All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alessandro Rubini <rubini-list@gnudd.com>
To: linux-mtd@lists.infradead.org
Cc: STEricsson_nomadik_linux@list.st.com, andrea.gallo@stericsson.com
Subject: [PATCH] OneNand driver for Nomadik 8815 SoC (on NHK8815 board)
Date: Fri, 13 Mar 2009 01:31:24 +0100	[thread overview]
Message-ID: <20090313003124.GA13328@mail.gnudd.com> (raw)

From: Alessandro Rubini <rubini@unipv.it>

Add the platform_device and the configuration used to activate
the OneNand device found on the NHK8815 evaluation kit.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
---

This patch depends on the ones I sent earlier: basic nomadik
suppport (sent to linux-arm-kenrel) and nand driver (sent to
linux-arm-kernel and linux-mtd). This is sent to linux-mtd only.

 arch/arm/configs/nhk15_defconfig      |    9 +++-
 arch/arm/mach-nomadik/board-8815nhk.c |   67 +++++++++++++++++++++++++++++++++
 2 files changed, 74 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/nhk15_defconfig b/arch/arm/configs/nhk15_defconfig
index 1697efe..ea99b34 100644
--- a/arch/arm/configs/nhk15_defconfig
+++ b/arch/arm/configs/nhk15_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.29-rc7
-# Thu Mar 12 00:30:32 2009
+# Fri Mar 13 00:06:15 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -477,7 +477,12 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_NOMADIK=y
-# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
 
 #
 # LPDDR flash memory drivers
diff --git a/arch/arm/mach-nomadik/board-8815nhk.c b/arch/arm/mach-nomadik/board-8815nhk.c
index 1e5b332..6ed9760 100644
--- a/arch/arm/mach-nomadik/board-8815nhk.c
+++ b/arch/arm/mach-nomadik/board-8815nhk.c
@@ -27,6 +27,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
+#include <asm/mach/flash.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/nand.h>
@@ -115,9 +116,74 @@ static struct platform_device nhk8815_nand_device = {
 	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
 };
 
+/* These are the partitions for the OneNand device, different from above */
+static struct mtd_partition nhk8815_onenand_partitions[] = {
+	{
+		.name	= "X-Loader(OneNAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M-SZ_256K,
+	}, {
+		.name	= "U-Boot Environment(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "SysImage(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22* SZ_1M,
+	}, {
+		.name	= "User Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct flash_platform_data nhk8815_onenand_data = {
+	.parts		= nhk8815_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
+};
+
+static struct resource nhk8815_onenand_resource[] = {
+	{
+		.start		= 0x30000000,
+		.end		= 0x30000000 + SZ_128K -1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nhk8815_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &nhk8815_onenand_data,
+	},
+	.resource	= nhk8815_onenand_resource,
+	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
+};
+
+static void __init nhk8815_onenand_init(void)
+{
+#ifdef CONFIG_ONENAND
+       /* Set up SMCS0 for OneNand */
+       writel(0x000030db, FSMC_BCR0);
+       writel(0x02100551, FSMC_BTR0);
+#endif
+}
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
 	&nhk8815_nand_device,
+	&nhk8815_onenand_device,
 	/* will add keypad, touchscreen etc */
 };
 
@@ -129,6 +195,7 @@ static void __init nhk8815_map_io(void)
 static void __init nhk8815_platform_init(void)
 {
 	cpu8815_platform_init();
+	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 }
-- 
1.6.0.2

                 reply	other threads:[~2009-03-13  0:31 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090313003124.GA13328@mail.gnudd.com \
    --to=rubini-list@gnudd.com \
    --cc=STEricsson_nomadik_linux@list.st.com \
    --cc=andrea.gallo@stericsson.com \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.