From: Andy Isaacson <adi@hexapodia.org>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>, Eric Anholt <eric@anholt.net>,
Linus Torvalds <torvalds@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
"lenb@kernel.org" <lenb@kernel.org>, Ingo Molnar <mingo@elte.hu>,
mjg@redhat.com, Andrew Morton <akpm@linux-foundation.org>,
rui.zhang@intel.com, airlied@redhat.com
Subject: Re: [Linux 2.6.29-rc6] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page
Date: Mon, 23 Feb 2009 19:23:04 -0800 [thread overview]
Message-ID: <20090224032304.GA26344@hexapodia.org> (raw)
In-Reply-To: <86802c440902231701q1e169a67oa12bd84ac0e4c7aa@mail.gmail.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 87409 bytes --]
On Mon, Feb 23, 2009 at 05:01:10PM -0800, Yinghai Lu wrote:
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
>
> should help mtrr ones.
>
> please post bootlog with those option set.
Doesn't help here (Dell E6400).
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-rc6-dirty (adi@cvp-loaner-01) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #14 SMP Mon Feb 23 19:05:31 PST 2009
[ 0.000000] Command line: root=/dev/sda1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d04d400 (usable)
[ 0.000000] BIOS-e820: 000000007d04d400 - 000000007d04f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d04f400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7d04d max_arch_pfn = 0x100000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 32GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 2012MB, range: 4MB, type UC
[ 0.000000] reg 3, base: 2016MB, range: 32MB, type UC
[ 0.000000] total RAM coverred: 32220M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 30208M
[ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: 16G
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 30212M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 16388M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 16388M
[ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 16388M
[ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 16388M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 16388M
[ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: 16388M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 29196M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 30220M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: 16396M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: 16396M
[ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 16396M
[ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 16396M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 16396M
[ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: 16396M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 28700M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 28700M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 28700M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 28M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 7 lose cover RAM: 24668M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 92M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 7 lose cover RAM: 92M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 92M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 7 lose cover RAM: 92M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 7 lose cover RAM: 16604M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 7 lose cover RAM: 220M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 7 lose cover RAM: 220M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose cover RAM: 220M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 7 lose cover RAM: 476M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 7 lose cover RAM: 476M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 7 lose cover RAM: 476M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 5 lose cover RAM: 1500M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 5 lose cover RAM: 1500M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 3 lose cover RAM: 3548M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] init_memory_mapping: 0000000000000000-000000007d04d000
[ 0.000000] 0000000000 - 007d000000 page 2M
[ 0.000000] 007d000000 - 007d04d000 page 4k
[ 0.000000] kernel direct mapping tables up to 7d04d000 @ 8000-c000
[ 0.000000] last_map_addr: 7d04d000 end: 7d04d000
[ 0.000000] RAMDISK: 37c4b000 - 37fefdc3
[ 0.000000] ACPI: RSDP 000FB9C0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 7D051E00, 006C (r1 DELL M09 27D80C11 ASL 61)
[ 0.000000] ACPI: FACP 7D051C9C, 00F4 (r4 DELL M09 27D80C11 ASL 61)
[ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 128/64 [20081204]
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7D052400, 6A2B (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 7D060C00, 0040
[ 0.000000] ACPI: HPET 7D051F00, 0038 (r1 DELL M09 1 ASL 61)
[ 0.000000] ACPI: ____ 7D060400, 0030 (r1 DELL M09 27D80C11 ASL 61)
[ 0.000000] ACPI: APIC 7D052000, 0068 (r1 DELL M09 27D80C11 ASL 47)
[ 0.000000] ACPI: ASF! 7D051C00, 006A (r32 DELL M09 27D80C11 ASL 61)
[ 0.000000] ACPI: MCFG 7D051FC0, 003E (r16 DELL M09 27D80C11 ASL 61)
[ 0.000000] ACPI: TCPA 7D052300, 0032 (r1 0 ASL 0)
[ 0.000000] ACPI: SLIC 7D05209C, 0176 (r1 DELL M09 27D80C11 ASL 61)
[ 0.000000] ACPI: SSDT 7D05032D, 066C (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007d04d000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007d04d000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [000000000000a000 - 0000000000019a0f] pages 10
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007d04d000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000bcdcd8] TEXT DATA BSS ==> [0000200000 - 0000bcdcd8]
[ 0.000000] #3 [0037c4b000 - 0037fefdc3] RAMDISK ==> [0037c4b000 - 0037fefdc3]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007d04d
[ 0.000000] On node 0 totalpages: 511980
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2611 pages reserved
[ 0.000000] DMA zone: 1332 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6946 pages used for memmap
[ 0.000000] DMA32 zone: 501035 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502367
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.874 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2005104k/2048308k available (4737k kernel code, 388k absent, 42816k reserved, 3114k data, 640k init)
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.74 BogoMIPS (lpj=10107496)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Initializing.
[ 0.004000] SELinux: Starting in permissive mode
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004172] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004925] Mount-cache hash table entries: 256
[ 0.005187] Initializing cgroup subsys ns
[ 0.005301] Initializing cgroup subsys cpuacct
[ 0.005432] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005584] CPU: L2 cache: 6144K
[ 0.005694] [ds] using Core 2/Atom configuration
[ 0.005807] CPU 0/0x0 -> Node 0
[ 0.005918] CPU: Physical Processor ID: 0
[ 0.006029] CPU: Processor Core ID: 0
[ 0.006140] using mwait in idle threads.
[ 0.008748] ACPI: Core revision 20081204
[ 0.020056] Setting APIC routing to flat
[ 0.020718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061925] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5053.98 BogoMIPS (lpj=10107964)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.149663] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
[ 0.150905] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152092] Brought up 2 CPUs
[ 0.152200] Total of 2 processors activated (10107.73 BogoMIPS).
[ 0.152393] khelper used greatest stack depth: 5976 bytes left
[ 0.152393] net_namespace: 1784 bytes
[ 0.152393] Booting paravirtualized kernel on bare hardware
[ 0.156131] Time: 3:08:11 Date: 02/24/09
[ 0.156263] NET: Registered protocol family 16
[ 0.156389] ACPI: bus type pci registered
[ 0.156389] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.156389] PCI: MCFG area at f8000000 reserved in E820
[ 0.159051] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.160002] PCI: Using configuration type 1 for base access
[ 0.164030] bio: create slab <bio-0> at 0
[ 0.164741] ACPI: EC: Look up EC in DSDT
[ 0.164938] ACPI: BIOS _OSI(Linux) query ignored
[ 0.224019] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.225403] ACPI: Interpreter enabled
[ 0.225403] ACPI: (supports S0 S3 S4 S5)
[ 0.225403] ACPI: Using IOAPIC for interrupt routing
[ 0.336125] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.336175] ACPI: EC: driver started in interrupt mode
[ 0.337414] ACPI: No dock devices found.
[ 0.337531] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.340033] DMAR: Forcing write-buffer flush capability
[ 0.340170] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 0.340175] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.340179] pci 0000:00:02.0: reg 20 io port: [0xef98-0xef9f]
[ 0.340211] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 0.340315] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6ae0000-0xf6afffff]
[ 0.340322] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6adb000-0xf6adbfff]
[ 0.340329] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[ 0.340383] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.340497] pci 0000:00:19.0: PME# disabled
[ 0.340666] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.340753] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.340841] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.340930] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.340995] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.341109] pci 0000:00:1a.7: PME# disabled
[ 0.341109] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6adc000-0xf6adffff]
[ 0.341109] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.341109] pci 0000:00:1b.0: PME# disabled
[ 0.341109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.341109] pci 0000:00:1c.0: PME# disabled
[ 0.341109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.341109] pci 0000:00:1c.1: PME# disabled
[ 0.341109] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.341109] pci 0000:00:1c.2: PME# disabled
[ 0.341289] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.341402] pci 0000:00:1c.3: PME# disabled
[ 0.341579] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.341666] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.341754] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.341843] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.341907] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.342020] pci 0000:00:1d.7: PME# disabled
[ 0.342368] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.342375] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.342382] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.342389] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.342396] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.342403] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.342448] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.342559] pci 0000:00:1f.2: PME# disabled
[ 0.342703] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6adaf00-0xf6adafff]
[ 0.342720] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.342892] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
[ 0.343006] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.343121] pci 0000:0c:00.0: PME# disabled
[ 0.343303] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 0.343422] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
[ 0.343426] pci 0000:00:1c.3: bridge 32bit mmio: [0xf6600000-0xf68fffff]
[ 0.343433] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.343476] pci 0000:03:01.0: reg 10 32bit mmio: [0xf65ff800-0xf65fffff]
[ 0.343532] pci 0000:03:01.0: supports D1 D2
[ 0.343533] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343647] pci 0000:03:01.0: PME# disabled
[ 0.343792] pci 0000:03:01.1: reg 10 32bit mmio: [0xf65ff600-0xf65ff6ff]
[ 0.343849] pci 0000:03:01.1: supports D1 D2
[ 0.343851] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343965] pci 0000:03:01.1: PME# disabled
[ 0.344041] pci 0000:03:01.2: reg 10 32bit mmio: [0xf65ff700-0xf65ff7ff]
[ 0.344098] pci 0000:03:01.2: supports D1 D2
[ 0.344100] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.344213] pci 0000:03:01.2: PME# disabled
[ 0.344385] pci 0000:00:1e.0: transparent bridge
[ 0.344498] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6500000-0xf65fffff]
[ 0.344538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.344837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.344949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.345019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.345088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.345156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.360662] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.360662] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 0.360662] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.360957] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.361433] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.362153] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.362873] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.363580] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.368027] SCSI subsystem initialized
[ 0.368114] libata version 3.00 loaded.
[ 0.368114] usbcore: registered new interface driver usbfs
[ 0.368136] usbcore: registered new interface driver hub
[ 0.368136] usbcore: registered new device driver usb
[ 0.368136] PCI: Using ACPI for IRQ routing
[ 0.380006] Bluetooth: Core ver 2.14
[ 0.380115] NET: Registered protocol family 31
[ 0.380115] Bluetooth: HCI device and connection manager initialized
[ 0.380225] Bluetooth: HCI socket layer initialized
[ 0.396033] cfg80211: Using static regulatory domain info
[ 0.396114] cfg80211: Regulatory domain: US
[ 0.396221] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.396393] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.396505] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.396616] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.396727] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.396837] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.396949] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.397060] cfg80211: Calling CRDA for country: US
[ 0.400007] NetLabel: Initializing
[ 0.400111] NetLabel: domain hash size = 128
[ 0.400219] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.400336] NetLabel: unlabeled traffic allowed by default
[ 0.400458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.400458] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.423148] pnp: PnP ACPI init
[ 0.423259] ACPI: bus type pnp registered
[ 0.503151] Switched to high resolution mode on CPU 1
[ 0.504006] Switched to high resolution mode on CPU 0
[ 0.507089] pnp: PnP ACPI: found 14 devices
[ 0.507197] ACPI: ACPI bus type pnp unregistered
[ 0.507312] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.507423] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.507537] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.507652] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 0.507763] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.507877] system 00:0b: ioport range 0x900-0x92f has been reserved
[ 0.507988] system 00:0b: ioport range 0x931-0x933 has been reserved
[ 0.508098] system 00:0b: ioport range 0x935-0x97f has been reserved
[ 0.508209] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.508320] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 0.508431] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 0.508546] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 0.508657] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 0.508767] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 0.508879] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 0.508990] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 0.509106] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 0.509217] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 0.509328] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 0.509442] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 0.509553] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.509665] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.509775] system 00:0d: iomem range 0xe0000-0xfffff has been reserved
[ 0.509888] system 00:0d: iomem range 0x100000-0x7d04d3ff could not be reserved
[ 0.510060] system 00:0d: iomem range 0x7d04d400-0x7dafffff could not be reserved
[ 0.510232] system 00:0d: iomem range 0x7db00000-0x7dbfffff has been reserved
[ 0.510343] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.510515] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.510626] system 00:0d: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 0.510738] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.510850] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.510961] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.511074] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.511186] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.511297] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.511410] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.511522] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.511634] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.511746] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.516792] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.516902] pci 0000:00:1c.0: IO window: disabled
[ 0.517019] pci 0000:00:1c.0: MEM window: disabled
[ 0.517129] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.517244] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.517354] pci 0000:00:1c.1: IO window: disabled
[ 0.517466] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 0.517578] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.517693] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[ 0.517802] pci 0000:00:1c.2: IO window: disabled
[ 0.517914] pci 0000:00:1c.2: MEM window: disabled
[ 0.518024] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.518138] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
[ 0.518250] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.518363] pci 0000:00:1c.3: MEM window: 0xf6600000-0xf68fffff
[ 0.518476] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.520435] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.520544] pci 0000:00:1e.0: IO window: disabled
[ 0.520655] pci 0000:00:1e.0: MEM window: 0xf6500000-0xf65fffff
[ 0.520767] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.520890] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.521009] pci 0000:00:1c.0: setting latency timer to 64
[ 0.521018] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.521131] pci 0000:00:1c.1: setting latency timer to 64
[ 0.521139] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.521252] pci 0000:00:1c.2: setting latency timer to 64
[ 0.521260] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.521373] pci 0000:00:1c.3: setting latency timer to 64
[ 0.521381] pci 0000:00:1e.0: setting latency timer to 64
[ 0.521384] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.521386] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.521388] pci_bus 0000:0b: resource 0 mem: [0x0-0x0]
[ 0.521390] pci_bus 0000:0b: resource 1 mem: [0x0-0x0]
[ 0.521391] pci_bus 0000:0b: resource 2 mem: [0x0-0x0]
[ 0.521393] pci_bus 0000:0b: resource 3 mem: [0x0-0x0]
[ 0.521394] pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
[ 0.521396] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 0.521397] pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
[ 0.521399] pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
[ 0.521400] pci_bus 0000:0d: resource 0 mem: [0x0-0x0]
[ 0.521402] pci_bus 0000:0d: resource 1 mem: [0x0-0x0]
[ 0.521403] pci_bus 0000:0d: resource 2 mem: [0x0-0x0]
[ 0.521405] pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
[ 0.521407] pci_bus 0000:0e: resource 0 io: [0xd000-0xdfff]
[ 0.521408] pci_bus 0000:0e: resource 1 mem: [0xf6600000-0xf68fffff]
[ 0.521410] pci_bus 0000:0e: resource 2 mem: [0xf0000000-0xf01fffff]
[ 0.521412] pci_bus 0000:0e: resource 3 mem: [0x0-0x0]
[ 0.521413] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.521415] pci_bus 0000:03: resource 1 mem: [0xf6500000-0xf65fffff]
[ 0.521417] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.521418] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.521420] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.521441] NET: Registered protocol family 2
[ 0.569083] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.569770] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.571425] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.571996] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.572108] TCP reno registered
[ 0.581082] NET: Registered protocol family 1
[ 0.581291] checking if image is initramfs... it is
[ 0.841421] Freeing initrd memory: 3731k freed
[ 0.842901] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.843293] audit: initializing netlink socket (disabled)
[ 0.843411] type=2000 audit(1235444891.841:1): initialized
[ 0.850847] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.853177] VFS: Disk quotas dquot_6.5.2
[ 0.853356] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.854252] msgmni has been set to 3923
[ 0.854454] SELinux: Registering netfilter hooks
[ 0.854774] alg: No test for stdrng (krng)
[ 0.854977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.855148] io scheduler noop registered
[ 0.855255] io scheduler anticipatory registered
[ 0.855361] io scheduler deadline registered
[ 0.855568] io scheduler cfq registered (default)
[ 0.855686] pci 0000:00:02.0: Boot video device
[ 0.855696] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.855697] pci 0000:00:1a.0: Performing full reset
[ 0.855716] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.855717] pci 0000:00:1a.1: Performing full reset
[ 0.855736] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.855737] pci 0000:00:1a.2: Performing full reset
[ 0.855786] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.855787] pci 0000:00:1d.0: Performing full reset
[ 0.855804] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.855806] pci 0000:00:1d.1: Performing full reset
[ 0.855824] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.855826] pci 0000:00:1d.2: Performing full reset
[ 0.855961] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.856067] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.856251] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.856323] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.856490] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.856561] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.856733] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.856804] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.857108] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.857798] ACPI: SSDT 7D050999, 0281 (r1 PmRef BspIst 3000 INTL 20050624)
[ 0.858433] ACPI: SSDT 7D050DF1, 05C6 (r1 PmRef BspCst 3001 INTL 20050624)
[ 0.858997] Monitor-Mwait will be used to enter C-1 state
[ 0.859002] Monitor-Mwait will be used to enter C-2 state
[ 0.859006] Monitor-Mwait will be used to enter C-3 state
[ 0.859049] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.859361] processor ACPI_CPU:00: registered as cooling_device0
[ 0.859471] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.860111] ACPI: SSDT 7D050C1A, 01D7 (r1 PmRef ApIst 3000 INTL 20050624)
[ 0.860676] ACPI: SSDT 7D0513B7, 008D (r1 PmRef ApCst 3000 INTL 20050624)
[ 0.861335] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.861640] processor ACPI_CPU:01: registered as cooling_device1
[ 0.861750] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.884934] XENFS: not registering filesystem on non-xen platform
[ 0.887429] Non-volatile memory driver v1.3
[ 0.887536] Linux agpgart interface v0.103
[ 0.887657] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.889703] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 0.893465] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.893669] [drm] Initialized drm 1.1.0 20060810
[ 0.893835] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.893947] pci 0000:00:02.0: setting latency timer to 64
[ 0.906728] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 0.906904] [drm] MTRR allocation failed
[ 0.906904] . Graphics performance may suffer.
[ 0.907130] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 0.907143] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 0.907267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.160282] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.160768] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.162287] brd: module loaded
[ 1.162457] console [netcon0] enabled
[ 1.162564] netconsole: network logging started
[ 1.162726] Loading iSCSI transport class v2.0-870.
[ 1.163017] Driver 'sd' needs updating - please use bus_type methods
[ 1.163154] Driver 'sr' needs updating - please use bus_type methods
[ 1.163345] ahci 0000:00:1f.2: version 3.0
[ 1.163358] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.163499] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.163556] ahci: SSS flag set, parallel bus scan disabled
[ 1.163698] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.163871] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[ 1.164053] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.164362] scsi0 : ahci
[ 1.164601] scsi1 : ahci
[ 1.164800] scsi2 : ahci
[ 1.164994] scsi3 : ahci
[ 1.165197] scsi4 : ahci
[ 1.165401] scsi5 : ahci
[ 1.166028] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 29
[ 1.166202] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 29
[ 1.166375] ata3: DUMMY
[ 1.166479] ata4: DUMMY
[ 1.166584] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 29
[ 1.166758] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 29
[ 1.648012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.650383] ata1.00: ATA-8: ST9160414ASG, DEC5, max UDMA/133
[ 1.650493] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.653424] ata1.00: configured for UDMA/133
[ 1.668092] scsi 0:0:0:0: Direct-Access ATA ST9160414ASG DEC5 PQ: 0 ANSI: 5
[ 1.668410] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 1.668594] sd 0:0:0:0: [sda] Write Protect is off
[ 1.668702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.668722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.668940] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 1.669122] sd 0:0:0:0: [sda] Write Protect is off
[ 1.669230] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.669250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.669426] sda: sda1 sda2 < sda5 >
[ 1.723025] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.723213] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.204012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.208159] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-U20N, A101, max UDMA/133
[ 2.212968] ata2.00: configured for UDMA/133
[ 2.230944] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-U20N A101 PQ: 0 ANSI: 5
[ 2.242192] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.242366] Uniform CD-ROM driver Revision: 3.20
[ 2.242598] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.242671] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.560014] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.896013] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.912145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.912257] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 2.912279] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.912399] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.912402] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.912559] drivers/usb/core/inode.c: creating file 'devices'
[ 2.912563] drivers/usb/core/inode.c: creating file '001'
[ 2.912606] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.912785] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 2.912789] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 2.912803] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[ 2.916680] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.916792] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.916794] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 2.916805] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 2.916916] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.920791] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.932009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.932148] usb usb1: default language 0x0409
[ 2.932154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.932265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.932436] usb usb1: Product: EHCI Host Controller
[ 2.932544] usb usb1: Manufacturer: Linux 2.6.29-rc6-dirty ehci_hcd
[ 2.932655] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.932789] usb usb1: uevent
[ 2.932821] usb usb1: usb_probe_device
[ 2.932823] usb usb1: configuration #1 chosen from 1 choice
[ 2.932936] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.932950] usb 1-0:1.0: uevent
[ 2.932981] hub 1-0:1.0: usb_probe_interface
[ 2.932983] hub 1-0:1.0: usb_probe_interface - got id
[ 2.932985] hub 1-0:1.0: USB hub found
[ 2.933097] hub 1-0:1.0: 6 ports detected
[ 2.933203] hub 1-0:1.0: standalone hub
[ 2.933204] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.933205] hub 1-0:1.0: individual port over-current protection
[ 2.933207] hub 1-0:1.0: power on to power good time: 20ms
[ 2.933211] hub 1-0:1.0: local power source is good
[ 2.933213] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.933306] drivers/usb/core/inode.c: creating file '001'
[ 2.933374] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.933494] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.933497] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.933644] drivers/usb/core/inode.c: creating file '002'
[ 2.933693] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.933870] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 2.933874] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 2.933886] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
[ 2.937768] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.937879] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.937881] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 2.937891] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 2.938002] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.941878] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.952006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.952128] usb usb2: default language 0x0409
[ 2.952134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.952245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.952417] usb usb2: Product: EHCI Host Controller
[ 2.952525] usb usb2: Manufacturer: Linux 2.6.29-rc6-dirty ehci_hcd
[ 2.952635] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.952770] usb usb2: uevent
[ 2.952800] usb usb2: usb_probe_device
[ 2.952802] usb usb2: configuration #1 chosen from 1 choice
[ 2.952914] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.952926] usb 2-0:1.0: uevent
[ 2.952955] hub 2-0:1.0: usb_probe_interface
[ 2.952957] hub 2-0:1.0: usb_probe_interface - got id
[ 2.952958] hub 2-0:1.0: USB hub found
[ 2.953069] hub 2-0:1.0: 6 ports detected
[ 2.953175] hub 2-0:1.0: standalone hub
[ 2.953177] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.953178] hub 2-0:1.0: individual port over-current protection
[ 2.953180] hub 2-0:1.0: power on to power good time: 20ms
[ 2.953183] hub 2-0:1.0: local power source is good
[ 2.953184] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.953246] drivers/usb/core/inode.c: creating file '001'
[ 2.953326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.953436] ohci_hcd: block sizes: ed 80 td 96
[ 2.953468] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.953642] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.953759] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.953762] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.953907] drivers/usb/core/inode.c: creating file '003'
[ 2.953950] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.954128] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.954240] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.954242] uhci_hcd 0000:00:1a.0: Performing full reset
[ 2.954256] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 2.954260] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 2.954393] usb usb3: default language 0x0409
[ 2.954399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.954509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.954680] usb usb3: Product: UHCI Host Controller
[ 2.954788] usb usb3: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd
[ 2.954897] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.955031] usb usb3: uevent
[ 2.955062] usb usb3: usb_probe_device
[ 2.955063] usb usb3: configuration #1 chosen from 1 choice
[ 2.955175] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.955192] usb 3-0:1.0: uevent
[ 2.955222] hub 3-0:1.0: usb_probe_interface
[ 2.955224] hub 3-0:1.0: usb_probe_interface - got id
[ 2.955225] hub 3-0:1.0: USB hub found
[ 2.955336] hub 3-0:1.0: 2 ports detected
[ 2.955442] hub 3-0:1.0: standalone hub
[ 2.955443] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.955445] hub 3-0:1.0: individual port over-current protection
[ 2.955446] hub 3-0:1.0: power on to power good time: 2ms
[ 2.955450] hub 3-0:1.0: local power source is good
[ 2.955451] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.955499] drivers/usb/core/inode.c: creating file '001'
[ 2.955567] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.955682] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.955685] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.955831] drivers/usb/core/inode.c: creating file '004'
[ 2.955880] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.956070] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.956181] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.956182] uhci_hcd 0000:00:1a.1: Performing full reset
[ 2.956197] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 2.956207] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 2.956340] usb usb4: default language 0x0409
[ 2.956345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.958235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.958406] usb usb4: Product: UHCI Host Controller
[ 2.958514] usb usb4: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd
[ 2.958623] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.958757] usb usb4: uevent
[ 2.958789] usb usb4: usb_probe_device
[ 2.958790] usb usb4: configuration #1 chosen from 1 choice
[ 2.958902] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.958914] usb 4-0:1.0: uevent
[ 2.958942] hub 4-0:1.0: usb_probe_interface
[ 2.958944] hub 4-0:1.0: usb_probe_interface - got id
[ 2.958945] hub 4-0:1.0: USB hub found
[ 2.959054] hub 4-0:1.0: 2 ports detected
[ 2.959161] hub 4-0:1.0: standalone hub
[ 2.959162] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.959163] hub 4-0:1.0: individual port over-current protection
[ 2.959165] hub 4-0:1.0: power on to power good time: 2ms
[ 2.959168] hub 4-0:1.0: local power source is good
[ 2.959169] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.959217] drivers/usb/core/inode.c: creating file '001'
[ 2.959283] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.959397] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.959400] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.959542] drivers/usb/core/inode.c: creating file '005'
[ 2.959586] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.959762] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 2.959872] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.959873] uhci_hcd 0000:00:1a.2: Performing full reset
[ 2.959887] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 2.959891] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 2.960031] usb usb5: default language 0x0409
[ 2.960036] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.960147] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.960317] usb usb5: Product: UHCI Host Controller
[ 2.960424] usb usb5: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd
[ 2.960534] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.960666] usb usb5: uevent
[ 2.960696] usb usb5: usb_probe_device
[ 2.960698] usb usb5: configuration #1 chosen from 1 choice
[ 2.960809] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.960822] usb 5-0:1.0: uevent
[ 2.960852] hub 5-0:1.0: usb_probe_interface
[ 2.960854] hub 5-0:1.0: usb_probe_interface - got id
[ 2.960855] hub 5-0:1.0: USB hub found
[ 2.960964] hub 5-0:1.0: 2 ports detected
[ 2.961071] hub 5-0:1.0: standalone hub
[ 2.961072] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.961073] hub 5-0:1.0: individual port over-current protection
[ 2.961075] hub 5-0:1.0: power on to power good time: 2ms
[ 2.961078] hub 5-0:1.0: local power source is good
[ 2.961080] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.961128] drivers/usb/core/inode.c: creating file '001'
[ 2.961197] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.961311] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.961314] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.961459] drivers/usb/core/inode.c: creating file '006'
[ 2.961509] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.961686] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.961797] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.961799] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.961813] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.961816] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 2.961953] usb usb6: default language 0x0409
[ 2.961959] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.962070] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.962240] usb usb6: Product: UHCI Host Controller
[ 2.962348] usb usb6: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd
[ 2.962458] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.962594] usb usb6: uevent
[ 2.962629] usb usb6: usb_probe_device
[ 2.962631] usb usb6: configuration #1 chosen from 1 choice
[ 2.962742] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 2.962753] usb 6-0:1.0: uevent
[ 2.962786] hub 6-0:1.0: usb_probe_interface
[ 2.962787] hub 6-0:1.0: usb_probe_interface - got id
[ 2.962789] hub 6-0:1.0: USB hub found
[ 2.962899] hub 6-0:1.0: 2 ports detected
[ 2.963006] hub 6-0:1.0: standalone hub
[ 2.963007] hub 6-0:1.0: no power switching (usb 1.0)
[ 2.963009] hub 6-0:1.0: individual port over-current protection
[ 2.963010] hub 6-0:1.0: power on to power good time: 2ms
[ 2.963013] hub 6-0:1.0: local power source is good
[ 2.963015] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 2.963063] drivers/usb/core/inode.c: creating file '001'
[ 2.963132] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.963248] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.963251] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.963398] drivers/usb/core/inode.c: creating file '007'
[ 2.963444] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.963619] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.963730] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.963732] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.963746] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 2.963750] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 2.963888] usb usb7: default language 0x0409
[ 2.963893] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.964009] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.964180] usb usb7: Product: UHCI Host Controller
[ 2.964287] usb usb7: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd
[ 2.964396] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.964532] usb usb7: uevent
[ 2.964565] usb usb7: usb_probe_device
[ 2.964566] usb usb7: configuration #1 chosen from 1 choice
[ 2.964678] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 2.964689] usb 7-0:1.0: uevent
[ 2.964722] hub 7-0:1.0: usb_probe_interface
[ 2.964723] hub 7-0:1.0: usb_probe_interface - got id
[ 2.964725] hub 7-0:1.0: USB hub found
[ 2.964835] hub 7-0:1.0: 2 ports detected
[ 2.964941] hub 7-0:1.0: standalone hub
[ 2.964943] hub 7-0:1.0: no power switching (usb 1.0)
[ 2.964944] hub 7-0:1.0: individual port over-current protection
[ 2.964946] hub 7-0:1.0: power on to power good time: 2ms
[ 2.964949] hub 7-0:1.0: local power source is good
[ 2.964950] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 2.965001] drivers/usb/core/inode.c: creating file '001'
[ 2.965070] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.965185] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.965188] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.965338] drivers/usb/core/inode.c: creating file '008'
[ 2.965382] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.965559] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.965669] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.965671] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.965685] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 2.965689] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 2.965827] usb usb8: default language 0x0409
[ 2.965832] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.965943] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.966115] usb usb8: Product: UHCI Host Controller
[ 2.966221] usb usb8: Manufacturer: Linux 2.6.29-rc6-dirty uhci_hcd
[ 2.966330] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.966465] usb usb8: uevent
[ 2.966498] usb usb8: usb_probe_device
[ 2.966500] usb usb8: configuration #1 chosen from 1 choice
[ 2.966609] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 2.966621] usb 8-0:1.0: uevent
[ 2.966653] hub 8-0:1.0: usb_probe_interface
[ 2.966654] hub 8-0:1.0: usb_probe_interface - got id
[ 2.966656] hub 8-0:1.0: USB hub found
[ 2.966764] hub 8-0:1.0: 2 ports detected
[ 2.966870] hub 8-0:1.0: standalone hub
[ 2.966871] hub 8-0:1.0: no power switching (usb 1.0)
[ 2.966872] hub 8-0:1.0: individual port over-current protection
[ 2.966874] hub 8-0:1.0: power on to power good time: 2ms
[ 2.966877] hub 8-0:1.0: local power source is good
[ 2.966878] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 2.966931] drivers/usb/core/inode.c: creating file '001'
[ 2.967064] usbcore: registered new interface driver usblp
[ 2.967174] Initializing USB Mass Storage driver...
[ 2.967333] usbcore: registered new interface driver usb-storage
[ 2.967442] USB Mass Storage support registered.
[ 2.967601] usbcore: registered new interface driver libusual
[ 2.967795] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.968262] i8042.c: Warning: Keylock active.
[ 2.972189] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.972300] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.972463] mice: PS/2 mouse device common for all mice
[ 2.972707] rtc_cmos 00:03: RTC can wake from S4
[ 2.972865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.973000] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.973161] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.973573] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.974001] cpuidle: using governor ladder
[ 2.974567] cpuidle: using governor menu
[ 2.974690] No iBFT detected.
[ 2.974815] Marking TSC unstable due to TSC halts in idle
[ 2.975020] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.975939] usbcore: registered new interface driver hiddev
[ 2.976095] usbcore: registered new interface driver usbhid
[ 2.976205] usbhid: v2.6:USB HID core driver
[ 2.976358] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 2.978435] modprobe used greatest stack depth: 5312 bytes left
[ 2.978996] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.979019] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.032071] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 3.032076] hub 1-0:1.0: port 1: status 0501 change 0001
[ 3.032094] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
[ 3.032098] hub 1-0:1.0: port 5: status 0501 change 0001
[ 3.032107] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
[ 3.032111] hub 1-0:1.0: port 6: status 0501 change 0001
[ 3.052068] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00
[ 3.052083] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 3.056061] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.060048] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00
[ 3.060065] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
[ 3.060086] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.064071] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.064075] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.088489] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input1
[ 3.100340] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input2
[ 3.116336] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input3
[ 3.132056] hub 1-0:1.0: state 7 ports 6 chg 0062 evt 0000
[ 3.132063] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.132363] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 3.149280] ALSA device list:
[ 3.149386] #0: HDA Intel at 0xf6adc000 irq 21
[ 3.149534] Netfilter messages via NETLINK v0.30.
[ 3.149651] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.150003] ctnetlink v0.93: registering with nfnetlink.
[ 3.150608] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.150743] TCP cubic registered
[ 3.150849] Initializing XFRM netlink socket
[ 3.151263] NET: Registered protocol family 10
[ 3.152024] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.152175] IPv6 over IPv4 tunneling driver
[ 3.152795] NET: Registered protocol family 17
[ 3.153156] RPC: Registered udp transport module.
[ 3.153264] RPC: Registered tcp transport module.
[ 3.153380] lib80211: common routines for IEEE802.11 drivers
[ 3.153489] lib80211_crypt: registered algorithm 'NULL'
[ 3.154514] registered taskstats version 1
[ 3.154735] Magic number: 13:158:109
[ 3.154845] usbmon usbmon5: hash matches
[ 3.155044] Freeing unused kernel memory: 640k freed
[ 3.155392] Write protecting the kernel read-only data: 7016k
[ 3.161844] all_generic_ide used greatest stack depth: 5296 bytes left
[ 3.189944] ehci_hcd 0000:00:1a.7: port 1 high speed
[ 3.189948] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 3.244050] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.267329] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.274349] ACPI: Thermal Zone [THM] (43 C)
[ 3.294905] usb usb3: uevent
[ 3.294920] usb 3-0:1.0: uevent
[ 3.294997] usb usb4: uevent
[ 3.295012] usb 4-0:1.0: uevent
[ 3.295090] usb usb5: uevent
[ 3.295104] usb 5-0:1.0: uevent
[ 3.295180] usb usb1: uevent
[ 3.295195] usb 1-0:1.0: uevent
[ 3.295768] usb usb6: uevent
[ 3.295783] usb 6-0:1.0: uevent
[ 3.295859] usb usb7: uevent
[ 3.295874] usb 7-0:1.0: uevent
[ 3.295953] usb usb8: uevent
[ 3.295968] usb 8-0:1.0: uevent
[ 3.296043] usb usb2: uevent
[ 3.296057] usb 2-0:1.0: uevent
[ 3.300324] ehci_hcd 0000:00:1a.7: port 1 high speed
[ 3.300328] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[ 3.376456] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
[ 3.376569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.376733] usb 1-1: uevent
[ 3.376745] usb 1-1: usb_probe_device
[ 3.376747] usb 1-1: configuration #1 chosen from 1 choice
[ 3.376952] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 3.376965] usb 1-1:1.0: uevent
[ 3.376975] hub 1-1:1.0: usb_probe_interface
[ 3.376976] hub 1-1:1.0: usb_probe_interface - got id
[ 3.376978] hub 1-1:1.0: USB hub found
[ 3.377203] hub 1-1:1.0: 2 ports detected
[ 3.377312] hub 1-1:1.0: compound device; port removable status: FF
[ 3.377313] hub 1-1:1.0: individual port power switching
[ 3.377315] hub 1-1:1.0: individual port over-current protection
[ 3.377316] hub 1-1:1.0: Single TT
[ 3.377317] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.377319] hub 1-1:1.0: power on to power good time: 100ms
[ 3.377577] hub 1-1:1.0: local power source is good
[ 3.377579] hub 1-1:1.0: enabling power on all ports
[ 3.377863] drivers/usb/core/inode.c: creating file '002'
[ 3.377897] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 3.381794] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 3.381920] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.382141] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.382259] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.382390] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 3.433195] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion
[ 3.433200] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
[ 3.433203] hub 1-0:1.0: port 5 not reset yet, waiting 50ms
[ 3.470758] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:d1:b7:92
[ 3.470932] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.471067] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1004ff-0ff
[ 3.471189] ohci1394 0000:03:01.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.477081] hub 1-1:1.0: port 1: status 0101 change 0001
[ 3.477328] hub 1-1:1.0: port 2: status 0101 change 0001
[ 3.489018] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
[ 3.489040] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 3.500010] Clocksource tsc unstable (delta = -107835430 ns)
[ 3.530036] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f65ff800-f65fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.545321] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 3.545325] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 3.577021] usb 1-1: link qh256-0001/ffff88007a9f4140 start 255 [1/0 us]
[ 3.601047] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 3.657321] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 3.657324] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 3.684507] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
[ 3.725073] PM: Starting manual resume from disk
[ 3.725181] PM: Resume from partition 8:5
[ 3.725182] PM: Checking hibernation image.
[ 3.725680] PM: Resume from disk failed.
[ 3.730659] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.769115] usb 1-6: skipped 2 descriptors after configuration
[ 3.769119] usb 1-6: skipped 6 descriptors after interface
[ 3.769122] usb 1-6: skipped 1 descriptor after endpoint
[ 3.769124] usb 1-6: skipped 8 descriptors after interface
[ 3.769736] usb 1-6: default language 0x0409
[ 3.774733] usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8
[ 3.776634] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.776744] usb 1-6: Product: Laptop_Integrated_Webcam_0.3M
[ 3.776852] usb 1-6: Manufacturer: CN0TX593724878C2013V
[ 3.776992] usb 1-6: uevent
[ 3.777468] usb 1-6: usb_probe_device
[ 3.777470] usb 1-6: configuration #1 chosen from 1 choice
[ 3.777995] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
[ 3.779988] usb 1-6:1.0: uevent
[ 3.780052] usb 1-6: adding 1-6:1.1 (config #1, interface 1)
[ 3.780076] usb 1-6:1.1: uevent
[ 3.780096] drivers/usb/core/inode.c: creating file '004'
[ 3.780144] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.780151] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.780160] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00
[ 3.780169] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 3.785317] kjournald starting. Commit interval 5 seconds
[ 3.785360] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.794907] udevd used greatest stack depth: 4912 bytes left
[ 3.909058] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 4.021054] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 4.124053] usb usb4: suspend_rh (auto-stop)
[ 4.124081] usb usb6: suspend_rh (auto-stop)
[ 4.124107] usb usb7: suspend_rh (auto-stop)
[ 4.124133] usb usb8: suspend_rh (auto-stop)
[ 4.174074] usb 5-1: skipped 1 descriptor after interface
[ 4.174078] usb 5-1: skipped 1 descriptor after interface
[ 4.181046] usb 5-1: default language 0x0409
[ 4.200074] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 4.200189] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.200307] usb 5-1: Product: 5880
[ 4.200410] usb 5-1: Manufacturer: Broadcom Corp
[ 4.200515] usb 5-1: SerialNumber: 0123456789ABCD
[ 4.200654] usb 5-1: uevent
[ 4.200664] usb 5-1: usb_probe_device
[ 4.200665] usb 5-1: configuration #0 chosen from 1 choice
[ 4.200772] usb 5-1: config 0 descriptor??
[ 4.202077] usb 5-1: adding 5-1:0.0 (config #0, interface 0)
[ 4.207080] usb 5-1:0.0: uevent
[ 4.207195] usb 5-1: adding 5-1:0.1 (config #0, interface 1)
[ 4.210078] usb 5-1:0.1: uevent
[ 4.210190] drivers/usb/core/inode.c: creating file '002'
[ 4.210231] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
[ 4.210240] hub 1-1:1.0: state 7 ports 2 chg 0006 evt 0000
[ 4.210379] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 4.224239] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 4.296246] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 4.323901] runlevel used greatest stack depth: 3608 bytes left
[ 4.368054] usb usb3: suspend_rh (auto-stop)
[ 4.388484] usb 1-1.1: skipped 2 descriptors after interface
[ 4.388488] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8149
[ 4.388605] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.388813] usb 1-1.1: uevent
[ 4.388820] usb 1-1.1: usb_probe_device
[ 4.388822] usb 1-1.1: configuration #1 chosen from 1 choice
[ 4.389108] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 4.389128] usb 1-1.1:1.0: uevent
[ 4.389148] drivers/usb/core/inode.c: creating file '005'
[ 4.389359] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 4.404239] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 4.477239] usb 1-1.2: new full speed USB device using ehci_hcd and address 6
[ 4.573046] usb 1-1.2: ep0 maxpacket = 8
[ 4.574585] usb 1-1.2: default language 0x0409
[ 4.574968] usb 1-1.2: New USB device found, idVendor=0a5c, idProduct=4500
[ 4.575085] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.575263] usb 1-1.2: Product: BCM2046B1
[ 4.575368] usb 1-1.2: Manufacturer: Broadcom
[ 4.575502] usb 1-1.2: uevent
[ 4.575510] usb 1-1.2: usb_probe_device
[ 4.575512] usb 1-1.2: configuration #1 chosen from 1 choice
[ 4.575719] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 4.575742] usb 1-1.2:1.0: uevent
[ 4.575758] hub 1-1.2:1.0: usb_probe_interface
[ 4.575760] hub 1-1.2:1.0: usb_probe_interface - got id
[ 4.575763] hub 1-1.2:1.0: USB hub found
[ 4.575968] hub 1-1.2:1.0: 3 ports detected
[ 4.576110] hub 1-1.2:1.0: compound device; port removable status: FFF
[ 4.576112] hub 1-1.2:1.0: ganged power switching
[ 4.576113] hub 1-1.2:1.0: global over-current protection
[ 4.576114] hub 1-1.2:1.0: power on to power good time: 100ms
[ 4.576359] hub 1-1.2:1.0: local power source is good
[ 4.576361] hub 1-1.2:1.0: no over-current condition exists
[ 4.576364] hub 1-1.2:1.0: enabling power on all ports
[ 4.576756] drivers/usb/core/inode.c: creating file '006'
[ 4.576797] hub 1-1:1.0: state 7 ports 2 chg 0000 evt 0004
[ 4.647200] mount used greatest stack depth: 3520 bytes left
[ 4.677261] hub 1-1.2:1.0: port 1: status 0101 change 0001
[ 4.677495] hub 1-1.2:1.0: port 2: status 0101 change 0001
[ 4.777056] usb 1-1.2: link qh128-0601/ffff88007a9f43c0 start 127 [1/2 us]
[ 4.777065] hub 1-1.2:1.0: state 7 ports 3 chg 0006 evt 0000
[ 4.777216] hub 1-1.2:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 4.805412] ieee1394: Host added: ID:BUS[0-00:1023] GUID[314fc00010e571e1]
[ 4.849239] usb 1-1.2.1: new full speed USB device using ehci_hcd and address 7
[ 4.941056] usb 1-1.2.1: ep0 maxpacket = 8
[ 4.943970] usb 1-1.2.1: skipped 1 descriptor after interface
[ 4.943974] usb 1-1.2.1: New USB device found, idVendor=413c, idProduct=8153
[ 4.944115] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.944329] usb 1-1.2.1: uevent
[ 4.944338] usb 1-1.2.1: usb_probe_device
[ 4.944340] usb 1-1.2.1: configuration #1 chosen from 1 choice
[ 4.944613] usb 1-1.2.1: adding 1-1.2.1:1.0 (config #1, interface 0)
[ 4.944634] usb 1-1.2.1:1.0: uevent
[ 4.944656] usbhid 1-1.2.1:1.0: usb_probe_interface
[ 4.944659] usbhid 1-1.2.1:1.0: usb_probe_interface - got id
[ 4.946224] input: HID 413c:8153 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input7
[ 4.965070] usb 1-1.2.1: link qh8-3008/ffff88007a9f4500 start 7 [1/2 us]
[ 4.981092] generic-usb 0003:413C:8153.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8153] on usb-0000:00:1a.7-1.2.1/input0
[ 4.981384] drivers/usb/core/inode.c: creating file '007'
[ 4.981620] hub 1-1.2:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 5.052250] usb 1-1.2.2: new full speed USB device using ehci_hcd and address 8
[ 5.145047] usb 1-1.2.2: ep0 maxpacket = 8
[ 5.148616] usb 1-1.2.2: skipped 1 descriptor after interface
[ 5.148620] usb 1-1.2.2: skipped 1 descriptor after endpoint
[ 5.148623] usb 1-1.2.2: New USB device found, idVendor=413c, idProduct=8154
[ 5.148739] usb 1-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.148952] usb 1-1.2.2: uevent
[ 5.148959] usb 1-1.2.2: usb_probe_device
[ 5.148961] usb 1-1.2.2: configuration #1 chosen from 1 choice
[ 5.149238] usb 1-1.2.2: adding 1-1.2.2:1.0 (config #1, interface 0)
[ 5.149262] usb 1-1.2.2:1.0: uevent
[ 5.149283] usbhid 1-1.2.2:1.0: usb_probe_interface
[ 5.149286] usbhid 1-1.2.2:1.0: usb_probe_interface - got id
[ 5.152009] input: HID 413c:8154 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input8
[ 5.184100] generic-usb 0003:413C:8154.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8154] on usb-0000:00:1a.7-1.2.2/input0
[ 5.184310] drivers/usb/core/inode.c: creating file '008'
[ 5.184336] hub 1-1.2:1.0: state 7 ports 3 chg 0000 evt 0004
[ 5.805050] hub 3-0:1.0: hub_suspend
[ 5.805056] usb usb3: bus auto-suspend
[ 5.805058] usb usb3: suspend_rh
[ 5.816054] hub 2-0:1.0: hub_suspend
[ 5.816059] usb usb2: bus auto-suspend
[ 5.816062] ehci_hcd 0000:00:1d.7: suspend root hub
[ 5.816085] hub 4-0:1.0: hub_suspend
[ 5.816088] usb usb4: bus auto-suspend
[ 5.816091] usb usb4: suspend_rh
[ 5.816107] hub 6-0:1.0: hub_suspend
[ 5.816110] usb usb6: bus auto-suspend
[ 5.816112] usb usb6: suspend_rh
[ 5.816128] hub 7-0:1.0: hub_suspend
[ 5.816132] usb usb7: bus auto-suspend
[ 5.816134] usb usb7: suspend_rh
[ 5.816150] hub 8-0:1.0: hub_suspend
[ 5.816153] usb usb8: bus auto-suspend
[ 5.816155] usb usb8: suspend_rh
[ 8.523772] udevd version 124 started
[ 8.581907] usb usb3: uevent
[ 8.581925] usb 3-0:1.0: uevent
[ 8.582017] usb usb4: uevent
[ 8.582034] usb 4-0:1.0: uevent
[ 8.582124] usb usb5: uevent
[ 8.582142] usb 5-0:1.0: uevent
[ 8.582176] usb 5-1: uevent
[ 8.582194] usb 5-1:0.0: uevent
[ 8.582260] usb 5-1:0.1: uevent
[ 8.582398] usb usb1: uevent
[ 8.582415] usb 1-0:1.0: uevent
[ 8.582449] usb 1-1: uevent
[ 8.582466] usb 1-1.1: uevent
[ 8.582485] usb 1-1.1:1.0: uevent
[ 8.582521] usb 1-1.2: uevent
[ 8.582539] usb 1-1.2.1: uevent
[ 8.582558] usb 1-1.2.1:1.0: uevent
[ 8.582695] usb 1-1.2.2: uevent
[ 8.582715] usb 1-1.2.2:1.0: uevent
[ 8.582865] usb 1-1.2:1.0: uevent
[ 8.582918] usb 1-1:1.0: uevent
[ 8.582968] usb 1-6: uevent
[ 8.582985] usb 1-6:1.0: uevent
[ 8.583021] usb 1-6:1.1: uevent
[ 8.583707] usb usb6: uevent
[ 8.583726] usb 6-0:1.0: uevent
[ 8.583817] usb usb7: uevent
[ 8.583835] usb 7-0:1.0: uevent
[ 8.583926] usb usb8: uevent
[ 8.583944] usb 8-0:1.0: uevent
[ 8.584038] usb usb2: uevent
[ 8.584056] usb 2-0:1.0: uevent
[ 8.647860] ACPI: AC Adapter [AC] (on-line)
[ 8.656923] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input9
[ 8.668955] ACPI: Lid Switch [LID]
[ 8.703693] ACPI: Battery Slot [BAT0] (battery present)
[ 8.703860] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input10
[ 8.728077] ACPI: Power Button (CM) [PBTN]
[ 8.728246] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.728410] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input11
[ 8.752075] ACPI: Sleep Button (CM) [SBTN]
[ 8.775649] usb usb2: usb auto-resume
[ 8.775653] ehci_hcd 0000:00:1d.7: resume root hub
[ 8.801033] hub 2-0:1.0: hub_resume
[ 8.801107] usb usb8: usb auto-resume
[ 8.801110] usb usb8: wakeup_rh
[ 8.801117] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 8.841016] hub 8-0:1.0: hub_resume
[ 8.841080] usb usb7: usb auto-resume
[ 8.841082] usb usb7: wakeup_rh
[ 8.841088] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.881013] hub 7-0:1.0: hub_resume
[ 8.881077] usb usb6: usb auto-resume
[ 8.881080] usb usb6: wakeup_rh
[ 8.881087] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.921015] hub 6-0:1.0: hub_resume
[ 8.921293] usb usb4: usb auto-resume
[ 8.921295] usb usb4: wakeup_rh
[ 8.921303] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.961014] hub 4-0:1.0: hub_resume
[ 8.961073] usb usb3: usb auto-resume
[ 8.961075] usb usb3: wakeup_rh
[ 8.961081] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 9.001047] hub 3-0:1.0: hub_resume
[ 9.001149] usbhid 1-1.2.2:1.0: disconnect by usbfs
[ 9.001242] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 9.029191] usb 1-1.2.2: usbfs: process 2074 (hid2hci) did not claim interface 0 before use
[ 9.064116] hub 1-1.2:1.0: state 7 ports 3 chg 0000 evt 0008
[ 9.064485] hub 1-1.2:1.0: port 3, status 0101, change 0001, 12 Mb/s
[ 9.193257] hub 1-1.2:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[ 9.265248] usb 1-1.2.3: new full speed USB device using ehci_hcd and address 9
[ 9.359746] usb 1-1.2.3: skipped 1 descriptor after interface
[ 9.359999] usb 1-1.2.3: default language 0x0409
[ 9.360873] usb 1-1.2.3: New USB device found, idVendor=413c, idProduct=8152
[ 9.361321] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.362084] usb 1-1.2.3: Product: Dell Wireless 410 Bluetooth + UWB Mini-card
[ 9.362531] usb 1-1.2.3: Manufacturer: Dell Computer Corp
[ 9.363027] usb 1-1.2.3: uevent
[ 9.363042] usb 1-1.2.3: usb_probe_device
[ 9.363044] usb 1-1.2.3: configuration #1 chosen from 1 choice
[ 9.363360] usb 1-1.2.3: adding 1-1.2.3:1.0 (config #1, interface 0)
[ 9.363374] usb 1-1.2.3:1.0: uevent
[ 9.363463] usb 1-1.2.3: adding 1-1.2.3:1.1 (config #1, interface 1)
[ 9.363475] usb 1-1.2.3:1.1: uevent
[ 9.363531] usb 1-1.2.3: adding 1-1.2.3:1.2 (config #1, interface 2)
[ 9.363544] usb 1-1.2.3:1.2: uevent
[ 9.363600] usb 1-1.2.3: adding 1-1.2.3:1.3 (config #1, interface 3)
[ 9.363612] usb 1-1.2.3:1.3: uevent
[ 9.363625] drivers/usb/core/inode.c: creating file '009'
[ 9.363657] hub 1-1.2:1.0: state 7 ports 3 chg 0000 evt 0008
[ 9.416864] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 9.416999] btusb 1-1.2.3:1.0: usb_probe_interface
[ 9.417001] btusb 1-1.2.3:1.0: usb_probe_interface - got id
[ 9.417040] btusb 1-1.2.3:1.2: usb_probe_interface
[ 9.417041] btusb 1-1.2.3:1.2: usb_probe_interface - got id
[ 9.417048] btusb 1-1.2.3:1.3: usb_probe_interface
[ 9.417050] btusb 1-1.2.3:1.3: usb_probe_interface - got id
[ 9.417060] usbcore: registered new interface driver btusb
[ 9.530937] Adding 5879748k swap on /dev/sda5. Priority:-1 extents:1 across:5879748k
[ 9.829686] EXT3 FS on sda1, internal journal
[ 10.073058] usb usb8: suspend_rh (auto-stop)
[ 10.073086] usb usb7: suspend_rh (auto-stop)
[ 10.073113] usb usb6: suspend_rh (auto-stop)
[ 10.073139] usb usb4: suspend_rh (auto-stop)
[ 10.073165] usb usb3: suspend_rh (auto-stop)
[ 10.805617] hub 2-0:1.0: hub_suspend
[ 10.805624] usb usb2: bus auto-suspend
[ 10.805625] ehci_hcd 0000:00:1d.7: suspend root hub
[ 11.657756] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 11.804061] hub 8-0:1.0: hub_suspend
[ 11.804071] usb usb8: bus auto-suspend
[ 11.804073] usb usb8: suspend_rh
[ 11.804091] hub 7-0:1.0: hub_suspend
[ 11.804094] usb usb7: bus auto-suspend
[ 11.804097] usb usb7: suspend_rh
[ 11.804113] hub 6-0:1.0: hub_suspend
[ 11.804117] usb usb6: bus auto-suspend
[ 11.804119] usb usb6: suspend_rh
[ 11.804135] hub 4-0:1.0: hub_suspend
[ 11.804139] usb usb4: bus auto-suspend
[ 11.804141] usb usb4: suspend_rh
[ 11.804156] hub 3-0:1.0: hub_suspend
[ 11.804160] usb usb3: bus auto-suspend
[ 11.804162] usb usb3: suspend_rh
[ 12.423826] ppdev: user-space parallel port driver
[ 14.091858] usb usb2: usb auto-resume
[ 14.091868] ehci_hcd 0000:00:1d.7: resume root hub
[ 14.117259] hub 2-0:1.0: hub_resume
[ 14.117525] usb usb8: usb auto-resume
[ 14.117533] usb usb8: wakeup_rh
[ 14.117553] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 14.151772] Bluetooth: L2CAP ver 2.11
[ 14.151779] Bluetooth: L2CAP socket layer initialized
[ 14.157063] hub 8-0:1.0: hub_resume
[ 14.157229] usb usb7: usb auto-resume
[ 14.157235] usb usb7: wakeup_rh
[ 14.157251] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.176221] Bluetooth: SCO (Voice Link) ver 0.6
[ 14.176227] Bluetooth: SCO socket layer initialized
[ 14.197266] hub 7-0:1.0: hub_resume
[ 14.197496] usb usb6: usb auto-resume
[ 14.197504] usb usb6: wakeup_rh
[ 14.197524] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.202484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.212744] btusb_submit_intr_urb: hci0 urb ffff88007788c6c0 submission failed (28)
[ 14.237256] hub 6-0:1.0: hub_resume
[ 14.238317] usb usb4: usb auto-resume
[ 14.238324] usb usb4: wakeup_rh
[ 14.238346] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.276269] hub 4-0:1.0: hub_resume
[ 14.276484] usb usb3: usb auto-resume
[ 14.276491] usb usb3: wakeup_rh
[ 14.276510] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.316076] hub 3-0:1.0: hub_resume
[ 14.316406] usbfs 1-1.2.2:1.0: disconnect by usbfs
[ 14.316430] usb 1-1.2.2: usbfs: process 3749 (hid2hci) did not claim interface 0 before use
[ 14.316468] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.343621] Bluetooth: RFCOMM socket layer initialized
[ 14.343628] Bluetooth: RFCOMM ver 1.10
[ 15.281037] usb usb8: suspend_rh (auto-stop)
[ 15.281075] usb usb7: suspend_rh (auto-stop)
[ 15.281107] usb usb6: suspend_rh (auto-stop)
[ 15.281137] usb usb4: suspend_rh (auto-stop)
[ 15.529027] usb usb3: suspend_rh (auto-stop)
[ 16.805016] hub 2-0:1.0: hub_suspend
[ 16.805023] usb usb2: bus auto-suspend
[ 16.805025] ehci_hcd 0000:00:1d.7: suspend root hub
[ 16.805047] hub 8-0:1.0: hub_suspend
[ 16.805049] usb usb8: bus auto-suspend
[ 16.805051] usb usb8: suspend_rh
[ 16.805065] hub 7-0:1.0: hub_suspend
[ 16.805067] usb usb7: bus auto-suspend
[ 16.805068] usb usb7: suspend_rh
[ 16.805082] hub 6-0:1.0: hub_suspend
[ 16.805084] usb usb6: bus auto-suspend
[ 16.805085] usb usb6: suspend_rh
[ 16.805099] hub 4-0:1.0: hub_suspend
[ 16.805101] usb usb4: bus auto-suspend
[ 16.805102] usb usb4: suspend_rh
[ 16.805117] hub 3-0:1.0: hub_suspend
[ 16.805119] usb usb3: bus auto-suspend
[ 16.805120] usb usb3: suspend_rh
[ 17.355706] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 18.145925] set status page addr 0x01fff000
[ 18.145948] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page
[ 18.492672] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 18.549165] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 18.550031] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.837798] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 21.838030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.797035] eth0: no IPv6 routers present
-andy
next prev parent reply other threads:[~2009-02-24 3:23 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-23 14:46 [Linux 2.6.29-rc6] [drm:i915_set_status_page] *ERROR* can not ioremap virtual address for G33 hw status page Maciej Rutecki
2009-02-23 15:22 ` Sitsofe Wheeler
2009-02-23 18:27 ` Maciej Rutecki
2009-02-23 20:02 ` Eric Anholt
2009-02-23 21:30 ` Rafael J. Wysocki
2009-02-23 21:40 ` Maciej Rutecki
2009-02-24 1:01 ` Yinghai Lu
2009-02-24 3:23 ` Andy Isaacson [this message]
2009-02-24 5:50 ` Yinghai Lu
2009-02-24 6:48 ` Andy Isaacson
2009-02-24 22:54 ` Andy Isaacson
2009-02-25 14:35 ` Zdenek Kabelac
2009-02-27 11:14 ` Maciej Rutecki
2009-02-24 19:44 ` Ingo Molnar
2009-02-24 19:48 ` Yinghai Lu
2009-02-24 21:39 ` Ingo Molnar
2009-02-24 21:44 ` Dave Airlie
2009-02-24 21:59 ` Linus Torvalds
2009-02-24 22:10 ` Pallipadi, Venkatesh
2009-02-24 6:54 ` Maciej Rutecki
2009-02-24 8:54 ` Maciej Rutecki
2009-02-24 9:01 ` Maciej Rutecki
2009-02-24 18:25 ` Yinghai Lu
2009-02-24 3:56 ` Andy Isaacson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090224032304.GA26344@hexapodia.org \
--to=adi@hexapodia.org \
--cc=airlied@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=eric@anholt.net \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.rutecki@gmail.com \
--cc=mingo@elte.hu \
--cc=mjg@redhat.com \
--cc=rjw@sisk.pl \
--cc=rui.zhang@intel.com \
--cc=torvalds@linux-foundation.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.