From: Marcin Slusarz <marcin.slusarz@gmail.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: LKML <linux-kernel@vger.kernel.org>, linux-input@vger.kernel.org
Subject: Re: [RFC PATCH 2/2] Add virtual "idle" device
Date: Tue, 3 Mar 2009 15:17:01 +0100 [thread overview]
Message-ID: <20090303141652.GA31091@joi> (raw)
In-Reply-To: <10f740e80903030200y3f055c28u6a01f279a53cacc1@mail.gmail.com>
On Tue, Mar 03, 2009 at 11:00:04AM +0100, Geert Uytterhoeven wrote:
> On Mon, Mar 2, 2009 at 23:42, Marcin Slusarz <marcin.slusarz@gmail.com> wrote:
> > --- /dev/null
> > +++ b/drivers/char/idle.c
> > @@ -0,0 +1,445 @@
>
> > +#ifdef DEBUG
> > +#define idle_printk(args...) printk(KERN_DEBUG "IDLEDEV: " args)
> > +#else
> > +#define idle_printk(args...) do {} while (0)
> > +#endif
>
> Please use the standard debug interface, i.e.
>
> #define pr_fmt(fmt) "IDLEDEV: " fmt
>
> and use pr_debug() everywhere, to always have printf()-style format checking.
Thanks for looking at the patch!
And here's a patch implementing your request:
---
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Subject: [PATCH] idle: convert idle_printk to pr_debug
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
---
drivers/char/idle.c | 40 +++++++++++++++++++---------------------
1 files changed, 19 insertions(+), 21 deletions(-)
diff --git a/drivers/char/idle.c b/drivers/char/idle.c
index 5fe792d..d2b6b2b 100644
--- a/drivers/char/idle.c
+++ b/drivers/char/idle.c
@@ -13,11 +13,17 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+
+/* these 2 defines must be before include linux/kernel.h */
+/*#define DEBUG*/
+#define pr_fmt(fmt) "IDLEDEV: " fmt
+
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/hrtimer.h>
+#include <linux/kernel.h>
#include <linux/keyboard.h>
#include <linux/ktime.h>
#include <linux/module.h>
@@ -32,14 +38,6 @@
/* TODO: support all input devices */
-/*#define DEBUG*/
-
-#ifdef DEBUG
-#define idle_printk(args...) printk(KERN_DEBUG "IDLEDEV: " args)
-#else
-#define idle_printk(args...) do {} while (0)
-#endif
-
/* spinlock protecting all data */
static DEFINE_SPINLOCK(idle_events_lock);
@@ -66,7 +64,7 @@ static int idle_kb_event(struct notifier_block *this,
{
unsigned long flags;
- idle_printk("kb_event\n");
+ pr_debug("kb_event\n");
spin_lock_irqsave(&idle_events_lock, flags);
@@ -124,7 +122,7 @@ static enum hrtimer_restart idle_timer_timeout(struct hrtimer *timer)
container_of(timer, struct idle_file_data, timer);
unsigned long flags;
- idle_printk("timeout\n");
+ pr_debug("timeout\n");
spin_lock_irqsave(&idle_events_lock, flags);
@@ -147,7 +145,7 @@ static int idle_get_event(struct idle_file_data *d, u8 __user *user_event)
bool wakeup;
u8 event;
- idle_printk("idle_get_event\n");
+ pr_debug("idle_get_event\n");
spin_lock_irq(&idle_events_lock);
@@ -187,7 +185,7 @@ static int idle_set_timeout(struct idle_file_data *d, u32 secs)
if (ktime_compare(timeout, d->timeout) == 0)
return -EALREADY;
- idle_printk("setting timeout to %u\n", secs);
+ pr_debug("setting timeout to %u\n", secs);
hrtimer_cancel(&d->timer);
@@ -204,7 +202,7 @@ static int idle_set_timeout(struct idle_file_data *d, u32 secs)
static int idle_remove_timeout(struct idle_file_data *d)
{
- idle_printk("removing timeout\n");
+ pr_debug("removing timeout\n");
hrtimer_cancel(&d->timer);
@@ -260,13 +258,13 @@ static unsigned int idle_poll(struct file *f, poll_table *pt)
unsigned int mask = POLLOUT | POLLWRNORM;
struct idle_file_data *d = f->private_data;
- idle_printk("idle_poll\n");
+ pr_debug("idle_poll\n");
spin_lock_irq(&idle_events_lock);
if (event_available(d)) {
mask |= POLLIN | POLLRDNORM;
- idle_printk("idle data available\n");
+ pr_debug("idle data available\n");
}
if (d->waiting_for_wakeup)
@@ -296,7 +294,7 @@ static int idle_new_client(void)
mutex_lock(&open_counter_mutex);
if (open_counter == 0) {
- idle_printk("first client connected\n");
+ pr_debug("first client connected\n");
last_input_event_time = ktime_get_real();
@@ -344,7 +342,7 @@ static void idle_client_leaving(void)
mutex_lock(&open_counter_mutex);
if (--open_counter == 0) {
- idle_printk("last client disconnected\n");
+ pr_debug("last client disconnected\n");
WARN_ON(unregister_keyboard_notifier(&idle_nb));
}
@@ -381,11 +379,11 @@ static int __init idle_init(void)
{
int err = 0;
- idle_printk("starting\n");
+ pr_debug("starting\n");
idle_major = register_chrdev(0, "idle", &idle_ops);
if (idle_major < 0) {
- idle_printk("cannot register device\n");
+ pr_debug("cannot register device\n");
return idle_major;
}
@@ -402,7 +400,7 @@ static int __init idle_init(void)
goto out_device;
}
- idle_printk("device major: %d\n", idle_major);
+ pr_debug("device major: %d\n", idle_major);
if (daemon_mode) {
err = idle_new_client();
@@ -423,7 +421,7 @@ out_class:
static void __exit idle_exit(void)
{
- idle_printk("exiting\n");
+ pr_debug("exiting\n");
if (daemon_mode)
idle_client_leaving();
--
1.6.0.6
next prev parent reply other threads:[~2009-03-03 14:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-02 22:42 [RFC PATCH 2/2] Add virtual "idle" device Marcin Slusarz
2009-03-03 10:00 ` Geert Uytterhoeven
2009-03-03 14:17 ` Marcin Slusarz [this message]
2009-03-06 18:43 ` Pavel Machek
2009-03-12 1:08 ` Marcin Slusarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090303141652.GA31091@joi \
--to=marcin.slusarz@gmail.com \
--cc=geert@linux-m68k.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.