From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org
Subject: pull request: wireless-next-2.6 2009-02-27
Date: Fri, 27 Feb 2009 15:41:10 -0500 [thread overview]
Message-ID: <20090227204110.GJ3687@tuxdriver.com> (raw)
Dave,
Here is an even bigger batch of changes intended for 2.6.30. They run
the usual gamut of wireless driver and mac80211 changes...
I have reverted the genetlink patch from Johannes and another of
his that relied upon it. There is also still that ugly one from me.
It is a kluge but it prevents a crash on my Lenovo T400. I bisected
the crash down to "mac80211: use cfg80211s BSS infrastructure",
which is already in net-next-2.6. Still, if it is too ugly then let
me know and I'll reformulate without it.
Please let me know if there are problems!
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6/
---
The following changes since commit f11c179eea77b8afc2fb7cb4b9a8815b85e3c16f:
David S. Miller (1):
Merge branch 'master' of master.kernel.org:/.../davem/net-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git master
Abhijeet Kolekar (7):
iwl3945: use iwl_rx_scan handlers
iwl3945: use iwl_mac_hw_scan callback
iwl3945: use iwl rx handlers
iwl3945: use iwl_rx_reply_error notification
iwl3945: remove duplicate interrupt code
iwl3945: use iwl_isr
iwl3945: use SW rfkill from iwlwifi
Alina Friedrichsen (4):
ath9k: Don't reset TSF after scanning automatically
mac80211: Introduce a generic commit() to apply changes
mac80211: Don't merge with the same BSSID
mac80211: Give it some time to do the TSF sync
Bing Zhao (1):
libertas: fix power save issue in libertas_sdio module
Bob Copeland (11):
ath9k: remove write-only current_rd_inuse
ath9k: save a few calls to ath9k_regd_get_eepromRD
ath9k: convert isWwrSKU macro into C code
ath9k: remove ath9k_regd_get_rd()
ath9k: remove prototype for ath9k_regd_get_current_country
ath9k: move common regulatory code out of if() branches
ath5k: don't mask off interrupt bits
ath5k: use spin_lock_irqsave for beacon lock
ath5k: move beacon processing to a tasklet
ath5k: compute rts/cts duration after computing full pktlen
ath9k: fix 802.11g conformance test limit typo
Dan Williams (5):
hostap: convert usage of net/ieee80211.h to linux/ieee80211.h
make net/ieee80211.h private to ipw2x00
cfg80211: age scan results on resume
ipw2x00: age scan results on resume
libertas: use private SDIO workqueue to avoid scheduling latency
David Kilroy (2):
orinoco: validate firmware header
orinoco: prevent accessing memory outside the firmware image
Fenghua Yu (1):
iwlwifi: dma mapping read and write changes
Helmut Schaa (1):
iwlagn: clean up error path in iwl_pci_probe
Ivo van Doorn (4):
rt2x00: uncomment get_tsf
rt2x00: Remove check for rf word 0
rt2x00: Add various new USB IDs for rt73usb
rt2x00: Fix RF offset
Jason Andryuk (7):
at76c50x-usb: update to latest mac80211 hw scan api
at76c50x-usb: convert at76_debug to an unsigned int
at76c50x-usb: fix oops on disconnect
at76c50x-usb: clean up DMA on stack
at76c50x-usb: additional disconnect fixes
iwl3945: initialize is_valid_rtc_data_addr function pointer
iwl3945: re-add iwl_poll_direct_bit return value check
Jiri Slaby (1):
ipw2200, fix ipw io functions
Johannes Berg (8):
mac80211: disallow moving netns
mac80211: fix aggregation for hardware with ampdu queues
mac80211: split IBSS/managed code
cfg80211/mac80211: fill qual.qual value/adjust max_qual.qual
mac80211: add missing kernel-doc
nl80211: remove admin requirement from station get
cfg80211: clean up signal type
mac80211/cfg80211: move iwrange handler to cfg80211
John Daiker (1):
b43: checkpatch.pl cleanups
John W. Linville (2):
airo: correct improper initialization of local variable
iwlagn: default to MAX_UCODE_BEACON_INTERVAL in iwl_adjust_beacon_interval
Jouni Malinen (4):
nl80211: Optional IEs into scan request
nl80211: Provide access to STA TX/RX packet counters
ath9k: Unlock sc->mutex on error path
nl80211: Avoid AP mode BUG_ON hang with invalid lock assert
Kalle Valo (3):
at76c50x-usb: add driver
at76c50x-usb: add link to the TODO list
at76c50x-usb: use dev_name() instead of struct device.bus_id
Luis R. Rodriguez (23):
cfg80211: rename cfg80211_registered_device's idx to wiphy_idx
cfg80211: add wiphy_idx_valid to check for wiphy_idx sanity
cfg80211: rename cfg80211_drv_mutex to cfg80211_mutex
nl80211: disallow user requests prior to regulatory_init()
cfg80211: add regulatory_hint_core() to separate the core reg hint
cfg80211: propagate -ENOMEM during regulatory_init()
cfg80211: add assert_cfg80211_lock() to ensure proper protection
cfg80211: make regulatory_request use wiphy_idx instead of wiphy
cfg80211: protect first access of last_request on 11d hint under mutex
cfg80211: remove likely from an 11d hint case
cfg80211: free rd on unlikely event on 11d hint
cfg80211: move all regulatory hints to workqueue
cfg80211: comments style cleanup
cfg80211: allow drivers that agree on regulatory to agree
cfg80211: rename regdom_changed to regdom_changes() and use it
cfg80211: enable active-scan / beaconing on Ch 1-11 for world regdom
cfg80211: enable 5 GHz world roaming channels
cfg80211: Add AP beacon regulatory hints
ath9k: follow beacon hints on reg_notifier when world roaming
cfg80211: make __regulatory_hint() static
cfg80211: pass the regulatory_request struct in __regulatory_hint()
cfg80211: do not kzalloc() again for a new request on __regulatory_hint
cfg80211: pass the regulatory_request to ignore_request
Michael Buesch (16):
b43: Move DMA stop sanity check
b43: Fix DMA buffer size handling
b43: Optimize DMA buffers
b43: Add slot count compiletime assertion
b43: Fix radio host flags
b43: Honor the no-slow-clock boardflag
b43: Enable PCI slow clock workaround, if needed.
mac80211: Add software scan notifiers
b43: Implement sw scan callbacks
b43: Convert usage of b43_phy_set()
b43: Convert usage of b43_phy_mask()
b43: Convert usage of b43_phy_maskset()
b43: Convert usage of b43_radio_set()
b43: Convert usage of b43_radio_mask()
b43: Convert usage of b43_radio_maskset()
b43: Remove bogus integer truncation warnings
Randy Dunlap (1):
wireless: fix for CONFIG_NL80211=n
Reinette Chatre (2):
iwlwifi: use singlethread workqueue
iwlwifi: Fix and rework Kconfig file
Roel Kluin (3):
wavelan: Test arraysize before an element of the array.
p54: misplaced parentheses
b43: Fix LO calibration txctl reg value
Senthil Balasubramanian (1):
ath9k: Add open loop control support
Sujith (21):
ath9k: Store the correct max TX power level
ath9k: Fix rd_ext EEPROM capability for AR9285
ath9k: Enable Fractional N mode
ath9k: Enable TSF Out of Range Interrupt
ath9k: Initialize AGC calibration properly
ath9k: Fix bug in disabling MIB counters
ath9k: Fix incorrect noise floor reading for 4k EEPROM
ath9k: Decrease minimum NF threshold
mac80211: Extend the rate control API with an update callback
ath9k: Program the RTC registers correctly
ath9k: Fix HW wait timeout
ath9k: Fix antenna assignment bug in TX status processing
ath9k: Initialize channel change time
ath9k: Remove a few unused capability macros
ath9k: Remove ath_txq_depth and get the queue depth directly
ath9k: Use beacon interval directly
ath9k: Remove multiple macro occurrences
ath9k: Add PER to RC debug statistics
ath9k: Fix bug in EEPROM chainmask retrieval
ath9k: Fix PCI shutdown sequence
ath9k: Add appropriate ANI values for AP mode
Vasanthakumar Thiagarajan (3):
mac80211: Make sure non-HT connection when IEEE80211_STA_TKIP_WEP_USED is set
ath9k: Fix PTK/GTK handshake timeout
ath9k: Filter out beacons from other BSS in STA mode
Wu, Fengguang (1):
iwlwifi: report correct and detailed values about requested txpower
drivers/net/wireless/Kconfig | 8 +
drivers/net/wireless/Makefile | 2 +
drivers/net/wireless/airo.c | 3 +-
drivers/net/wireless/at76c50x-usb.c | 2501 ++++++++++++++++++++
drivers/net/wireless/at76c50x-usb.h | 463 ++++
drivers/net/wireless/ath5k/base.c | 84 +-
drivers/net/wireless/ath5k/base.h | 1 +
drivers/net/wireless/ath9k/ani.c | 7 +-
drivers/net/wireless/ath9k/ath9k.h | 12 +-
drivers/net/wireless/ath9k/beacon.c | 8 +-
drivers/net/wireless/ath9k/calib.c | 64 +-
drivers/net/wireless/ath9k/calib.h | 2 +-
drivers/net/wireless/ath9k/debug.c | 12 +-
drivers/net/wireless/ath9k/debug.h | 9 +-
drivers/net/wireless/ath9k/eeprom.c | 232 ++-
drivers/net/wireless/ath9k/eeprom.h | 37 +-
drivers/net/wireless/ath9k/hw.c | 117 +-
drivers/net/wireless/ath9k/hw.h | 20 +-
drivers/net/wireless/ath9k/mac.c | 30 +-
drivers/net/wireless/ath9k/mac.h | 3 +-
drivers/net/wireless/ath9k/main.c | 72 +-
drivers/net/wireless/ath9k/pci.c | 7 +-
drivers/net/wireless/ath9k/phy.c | 19 +-
drivers/net/wireless/ath9k/phy.h | 29 +
drivers/net/wireless/ath9k/rc.c | 10 +-
drivers/net/wireless/ath9k/recv.c | 12 +-
drivers/net/wireless/ath9k/reg.h | 12 +-
drivers/net/wireless/ath9k/regd.c | 123 +-
drivers/net/wireless/ath9k/regd.h | 9 -
drivers/net/wireless/ath9k/xmit.c | 28 +-
drivers/net/wireless/b43/debugfs.c | 4 +-
drivers/net/wireless/b43/dma.c | 64 +-
drivers/net/wireless/b43/dma.h | 17 +-
drivers/net/wireless/b43/lo.c | 77 +-
drivers/net/wireless/b43/main.c | 74 +-
drivers/net/wireless/b43/phy_a.c | 111 +-
drivers/net/wireless/b43/phy_g.c | 611 ++----
drivers/net/wireless/b43/pio.c | 16 +-
drivers/net/wireless/b43/rfkill.c | 2 +-
drivers/net/wireless/b43/wa.c | 113 +-
drivers/net/wireless/hostap/hostap.h | 2 +-
drivers/net/wireless/hostap/hostap_80211.h | 2 +-
drivers/net/wireless/hostap/hostap_80211_rx.c | 88 +-
drivers/net/wireless/hostap/hostap_80211_tx.c | 51 +-
drivers/net/wireless/hostap/hostap_ap.c | 138 +-
drivers/net/wireless/hostap/hostap_ap.h | 6 +-
drivers/net/wireless/hostap/hostap_hw.c | 24 +-
drivers/net/wireless/hostap/hostap_info.c | 1 +
drivers/net/wireless/hostap/hostap_ioctl.c | 1 +
drivers/net/wireless/hostap/hostap_main.c | 38 +-
drivers/net/wireless/ipw2x00/Kconfig | 2 +-
.../net/wireless/ipw2x00}/ieee80211.h | 3 +
drivers/net/wireless/ipw2x00/ipw2100.c | 12 +-
drivers/net/wireless/ipw2x00/ipw2100.h | 8 +-
drivers/net/wireless/ipw2x00/ipw2200.c | 116 +-
drivers/net/wireless/ipw2x00/ipw2200.h | 7 +-
drivers/net/wireless/ipw2x00/libipw_geo.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_module.c | 17 +-
drivers/net/wireless/ipw2x00/libipw_rx.c | 5 +-
drivers/net/wireless/ipw2x00/libipw_tx.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_wx.c | 27 +-
drivers/net/wireless/iwlwifi/Kconfig | 56 +-
drivers/net/wireless/iwlwifi/Makefile | 4 +-
drivers/net/wireless/iwlwifi/iwl-3945.c | 3 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 173 +--
drivers/net/wireless/iwlwifi/iwl-core.c | 108 +-
drivers/net/wireless/iwlwifi/iwl-core.h | 14 +-
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-scan.c | 68 +
drivers/net/wireless/iwlwifi/iwl-tx.c | 6 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 437 +----
drivers/net/wireless/libertas/defs.h | 1 +
drivers/net/wireless/libertas/if_sdio.c | 20 +-
drivers/net/wireless/orinoco/fw.c | 49 +-
drivers/net/wireless/orinoco/hermes_dld.c | 99 +-
drivers/net/wireless/orinoco/hermes_dld.h | 12 +-
drivers/net/wireless/p54/p54common.c | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 3 -
drivers/net/wireless/rt2x00/rt2400pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 3 -
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 3 -
drivers/net/wireless/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 10 +-
drivers/net/wireless/rt2x00/rt61pci.c | 3 -
drivers/net/wireless/rt2x00/rt61pci.h | 4 +-
drivers/net/wireless/rt2x00/rt73usb.c | 19 +-
drivers/net/wireless/rt2x00/rt73usb.h | 4 +-
drivers/net/wireless/wavelan.c | 3 +-
drivers/net/wireless/zd1211rw/zd_mac.c | 6 +-
include/linux/nl80211.h | 5 +
include/net/cfg80211.h | 31 +-
include/net/mac80211.h | 26 +-
include/net/wireless.h | 17 +-
net/mac80211/Makefile | 1 +
net/mac80211/agg-rx.c | 6 +-
net/mac80211/agg-tx.c | 191 +-
net/mac80211/cfg.c | 49 +-
net/mac80211/debugfs_netdev.c | 48 +-
net/mac80211/ht.c | 19 +-
net/mac80211/ibss.c | 905 +++++++
net/mac80211/ieee80211_i.h | 140 +-
net/mac80211/iface.c | 77 +-
net/mac80211/key.c | 2 +-
net/mac80211/main.c | 24 +-
net/mac80211/mlme.c | 1665 ++++----------
net/mac80211/rate.h | 12 +
net/mac80211/rx.c | 37 +-
net/mac80211/scan.c | 62 +-
net/mac80211/spectmgmt.c | 26 +-
net/mac80211/sta_info.c | 15 +-
net/mac80211/sta_info.h | 5 +-
net/mac80211/tx.c | 29 +-
net/mac80211/util.c | 254 ++-
net/mac80211/wext.c | 262 +--
net/mac80211/wme.c | 161 +--
net/mac80211/wme.h | 6 -
net/wireless/core.c | 103 +-
net/wireless/core.h | 36 +-
net/wireless/nl80211.c | 75 +-
net/wireless/nl80211.h | 4 +
net/wireless/reg.c | 945 ++++++--
net/wireless/reg.h | 36 +-
net/wireless/scan.c | 64 +-
net/wireless/sysfs.c | 9 +-
net/wireless/wext-compat.c | 97 +
126 files changed, 8007 insertions(+), 4142 deletions(-)
create mode 100644 drivers/net/wireless/at76c50x-usb.c
create mode 100644 drivers/net/wireless/at76c50x-usb.h
rename {include/net => drivers/net/wireless/ipw2x00}/ieee80211.h (99%)
create mode 100644 net/mac80211/ibss.c
Omnibus patch is available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6-2009-02-27.patch.bz2
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2009-02-27 20:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-27 20:41 John W. Linville [this message]
2009-02-28 23:50 ` pull request: wireless-next-2.6 2009-02-27 David Miller
2009-03-01 6:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090227204110.GJ3687@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.