From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: linux-kernel@vger.kernel.org
Subject: Re: linux-next-20090225: ide-cd triggers BUG at arch/x86/mm/ioremap.c:80!
Date: Thu, 26 Feb 2009 15:29:43 +0100 [thread overview]
Message-ID: <200902261529.43554.bzolnier@gmail.com> (raw)
In-Reply-To: <200902260229.n1Q2T2lY006773@www262.sakura.ne.jp>
On Thursday 26 February 2009, Tetsuo Handa wrote:
> 2.6.29-rc6 is OK.
Could you try to narrow down the issue by bisecting linux-next?
> Removing IDE CDROM drive solves this problem.
>
> Full log is at http://I-love.SAKURA.ne.jp/tmp/dmesg-2.6.29-rc6-next-20090225.txt
>
> [ 0.000000] Linux version 2.6.29-rc6-next-20090225 (root@tomoyo) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Thu Feb 26 09:48:39 JST 2009
> (...snipped...)
> [ 2.448739] Uniform Multi-Platform E-IDE driver
> [ 2.452036] piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01)
> [ 2.455202] piix 0000:00:07.1: IDE port disabled
> [ 2.458046] piix 0000:00:07.1: not 100% native mode: will probe irqs later
> [ 2.460836] ide0: BM-DMA at 0x10e8-0x10ef
> [ 3.200762] hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
> [ 3.542671] hda: UDMA/33 mode selected
> [ 3.544877] ide0 at 0x170-0x177,0x376 on irq 15
> [ 3.550967] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> [ 3.554908] ide-gd driver 1.18
> [ 3.557199] ide-cd driver 5.00
> [ 3.564266] ide-cd: hda: ATAPI 1X CD-ROM drive, 32kB Cache
> [ 3.567031] Uniform CD-ROM driver Revision: 3.20
> [ 3.569938] ------------[ cut here ]------------
> [ 3.571751] kernel BUG at arch/x86/mm/ioremap.c:80!
> [ 3.572605] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
> [ 3.572605] last sysfs file:
> [ 3.572605] Modules linked in:
> [ 3.572605]
> [ 3.572605] Pid: 1, comm: swapper Not tainted (2.6.29-rc6-next-20090225 #1) VMware Virtual Platform
> [ 3.572605] EIP: 0060:[<c011e402>] EFLAGS: 00010213 CPU: 0
> [ 3.572605] EIP is at __phys_addr+0x52/0x70
> [ 3.572605] EAX: 00000000 EBX: 00000000 ECX: 00000018 EDX: 00000000
> [ 3.572605] ESI: f69f4060 EDI: 00000000 EBP: f700f930 ESP: f700f930
> [ 3.572605] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [ 3.572605] Process swapper (pid: 1, ti=f700f000 task=f7030000 task.ti=f700f000)
> [ 3.572605] Stack:
> [ 3.572605] f700f944 c027dd73 f69f4060 f700f960 f700f9a0 f700f954 c02e7c82 f6570840
> [ 3.572605] f700f960 f700f9ac c02f5a71 f6b7e5b0 00000000 00000000 00000000 00000000
> [ 3.572605] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 3.572605] Call Trace:
> [ 3.572605] [<c027dd73>] ? sg_init_one+0x23/0x90
> [ 3.572605] [<c02e7c82>] ? ide_map_sg+0x42/0x70
> [ 3.572605] [<c02f5a71>] ? ide_cd_do_request+0x101/0x150
> [ 3.572605] [<c02e7e48>] ? start_request+0xa8/0x160
> [ 3.572605] [<c015d85b>] ? trace_hardirqs_on+0xb/0x10
> [ 3.572605] [<c02e809b>] ? do_ide_request+0x16b/0x250
> [ 3.572605] [<c02646f5>] ? blk_remove_plug+0x75/0xf0
> [ 3.572605] [<c02658c0>] ? blk_start_queueing+0x20/0x30
> [ 3.572605] [<c026340e>] ? elv_insert+0x17e/0x1b0
> [ 3.572605] [<c02645a8>] ? blk_plug_device+0x88/0x120
> [ 3.572605] [<c02634c2>] ? __elv_add_request+0x82/0xc0
> [ 3.572605] [<c0269c20>] ? blk_execute_rq_nowait+0x60/0xb0
> [ 3.572605] [<c0269d06>] ? blk_execute_rq+0x96/0xd0
> [ 3.572605] [<c0269b90>] ? blk_end_sync_rq+0x0/0x30
> [ 3.572605] [<c02656ec>] ? get_request_wait+0x2c/0x160
> [ 3.572605] [<c0160359>] ? __lock_acquired+0x109/0x1c0
> [ 3.572605] [<c0265844>] ? blk_get_request+0x24/0x80
> [ 3.572605] [<c02f5276>] ? ide_cd_queue_pc+0xb6/0x140
> [ 3.572605] [<c01a9764>] ? trace+0x14/0x90
> [ 3.572605] [<c01a935a>] ? check_object+0xaa/0x1c0
> [ 3.572605] [<c01a8f84>] ? init_object+0x14/0x90
> [ 3.572605] [<c01a99a4>] ? alloc_debug_processing+0xf4/0x120
> [ 3.572605] [<c02f5b84>] ? cdrom_check_status+0x84/0x90
> [ 3.572605] [<c015d85b>] ? trace_hardirqs_on+0xb/0x10
> [ 3.572605] [<c02f5d31>] ? ide_cd_read_toc+0x41/0x420
> [ 3.572605] [<c02f1fc1>] ? ide_add_proc_entries+0x31/0x60
> [ 3.572605] [<c02f6921>] ? ide_cdrom_setup+0x101/0x130
> [ 3.572605] [<c027aa0c>] ? sprintf+0x1c/0x20
> [ 3.572605] [<c02f6d7e>] ? ide_cd_probe+0xee/0x140
> [ 3.572605] [<c01fb106>] ? sysfs_addrm_finish+0x16/0xa0
> [ 3.572605] [<c01fbb40>] ? sysfs_do_create_link+0xc0/0x150
> [ 3.572605] [<c015a424>] ? lock_release_holdtime+0x74/0xc0
> [ 3.572605] [<c01fbbe7>] ? sysfs_create_link+0x17/0x20
> [ 3.572605] [<c02e6cc4>] ? generic_ide_probe+0x24/0x30
> [ 3.572605] [<c02c483c>] ? really_probe+0x8c/0x110
> [ 3.572605] [<c02c493c>] ? driver_probe_device+0x1c/0x30
> [ 3.572605] [<c01515df>] ? down+0x2f/0x50
> [ 3.572605] [<c02c4a84>] ? __driver_attach+0x74/0x80
> [ 3.572605] [<c02c37b5>] ? bus_for_each_dev+0x55/0x70
> [ 3.572605] [<c02c4aae>] ? driver_attach+0x1e/0x30
> [ 3.572605] [<c02c4a10>] ? __driver_attach+0x0/0x80
> [ 3.572605] [<c02c3f36>] ? bus_add_driver+0xb6/0x1a0
> [ 3.572605] [<c02e6d00>] ? generic_ide_shutdown+0x0/0x30
> [ 3.572605] [<c02e6d00>] ? generic_ide_shutdown+0x0/0x30
> [ 3.572605] [<c02c4f50>] ? driver_register+0x70/0xd0
> [ 3.572605] [<c0137efd>] ? printk+0x1d/0x30
> [ 3.572605] [<c058fef0>] ? ide_cdrom_init+0x0/0x20
> [ 3.572605] [<c058ff0c>] ? ide_cdrom_init+0x1c/0x20
> [ 3.572605] [<c0101042>] ? do_one_initcall+0x32/0x1d0
> [ 3.572605] [<c011f54f>] ? __change_page_attr_set_clr+0x2f/0x70
> [ 3.572605] [<c015ca8c>] ? validate_chain+0x3fc/0x540
> [ 3.572605] [<c015ca8c>] ? validate_chain+0x3fc/0x540
> [ 3.572605] [<c015e95c>] ? __lock_acquire+0x29c/0x8b0
> [ 3.572605] [<c01a9008>] ? check_bytes+0x8/0x20
> [ 3.572605] [<c01a9099>] ? check_bytes_and_report+0x29/0xc0
> [ 3.572605] [<c0198574>] ? page_address+0x14/0xe0
> [ 3.572605] [<c01a9196>] ? check_pad_bytes+0x66/0x80
> [ 3.572605] [<c0198574>] ? page_address+0x14/0xe0
> [ 3.572605] [<c01a9764>] ? trace+0x14/0x90
> [ 3.572605] [<c01a935a>] ? check_object+0xaa/0x1c0
> [ 3.572605] [<c015ca8c>] ? validate_chain+0x3fc/0x540
> [ 3.572605] [<c015e95c>] ? __lock_acquire+0x29c/0x8b0
> [ 3.572605] [<c015a424>] ? lock_release_holdtime+0x74/0xc0
> [ 3.572605] [<c01f355c>] ? proc_register+0x9c/0x140
> [ 3.572605] [<c015fb47>] ? __lock_release+0x47/0x70
> [ 3.572605] [<c03eace2>] ? _spin_unlock+0x22/0x30
> [ 3.572605] [<c01f355c>] ? proc_register+0x9c/0x140
> [ 3.572605] [<c01f38e9>] ? create_proc_entry+0x69/0xa0
> [ 3.572605] [<c0173234>] ? register_irq_proc+0x14/0xd0
> [ 3.572605] [<c056ea6a>] ? do_initcalls+0x2a/0x40
> [ 3.572605] [<c056ead0>] ? kernel_init+0x0/0xa0
> [ 3.572605] [<c056ea9c>] ? do_basic_setup+0x1c/0x20
> [ 3.572605] [<c056eb25>] ? kernel_init+0x55/0xa0
> [ 3.572605] [<c0103d33>] ? kernel_thread_helper+0x7/0x10
> [ 3.572605] Code: 05 00 00 80 00 39 c2 72 ea a1 c4 d4 52 c0 2d 00 30 60 00 25 00 00 c0 ff 2d 00 20 00 00 39 c2 73 d2 0f 0b 8d b6 00 00 00 00 eb fe <0f> 0b 8d b6 00 00 00 00 8d bf 00 00 00 00 eb fe 8d b4 26 00 00
> [ 3.572605] EIP: [<c011e402>] __phys_addr+0x52/0x70 SS:ESP 0068:f700f930
> [ 3.824801] ---[ end trace d537ae8ff1cd7947 ]---
next prev parent reply other threads:[~2009-02-26 14:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-26 2:29 linux-next-20090225: ide-cd triggers BUG at arch/x86/mm/ioremap.c:80! Tetsuo Handa
2009-02-26 14:29 ` Bartlomiej Zolnierkiewicz [this message]
2009-02-26 15:51 ` Borislav Petkov
2009-03-02 2:15 ` Tetsuo Handa
2009-03-02 13:15 ` Borislav Petkov
2009-03-02 15:27 ` Bartlomiej Zolnierkiewicz
2009-03-03 8:35 ` Borislav Petkov
2009-03-04 3:33 ` Tetsuo Handa
2009-03-04 7:23 ` Borislav Petkov
2009-03-03 12:31 ` Tetsuo Handa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200902261529.43554.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=penguin-kernel@i-love.sakura.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.