From: Ralf Baechle <ralf@linux-mips.org>
To: linux-mips@linux-mips.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Subject: __do_IRQ() going away
Date: Wed, 11 Mar 2009 12:28:06 +0100 [thread overview]
Message-ID: <20090311112806.GA24541@linux-mips.org> (raw)
__do_IRQ() is deprecated since a long time and there are plans to remove
it for 2.6.30. The MIPS platforms seem to fall into three classes:
o Platforms setting CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ to explicitly disable
__do_IRQ():
capcella_defconfig, cobalt_defconfig, e55_defconfig,
fulong_defconfig, ip27_defconfig, jazz_defconfig, jmr3927_defconfig,
lasat_defconfig, mpc30x_defconfig, pnx8335-stb225_defconfig,
pnx8550-jbs_defconfig, pnx8550-stb810_defconfig, rb532_defconfig,
rbtx49xx_defconfig, tb0219_defconfig, tb0226_defconfig,
tb0287_defconfig and workpad_defconfig.
o Platforms that don't set CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ but don't
seem to use __do_IRQ():
bcm47xx_defconfig, cavium-octeon_defconfig, excite_defconfig,
ip22_defconfig, ip28_defconfig, msp71xx_defconfig, wrppmc_defconfig,
o Platforms that still seem to rely on __do_IRQ():
o All Sibyte platforms:
bigsur_defconfig and sb1250-swarm_defconfig
o All Alchemy platforms:
db1000_defconfig, db1100_defconfig, db1200_defconfig, db1500_defconfig,
db1550_defconfig, mtx1_defconfig, pb1100_defconfig, pb1500_defconfig
and pb1550_defconfig
o malta_defconfig. The platform code itself is ok but irq-gic.c,
irq-msc01.c, irq-msc01.c and irq_cpu.c are still using set_irq_chip
and need fixing.
o And the rest:
decstation_defconfig, emma2rh_defconfig, ip32_defconfig,
yosemite_defconfig, mipssim_defconfig and rm200_defconfig.
For now I've checked in the following patch into linux-queue.
Ralf
MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms
__do_IRQ() is deprecated and will go away.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -77,7 +77,6 @@ config MIPS_COBALT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config MACH_DECSTATION
bool "DECstations"
@@ -132,7 +131,6 @@ config MACH_JAZZ
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_100HZ
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
@@ -154,7 +152,6 @@ config LASAT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
@@ -175,7 +172,6 @@ config LEMOTE_FULONG
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select CPU_HAS_WB
help
@@ -246,7 +242,6 @@ config MACH_VR41XX
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
- select GENERIC_HARDIRQS_NO__DO_IRQ
config NXP_STB220
bool "NXP STB220 board"
@@ -360,7 +355,6 @@ config SGI_IP27
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -559,7 +553,6 @@ config MIKROTIK_RB532
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select GENERIC_HARDIRQS_NO__DO_IRQ
select HW_HAS_PCI
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@@ -697,8 +690,7 @@ config SCHED_OMIT_FRAME_POINTER
default y
config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- default n
+ def_bool y
#
# Select some configuration options automatically based on user selections.
@@ -905,7 +897,6 @@ config SOC_PNX833X
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
select CPU_MIPSR2_IRQ_VI
@@ -924,7 +915,6 @@ config SOC_PNX8550
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
config SWAP_IO_SPACE
next reply other threads:[~2009-03-11 11:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-11 11:28 Ralf Baechle [this message]
2009-03-11 23:23 ` __do_IRQ() going away Markus Gothe
2009-03-12 7:26 ` Manuel Lauss
2009-03-12 9:28 ` Ralf Baechle
2009-03-12 9:46 ` Manuel Lauss
2009-03-12 11:20 ` Ralf Baechle
2009-03-13 15:31 ` MIPS: EMMA2RH: Use handle_edge_irq() handler for GPIO interrupts Shinya Kuribayashi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090311112806.GA24541@linux-mips.org \
--to=ralf@linux-mips.org \
--cc=linux-mips@linux-mips.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.