From: Kim Phillips <kim.phillips@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Status open patches: 8xxx
Date: Mon, 23 Feb 2009 15:42:08 -0600 [thread overview]
Message-ID: <20090223154208.d3712e54.kim.phillips@freescale.com> (raw)
In-Reply-To: <20090222000014.08971832E43F@gemini.denx.de>
On Sun, 22 Feb 2009 01:00:14 +0100
Wolfgang Denk <wd@denx.de> wrote:
> I have the following patches still marked as open in my list. Could
> you please have a look...
>
> 8xxx:
> 11/06 Anton Vorontsov [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB
this is apparently pending resubmission from its author, Anton:
http://lists.denx.de/pipermail/u-boot/2008-November/043348.html:
"Please don't queue this patch yet. I'll send an updated version
soon, that will also define CFG_BOOTM_LEN (so that bootm command
will able to gunzip 16MB images)."
(Anton cc'd)
> 01/22 Scott Wood Re: [U-Boot] mpc8313erdb: crash in image_print_type()
this isn't a patch; it's a thread that concludes that manual relocation
is needed.
> 02/05 Valeriy Glushkov [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
this is commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5 in the
u-boot-mpc83xx tree.
> 02/16 Kim Phillips Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
I believe this is me saying I applied it to u-boot-mpc83xx, just as I
did above :).
> 02/17 Heiko Schocher [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
> 02/17 Heiko Schocher [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
> 02/17 Heiko Schocher [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.
As he already mentioned, Heiko has already resubmitted a 3rd version of
these...
> 02/19 Anton Vorontsov [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx
> 02/19 Anton Vorontsov [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
> 02/19 Anton Vorontsov [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper
> 02/19 Anton Vorontsov [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0
> 02/19 Anton Vorontsov [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
> 02/19 Anton Vorontsov [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
> 02/19 Anton Vorontsov [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value
> 02/19 Anton Vorontsov [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support
> 02/19 Heiko Schocher [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support
> 02/19 Heiko Schocher [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM
> 02/19 Heiko Schocher [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c
> 02/19 Heiko Schocher [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines
> 02/19 Heiko Schocher [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03
> 02/19 Heiko Schocher [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
> 02/19 Heiko Schocher [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.
...here. And Anton's are the latest submitted to the list and I
intend on picking them up and sending you a pull request soon.
Kim
next prev parent reply other threads:[~2009-02-23 21:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-22 0:00 [U-Boot] Status open patches: 8xxx Wolfgang Denk
2009-02-22 7:13 ` Heiko Schocher
2009-02-23 8:47 ` Pieter
2009-02-23 18:14 ` Jon Loeliger
2009-02-23 18:53 ` Becky Bruce
2009-02-23 19:58 ` Becky Bruce
2009-02-23 20:41 ` Jon Loeliger
2009-02-23 21:42 ` Kim Phillips [this message]
2009-02-23 21:58 ` Wolfgang Denk
2009-03-10 23:06 ` Andy Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090223154208.d3712e54.kim.phillips@freescale.com \
--to=kim.phillips@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.