0 returned 0 after 684 usecs
[ 0.240521] calling net_olddevs_init+0x0/0xb0 @ 1
[ 0.240573] initcall net_olddevs_init+0x0/0xb0 returned 0 after 3 usecs
[ 0.240624] calling dummy_init_module+0x0/0xe0 @ 1
[ 0.240766] initcall dummy_init_module+0x0/0xe0 returned 0 after 92 usecs
[ 0.240818] calling tun_init+0x0/0xb0 @ 1
[ 0.240862] tun: Universal TUN/TAP device driver, 1.6
[ 0.240908] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.241003] initcall tun_init+0x0/0xb0 returned 0 after 136 usecs
[ 0.241053] calling init_sd+0x0/0xc0 @ 1
[ 0.241131] Driver 'sd' needs updating - please use bus_type methods
[ 0.241213] initcall init_sd+0x0/0xc0 returned 0 after 112 usecs
[ 0.241263] calling init_sr+0x0/0x60 @ 1
[ 0.241307] Driver 'sr' needs updating - please use bus_type methods
[ 0.241388] initcall init_sr+0x0/0x60 returned 0 after 78 usecs
[ 0.241437] calling init_sg+0x0/0xe0 @ 1
[ 0.241512] initcall init_sg+0x0/0xe0 returned 0 after 30 usecs
[ 0.241565] calling ahci_init+0x0/0x20 @ 1
[ 0.241629] ahci 0000:00:1f.2: version 3.0
[ 0.241642] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.241730] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[ 0.241791] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.241861] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 0.241930] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.242157] scsi0 : ahci
[ 0.242304] scsi1 : ahci
[ 0.242417] scsi2 : ahci
[ 0.242530] scsi3 : ahci
[ 0.242643] scsi4 : ahci
[ 0.242761] scsi5 : ahci
[ 0.242939] ata1: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325100 irq 25
[ 0.243007] ata2: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325180 irq 25
[ 0.243074] ata3: DUMMY
[ 0.243114] ata4: DUMMY
[ 0.243155] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 25
[ 0.243224] ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 25
[ 0.243350] calling 1_async_port_probe+0x0/0xf0 @ 535
[ 0.243354] initcall ahci_init+0x0/0x20 returned 0 after 1699 usecs
[ 0.243358] calling marvell_init+0x0/0x20 @ 1
[ 0.243379] pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.243401] pata_marvell 0000:02:00.0: setting latency timer to 64
[ 0.243620] calling 2_async_port_probe+0x0/0xf0 @ 537
[ 0.243675] scsi6 : pata_marvell
[ 0.243793] calling 3_async_port_probe+0x0/0xf0 @ 539
[ 0.243846] async_waiting @ 539
[ 0.243898] calling 4_async_port_probe+0x0/0xf0 @ 541
[ 0.243952] scsi7 : pata_marvell
[ 0.244035] async_waiting @ 541
[ 0.244056] calling 5_async_port_probe+0x0/0xf0 @ 543
[ 0.244134] calling 6_async_port_probe+0x0/0xf0 @ 545
[ 0.244137] ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
[ 0.244138] ata8: DUMMY
[ 0.244184] initcall marvell_init+0x0/0x20 returned 0 after 803 usecs
[ 0.244187] calling cdrom_init+0x0/0x10 @ 1
[ 0.244195] initcall cdrom_init+0x0/0x10 returned 0 after 5 usecs
[ 0.244197] calling ehci_hcd_init+0x0/0x80 @ 1
[ 0.244199] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.244215] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.244230] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.244232] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.244296] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.248190] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.248239] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.248251] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90325c00
[ 0.252194] calling 7_async_port_probe+0x0/0xf0 @ 548
[ 0.252338] calling 8_async_port_probe+0x0/0xf0 @ 549
[ 0.252385] async_waiting @ 549
[ 0.258677] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.258836] usb usb1: configuration #1 chosen from 1 choice
[ 0.258952] hub 1-0:1.0: USB hub found
[ 0.259001] hub 1-0:1.0: 4 ports detected
[ 0.259211] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.259271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.259274] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.259366] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.263325] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.263373] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.263385] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90325800
[ 0.273817] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.273959] usb usb2: configuration #1 chosen from 1 choice
[ 0.274075] hub 2-0:1.0: USB hub found
[ 0.274123] hub 2-0:1.0: 6 ports detected
[ 0.274315] initcall ehci_hcd_init+0x0/0x80 returned 0 after 29408 usecs
[ 0.274366] calling uhci_hcd_init+0x0/0xd0 @ 1
[ 0.274412] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.274530] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.274586] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.274589] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.274674] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.274768] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
[ 0.274916] usb usb3: configuration #1 chosen from 1 choice
[ 0.275013] hub 3-0:1.0: USB hub found
[ 0.275061] hub 3-0:1.0: 2 ports detected
[ 0.275225] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.275280] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.275283] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.275378] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.275471] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[ 0.275617] usb usb4: configuration #1 chosen from 1 choice
[ 0.275712] hub 4-0:1.0: USB hub found
[ 0.275761] hub 4-0:1.0: 2 ports detected
[ 0.275929] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.275984] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.275987] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.276083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.276170] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 0.276315] usb usb5: configuration #1 chosen from 1 choice
[ 0.276412] hub 5-0:1.0: USB hub found
[ 0.276459] hub 5-0:1.0: 2 ports detected
[ 0.276620] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.276674] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.276677] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.276768] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.276873] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 0.277016] usb usb6: configuration #1 chosen from 1 choice
[ 0.277113] hub 6-0:1.0: USB hub found
[ 0.277161] hub 6-0:1.0: 2 ports detected
[ 0.277320] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.277375] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.277378] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.277468] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.277554] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 0.277697] usb usb7: configuration #1 chosen from 1 choice
[ 0.277792] hub 7-0:1.0: USB hub found
[ 0.277842] hub 7-0:1.0: 2 ports detected
[ 0.278037] initcall uhci_hcd_init+0x0/0xd0 returned 0 after 3537 usecs
[ 0.278088] calling acm_init+0x0/0x150 @ 1
[ 0.278173] usbcore: registered new interface driver cdc_acm
[ 0.278222] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.278293] initcall acm_init+0x0/0x150 returned 0 after 155 usecs
[ 0.278343] calling usblp_init+0x0/0x20 @ 1
[ 0.278425] usbcore: registered new interface driver usblp
[ 0.278475] initcall usblp_init+0x0/0x20 returned 0 after 84 usecs
[ 0.278525] calling usb_stor_init+0x0/0x50 @ 1
[ 0.278570] Initializing USB Mass Storage driver...
[ 0.278670] usbcore: registered new interface driver usb-storage
[ 0.278720] USB Mass Storage support registered.
[ 0.278766] initcall usb_stor_init+0x0/0x50 returned 0 after 190 usecs
[ 0.278816] calling i8042_init+0x0/0x440 @ 1
[ 0.278974] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.281861] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.281911] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.281965] initcall i8042_init+0x0/0x440 returned 0 after 3025 usecs
[ 0.282020] calling mousedev_init+0x0/0x70 @ 1
[ 0.282110] mice: PS/2 mouse device common for all mice
[ 0.282159] initcall mousedev_init+0x0/0x70 returned 0 after 90 usecs
[ 0.282209] calling atkbd_init+0x0/0x30 @ 1
[ 0.282289] initcall atkbd_init+0x0/0x30 returned 0 after 33 usecs
[ 0.282342] calling psmouse_init+0x0/0x80 @ 1
[ 0.282448] initcall psmouse_init+0x0/0x80 returned 0 after 57 usecs
[ 0.282498] calling coretemp_init+0x0/0x1c0 @ 1
[ 0.282611] coretemp coretemp.0: Using relative temperature scale!
[ 0.282747] coretemp coretemp.1: Using relative temperature scale!
[ 0.282840] initcall coretemp_init+0x0/0x1c0 returned 0 after 287 usecs
[ 0.282891] calling init_ladder+0x0/0x20 @ 1
[ 0.282936] cpuidle: using governor ladder
[ 0.282984] initcall init_ladder+0x0/0x20 returned 0 after 46 usecs
[ 0.283034] calling init_menu+0x0/0x20 @ 1
[ 0.283078] cpuidle: using governor menu
[ 0.283122] initcall init_menu+0x0/0x20 returned 0 after 42 usecs
[ 0.283172] calling init_soundcore+0x0/0x70 @ 1
[ 0.283250] initcall init_soundcore+0x0/0x70 returned 0 after 31 usecs
[ 0.283301] calling alsa_sound_init+0x0/0x90 @ 1
[ 0.283365] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 0.283416] initcall alsa_sound_init+0x0/0x90 returned 0 after 66 usecs
[ 0.283467] calling alsa_timer_init+0x0/0x1a0 @ 1
[ 0.283555] initcall alsa_timer_init+0x0/0x1a0 returned 0 after 39 usecs
[ 0.283606] calling snd_hrtimer_init+0x0/0x120 @ 1
[ 0.283654] initcall snd_hrtimer_init+0x0/0x120 returned 0 after 0 usecs
[ 0.283705] calling rtctimer_init+0x0/0x130 @ 1
[ 0.283752] initcall rtctimer_init+0x0/0x130 returned 0 after 0 usecs
[ 0.283802] calling alsa_pcm_init+0x0/0x80 @ 1
[ 0.283850] initcall alsa_pcm_init+0x0/0x80 returned 0 after 2 usecs
[ 0.283900] calling snd_mem_init+0x0/0x30 @ 1
[ 0.283948] initcall snd_mem_init+0x0/0x30 returned 0 after 2 usecs
[ 0.284587] calling alsa_mixer_oss_init+0x0/0x40 @ 1
[ 0.284635] initcall alsa_mixer_oss_init+0x0/0x40 returned 0 after 0 usecs
[ 0.284687] calling alsa_pcm_oss_init+0x0/0xa0 @ 1
[ 0.284734] initcall alsa_pcm_oss_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.284785] calling alsa_seq_oss_init+0x0/0x1b0 @ 1
[ 0.284967] initcall alsa_seq_oss_init+0x0/0x1b0 returned 0 after 131 usecs
[ 0.285022] calling alsa_seq_init+0x0/0x60 @ 1
[ 0.285119] initcall alsa_seq_init+0x0/0x60 returned 0 after 42 usecs
[ 0.285170] calling alsa_seq_device_init+0x0/0x60 @ 1
[ 0.285219] initcall alsa_seq_device_init+0x0/0x60 returned 0 after 1 usecs
[ 0.285271] calling alsa_seq_midi_event_init+0x0/0x10 @ 1
[ 0.285319] initcall alsa_seq_midi_event_init+0x0/0x10 returned 0 after 0 usecs
[ 0.285386] calling patch_realtek_init+0x0/0x20 @ 1
[ 0.285434] initcall patch_realtek_init+0x0/0x20 returned 0 after 0 usecs
[ 0.285485] calling patch_cmedia_init+0x0/0x20 @ 1
[ 0.285532] initcall patch_cmedia_init+0x0/0x20 returned 0 after 0 usecs
[ 0.285583] calling patch_analog_init+0x0/0x20 @ 1
[ 0.285630] initcall patch_analog_init+0x0/0x20 returned 0 after 0 usecs
[ 0.285681] calling patch_sigmatel_init+0x0/0x20 @ 1
[ 0.285728] initcall patch_sigmatel_init+0x0/0x20 returned 0 after 0 usecs
[ 0.285780] calling patch_si3054_init+0x0/0x20 @ 1
[ 0.285827] initcall patch_si3054_init+0x0/0x20 returned 0 after 0 usecs
[ 0.285879] calling patch_atihdmi_init+0x0/0x20 @ 1
[ 0.285926] initcall patch_atihdmi_init+0x0/0x20 returned 0 after 0 usecs
[ 0.285984] calling patch_conexant_init+0x0/0x20 @ 1
[ 0.286031] initcall patch_conexant_init+0x0/0x20 returned 0 after 0 usecs
[ 0.286082] calling patch_via_init+0x0/0x20 @ 1
[ 0.286129] initcall patch_via_init+0x0/0x20 returned 0 after 0 usecs
[ 0.286180] calling patch_intelhdmi_init+0x0/0x20 @ 1
[ 0.286228] initcall patch_intelhdmi_init+0x0/0x20 returned 0 after 0 usecs
[ 0.286280] calling alsa_card_azx_init+0x0/0x20 @ 1
[ 0.286362] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.286454] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 0.305230] input: AT Translated Set 2 keyboard as /class/input/input2
[ 0.425268] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 0.439325] input: HDA Intel Line In at Ext Rear Jack as /class/input/input3
[ 0.439444] input: HDA Intel Mic at Ext Front Jack as /class/input/input4
[ 0.439564] input: HDA Intel Mic at Ext Rear Jack as /class/input/input5
[ 0.439690] input: HDA Intel Mic at Ext Rear Jack as /class/input/input6
[ 0.439799] input: HDA Intel Line In at Ext Rear Jack as /class/input/input7
[ 0.439907] input: HDA Intel Line Out at Ext Rear Jack as /class/input/input8
[ 0.440016] input: HDA Intel HP Out at Ext Front Jack as /class/input/input9
[ 0.447803] ata7.00: configured for UDMA/33
[ 0.450121] async_waiting @ 548
[ 0.452774] initcall alsa_card_azx_init+0x0/0x20 returned 0 after 162544 usecs
[ 0.452846] calling alsa_sound_last_init+0x0/0x70 @ 1
[ 0.452894] ALSA device list:
[ 0.452938] #0: HDA Intel at 0x90320000 irq 22
[ 0.452996] initcall alsa_sound_last_init+0x0/0x70 returned 0 after 97 usecs
[ 0.453048] calling flow_cache_init+0x0/0x1f0 @ 1
[ 0.453125] initcall flow_cache_init+0x0/0x1f0 returned 0 after 29 usecs
[ 0.453177] calling nf_conntrack_standalone_init+0x0/0x20 @ 1
[ 0.453227] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.453467] initcall nf_conntrack_standalone_init+0x0/0x20 returned 0 after 233 usecs
[ 0.453537] calling xt_init+0x0/0xe0 @ 1
[ 0.453590] initcall xt_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.453640] calling tcpudp_mt_init+0x0/0x20 @ 1
[ 0.453687] initcall tcpudp_mt_init+0x0/0x20 returned 0 after 1 usecs
[ 0.453738] calling state_mt_init+0x0/0x20 @ 1
[ 0.453784] initcall state_mt_init+0x0/0x20 returned 0 after 0 usecs
[ 0.453835] calling sysctl_ipv4_init+0x0/0x60 @ 1
[ 0.453888] initcall sysctl_ipv4_init+0x0/0x60 returned 0 after 7 usecs
[ 0.453940] calling xfrm4_beet_init+0x0/0x20 @ 1
[ 0.453986] initcall xfrm4_beet_init+0x0/0x20 returned 0 after 0 usecs
[ 0.454037] calling xfrm4_transport_init+0x0/0x20 @ 1
[ 0.454084] initcall xfrm4_transport_init+0x0/0x20 returned 0 after 0 usecs
[ 0.454135] calling xfrm4_mode_tunnel_init+0x0/0x20 @ 1
[ 0.454183] initcall xfrm4_mode_tunnel_init+0x0/0x20 returned 0 after 0 usecs
[ 0.454237] calling ipv4_netfilter_init+0x0/0x20 @ 1
[ 0.454285] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
[ 0.454336] calling nf_conntrack_l3proto_ipv4_init+0x0/0x170 @ 1
[ 0.454404] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x170 returned 0 after 17 usecs
[ 0.454473] calling nf_defrag_init+0x0/0x20 @ 1
[ 0.454519] initcall nf_defrag_init+0x0/0x20 returned 0 after 0 usecs
[ 0.454569] calling ip_tables_init+0x0/0xc0 @ 1
[ 0.454622] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.454669] initcall ip_tables_init+0x0/0xc0 returned 0 after 50 usecs
[ 0.454720] calling iptable_filter_init+0x0/0x80 @ 1
[ 0.454774] initcall iptable_filter_init+0x0/0x80 returned 0 after 7 usecs
[ 0.454825] calling ip_queue_init+0x0/0x150 @ 1
[ 0.454881] initcall ip_queue_init+0x0/0x150 returned 0 after 9 usecs
[ 0.454931] calling inet_diag_init+0x0/0x70 @ 1
[ 0.454980] initcall inet_diag_init+0x0/0x70 returned 0 after 2 usecs
[ 0.455030] calling tcp_diag_init+0x0/0x20 @ 1
[ 0.455076] initcall tcp_diag_init+0x0/0x20 returned 0 after 0 usecs
[ 0.455126] calling cubictcp_register+0x0/0x80 @ 1
[ 0.455172] TCP cubic registered
[ 0.455215] initcall cubictcp_register+0x0/0x80 returned 0 after 41 usecs
[ 0.455266] calling packet_init+0x0/0x50 @ 1
[ 0.455312] NET: Registered protocol family 17
[ 0.455359] initcall packet_init+0x0/0x50 returned 0 after 46 usecs
[ 0.455409] calling ipsec_pfkey_init+0x0/0x90 @ 1
[ 0.455455] NET: Registered protocol family 15
[ 0.455504] initcall ipsec_pfkey_init+0x0/0x90 returned 0 after 47 usecs
[ 0.455556] calling hpet_insert_resource+0x0/0x30 @ 1
[ 0.455609] initcall hpet_insert_resource+0x0/0x30 returned 0 after 1 usecs
[ 0.455660] calling update_mp_table+0x0/0x530 @ 1
[ 0.455707] initcall update_mp_table+0x0/0x530 returned 0 after 0 usecs
[ 0.455758] calling lapic_insert_resource+0x0/0x50 @ 1
[ 0.455806] initcall lapic_insert_resource+0x0/0x50 returned 0 after 0 usecs
[ 0.455858] calling init_lapic_nmi_sysfs+0x0/0x40 @ 1
[ 0.455905] initcall init_lapic_nmi_sysfs+0x0/0x40 returned 0 after 0 usecs
[ 0.455957] calling ioapic_insert_resources+0x0/0x60 @ 1
[ 0.456006] initcall ioapic_insert_resources+0x0/0x60 returned 0 after 0 usecs
[ 0.456074] calling io_apic_bug_finalize+0x0/0x20 @ 1
[ 0.456121] initcall io_apic_bug_finalize+0x0/0x20 returned 0 after 0 usecs
[ 0.456173] calling check_early_ioremap_leak+0x0/0x70 @ 1
[ 0.456221] initcall check_early_ioremap_leak+0x0/0x70 returned 0 after 0 usecs
[ 0.456289] calling pat_memtype_list_init+0x0/0x30 @ 1
[ 0.456341] initcall pat_memtype_list_init+0x0/0x30 returned 0 after 3 usecs
[ 0.456392] calling sched_init_debug+0x0/0x30 @ 1
[ 0.456442] initcall sched_init_debug+0x0/0x30 returned 0 after 3 usecs
[ 0.456494] calling init_oops_id+0x0/0x40 @ 1
[ 0.456544] initcall init_oops_id+0x0/0x40 returned 0 after 4 usecs
[ 0.456597] calling disable_boot_consoles+0x0/0x40 @ 1
[ 0.456645] initcall disable_boot_consoles+0x0/0x40 returned 0 after 0 usecs
[ 0.456698] calling pm_qos_power_init+0x0/0x90 @ 1
[ 0.456862] initcall pm_qos_power_init+0x0/0x90 returned 0 after 113 usecs
[ 0.456914] calling max_swapfiles_check+0x0/0x10 @ 1
[ 0.456962] initcall max_swapfiles_check+0x0/0x10 returned 0 after 0 usecs
[ 0.457014] calling random32_reseed+0x0/0xc0 @ 1
[ 0.457078] initcall random32_reseed+0x0/0xc0 returned 0 after 18 usecs
[ 0.457129] calling pci_sysfs_init+0x0/0x60 @ 1
[ 0.457281] initcall pci_sysfs_init+0x0/0x60 returned 0 after 102 usecs
[ 0.457332] calling acpi_wakeup_device_init+0x0/0xa0 @ 1
[ 0.457383] initcall acpi_wakeup_device_init+0x0/0xa0 returned 0 after 2 usecs
[ 0.457451] calling acpi_sleep_proc_init+0x0/0x7e @ 1
[ 0.457522] initcall acpi_sleep_proc_init+0x0/0x7e returned 0 after 18 usecs
[ 0.457574] calling seqgen_init+0x0/0x10 @ 1
[ 0.457630] initcall seqgen_init+0x0/0x10 returned 0 after 11 usecs
[ 0.457682] calling scsi_complete_async_scans+0x0/0x120 @ 1
[ 0.457731] initcall scsi_complete_async_scans+0x0/0x120 returned 0 after 0 usecs
[ 0.457799] calling memmap_init+0x0/0xb0 @ 1
[ 0.457884] initcall memmap_init+0x0/0xb0 returned 0 after 38 usecs
[ 0.457935] calling pci_mmcfg_late_insert_resources+0x0/0x180 @ 1
[ 0.457986] initcall pci_mmcfg_late_insert_resources+0x0/0x180 returned 0 after 1 usecs
[ 0.458056] calling tcp_congestion_default+0x0/0x20 @ 1
[ 0.458104] initcall tcp_congestion_default+0x0/0x20 returned 0 after 0 usecs
[ 0.506549] Switched to high resolution mode on CPU 1
[ 0.506681] Switched to high resolution mode on CPU 0
[ 0.550034] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.550091] async_waiting @ 535
[ 0.550135] async_continuing @ 535 after 0 usec
[ 0.550186] initcall 1_async_port_probe+0x0/0xf0 returned 0 after 299414 usecs
[ 0.550285] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.550340] async_waiting @ 537
[ 0.550383] async_continuing @ 537 after 0 usec
[ 0.550429] initcall 2_async_port_probe+0x0/0xf0 returned 0 after 299569 usecs
[ 0.550505] async_continuing @ 539 after 299429 usec
[ 0.550553] initcall 3_async_port_probe+0x0/0xf0 returned 0 after 299523 usecs
[ 0.550626] async_continuing @ 541 after 299314 usec
[ 0.550674] initcall 4_async_port_probe+0x0/0xf0 returned 0 after 299537 usecs
[ 0.966034] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.966575] ata5.00: ATA-7: WDC WD1600AAJS-60PSA0, 21.12M21, max UDMA/100
[ 0.966629] ata5.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 0.967055] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.967265] ata5.00: configured for UDMA/100
[ 0.967318] async_waiting @ 543
[ 0.967371] async_continuing @ 543 after 0 usec
[ 0.967509] scsi 4:0:0:0: Direct-Access ATA WDC WD1600AAJS-6 21.1 PQ: 0 ANSI: 5
[ 0.967660] calling 9_sd_probe_async+0x0/0x260 @ 541
[ 0.967816] sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 0.967898] sd 4:0:0:0: [sda] Write Protect is off
[ 0.967945] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.967967] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.968101] sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 0.968756] sd 4:0:0:0: [sda] Write Protect is off
[ 0.968808] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.968830] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.968903] sda:<5>sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 0.969032] initcall 5_async_port_probe+0x0/0xf0 returned 0 after 707981 usecs
[ 0.974288] sda1 sda2 sda3 < sda5 sda6 sda7 sda8<6>ata6.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[ 1.015548] ata6.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.029357] sda9 >
[ 1.029920] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.029968] initcall 9_sd_probe_async+0x0/0x260 returned 0 after 60798 usecs
[ 1.034291] input: ImPS/2 Logitech Wheel Mouse as /class/input/input10
[ 1.059151] async_waiting @ 1
[ 1.073797] ata6.00: configured for UDMA/133
[ 1.073851] async_waiting @ 545
[ 1.073895] async_continuing @ 545 after 0 usec
[ 1.074010] scsi 5:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
[ 1.074160] calling 10_sd_probe_async+0x0/0x260 @ 537
[ 1.074292] sd 5:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 1.074372] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.074418] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.074439] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.074556] sd 5:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 1.074635] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.074681] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.074702] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.074774] sdb:<5>sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.074886] initcall 6_async_port_probe+0x0/0xf0 returned 0 after 810567 usecs
[ 1.074961] async_continuing @ 548 after 610151 usec
[ 1.075026] isa bounce pool size: 16 pages
[ 1.078760] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.091515] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.091587] Uniform CD-ROM driver Revision: 3.20
[ 1.091768] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1.091859] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 1.091911] initcall 7_async_port_probe+0x0/0xf0 returned 0 after 819987 usecs
[ 1.091982] async_continuing @ 549 after 819878 usec
[ 1.092041] async_waiting @ 549
[ 1.092082] async_continuing @ 549 after 0 usec
[ 1.092129] initcall 8_async_port_probe+0x0/0xf0 returned 0 after 820061 usecs
[ 1.092200] async_continuing @ 1 after 32229 usec
[ 1.092246] async_waiting @ 1
[ 1.121797] sdb1 sdb2 < sdb5 >
[ 1.149968] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.150020] initcall 10_sd_probe_async+0x0/0x260 returned 0 after 74033 usecs
[ 1.150075] async_continuing @ 1 after 56433 usec
[ 1.185836] kjournald starting. Commit interval 5 seconds
[ 1.185843] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.185853] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[ 1.185873] async_waiting @ 1
[ 1.185875] async_continuing @ 1 after 0 usec
[ 1.185877] Freeing unused kernel memory: 384k freed
[ 3.166191] calling e1000_init_module+0x0/0x75 [e1000e] @ 1275
[ 3.166194] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 3.166196] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.166242] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.166250] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.166334] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 3.190832] calling rtl8139_init_module+0x0/0x2e [8139too] @ 1317
[ 3.190835] 8139too Fast Ethernet driver 0.9.28
[ 3.190869] 8139too 0000:06:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.191265] eth0: RealTek RTL8139 at 0xffffc200080ca000, 00:e0:4c:f0:a9:84, IRQ 22
[ 3.191267] eth0: Identified 8139 chip type 'RTL-8139C'
[ 3.191285] initcall rtl8139_init_module+0x0/0x2e [8139too] returned 0 after 437 usecs
[ 3.192604] udev: renamed network interface eth0 to eth1
[ 3.350299] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:00:44:f5
[ 3.350302] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.350326] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
[ 3.350367] initcall e1000_init_module+0x0/0x75 [e1000e] returned 0 after 179846 usecs
[ 3.853266] EXT3 FS on sda2, internal journal
[ 4.050098] calling vmx_init+0x0/0x290 [kvm_intel] @ 1488
[ 4.050326] initcall vmx_init+0x0/0x290 [kvm_intel] returned 0 after 216 usecs
[ 5.054551] kjournald starting. Commit interval 5 seconds
[ 5.054706] EXT3 FS on sda5, internal journal
[ 5.054711] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.081239] kjournald starting. Commit interval 5 seconds
[ 5.081715] EXT3 FS on sda6, internal journal
[ 5.081720] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.101165] kjournald starting. Commit interval 5 seconds
[ 5.101333] EXT3 FS on sda8, internal journal
[ 5.101337] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.158682] calling init_xfs_fs+0x0/0xb7 [xfs] @ 1523
[ 5.158686] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 5.159073] initcall init_xfs_fs+0x0/0xb7 [xfs] returned 0 after 365 usecs
[ 5.186724] XFS mounting filesystem sda9
[ 5.263313] Ending clean XFS mount for filesystem: sda9
[ 5.374166] Adding 995988k swap on /dev/sda7. Priority:-1 extents:1 across:995988k
[ 10.252206] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 10.303066] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 21.187766] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 21.217334] [drm:i915_initialize] *ERROR* can not ioremap virtual address for ring buffer
[ 21.217368] [drm:drm_unlock] *ERROR* Process 4087 using kernel context 0
[ 36.207478] calling nf_nat_init+0x0/0x124 [nf_nat] @ 5216
[ 36.207538] initcall nf_nat_init+0x0/0x124 [nf_nat] returned 0 after 53 usecs
[ 36.213315] calling nf_nat_standalone_init+0x0/0x8e [iptable_nat] @ 5216
[ 36.213328] initcall nf_nat_standalone_init+0x0/0x8e [iptable_nat] returned 0 after 8 usecs
[ 36.220194] calling masquerade_tg_init+0x0/0x3c [ipt_MASQUERADE] @ 5224
[ 36.220202] initcall masquerade_tg_init+0x0/0x3c [ipt_MASQUERADE] returned 0 after 3 usecs
--
Paolo Ornati
Linux 2.6.29-rc5-00206-g402a917 on x86_64
next prev parent reply other threads:[~2009-02-21 12:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-21 10:00 [BISECTED] [drm:i915_initialize] *ERROR* can not ioremap virtual address for ring buffer Paolo Ornati
2009-02-21 12:19 ` Sitsofe Wheeler
2009-02-21 12:49 ` Paolo Ornati [this message]
2009-02-21 12:52 ` Paolo Ornati
2009-02-21 13:05 ` Sitsofe Wheeler
2009-02-21 13:12 ` Sitsofe Wheeler
2009-02-21 14:57 ` [BISECTED && PACTH AVAILABLE] " Paolo Ornati
2009-02-21 15:08 ` Sitsofe Wheeler
2009-02-21 19:18 ` Paolo Ornati
2009-02-21 18:14 ` [BISECTED] " Sitsofe Wheeler
2009-02-21 19:28 ` Paolo Ornati
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090221134933.368c2709@fastwebnet.it \
--to=ornati@fastwebnet.it \
--cc=airlied@linux.ie \
--cc=eric@anholt.net \
--cc=linux-kernel@vger.kernel.org \
--cc=sitsofe@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.