From: jes@sgi.com
To: kvm-ia64@vger.kernel.org
Subject: [patch 1/4] Map in SN2 RTC registers to the VMM module
Date: Wed, 25 Feb 2009 16:38:52 +0000 [thread overview]
Message-ID: <20090225164430.727262971@sgi.com> (raw)
On SN2, map in the SN2 RTC registers to the VMM module, needed for ITC
emulation.
Signed-off-by: Jes Sorensen <jes@sgi.com>
---
arch/ia64/include/asm/kvm_host.h | 2 +
arch/ia64/include/asm/pgtable.h | 2 +
arch/ia64/kvm/kvm-ia64.c | 43 ++++++++++++++++++++++++++++++++++-----
3 files changed, 42 insertions(+), 5 deletions(-)
Index: linux-2.6.git/arch/ia64/include/asm/kvm_host.h
=================================--- linux-2.6.git.orig/arch/ia64/include/asm/kvm_host.h
+++ linux-2.6.git/arch/ia64/include/asm/kvm_host.h
@@ -390,6 +390,7 @@
int last_run_cpu;
int vmm_tr_slot;
int vm_tr_slot;
+ int sn_rtc_tr_slot;
#define KVM_MP_STATE_RUNNABLE 0
#define KVM_MP_STATE_UNINITIALIZED 1
@@ -484,6 +485,7 @@
unsigned long vmm_init_rr;
int online_vcpus;
+ int is_sn2;
struct kvm_ioapic *vioapic;
struct kvm_vm_stat stat;
Index: linux-2.6.git/arch/ia64/include/asm/pgtable.h
=================================--- linux-2.6.git.orig/arch/ia64/include/asm/pgtable.h
+++ linux-2.6.git/arch/ia64/include/asm/pgtable.h
@@ -146,6 +146,8 @@
#define PAGE_GATE __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
#define PAGE_KERNEL __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX)
#define PAGE_KERNELRX __pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+#define PAGE_KERNEL_UC __pgprot(__DIRTY_BITS | _PAGE_PL_0 | _PAGE_AR_RWX | \
+ _PAGE_MA_UC)
# ifndef __ASSEMBLY__
Index: linux-2.6.git/arch/ia64/kvm/kvm-ia64.c
=================================--- linux-2.6.git.orig/arch/ia64/kvm/kvm-ia64.c
+++ linux-2.6.git/arch/ia64/kvm/kvm-ia64.c
@@ -41,6 +41,9 @@
#include <asm/div64.h>
#include <asm/tlb.h>
#include <asm/elf.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/shub_mmr.h>
#include "misc.h"
#include "vti.h"
@@ -120,8 +123,7 @@
unsigned long saved_psr;
int slot;
- pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base),
- PAGE_KERNEL));
+ pte = pte_val(mk_pte_phys(__pa(kvm_vmm_base), PAGE_KERNEL));
local_irq_save(saved_psr);
slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
local_irq_restore(saved_psr);
@@ -416,6 +418,23 @@
return 1;
}
+static int kvm_sn2_setup_mappings(struct kvm_vcpu *vcpu)
+{
+ unsigned long pte, rtc_phys_addr, map_addr;
+ int slot;
+
+ map_addr = KVM_VMM_BASE + (1UL << KVM_VMM_SHIFT);
+ rtc_phys_addr = LOCAL_MMR_OFFSET | SH_RTC;
+ pte = pte_val(mk_pte_phys(rtc_phys_addr, PAGE_KERNEL_UC));
+ slot = ia64_itr_entry(0x3, map_addr, pte, PAGE_SHIFT);
+ vcpu->arch.sn_rtc_tr_slot = slot;
+ if (slot < 0) {
+ printk(KERN_ERR "Mayday mayday! RTC mapping failed!\n");
+ slot = 0;
+ }
+ return slot;
+}
+
int kvm_emulate_halt(struct kvm_vcpu *vcpu)
{
@@ -588,18 +607,29 @@
if (r < 0)
goto out;
vcpu->arch.vm_tr_slot = r;
+
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+ if (kvm->arch.is_sn2) {
+ r = kvm_sn2_setup_mappings(vcpu);
+ if (r < 0)
+ goto out;
+ }
+#endif
+
r = 0;
out:
return r;
-
}
static void kvm_purge_vmm_mapping(struct kvm_vcpu *vcpu)
{
-
+ struct kvm *kvm = vcpu->kvm;
ia64_ptr_entry(0x3, vcpu->arch.vmm_tr_slot);
ia64_ptr_entry(0x3, vcpu->arch.vm_tr_slot);
-
+#if defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+ if (kvm->arch.is_sn2)
+ ia64_ptr_entry(0x3, vcpu->arch.sn_rtc_tr_slot);
+#endif
}
static int kvm_vcpu_pre_transition(struct kvm_vcpu *vcpu)
@@ -823,6 +853,9 @@
if (IS_ERR(kvm))
return ERR_PTR(-ENOMEM);
+
+ kvm->arch.is_sn2 = ia64_platform_is("sn2");
+
kvm_init_vm(kvm);
kvm->arch.online_vcpus = 0;
reply other threads:[~2009-02-25 16:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090225164430.727262971@sgi.com \
--to=jes@sgi.com \
--cc=kvm-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.