From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Brownell Subject: [patch 2.6.29-rc7-omap] twl4030-regulator: list more VAUX4 voltages Date: Tue, 10 Mar 2009 11:51:15 -0800 Message-ID: <200903101251.15700.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp125.sbc.mail.sp1.yahoo.com ([69.147.65.184]:30868 "HELO smtp125.sbc.mail.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1754480AbZCJTvT (ORCPT ); Tue, 10 Mar 2009 15:51:19 -0400 Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Liam Girdwood Cc: Mark Brown , OMAP From: David Brownell The VAUX4 voltage table scrolls onto a second page in many versions of the TWL4030 family manuals. This doesn't mean we should ignore those values! Some boards use the (fully supported) 2.8V setting. Signed-off-by: David Brownell --- Please apply to both the regulator-next and OMAP trees. drivers/regulator/twl4030-regulator.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/regulator/twl4030-regulator.c +++ b/drivers/regulator/twl4030-regulator.c @@ -229,6 +229,8 @@ static const u16 VAUX3_VSEL_table[] = { static const u16 VAUX4_VSEL_table[] = { 700, 1000, 1200, UNSUP(1300), 1500, 1800, UNSUP(1850), 2500, + UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), }; static const u16 VMMC1_VSEL_table[] = { 1850, 2850, 3000, 3150,