All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@caiaq.de>
To: pHilipp Zabel <philipp.zabel@gmail.com>
Cc: alsa-devel@alsa-project.org, Mark Brown <broonie@sirena.org.uk>
Subject: Re: snd-soc-pxa-ssp I2C/FIFO issues
Date: Wed, 11 Mar 2009 19:42:14 +0100	[thread overview]
Message-ID: <20090311184214.GE29871@buzzloop.caiaq.de> (raw)
In-Reply-To: <74d0deb30903111110h4e441959yec421225a4b90cc9@mail.gmail.com>

On Wed, Mar 11, 2009 at 07:10:28PM +0100, pHilipp Zabel wrote:
> Tested-by me. Of course this still doesn't help me to enable 16-bit
> DMA transfers for stereo, but it doesn't hurt either.

Ok, new version below.

Daniel


>From ad8734e93eed130a55482b0e937729578e6d93c8 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 11 Mar 2009 19:38:15 +0100
Subject: [PATCH] pxa-ssp: switch from network mode to PSP

This switches the pxa ssp port usage from network mode to PSP mode.
Removed some comments and checks for configured TDM channels.
A special case is added to support configuration where BCLK = 64fs. We
need to do some black magic in this case which doesn't look nice but
there is unfortunately no other option than that.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
---
 sound/soc/pxa/pxa-ssp.c |   44 +++++++++++++++++++++++++++++++++-----------
 1 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 52d97c4..3cde686 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -558,18 +558,17 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
-		sscr0 |= SSCR0_MOD | SSCR0_PSP;
+		sscr0 |= SSCR0_PSP;
 		sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
 
 		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 		case SND_SOC_DAIFMT_NB_NF:
-			sspsp |= SSPSP_FSRT;
 			break;
 		case SND_SOC_DAIFMT_NB_IF:
-			sspsp |= SSPSP_SFRMP | SSPSP_FSRT;
+			sspsp |= SSPSP_SFRMP;
 			break;
 		case SND_SOC_DAIFMT_IB_IF:
-			sspsp |= SSPSP_SFRMP;
+			sspsp |= SSPSP_SFRMP | SSPSP_SCMODE(3);
 			break;
 		default:
 			return -EINVAL;
@@ -655,33 +654,56 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
 			sscr0 |= SSCR0_FPCKE;
 #endif
 		sscr0 |= SSCR0_DataSize(16);
-		/* use network mode (2 slots) for 16 bit stereo */
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
 		sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
-		/* we must be in network mode (2 slots) for 24 bit stereo */
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
 		sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
-		/* we must be in network mode (2 slots) for 32 bit stereo */
 		break;
 	}
 	ssp_write_reg(ssp, SSCR0, sscr0);
 
 	switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
-		/* Cleared when the DAI format is set */
-		sspsp = ssp_read_reg(ssp, SSPSP) | SSPSP_SFRMWDTH(width);
+	       sspsp = ssp_read_reg(ssp, SSPSP);
+
+		if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
+		     (width == 16)) {
+			/* This is a special case where the bitclk is 64fs
+			* and we're not dealing with 2*32 bits of audio
+			* samples.
+			*
+			* The SSP values used for that are all found out by
+			* trying and failing a lot; some of the registers
+			* needed for that mode are only available on PXA3xx.
+			*/
+
+#ifdef CONFIG_PXA3xx
+			if (!cpu_is_pxa3xx())
+				return -EINVAL;
+
+			sspsp |= SSPSP_SFRMWDTH(width * 2);
+			sspsp |= SSPSP_SFRMDLY(width * 4);
+			sspsp |= SSPSP_EDMYSTOP(3);
+			sspsp |= SSPSP_DMYSTOP(3);
+			sspsp |= SSPSP_DMYSTRT(1);
+#else
+			return -EINVAL;
+#endif
+		} else
+			sspsp |= SSPSP_SFRMWDTH(width);
+
 		ssp_write_reg(ssp, SSPSP, sspsp);
 		break;
 	default:
 		break;
 	}
 
-	/* We always use a network mode so we always require TDM slots
+	/* When we use a network mode, we always require TDM slots
 	 * - complain loudly and fail if they've not been set up yet.
 	 */
-	if (!(ssp_read_reg(ssp, SSTSA) & 0xf)) {
+	if ((sscr0 & SSCR0_MOD) && !(ssp_read_reg(ssp, SSTSA) & 0xf)) {
 		dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
 		return -EINVAL;
 	}
-- 
1.6.2

      parent reply	other threads:[~2009-03-11 18:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-09 14:47 snd-soc-pxa-ssp I2C/FIFO issues pHilipp Zabel
2009-03-09 15:03 ` Liam Girdwood
2009-03-09 15:14   ` Mark Brown
2009-03-09 16:01   ` pHilipp Zabel
2009-03-09 16:16   ` Daniel Mack
2009-03-09 15:36 ` Daniel Mack
2009-03-09 16:00   ` pHilipp Zabel
2009-03-09 17:44   ` Mark Brown
2009-03-10 15:47     ` Daniel Mack
2009-03-11 18:10       ` pHilipp Zabel
2009-03-11 18:21         ` Daniel Mack
2009-03-11 18:42         ` Daniel Mack [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090311184214.GE29871@buzzloop.caiaq.de \
    --to=daniel@caiaq.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@sirena.org.uk \
    --cc=philipp.zabel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.