All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian <cjs@dhp.com>
To: netdev@vger.kernel.org
Subject: skb_over_panic kernel panic
Date: Tue, 10 Mar 2009 21:10:13 -0400	[thread overview]
Message-ID: <20090311011013.GC7022@dhp.com> (raw)

Hello,

I keep getting kernel panics on my system with output similar to this:

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580
head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0
--------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580
put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa 
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource
CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P        2.6.28.7 #3
RIP: 0010:[<ffffffff80531630>] [<ffffffff80531630>] skb_put+0x7a/0x89
RSP: 0018:ffff8801bf9b3dd0 EFLAGS: 00010282

(I copied this output by hand so there may be a typo or two) 

Linux server1 2.6.28.7 #3 SMP Mon Mar 9 20:04:12 EDT 2009 x86_64
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux

Before this my kernel was 2.6.27.5 and I was still getting the same
panics.

eth0: RTL8168c/8111c at 0xffffc20000042000, 00:23:54:ed:7f:a6, XID
3c4000c0 IRQ 18
r8169: eth0: link up

00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to
ESI Port (rev 12)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 1 (rev 12)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 3 (rev 12)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 7 (rev 12)
00:10.0 PIC: Intel Corporation QuickPath Interconnect Physical and Link
Layer Registers Port 0 (rev 12)
00:10.1 PIC: Intel Corporation QuickPath Interconnect Routing and
Protocol Layer Registers Port 0 (rev 12)
00:13.0 PIC: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC
Interrupt Controller (rev 12)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System
Management Registers (rev 12)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and
Scratch Pad Registers (rev 12)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control
Status and RAS Registers (rev 12)
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle
Registers (rev 12)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300
LE] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
08:00.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
08:01.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
300 TX4) (rev 02)

# lsmod
Module                  Size  Used by
nvidia               7797560  0 



             reply	other threads:[~2009-03-11  2:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-11  1:10 Christian [this message]
2009-03-11  3:07 ` skb_over_panic kernel panic Christian
2009-03-13 21:22 ` Francois Romieu
2009-03-13 21:36   ` Christian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090311011013.GC7022@dhp.com \
    --to=cjs@dhp.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.