From: Ingo Molnar <mingo@elte.hu>
To: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] tracing/ftrace: stop {irqs,preempt}soff tracers when tracing is stopped
Date: Wed, 18 Mar 2009 10:29:29 +0100 [thread overview]
Message-ID: <20090318092929.GA8475@elte.hu> (raw)
In-Reply-To: <20090318091842.GA29053@elte.hu>
[-- Attachment #1: Type: text/plain, Size: 3547 bytes --]
* Ingo Molnar <mingo@elte.hu> wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > > I discussed about that with Steven on irc, and for now the v1
> > > should be applied as a temporary solution. We plan to simplify
> > > later the start/stop callbacks from each tracers that need it.
> >
> > ok. Steve, could you please pick v1 up?
>
> Committed it after all - there's more self-test failures (reported
> them earlier today) and i've picked up all fixlets that might fix
> them.
it's still happening even with all fixes applied, on latest -tip:
[ 3.132006] calling init_irqsoff_tracer+0x0/0x11 @ 1
[ 3.137005] Testing tracer irqsoff: <4>------------[ cut here ]------------
[ 3.141002] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xaf/0x140()
[ 3.141002] Hardware name: System Product Name
[ 3.141002] Modules linked in:
[ 3.141002] Pid: 1, comm: swapper Not tainted 2.6.29-rc8-tip-02702-ge0d2c41-dirty #20985
[ 3.141002] Call Trace:
[ 3.141002] [<c10488c6>] warn_slowpath+0x76/0xb0
[ 3.141002] [<c147dda1>] ? _spin_lock_irq+0x11/0x30
[ 3.141002] [<c1050304>] ? run_timer_softirq+0x174/0x180
[ 3.141002] [<c104d01b>] ? _local_bh_enable+0x8b/0xa0
[ 3.141002] [<c104d1a2>] ? __do_softirq+0x172/0x180
[ 3.141002] [<c1074444>] ? ring_buffer_reset_cpu+0x24/0xe0
[ 3.141002] [<c10744ed>] ? ring_buffer_reset_cpu+0xcd/0xe0
[ 3.141002] [<c147dcb9>] ? _spin_unlock_irqrestore+0x19/0x30
[ 3.141002] [<c107c721>] ? trace_hardirqs_off+0x21/0x30
[ 3.141002] [<c147dcb9>] ? _spin_unlock_irqrestore+0x19/0x30
[ 3.141002] [<c10744ed>] ? ring_buffer_reset_cpu+0xcd/0xe0
[ 3.141002] [<c107990f>] update_max_tr_single+0xaf/0x140
[ 3.141002] [<c107c8bc>] stop_critical_timing+0x15c/0x210
[ 3.141002] [<c1079f8d>] ? register_tracer+0x10d/0x200
[ 3.141002] [<c107c9b1>] trace_hardirqs_on+0x21/0x30
[ 3.141002] [<c107a263>] trace_selftest_startup_irqsoff+0x53/0xb0
[ 3.141002] [<c16fb8a2>] ? init_irqsoff_tracer+0x0/0x11
[ 3.141002] [<c1079f8d>] register_tracer+0x10d/0x200
[ 3.141002] [<c16fb8a2>] ? init_irqsoff_tracer+0x0/0x11
[ 3.141002] [<c16fb8af>] init_irqsoff_tracer+0xd/0x11
[ 3.141002] [<c100107a>] do_one_initcall+0x6a/0x170
[ 3.141002] [<c1090d63>] ? zone_statistics+0x63/0x70
[ 3.141002] [<c10886a6>] ? __alloc_pages_internal+0xa6/0x390
[ 3.141002] [<c11a58aa>] ? put_dec+0x2a/0x100
[ 3.141002] [<c10a1a14>] ? check_valid_pointer+0x24/0x60
[ 3.141002] [<c10a2041>] ? check_object+0x131/0x170
[ 3.141002] [<c10a28a4>] ? __slab_free+0x274/0x2a0
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c10a428f>] ? kmem_cache_free+0x8f/0xa0
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c11a197f>] ? idr_pre_get+0x4f/0x60
[ 3.141002] [<c10e0d43>] ? proc_register+0x103/0x150
[ 3.141002] [<c10e0ec0>] ? create_proc_entry+0x80/0xa0
[ 3.141002] [<c106e278>] ? init_irq_proc+0x58/0x70
[ 3.141002] [<c16e95db>] kernel_init+0x104/0x155
[ 3.141002] [<c16e94d7>] ? kernel_init+0x0/0x155
[ 3.141002] [<c101f8e3>] kernel_thread_helper+0x7/0x10
[ 3.141002] ---[ end trace 5a5d197966b56a2e ]---
[ 3.376012] .. no entries found ..FAILED!
[ 3.380006] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 237304 usecs
[ 3.388006] calling init_wakeup_tracer+0x0/0x1d @ 1
Config and log attached.
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 58132 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc8
# Wed Mar 18 10:16:48 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
# CONFIG_BROKEN_BOOT_ALLOWED2 is not set
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_IBS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP_SUPPORT=y
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_MIGRATE_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_NUMAQ=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_MEMTEST=y
CONFIG_X86_SUMMIT_NUMA=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
CONFIG_MCRUSOE=y
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
CONFIG_SMP=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_HAVE_ARCH_BOOTMEM=y
CONFIG_ARCH_HAVE_MEMORY_PRESENT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_HAVE_ARCH_ALLOC_REMAP=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
#
# Power management and ACPI options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K6=m
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
CONFIG_X86_GX_SUSPMOD=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_ASK_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE=y
# CONFIG_IP_FIB_HASH is not set
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=m
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CONNTRACK_FTP is not set
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_SIP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
# CONFIG_IP_VS_SH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_NF_NAT_FTP is not set
CONFIG_NF_NAT_IRC=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
# CONFIG_ATM_BR2684 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
# CONFIG_NET_DSA_TAG_EDSA is not set
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
# CONFIG_IPDDP is not set
CONFIG_X25=y
CONFIG_LAPB=m
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
# CONFIG_6PACK is not set
# CONFIG_BPQETHER is not set
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_VLSI_FIR=m
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=m
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=m
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
CONFIG_SATA_INIC162X=y
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=m
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_LEGACY=m
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_NS87415=y
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=y
CONFIG_PATA_RADISYS=m
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
# CONFIG_IEEE1394_SBP2 is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=y
# CONFIG_TUN is not set
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=m
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_VORTEX=y
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_ULTRA=m
# CONFIG_ULTRA32 is not set
CONFIG_SMC9194=m
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_VENDOR_RACAL=y
# CONFIG_NI52 is not set
CONFIG_NI65=m
CONFIG_DNET=m
# CONFIG_NET_TULIP is not set
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
CONFIG_HP100=m
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_AC3200=m
CONFIG_APRICOT=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_CS89x0=m
CONFIG_E100=y
CONFIG_LNE390=m
CONFIG_FEALNX=m
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
CONFIG_8139CP=m
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=y
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=m
CONFIG_IGB=y
CONFIG_IGB_LRO=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
CONFIG_SIS190=y
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
CONFIG_JME=m
# CONFIG_NETDEV_10000 is not set
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=y
CONFIG_3C359=m
CONFIG_TMS380TR=y
CONFIG_TMSPCI=m
# CONFIG_SKISA is not set
# CONFIG_PROTEON is not set
CONFIG_ABYSS=y
CONFIG_SMCTR=m
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
CONFIG_ARLAN=m
CONFIG_WAVELAN=y
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET is not set
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
# CONFIG_SEALEVEL_4021 is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=y
# CONFIG_N2 is not set
# CONFIG_C101 is not set
CONFIG_FARSYNC=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
# CONFIG_DSCC4_PCI_RST is not set
# CONFIG_DLCI is not set
CONFIG_WAN_ROUTER_DRIVERS=m
# CONFIG_CYCLADES_SYNC is not set
# CONFIG_LAPBETHER is not set
CONFIG_X25_ASY=m
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=m
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
CONFIG_ATM_NICSTAR_USE_IDT77105=y
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
# CONFIG_ISDN_AUDIO is not set
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
# CONFIG_HISAX_NO_KEYPAD is not set
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_TELESPCI is not set
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
# CONFIG_HISAX_SEDLBAUER is not set
CONFIG_HISAX_SPORTSTER=y
# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
# CONFIG_HISAX_NETJET_U is not set
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
# CONFIG_HISAX_W6692 is not set
# CONFIG_HISAX_HFC_SX is not set
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=y
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_HYSDN=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_BASE is not set
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
CONFIG_GIGASET_DEBUG=y
# CONFIG_GIGASET_UNDOCREQ is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=m
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_POWERMATE=y
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=m
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=m
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=y
# CONFIG_SX is not set
CONFIG_RIO=y
# CONFIG_RIO_OLDPCI is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_SERIAL_8250_ACCENT=m
# CONFIG_SERIAL_8250_BOCA is not set
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=m
CONFIG_DTLK=y
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_STUB is not set
CONFIG_SCx200_ACB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=y
CONFIG_SENSORS_PCA9539=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=m
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=m
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_BQ27x00=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=m
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=y
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_HTC_PASIC3=m
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=m
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
CONFIG_BACKLIGHT_SAHARA=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE=y
#
# Special HID drivers
#
# CONFIG_HID_COMPAT is not set
CONFIG_HID_A4TECH=m
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_GYRATION is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_GREENASIA_FF=m
# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_VST=m
# CONFIG_USB_ATM is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_TWL4030_USB=m
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=m
CONFIG_UWB_WLP=y
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=y
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_SMX is not set
CONFIG_UIO_SERCOS3=y
CONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_OCFS2_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_REGISTER_V4=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_EVENT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BOOT_TRACER=y
CONFIG_POWER_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_HW_BRANCH_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_MMIOTRACE=y
CONFIG_MMIOTRACE_TEST=m
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_DYNAMIC_PRINTK_DEBUG=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_MARKERS=m
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
CONFIG_KVM_TRACE=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y
[-- Attachment #3: log --]
[-- Type: text/plain, Size: 124665 bytes --]
[ 0.000000] Linux version 2.6.29-rc8-tip-02702-ge0d2c41-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #20985 SMP Wed Mar 18 10:17:17 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
[ 0.000000] CPU: Your system may be unstable.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] console [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] get_mtrr: cpu0 reg00 base=0000000000 size=0000040000 write-back
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5680] f5680
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] mpc: f1400-f152c
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Warning! Not a NUMA-Q system!
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fff0
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000
[ 0.000000] node 0 pfn: [0 - 3fff0]
[ 0.000000] Reserving 2560 pages of KVA for lmem_map of node 0 at 3f400
[ 0.000000] remove_active_range (0, 259072, 261632)
[ 0.000000] Reserving total of a00 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36e00 max_low_pfn ~ 379fe
[ 0.000000] max_pfn = 3fff0
[ 0.000000] 133MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] max_low_pfn = 379fe, highstart_pfn = 379fe
[ 0.000000] Low memory ends at vaddr f79fe000
[ 0.000000] node 0 will remap to vaddr f6e00000 - f7800000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6e00000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6e00000 to pfn 0003f400
[ 0.000000] remap_numa_kva: f7000000 to pfn 0003f600
[ 0.000000] remap_numa_kva: f7200000 to pfn 0003f800
[ 0.000000] remap_numa_kva: f7400000 to pfn 0003fa00
[ 0.000000] remap_numa_kva: f7600000 to pfn 0003fc00
[ 0.000000] High memory starts at vaddr f79fe000
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f40
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00018b3fb0] TEXT DATA BSS ==> [0001000000 - 00018b3fb0]
[ 0.000000] #4 [00018b4000 - 00018c5000] INIT_PG_TABLE ==> [00018b4000 - 00018c5000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [003f400000 - 003fe00000] KVA RAM
[ 0.000000] #8 [0036e00000 - 0037800000] KVA PG ==> [0036e00000 - 0037800000]
[ 0.000000] #9 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5680] f5680
[ 0.000000] mpc: f1400-f152c
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f400
[ 0.000000] 0: 0x0003fe00 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 259455
[ 0.000000] free_area_init_node: node 0, pgdat f6e00000, node_mem_map f6e02200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 268 pages used for memmap
[ 0.000000] HighMem zone: 31462 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] mpc: f1400-f152c
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Warning! Not a NUMA-Q system!
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Bus #0 is PCI
[ 0.000000] Bus #1 is PCI
[ 0.000000] Bus #2 is PCI
[ 0.000000] Bus #3 is PCI
[ 0.000000] Bus #4 is PCI
[ 0.000000] Bus #5 is PCI
[ 0.000000] Bus #6 is ISA
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:16
[ 0.000000] PERCPU: Embedded 15 pages at c18ca000, static data 39612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257407
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1
[ 0.000000] debug: sysrq always enabled.
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.502 MHz processor.
[ 0.000999] spurious 8259A interrupt: IRQ7.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Initializing HighMem for node 0 (000379fe:0003fff0)
[ 0.000999] Memory: 1017592k/1048512k available (4615k kernel code, 20228k reserved, 2424k data, 424k init, 126920k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
[ 0.000999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000999] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000999] .init : 0xc16e9000 - 0xc1753000 ( 424 kB)
[ 0.000999] .data : 0xc1481e66 - 0xc16e0144 (2424 kB)
[ 0.000999] .text : 0xc1000000 - 0xc1481e66 (4615 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=16
[ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.00 BogoMIPS (lpj=2010502)
[ 0.003070] Security Framework initialized
[ 0.004029] Mount-cache hash table entries: 512
[ 0.005377] Checking 'hlt' instruction... OK.
[ 0.010702] Freeing SMP alternatives: 18k freed
[ 0.011015] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.012004] ftrace: allocating 20460 entries in 41 pages
[ 0.014133] enabled ExtINT on CPU#0
[ 0.015046] ExtINT not setup in hardware but reported by MP table
[ 0.016083] Mapping cpu 0 to node 0
[ 0.016999] ENABLING IO-APIC IRQs
[ 0.017999] init IO_APIC IRQs
[ 0.018999] 2-0 (apicid-pin) not connected
[ 0.021004] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.022003] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.023002] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
[ 0.023996] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
[ 0.023996] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
[ 0.023996] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.023996] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.023996] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[ 0.023996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.023996] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.023996] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.023996] ..... (found apic 0 pin 0) ...
[ 0.034522] ....... works.
[ 0.034995] CPU0: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.038995] Using local APIC timer interrupts.
[ 0.038996] calibrating APIC timer ...
[ 0.040993] ... lapic delta = 1256243
[ 0.040993] ..... delta 1256243
[ 0.040993] ..... mult: 53963428
[ 0.040993] ..... calibration result: 200998
[ 0.040993] ..... CPU clock speed is 2009.0989 MHz.
[ 0.040993] ..... host bus clock speed is 200.0998 MHz.
[ 0.040993] ... verify APIC timer
[ 0.143454] ... jiffies delta = 100
[ 0.143979] ... jiffies result ok
[ 0.144997] calling migration_init+0x0/0x4b @ 1
[ 0.146013] initcall migration_init+0x0/0x4b returned 1 after 0 usecs
[ 0.146981] initcall migration_init+0x0/0x4b returned with error code 1
[ 0.147980] calling spawn_ksoftirqd+0x0/0x47 @ 1
[ 0.149004] initcall spawn_ksoftirqd+0x0/0x47 returned 0 after 0 usecs
[ 0.149981] calling init_call_single_data+0x0/0x53 @ 1
[ 0.150980] initcall init_call_single_data+0x0/0x53 returned 0 after 0 usecs
[ 0.151979] calling relay_init+0x0/0x7 @ 1
[ 0.152979] initcall relay_init+0x0/0x7 returned 0 after 0 usecs
[ 0.153979] calling tracer_alloc_buffers+0x0/0x198 @ 1
[ 0.155079] Testing tracer nop: PASSED
[ 0.156981] initcall tracer_alloc_buffers+0x0/0x198 returned 0 after 1952 usecs
[ 0.157978] calling init_trace_printk+0x0/0xf @ 1
[ 0.158979] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[ 0.159978] calling trace_workqueue_early_init+0x0/0xe1 @ 1
[ 0.161009] initcall trace_workqueue_early_init+0x0/0xe1 returned 0 after 0 usecs
[ 0.161978] calling perf_counter_init+0x0/0x27 @ 1
[ 0.162979] initcall perf_counter_init+0x0/0x27 returned 0 after 0 usecs
[ 0.164070] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] masked ExtINT on CPU#1
[ 0.000999] Mapping cpu 1 to node 0
[ 0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009954)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.236393] CPU1: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.239981] Brought up 2 CPUs
[ 0.240965] Total of 2 processors activated (8040.91 BogoMIPS).
[ 0.243254] calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
[ 0.243968] initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
[ 0.244966] calling net_ns_init+0x0/0xf8 @ 1
[ 0.245964] net_namespace: 1012 bytes
[ 0.246967] initcall net_ns_init+0x0/0xf8 returned 0 after 976 usecs
[ 0.247965] calling cpufreq_tsc+0x0/0x25 @ 1
[ 0.248965] initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
[ 0.249965] calling reboot_init+0x0/0x11 @ 1
[ 0.250970] initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
[ 0.251964] calling init_smp_flush+0x0/0x23 @ 1
[ 0.252964] initcall init_smp_flush+0x0/0x23 returned 0 after 0 usecs
[ 0.253964] calling sysctl_init+0x0/0x29 @ 1
[ 0.256057] initcall sysctl_init+0x0/0x29 returned 0 after 976 usecs
[ 0.256963] calling ksysfs_init+0x0/0x96 @ 1
[ 0.258021] initcall ksysfs_init+0x0/0x96 returned 0 after 0 usecs
[ 0.258963] calling async_init+0x0/0x3c @ 1
[ 0.259988] initcall async_init+0x0/0x3c returned 0 after 0 usecs
[ 0.260963] calling init_jiffies_clocksource+0x0/0xf @ 1
[ 0.261965] initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
[ 0.262963] calling filelock_init+0x0/0x27 @ 1
[ 0.263966] initcall filelock_init+0x0/0x27 returned 0 after 0 usecs
[ 0.264962] calling init_aout_binfmt+0x0/0xf @ 1
[ 0.265962] initcall init_aout_binfmt+0x0/0xf returned 0 after 0 usecs
[ 0.266961] calling init_script_binfmt+0x0/0xf @ 1
[ 0.267962] initcall init_script_binfmt+0x0/0xf returned 0 after 0 usecs
[ 0.268961] calling init_elf_binfmt+0x0/0xf @ 1
[ 0.269961] initcall init_elf_binfmt+0x0/0xf returned 0 after 0 usecs
[ 0.270961] calling debugfs_init+0x0/0x41 @ 1
[ 0.271967] initcall debugfs_init+0x0/0x41 returned 0 after 0 usecs
[ 0.272961] calling securityfs_init+0x0/0x41 @ 1
[ 0.273971] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
[ 0.274961] calling random32_init+0x0/0xa8 @ 1
[ 0.275961] initcall random32_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.276960] calling regulator_init+0x0/0x23 @ 1
[ 0.277959] regulator: core version 0.5
[ 0.280021] initcall regulator_init+0x0/0x23 returned 0 after 1952 usecs
[ 0.280977] calling cpufreq_core_init+0x0/0x5a @ 1
[ 0.281960] initcall cpufreq_core_init+0x0/0x5a returned 0 after 0 usecs
[ 0.282960] calling virtio_init+0x0/0x30 @ 1
[ 0.284020] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.284959] calling sock_init+0x0/0x51 @ 1
[ 0.286008] initcall sock_init+0x0/0x51 returned 0 after 0 usecs
[ 0.286959] calling netpoll_init+0x0/0x2f @ 1
[ 0.287959] initcall netpoll_init+0x0/0x2f returned 0 after 0 usecs
[ 0.288958] calling netlink_proto_init+0x0/0x101 @ 1
[ 0.289990] NET: Registered protocol family 16
[ 0.290973] initcall netlink_proto_init+0x0/0x101 returned 0 after 976 usecs
[ 0.291958] calling bdi_class_init+0x0/0x35 @ 1
[ 0.293014] initcall bdi_class_init+0x0/0x35 returned 0 after 0 usecs
[ 0.293958] calling kobject_uevent_init+0x0/0x3f @ 1
[ 0.294983] initcall kobject_uevent_init+0x0/0x3f returned 0 after 0 usecs
[ 0.295957] calling pcibus_class_init+0x0/0x14 @ 1
[ 0.297015] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
[ 0.297957] calling pci_driver_init+0x0/0xf @ 1
[ 0.299011] initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
[ 0.299957] calling backlight_class_init+0x0/0x4d @ 1
[ 0.300996] initcall backlight_class_init+0x0/0x4d returned 0 after 0 usecs
[ 0.301956] calling video_output_class_init+0x0/0x14 @ 1
[ 0.304010] initcall video_output_class_init+0x0/0x14 returned 0 after 976 usecs
[ 0.304956] calling tty_class_init+0x0/0x28 @ 1
[ 0.306010] initcall tty_class_init+0x0/0x28 returned 0 after 0 usecs
[ 0.306957] calling vtconsole_class_init+0x0/0xa1 @ 1
[ 0.308012] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.308956] calling register_node_type+0x0/0x39 @ 1
[ 0.310009] initcall register_node_type+0x0/0x39 returned 0 after 0 usecs
[ 0.310956] calling spi_init+0x0/0x95 @ 1
[ 0.312011] initcall spi_init+0x0/0x95 returned 0 after 0 usecs
[ 0.312954] calling i2c_init+0x0/0x54 @ 1
[ 0.314011] i2c-core: driver [dummy] registered
[ 0.314955] initcall i2c_init+0x0/0x54 returned 0 after 976 usecs
[ 0.315954] calling eisa_init+0x0/0x26 @ 1
[ 0.317028] EISA bus registered
[ 0.317994] initcall eisa_init+0x0/0x26 returned 0 after 996 usecs
[ 0.318999] calling amd_postcore_init+0x0/0x66 @ 1
[ 0.320002] initcall amd_postcore_init+0x0/0x66 returned 0 after 0 usecs
[ 0.321003] calling arch_kdebugfs_init+0x0/0x1e @ 1
[ 0.322007] initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
[ 0.323003] calling init_pit_clocksource+0x0/0x95 @ 1
[ 0.324003] initcall init_pit_clocksource+0x0/0x95 returned 0 after 0 usecs
[ 0.325003] calling mtrr_if_init+0x0/0x58 @ 1
[ 0.326007] initcall mtrr_if_init+0x0/0x58 returned 0 after 0 usecs
[ 0.327002] calling kdump_buf_page_init+0x0/0x59 @ 1
[ 0.328015] initcall kdump_buf_page_init+0x0/0x59 returned 0 after 0 usecs
[ 0.329002] calling init_cyclone_clocksource+0x0/0x17d @ 1
[ 0.330003] initcall init_cyclone_clocksource+0x0/0x17d returned -19 after 0 usecs
[ 0.331002] calling pci_arch_init+0x0/0x45 @ 1
[ 0.336847] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[ 0.337001] PCI: Using configuration type 1 for base access
[ 0.338012] initcall pci_arch_init+0x0/0x45 returned 0 after 5859 usecs
[ 0.339002] calling topology_init+0x0/0x80 @ 1
[ 0.341016] initcall topology_init+0x0/0x80 returned 0 after 976 usecs
[ 0.342003] calling mtrr_init_finialize+0x0/0x35 @ 1
[ 0.343003] initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
[ 0.344003] calling param_sysfs_init+0x0/0x1c0 @ 1
[ 0.362278] initcall param_sysfs_init+0x0/0x1c0 returned 0 after 16601 usecs
[ 0.369004] calling readahead_init+0x0/0x2f @ 1
[ 0.374153] initcall readahead_init+0x0/0x2f returned 0 after 0 usecs
[ 0.380003] calling init_bio+0x0/0xa9 @ 1
[ 0.384046] bio: create slab <bio-0> at 0
[ 0.388048] initcall init_bio+0x0/0xa9 returned 0 after 3906 usecs
[ 0.394004] calling cryptomgr_init+0x0/0x29 @ 1
[ 0.399013] initcall cryptomgr_init+0x0/0x29 returned 0 after 0 usecs
[ 0.405003] calling blk_settings_init+0x0/0x1d @ 1
[ 0.410003] initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
[ 0.417003] calling blk_ioc_init+0x0/0x24 @ 1
[ 0.421006] initcall blk_ioc_init+0x0/0x24 returned 0 after 0 usecs
[ 0.428003] calling blk_softirq_init+0x0/0x4c @ 1
[ 0.432003] initcall blk_softirq_init+0x0/0x4c returned 0 after 0 usecs
[ 0.439003] calling genhd_device_init+0x0/0x50 @ 1
[ 0.444035] initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
[ 0.450004] calling pci_slot_init+0x0/0x40 @ 1
[ 0.455028] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.461003] calling pnp_init+0x0/0xf @ 1
[ 0.465062] initcall pnp_init+0x0/0xf returned 0 after 0 usecs
[ 0.471003] calling misc_init+0x0/0x84 @ 1
[ 0.475068] initcall misc_init+0x0/0x84 returned 0 after 0 usecs
[ 0.481004] calling twl4030_init+0x0/0x11 @ 1
[ 0.486057] i2c-core: driver [twl4030] registered
[ 0.490004] initcall twl4030_init+0x0/0x11 returned 0 after 3906 usecs
[ 0.497003] calling phy_init+0x0/0x29 @ 1
[ 0.501059] initcall phy_init+0x0/0x29 returned 0 after 0 usecs
[ 0.507003] calling init_scsi+0x0/0x89 @ 1
[ 0.512061] SCSI subsystem initialized
[ 0.516004] initcall init_scsi+0x0/0x89 returned 0 after 4882 usecs
[ 0.522003] calling ata_init+0x0/0x2b5 @ 1
[ 0.526024] libata version 3.00 loaded.
[ 0.530003] initcall ata_init+0x0/0x2b5 returned 0 after 3906 usecs
[ 0.536003] calling usb_init+0x0/0xf6 @ 1
[ 0.540122] usbcore: registered new interface driver usbfs
[ 0.546059] usbcore: registered new interface driver hub
[ 0.551057] usbcore: registered new device driver usb
[ 0.556004] initcall usb_init+0x0/0xf6 returned 0 after 15625 usecs
[ 0.563034] calling serio_init+0x0/0x73 @ 1
[ 0.567064] initcall serio_init+0x0/0x73 returned 0 after 0 usecs
[ 0.573004] calling gameport_init+0x0/0x73 @ 1
[ 0.578047] initcall gameport_init+0x0/0x73 returned 0 after 976 usecs
[ 0.584004] calling input_init+0x0/0xe2 @ 1
[ 0.588058] initcall input_init+0x0/0xe2 returned 0 after 0 usecs
[ 0.594003] calling rtc_init+0x0/0x59 @ 1
[ 0.599058] initcall rtc_init+0x0/0x59 returned 0 after 976 usecs
[ 0.605003] calling thermal_init+0x0/0x32 @ 1
[ 0.609057] initcall thermal_init+0x0/0x32 returned 0 after 0 usecs
[ 0.615003] calling leds_init+0x0/0x36 @ 1
[ 0.620014] initcall leds_init+0x0/0x36 returned 0 after 976 usecs
[ 0.626003] calling pci_subsys_init+0x0/0xf3 @ 1
[ 0.630002] PCI: Probing PCI hardware
[ 0.634002] PCI: Probing PCI hardware (bus 00)
[ 0.638093] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.645018] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
[ 0.651008] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[ 0.657004] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[ 0.662010] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.668002] pci 0000:00:01.1: PME# disabled
[ 0.672021] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
[ 0.679017] pci 0000:00:02.0: supports D1 D2
[ 0.683002] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.690002] pci 0000:00:02.0: PME# disabled
[ 0.694020] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 0.701021] pci 0000:00:02.1: supports D1 D2
[ 0.705002] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.712003] pci 0000:00:02.1: PME# disabled
[ 0.716022] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
[ 0.722004] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
[ 0.727004] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
[ 0.734014] pci 0000:00:04.0: supports D1 D2
[ 0.738022] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.744040] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
[ 0.751004] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
[ 0.756016] pci 0000:00:0a.0: supports D1 D2
[ 0.761002] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.767003] pci 0000:00:0a.0: PME# disabled
[ 0.771029] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.778002] pci 0000:00:0b.0: PME# disabled
[ 0.782031] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.789002] pci 0000:00:0c.0: PME# disabled
[ 0.793030] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.799002] pci 0000:00:0d.0: PME# disabled
[ 0.804030] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.810002] pci 0000:00:0e.0: PME# disabled
[ 0.814121] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.820005] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
[ 0.827026] pci 0000:05:07.0: supports D1 D2
[ 0.831002] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[ 0.837003] pci 0000:05:07.0: PME# disabled
[ 0.841022] pci 0000:00:09.0: transparent bridge
[ 0.845003] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[ 0.851003] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
[ 0.858118] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.865005] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
[ 0.870005] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
[ 0.877013] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.883015] pci 0000:01:00.0: supports D1 D2
[ 0.887023] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
[ 0.894029] pci 0000:01:00.1: supports D1 D2
[ 0.898034] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
[ 0.904003] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
[ 0.911004] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.921227] pci 0000:00:00.0: default IRQ router [10de:005e]
[ 0.927072] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3
[ 0.933010] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 0.940026] pci 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 0.946005] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5
[ 0.953129] initcall pci_subsys_init+0x0/0xf3 returned 0 after 315429 usecs
[ 0.960003] calling proto_init+0x0/0xf @ 1
[ 0.964008] initcall proto_init+0x0/0xf returned 0 after 0 usecs
[ 0.971003] calling net_dev_init+0x0/0x12c @ 1
[ 0.975063] initcall net_dev_init+0x0/0x12c returned 0 after 0 usecs
[ 0.982003] calling neigh_init+0x0/0x66 @ 1
[ 0.986004] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs
[ 0.992003] calling fib_rules_init+0x0/0x99 @ 1
[ 0.997004] initcall fib_rules_init+0x0/0x99 returned 0 after 0 usecs
[ 1.003003] calling pktsched_init+0x0/0xa9 @ 1
[ 1.007008] initcall pktsched_init+0x0/0xa9 returned 0 after 0 usecs
[ 1.014003] calling tc_filter_init+0x0/0x43 @ 1
[ 1.018004] initcall tc_filter_init+0x0/0x43 returned 0 after 0 usecs
[ 1.025003] calling genl_init+0x0/0xb0 @ 1
[ 1.032033] initcall genl_init+0x0/0xb0 returned 0 after 2929 usecs
[ 1.038003] calling wanrouter_init+0x0/0x42 @ 1
[ 1.043053] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[ 1.050019] initcall wanrouter_init+0x0/0x42 returned 0 after 6835 usecs
[ 1.057003] calling wireless_nlevent_init+0x0/0x2f @ 1
[ 1.062003] initcall wireless_nlevent_init+0x0/0x2f returned 0 after 0 usecs
[ 1.069003] calling sysctl_init+0x0/0x3b @ 1
[ 1.074004] initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 1.080005] calling pci_iommu_init+0x0/0xc @ 1
[ 1.084004] initcall pci_iommu_init+0x0/0xc returned 0 after 0 usecs
[ 1.091004] calling print_all_ICs+0x0/0x47d @ 1
[ 1.095002]
[ 1.095003] printing PIC contents
[ 1.100004] ... PIC IMR: fffa
[ 1.101000] ... PIC IRR: 0001
[ 1.106002] ... PIC ISR: 0001
[ 1.109003] ... PIC ELCR: 0828
[ 1.112003]
[ 1.112004] printing local APIC contents on CPU#0/0:
[ 1.113000] ... APIC ID: 00000000 (0)
[ 1.113000] ... APIC VERSION: 00040010
[ 1.113000] ... APIC TASKPRI: 00000000 (00)
[ 1.113000] ... APIC ARBPRI: 000000e0 (e0)
[ 1.113000] ... APIC PROCPRI: 00000000
[ 1.113000] ... APIC LDR: 01000000
[ 1.113000] ... APIC DFR: ffffffff
[ 1.113000] ... APIC SPIV: 000001ff
[ 1.113000] ... APIC ISR field:
[ 1.113000] 0123456789abcdef0123456789abcdef
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] ... APIC TMR field:
[ 1.113000] 0123456789abcdef0123456789abcdef
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] ... APIC IRR field:
[ 1.113000] 0123456789abcdef0123456789abcdef
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000010000000000000000
[ 1.113000] ... APIC ESR: 00000000
[ 1.113000] ... APIC ICR: 000008fd
[ 1.113000] ... APIC ICR2: 02000000
[ 1.113000] ... APIC LVTT: 000200ef
[ 1.113000] ... APIC LVTPC: 00010000
[ 1.113000] ... APIC LVT0: 00010700
[ 1.113000] ... APIC LVT1: 00000400
[ 1.113000] ... APIC LVTERR: 000000fe
[ 1.113000] ... APIC TMICT: 00003112
[ 1.113000] ... APIC TMCCT: 00002032
[ 1.113000] ... APIC TDCR: 00000003
[ 1.113000]
[ 1.112109]
[ 1.112110] printing local APIC contents on CPU#1/1:
[ 1.113000] ... APIC ID: 01000000 (1)
[ 1.113000] ... APIC VERSION: 00040010
[ 1.113000] ... APIC TASKPRI: 00000000 (00)
[ 1.113000] ... APIC ARBPRI: 000000e0 (e0)
[ 1.113000] ... APIC PROCPRI: 00000000
[ 1.113000] ... APIC LDR: 02000000
[ 1.113000] ... APIC DFR: ffffffff
[ 1.113000] ... APIC SPIV: 000001ff
[ 1.113000] ... APIC ISR field:
[ 1.113000] 0123456789abcdef0123456789abcdef
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] ... APIC TMR field:
[ 1.113000] 0123456789abcdef0123456789abcdef
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] ... APIC IRR field:
[ 1.113000] 0123456789abcdef0123456789abcdef
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000000000000000000000
[ 1.113000] 00000000000000010000000000000000
[ 1.113000] ... APIC ESR: 00000000
[ 1.113000] ... APIC ICR: 000008fb
[ 1.113000] ... APIC ICR2: 01000000
[ 1.113000] ... APIC LVTT: 000200ef
[ 1.113000] ... APIC LVTPC: 00010000
[ 1.113000] ... APIC LVT0: 00010700
[ 1.113000] ... APIC LVT1: 00010400
[ 1.113000] ... APIC LVTERR: 000000fe
[ 1.113000] ... APIC TMICT: 00003112
[ 1.113000] ... APIC TMCCT: 00000316
[ 1.113000] ... APIC TDCR: 00000003
[ 1.113000]
[ 1.314005] Clocksource tsc unstable (delta = 198850212 ns)
[ 1.319008] number of MP IRQ sources: 17.
[ 1.323002] number of IO-APIC #2 registers: 24.
[ 1.328002] testing the IO APIC.......................
[ 1.333005]
[ 1.334002] IO APIC #2......
[ 1.337002] .... register #00: 00000000
[ 1.341002] ....... : physical APIC id: 00
[ 1.345002] ....... : Delivery Type: 0
[ 1.349002] ....... : LTS : 0
[ 1.353002] .... register #01: 00170011
[ 1.357002] ....... : max redirection entries: 0017
[ 1.362002] ....... : PRQ implemented: 0
[ 1.367002] ....... : IO APIC version: 0011
[ 1.371002] .... register #02: 00000000
[ 1.375002] ....... : arbitration: 00
[ 1.379002] .... IRQ redirection table:
[ 1.383003] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 1.388004] 00 003 0 0 0 0 0 1 1 30
[ 1.394004] 01 003 0 0 0 0 0 1 1 31
[ 1.399004] 02 000 1 0 0 0 0 0 0 00
[ 1.404004] 03 003 1 1 0 1 0 1 1 33
[ 1.409004] 04 003 0 0 0 0 0 1 1 34
[ 1.414004] 05 003 1 1 0 1 0 1 1 35
[ 1.420004] 06 003 0 0 0 0 0 1 1 36
[ 1.425004] 07 003 1 0 0 0 0 1 1 37
[ 1.430004] 08 003 0 0 0 0 0 1 1 38
[ 1.435004] 09 003 0 0 0 0 0 1 1 39
[ 1.440004] 0a 003 0 0 0 0 0 1 1 3A
[ 1.446004] 0b 003 1 1 0 1 0 1 1 3B
[ 1.451004] 0c 003 0 0 0 0 0 1 1 3C
[ 1.456004] 0d 003 0 0 0 0 0 1 1 3D
[ 1.461004] 0e 003 0 0 0 0 0 1 1 3E
[ 1.466004] 0f 003 0 0 0 0 0 1 1 3F
[ 1.472004] 10 000 1 0 0 0 0 0 0 00
[ 1.477004] 11 000 1 0 0 0 0 0 0 00
[ 1.482004] 12 000 1 0 0 0 0 0 0 00
[ 1.487004] 13 000 1 0 0 0 0 0 0 00
[ 1.492004] 14 000 1 0 0 0 0 0 0 00
[ 1.498004] 15 000 1 0 0 0 0 0 0 00
[ 1.503004] 16 000 1 0 0 0 0 0 0 00
[ 1.508004] 17 000 1 0 0 0 0 0 0 00
[ 1.513003] IRQ to pin mappings:
[ 1.516002] IRQ0 -> 0:0
[ 1.519174] IRQ1 -> 0:1
[ 1.521002] IRQ3 -> 0:3
[ 1.524174] IRQ4 -> 0:4
[ 1.527002] IRQ5 -> 0:5
[ 1.528693] IRQ6 -> 0:6
[ 1.531174] IRQ7 -> 0:7
[ 1.533693] IRQ8 -> 0:8
[ 1.536002] IRQ9 -> 0:9
[ 1.539174] IRQ10 -> 0:10
[ 1.541002] IRQ11 -> 0:11
[ 1.544173] IRQ12 -> 0:12
[ 1.546174] IRQ13 -> 0:13
[ 1.548780] IRQ14 -> 0:14
[ 1.552174] IRQ15 -> 0:15
[ 1.554176] .................................... done.
[ 1.560004] initcall print_all_ICs+0x0/0x47d returned 0 after 454101 usecs
[ 1.566004] calling hpet_late_init+0x0/0xd7 @ 1
[ 1.571004] initcall hpet_late_init+0x0/0xd7 returned -19 after 0 usecs
[ 1.578004] calling init_kmmio+0x0/0x23 @ 1
[ 1.582004] initcall init_kmmio+0x0/0x23 returned 0 after 0 usecs
[ 1.588004] calling clocksource_done_booting+0x0/0x11 @ 1
[ 1.593004] initcall clocksource_done_booting+0x0/0x11 returned 0 after 0 usecs
[ 1.601004] calling ftrace_init_debugfs+0x0/0xe7 @ 1
[ 1.606026] initcall ftrace_init_debugfs+0x0/0xe7 returned 0 after 0 usecs
[ 1.612004] calling rb_init_debugfs+0x0/0x38 @ 1
[ 1.617007] initcall rb_init_debugfs+0x0/0x38 returned 0 after 0 usecs
[ 1.624004] calling tracer_init_debugfs+0x0/0x370 @ 1
[ 1.629140] initcall tracer_init_debugfs+0x0/0x370 returned 0 after 0 usecs
[ 1.636004] calling init_trace_printk_function_export+0x0/0x39 @ 1
[ 1.642008] initcall init_trace_printk_function_export+0x0/0x39 returned 0 after 0 usecs
[ 1.650004] calling stat_workqueue_init+0x0/0x27 @ 1
[ 1.655011] initcall stat_workqueue_init+0x0/0x27 returned 0 after 0 usecs
[ 1.662004] calling init_pipe_fs+0x0/0x3d @ 1
[ 1.666023] initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
[ 1.673004] calling init_mnt_writers+0x0/0x45 @ 1
[ 1.677004] initcall init_mnt_writers+0x0/0x45 returned 0 after 0 usecs
[ 1.684003] calling eventpoll_init+0x0/0x87 @ 1
[ 1.689015] initcall eventpoll_init+0x0/0x87 returned 0 after 0 usecs
[ 1.695004] calling anon_inode_init+0x0/0xe3 @ 1
[ 1.700017] initcall anon_inode_init+0x0/0xe3 returned 0 after 0 usecs
[ 1.706006] calling pnp_system_init+0x0/0xf @ 1
[ 1.711062] initcall pnp_system_init+0x0/0xf returned 0 after 0 usecs
[ 1.717004] calling chr_dev_init+0x0/0x89 @ 1
[ 1.723103] initcall chr_dev_init+0x0/0x89 returned 0 after 976 usecs
[ 1.729015] calling firmware_class_init+0x0/0x61 @ 1
[ 1.734060] initcall firmware_class_init+0x0/0x61 returned 0 after 0 usecs
[ 1.741004] calling cpufreq_gov_performance_init+0x0/0xf @ 1
[ 1.747005] initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs
[ 1.754004] calling cpufreq_gov_powersave_init+0x0/0xf @ 1
[ 1.760005] initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs
[ 1.767004] calling pcibios_assign_resources+0x0/0x91 @ 1
[ 1.773054] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[ 1.779004] pci 0000:00:09.0: IO window: 0xc000-0xcfff
[ 1.784005] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff
[ 1.790003] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.795005] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 1.801003] pci 0000:00:0b.0: IO window: disabled
[ 1.806004] pci 0000:00:0b.0: MEM window: disabled
[ 1.811003] pci 0000:00:0b.0: PREFETCH window: disabled
[ 1.816004] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 1.822003] pci 0000:00:0c.0: IO window: disabled
[ 1.827004] pci 0000:00:0c.0: MEM window: disabled
[ 1.832003] pci 0000:00:0c.0: PREFETCH window: disabled
[ 1.838005] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[ 1.843003] pci 0000:00:0d.0: IO window: disabled
[ 1.848004] pci 0000:00:0d.0: MEM window: disabled
[ 1.853003] pci 0000:00:0d.0: PREFETCH window: disabled
[ 1.859009] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[ 1.864003] pci 0000:00:0e.0: IO window: 0xb000-0xbfff
[ 1.870004] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff
[ 1.876004] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 1.883008] pci 0000:00:09.0: setting latency timer to 64
[ 1.889006] pci 0000:00:0b.0: setting latency timer to 64
[ 1.894006] pci 0000:00:0c.0: setting latency timer to 64
[ 1.900006] pci 0000:00:0d.0: setting latency timer to 64
[ 1.905006] pci 0000:00:0e.0: setting latency timer to 64
[ 1.910004] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.916004] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.923004] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 1.928004] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff]
[ 1.935003] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 1.940003] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 1.945004] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.952004] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 1.957003] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[ 1.962005] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 1.967003] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 1.972003] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 1.978003] pci_bus 0000:03: resource 1 mem: [0x0-0x0]
[ 1.983003] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 1.988003] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 1.993003] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
[ 1.998003] pci_bus 0000:02: resource 1 mem: [0x0-0x0]
[ 2.003003] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 2.008003] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 2.013004] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 2.019004] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff]
[ 2.025004] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xd7ffffff]
[ 2.032003] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 2.037005] initcall pcibios_assign_resources+0x0/0x91 returned 0 after 257812 usecs
[ 2.044004] calling sysctl_core_init+0x0/0x2d @ 1
[ 2.049013] initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs
[ 2.056004] calling inet_init+0x0/0x199 @ 1
[ 2.060025] NET: Registered protocol family 2
[ 2.076081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.083417] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.091526] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.098356] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.105004] TCP reno registered
[ 2.111109] initcall inet_init+0x0/0x199 returned 0 after 49804 usecs
[ 2.118006] calling af_unix_init+0x0/0x47 @ 1
[ 2.122012] NET: Registered protocol family 1
[ 2.126016] initcall af_unix_init+0x0/0x47 returned 0 after 3906 usecs
[ 2.133005] calling populate_rootfs+0x0/0x11b @ 1
[ 2.138367] initcall populate_rootfs+0x0/0x11b returned 0 after 0 usecs
[ 2.145005] calling vmx_init+0x0/0x222 @ 1
[ 2.149127] kvm: no hardware support
[ 2.152006] initcall vmx_init+0x0/0x222 returned -95 after 2929 usecs
[ 2.159004] initcall vmx_init+0x0/0x222 returned with error code -95
[ 2.165004] calling svm_init+0x0/0x16 @ 1
[ 2.169116] has_svn: not amd
[ 2.172003] kvm: no hardware support
[ 2.176004] initcall svm_init+0x0/0x16 returned -95 after 6835 usecs
[ 2.182004] initcall svm_init+0x0/0x16 returned with error code -95
[ 2.188005] calling i8259A_init_sysfs+0x0/0x1d @ 1
[ 2.193064] initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 usecs
[ 2.200004] calling sbf_init+0x0/0xda @ 1
[ 2.204007] initcall sbf_init+0x0/0xda returned 0 after 0 usecs
[ 2.210005] calling i8237A_init_sysfs+0x0/0x1d @ 1
[ 2.215061] initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 usecs
[ 2.222008] calling add_rtc_cmos+0x0/0x92 @ 1
[ 2.226058] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.234006] initcall add_rtc_cmos+0x0/0x92 returned 0 after 7812 usecs
[ 2.240004] calling cache_sysfs_init+0x0/0x290 @ 1
[ 2.245004] initcall cache_sysfs_init+0x0/0x290 returned 0 after 0 usecs
[ 2.252005] calling thermal_throttle_init_device+0x0/0x67 @ 1
[ 2.258005] initcall thermal_throttle_init_device+0x0/0x67 returned 0 after 0 usecs
[ 2.265005] calling init_nonfatal_mce_checker+0x0/0x50 @ 1
[ 2.271004] Machine check exception polling timer started.
[ 2.276005] initcall init_nonfatal_mce_checker+0x0/0x50 returned 0 after 4882 usecs
[ 2.284005] calling eps_init+0x0/0x3e @ 1
[ 2.288007] initcall eps_init+0x0/0x3e returned -19 after 0 usecs
[ 2.294005] calling cpufreq_gx_init+0x0/0x145 @ 1
[ 2.299005] initcall cpufreq_gx_init+0x0/0x145 returned -19 after 0 usecs
[ 2.306005] calling speedstep_init+0x0/0x17b @ 1
[ 2.310005] initcall speedstep_init+0x0/0x17b returned -19 after 0 usecs
[ 2.317005] calling speedstep_init+0x0/0xaf @ 1
[ 2.321005] initcall speedstep_init+0x0/0xaf returned -19 after 0 usecs
[ 2.328005] calling ioapic_init_sysfs+0x0/0x84 @ 1
[ 2.333060] initcall ioapic_init_sysfs+0x0/0x84 returned 0 after 0 usecs
[ 2.340004] calling add_pcspkr+0x0/0x24 @ 1
[ 2.344056] initcall add_pcspkr+0x0/0x24 returned 0 after 0 usecs
[ 2.350005] calling microcode_init+0x0/0xdd @ 1
[ 2.355003] microcode: no support for this CPU vendor
[ 2.360004] initcall microcode_init+0x0/0xdd returned -19 after 4882 usecs
[ 2.367004] calling init+0x0/0xf @ 1
[ 2.370023] initcall init+0x0/0xf returned 0 after 0 usecs
[ 2.376005] calling proc_execdomains_init+0x0/0x1c @ 1
[ 2.381010] initcall proc_execdomains_init+0x0/0x1c returned 0 after 0 usecs
[ 2.388004] calling ioresources_init+0x0/0x31 @ 1
[ 2.393012] initcall ioresources_init+0x0/0x31 returned 0 after 0 usecs
[ 2.399004] calling uid_cache_init+0x0/0x7a @ 1
[ 2.404011] initcall uid_cache_init+0x0/0x7a returned 0 after 0 usecs
[ 2.410005] calling init_posix_timers+0x0/0xa9 @ 1
[ 2.415010] initcall init_posix_timers+0x0/0xa9 returned 0 after 0 usecs
[ 2.422005] calling init_posix_cpu_timers+0x0/0x8d @ 1
[ 2.427005] initcall init_posix_cpu_timers+0x0/0x8d returned 0 after 0 usecs
[ 2.434005] calling nsproxy_cache_init+0x0/0x27 @ 1
[ 2.439009] initcall nsproxy_cache_init+0x0/0x27 returned 0 after 0 usecs
[ 2.446005] calling create_proc_profile+0x0/0x210 @ 1
[ 2.451004] initcall create_proc_profile+0x0/0x210 returned 0 after 0 usecs
[ 2.458005] calling timekeeping_init_device+0x0/0x1d @ 1
[ 2.463060] initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 usecs
[ 2.471005] calling init_clocksource_sysfs+0x0/0x43 @ 1
[ 2.477058] initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 976 usecs
[ 2.484007] calling init_timer_list_procfs+0x0/0x27 @ 1
[ 2.489009] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 0 usecs
[ 2.496005] calling futex_init+0x0/0x81 @ 1
[ 2.500010] initcall futex_init+0x0/0x81 returned 0 after 0 usecs
[ 2.507005] calling proc_dma_init+0x0/0x1c @ 1
[ 2.511014] initcall proc_dma_init+0x0/0x1c returned 0 after 0 usecs
[ 2.517005] calling proc_modules_init+0x0/0x1c @ 1
[ 2.522008] initcall proc_modules_init+0x0/0x1c returned 0 after 0 usecs
[ 2.529005] calling kallsyms_init+0x0/0x1f @ 1
[ 2.533009] initcall kallsyms_init+0x0/0x1f returned 0 after 0 usecs
[ 2.540005] calling crash_save_vmcoreinfo_init+0x0/0x318 @ 1
[ 2.545028] initcall crash_save_vmcoreinfo_init+0x0/0x318 returned 0 after 0 usecs
[ 2.553005] calling crash_notes_memory_init+0x0/0x31 @ 1
[ 2.558006] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 0 usecs
[ 2.566005] calling init_kprobes+0x0/0x112 @ 1
[ 2.573822] initcall init_kprobes+0x0/0x112 returned 0 after 3906 usecs
[ 2.581005] calling utsname_sysctl_init+0x0/0x11 @ 1
[ 2.586020] initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 usecs
[ 2.592005] calling init_markers+0x0/0x20 @ 1
[ 2.597005] initcall init_markers+0x0/0x20 returned 0 after 0 usecs
[ 2.603005] calling init_tracepoints+0x0/0x20 @ 1
[ 2.608005] initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs
[ 2.614005] calling ftrace_mod_cmd_init+0x0/0xf @ 1
[ 2.619005] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[ 2.626005] calling init_events+0x0/0x5f @ 1
[ 2.630007] initcall init_events+0x0/0x5f returned 0 after 0 usecs
[ 2.637005] calling init_sched_switch_trace+0x0/0xf @ 1
[ 2.642005] Testing tracer sched_switch: .. no entries found ..FAILED!
[ 2.750005] initcall init_sched_switch_trace+0x0/0xf returned -1 after 105468 usecs
[ 2.757006] initcall init_sched_switch_trace+0x0/0xf returned with error code -1
[ 2.765005] calling init_function_trace+0x0/0x35 @ 1
[ 2.770004] Testing tracer function: PASSED
[ 2.882716] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[ 3.117011] initcall init_function_trace+0x0/0x35 returned -1 after 338867 usecs
[ 3.125006] initcall init_function_trace+0x0/0x35 returned with error code -1
[ 3.132006] calling init_irqsoff_tracer+0x0/0x11 @ 1
[ 3.137005] Testing tracer irqsoff: <4>------------[ cut here ]------------
[ 3.141002] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xaf/0x140()
[ 3.141002] Hardware name: System Product Name
[ 3.141002] Modules linked in:
[ 3.141002] Pid: 1, comm: swapper Not tainted 2.6.29-rc8-tip-02702-ge0d2c41-dirty #20985
[ 3.141002] Call Trace:
[ 3.141002] [<c10488c6>] warn_slowpath+0x76/0xb0
[ 3.141002] [<c147dda1>] ? _spin_lock_irq+0x11/0x30
[ 3.141002] [<c1050304>] ? run_timer_softirq+0x174/0x180
[ 3.141002] [<c104d01b>] ? _local_bh_enable+0x8b/0xa0
[ 3.141002] [<c104d1a2>] ? __do_softirq+0x172/0x180
[ 3.141002] [<c1074444>] ? ring_buffer_reset_cpu+0x24/0xe0
[ 3.141002] [<c10744ed>] ? ring_buffer_reset_cpu+0xcd/0xe0
[ 3.141002] [<c147dcb9>] ? _spin_unlock_irqrestore+0x19/0x30
[ 3.141002] [<c107c721>] ? trace_hardirqs_off+0x21/0x30
[ 3.141002] [<c147dcb9>] ? _spin_unlock_irqrestore+0x19/0x30
[ 3.141002] [<c10744ed>] ? ring_buffer_reset_cpu+0xcd/0xe0
[ 3.141002] [<c107990f>] update_max_tr_single+0xaf/0x140
[ 3.141002] [<c107c8bc>] stop_critical_timing+0x15c/0x210
[ 3.141002] [<c1079f8d>] ? register_tracer+0x10d/0x200
[ 3.141002] [<c107c9b1>] trace_hardirqs_on+0x21/0x30
[ 3.141002] [<c107a263>] trace_selftest_startup_irqsoff+0x53/0xb0
[ 3.141002] [<c16fb8a2>] ? init_irqsoff_tracer+0x0/0x11
[ 3.141002] [<c1079f8d>] register_tracer+0x10d/0x200
[ 3.141002] [<c16fb8a2>] ? init_irqsoff_tracer+0x0/0x11
[ 3.141002] [<c16fb8af>] init_irqsoff_tracer+0xd/0x11
[ 3.141002] [<c100107a>] do_one_initcall+0x6a/0x170
[ 3.141002] [<c1090d63>] ? zone_statistics+0x63/0x70
[ 3.141002] [<c10886a6>] ? __alloc_pages_internal+0xa6/0x390
[ 3.141002] [<c11a58aa>] ? put_dec+0x2a/0x100
[ 3.141002] [<c10a1a14>] ? check_valid_pointer+0x24/0x60
[ 3.141002] [<c10a2041>] ? check_object+0x131/0x170
[ 3.141002] [<c10a28a4>] ? __slab_free+0x274/0x2a0
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c10a428f>] ? kmem_cache_free+0x8f/0xa0
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c11a1557>] ? ida_get_new_above+0x157/0x180
[ 3.141002] [<c11a197f>] ? idr_pre_get+0x4f/0x60
[ 3.141002] [<c10e0d43>] ? proc_register+0x103/0x150
[ 3.141002] [<c10e0ec0>] ? create_proc_entry+0x80/0xa0
[ 3.141002] [<c106e278>] ? init_irq_proc+0x58/0x70
[ 3.141002] [<c16e95db>] kernel_init+0x104/0x155
[ 3.141002] [<c16e94d7>] ? kernel_init+0x0/0x155
[ 3.141002] [<c101f8e3>] kernel_thread_helper+0x7/0x10
[ 3.141002] ---[ end trace 5a5d197966b56a2e ]---
[ 3.376012] .. no entries found ..FAILED!
[ 3.380006] initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 237304 usecs
[ 3.388006] calling init_wakeup_tracer+0x0/0x1d @ 1
[ 3.393004] Testing tracer wakeup: PASSED
[ 3.699616] Testing tracer wakeup_rt: PASSED
[ 4.006613] initcall init_wakeup_tracer+0x0/0x1d returned 0 after 598633 usecs
[ 4.013006] calling stack_trace_init+0x0/0x7a @ 1
[ 4.018022] initcall stack_trace_init+0x0/0x7a returned 0 after 0 usecs
[ 4.025006] calling init_mmio_trace+0x0/0xf @ 1
[ 4.029007] initcall init_mmio_trace+0x0/0xf returned 0 after 0 usecs
[ 4.036006] calling init_bts_trace+0x0/0xf @ 1
[ 4.040007] initcall init_bts_trace+0x0/0xf returned 0 after 0 usecs
[ 4.047006] calling init_power_trace+0x0/0x10 @ 1
[ 4.051006] initcall init_power_trace+0x0/0x10 returned 0 after 0 usecs
[ 4.058006] calling init_kmem_tracer+0x0/0xf @ 1
[ 4.063007] initcall init_kmem_tracer+0x0/0xf returned 0 after 0 usecs
[ 4.069006] calling register_ftrace_syscalls+0x0/0x9d @ 1
[ 4.075008] initcall register_ftrace_syscalls+0x0/0x9d returned 0 after 0 usecs
[ 4.082006] calling perf_counter_sysfs_init+0x0/0x14 @ 1
[ 4.087051] initcall perf_counter_sysfs_init+0x0/0x14 returned 0 after 0 usecs
[ 4.094006] calling init_per_zone_pages_min+0x0/0x77 @ 1
[ 4.100041] initcall init_per_zone_pages_min+0x0/0x77 returned 0 after 0 usecs
[ 4.107005] calling pdflush_init+0x0/0x11 @ 1
[ 4.111025] initcall pdflush_init+0x0/0x11 returned 0 after 0 usecs
[ 4.118006] calling kswapd_init+0x0/0x48 @ 1
[ 4.122024] initcall kswapd_init+0x0/0x48 returned 0 after 0 usecs
[ 4.128006] calling init_tmpfs+0x0/0xb9 @ 1
[ 4.132058] initcall init_tmpfs+0x0/0xb9 returned 0 after 0 usecs
[ 4.138006] calling setup_vmstat+0x0/0xa8 @ 1
[ 4.143029] initcall setup_vmstat+0x0/0xa8 returned 0 after 0 usecs
[ 4.149005] calling mm_sysfs_init+0x0/0x22 @ 1
[ 4.154013] initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs
[ 4.160006] calling proc_vmalloc_init+0x0/0x1f @ 1
[ 4.165010] initcall proc_vmalloc_init+0x0/0x1f returned 0 after 0 usecs
[ 4.171006] calling init_emergency_pool+0x0/0x58 @ 1
[ 4.176034] highmem bounce pool size: 64 pages
[ 4.181006] initcall init_emergency_pool+0x0/0x58 returned 0 after 4882 usecs
[ 4.188006] calling slab_proc_init+0x0/0x1f @ 1
[ 4.193010] initcall slab_proc_init+0x0/0x1f returned 0 after 0 usecs
[ 4.199006] calling slab_sysfs_init+0x0/0xb6 @ 1
[ 4.218117] initcall slab_sysfs_init+0x0/0xb6 returned 0 after 13671 usecs
[ 4.225006] calling fasync_init+0x0/0x24 @ 1
[ 4.229205] initcall fasync_init+0x0/0x24 returned 0 after 976 usecs
[ 4.236006] calling proc_filesystems_init+0x0/0x1c @ 1
[ 4.241025] initcall proc_filesystems_init+0x0/0x1c returned 0 after 0 usecs
[ 4.248006] calling dnotify_init+0x0/0x24 @ 1
[ 4.253065] initcall dnotify_init+0x0/0x24 returned 0 after 976 usecs
[ 4.259006] calling inotify_setup+0x0/0x11 @ 1
[ 4.263033] initcall inotify_setup+0x0/0x11 returned 0 after 0 usecs
[ 4.270005] calling inotify_user_setup+0x0/0x98 @ 1
[ 4.275126] initcall inotify_user_setup+0x0/0x98 returned 0 after 0 usecs
[ 4.282006] calling aio_setup+0x0/0x9b @ 1
[ 4.286144] initcall aio_setup+0x0/0x9b returned 0 after 0 usecs
[ 4.292014] calling proc_locks_init+0x0/0x1c @ 1
[ 4.297011] initcall proc_locks_init+0x0/0x1c returned 0 after 0 usecs
[ 4.303006] calling init_mbcache+0x0/0x11 @ 1
[ 4.308006] initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
[ 4.314006] calling dquot_init+0x0/0xc8 @ 1
[ 4.318004] VFS: Disk quotas dquot_6.5.2
[ 4.322132] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.329007] initcall dquot_init+0x0/0xc8 returned 0 after 10742 usecs
[ 4.335006] calling init_v1_quota_format+0x0/0xf @ 1
[ 4.340006] initcall init_v1_quota_format+0x0/0xf returned 0 after 0 usecs
[ 4.347006] calling init_v2_quota_format+0x0/0xf @ 1
[ 4.352006] initcall init_v2_quota_format+0x0/0xf returned 0 after 0 usecs
[ 4.359006] calling proc_cmdline_init+0x0/0x1c @ 1
[ 4.364011] initcall proc_cmdline_init+0x0/0x1c returned 0 after 0 usecs
[ 4.371006] calling proc_cpuinfo_init+0x0/0x1c @ 1
[ 4.375010] initcall proc_cpuinfo_init+0x0/0x1c returned 0 after 0 usecs
[ 4.382006] calling proc_devices_init+0x0/0x1c @ 1
[ 4.387010] initcall proc_devices_init+0x0/0x1c returned 0 after 0 usecs
[ 4.394006] calling proc_interrupts_init+0x0/0x1c @ 1
[ 4.399010] initcall proc_interrupts_init+0x0/0x1c returned 0 after 0 usecs
[ 4.406006] calling proc_loadavg_init+0x0/0x1c @ 1
[ 4.411010] initcall proc_loadavg_init+0x0/0x1c returned 0 after 0 usecs
[ 4.417006] calling proc_meminfo_init+0x0/0x1c @ 1
[ 4.422010] initcall proc_meminfo_init+0x0/0x1c returned 0 after 0 usecs
[ 4.429006] calling proc_stat_init+0x0/0x1c @ 1
[ 4.433010] initcall proc_stat_init+0x0/0x1c returned 0 after 0 usecs
[ 4.440006] calling proc_uptime_init+0x0/0x27 @ 1
[ 4.444010] initcall proc_uptime_init+0x0/0x27 returned 0 after 976 usecs
[ 4.452006] calling proc_version_init+0x0/0x1c @ 1
[ 4.457010] initcall proc_version_init+0x0/0x1c returned 0 after 0 usecs
[ 4.463006] calling proc_kmsg_init+0x0/0x1f @ 1
[ 4.468010] initcall proc_kmsg_init+0x0/0x1f returned 0 after 0 usecs
[ 4.474006] calling proc_page_init+0x0/0x37 @ 1
[ 4.479019] initcall proc_page_init+0x0/0x37 returned 0 after 0 usecs
[ 4.485006] calling init_devpts_fs+0x0/0x32 @ 1
[ 4.490025] initcall init_devpts_fs+0x0/0x32 returned 0 after 0 usecs
[ 4.496006] calling init_reiserfs_fs+0x0/0x87 @ 1
[ 4.501062] initcall init_reiserfs_fs+0x0/0x87 returned 0 after 0 usecs
[ 4.508006] calling init_ext3_fs+0x0/0x64 @ 1
[ 4.513061] initcall init_ext3_fs+0x0/0x64 returned 0 after 976 usecs
[ 4.519008] calling journal_init+0x0/0x85 @ 1
[ 4.524169] initcall journal_init+0x0/0x85 returned 0 after 976 usecs
[ 4.530007] calling init_squashfs_fs+0x0/0x5d @ 1
[ 4.535088] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.541007] initcall init_squashfs_fs+0x0/0x5d returned 0 after 5859 usecs
[ 4.548051] calling init_ramfs_fs+0x0/0xf @ 1
[ 4.552007] initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
[ 4.559006] calling init_fat_fs+0x0/0x46 @ 1
[ 4.563105] initcall init_fat_fs+0x0/0x46 returned 0 after 0 usecs
[ 4.569006] calling init_vfat_fs+0x0/0xf @ 1
[ 4.574007] initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs
[ 4.580006] calling init_msdos_fs+0x0/0xf @ 1
[ 4.584007] initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs
[ 4.591006] calling init_bfs_fs+0x0/0x54 @ 1
[ 4.595106] initcall init_bfs_fs+0x0/0x54 returned 0 after 0 usecs
[ 4.601006] calling init_iso9660_fs+0x0/0x64 @ 1
[ 4.606128] initcall init_iso9660_fs+0x0/0x64 returned 0 after 0 usecs
[ 4.612006] calling init_hfsplus_fs+0x0/0x50 @ 1
[ 4.617109] initcall init_hfsplus_fs+0x0/0x50 returned 0 after 0 usecs
[ 4.624011] calling init_hfs_fs+0x0/0x50 @ 1
[ 4.628111] initcall init_hfs_fs+0x0/0x50 returned 0 after 0 usecs
[ 4.634006] calling vxfs_init+0x0/0x4d @ 1
[ 4.639061] initcall vxfs_init+0x0/0x4d returned 0 after 976 usecs
[ 4.645006] calling init_nls_cp852+0x0/0xf @ 1
[ 4.649022] initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs
[ 4.656006] calling init_nls_cp860+0x0/0xf @ 1
[ 4.660006] initcall init_nls_cp860+0x0/0xf returned 0 after 0 usecs
[ 4.666006] calling init_nls_cp862+0x0/0xf @ 1
[ 4.671006] initcall init_nls_cp862+0x0/0xf returned 0 after 0 usecs
[ 4.677006] calling init_nls_cp866+0x0/0xf @ 1
[ 4.682006] initcall init_nls_cp866+0x0/0xf returned 0 after 0 usecs
[ 4.688006] calling init_nls_cp874+0x0/0xf @ 1
[ 4.693006] initcall init_nls_cp874+0x0/0xf returned 0 after 0 usecs
[ 4.699006] calling init_nls_cp932+0x0/0xf @ 1
[ 4.703006] initcall init_nls_cp932+0x0/0xf returned 0 after 0 usecs
[ 4.710006] calling init_nls_euc_jp+0x0/0x39 @ 1
[ 4.714007] initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 usecs
[ 4.721006] calling init_nls_cp1250+0x0/0xf @ 1
[ 4.726006] initcall init_nls_cp1250+0x0/0xf returned 0 after 0 usecs
[ 4.732006] calling init_nls_ascii+0x0/0xf @ 1
[ 4.736006] initcall init_nls_ascii+0x0/0xf returned 0 after 0 usecs
[ 4.743006] calling init_nls_iso8859_7+0x0/0xf @ 1
[ 4.748006] initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs
[ 4.754006] calling init_nls_iso8859_15+0x0/0xf @ 1
[ 4.759007] initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs
[ 4.766006] calling init_nls_koi8_u+0x0/0xf @ 1
[ 4.771006] initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 usecs
[ 4.777008] calling init_nls_koi8_ru+0x0/0x39 @ 1
[ 4.782007] initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 usecs
[ 4.788006] calling init_nls_utf8+0x0/0x1f @ 1
[ 4.793007] initcall init_nls_utf8+0x0/0x1f returned 0 after 0 usecs
[ 4.799006] calling init_ncp_fs+0x0/0x54 @ 1
[ 4.804117] initcall init_ncp_fs+0x0/0x54 returned 0 after 0 usecs
[ 4.810007] calling init_ntfs_fs+0x0/0x199 @ 1
[ 4.814005] NTFS driver 2.1.29 [Flags: R/O].
[ 4.819125] initcall init_ntfs_fs+0x0/0x199 returned 0 after 4882 usecs
[ 4.826012] calling init_efs_fs+0x0/0x5f @ 1
[ 4.830005] EFS: 1.0a - http://aeschi.ch.eu.org/efs/
[ 4.835113] initcall init_efs_fs+0x0/0x5f returned 0 after 4882 usecs
[ 4.842007] calling init_romfs_fs+0x0/0x54 @ 1
[ 4.846109] initcall init_romfs_fs+0x0/0x54 returned 0 after 0 usecs
[ 4.853007] calling init_befs_fs+0x0/0x6d @ 1
[ 4.857006] BeFS version: 0.9.3
[ 4.860108] initcall init_befs_fs+0x0/0x6d returned 0 after 2929 usecs
[ 4.867007] calling ipc_init+0x0/0x20 @ 1
[ 4.871013] msgmni has been set to 1739
[ 4.875017] initcall ipc_init+0x0/0x20 returned 0 after 3906 usecs
[ 4.881007] calling ipc_sysctl_init+0x0/0x11 @ 1
[ 4.886031] initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 usecs
[ 4.892006] calling key_proc_init+0x0/0x2c @ 1
[ 4.897011] initcall key_proc_init+0x0/0x2c returned 0 after 0 usecs
[ 4.903007] calling crypto_algapi_init+0x0/0xc @ 1
[ 4.908016] initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs
[ 4.914007] calling chainiv_module_init+0x0/0xf @ 1
[ 4.919008] initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs
[ 4.926007] calling eseqiv_module_init+0x0/0xf @ 1
[ 4.931007] initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
[ 4.938007] calling seqiv_module_init+0x0/0xf @ 1
[ 4.942007] initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs
[ 4.949007] calling hmac_module_init+0x0/0xf @ 1
[ 4.954007] initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
[ 4.960007] calling crypto_xcbc_module_init+0x0/0xf @ 1
[ 4.965007] initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 usecs
[ 4.973007] calling crypto_null_mod_init+0x0/0x69 @ 1
[ 4.978025] alg: No test for cipher_null (cipher_null-generic)
[ 4.979049] alg: No test for digest_null (digest_null-generic)
[ 4.984026] alg: No test for compress_null (compress_null-generic)
[ 4.985022] initcall crypto_null_mod_init+0x0/0x69 returned 0 after 6835 usecs
[ 4.992013] calling md5_mod_init+0x0/0xf @ 1
[ 4.996026] initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs
[ 5.002007] calling sha1_generic_mod_init+0x0/0xf @ 1
[ 5.007025] initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs
[ 5.014009] calling crypto_ecb_module_init+0x0/0xf @ 1
[ 5.019010] initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.026007] calling crypto_cbc_module_init+0x0/0xf @ 1
[ 5.032007] initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.039008] calling crypto_pcbc_module_init+0x0/0xf @ 1
[ 5.044007] initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.051007] calling crypto_module_init+0x0/0xf @ 1
[ 5.056007] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.063007] calling crypto_module_init+0x0/0xf @ 1
[ 5.067007] initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.074007] calling crypto_ctr_module_init+0x0/0x35 @ 1
[ 5.079007] initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs
[ 5.087007] calling crypto_ccm_module_init+0x0/0x4f @ 1
[ 5.092008] initcall crypto_ccm_module_init+0x0/0x4f returned 0 after 0 usecs
[ 5.099007] calling des_generic_mod_init+0x0/0x33 @ 1
[ 5.104037] initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
[ 5.111007] calling blowfish_mod_init+0x0/0xf @ 1
[ 5.116645] initcall blowfish_mod_init+0x0/0xf returned 0 after 976 usecs
[ 5.123009] calling twofish_mod_init+0x0/0xf @ 1
[ 5.128108] initcall twofish_mod_init+0x0/0xf returned 0 after 0 usecs
[ 5.134007] calling aes_init+0x0/0xf @ 1
[ 5.138042] initcall aes_init+0x0/0xf returned 0 after 0 usecs
[ 5.144010] calling arc4_init+0x0/0xf @ 1
[ 5.148049] initcall arc4_init+0x0/0xf returned 0 after 0 usecs
[ 5.154007] calling deflate_mod_init+0x0/0xf @ 1
[ 5.159365] initcall deflate_mod_init+0x0/0xf returned 0 after 0 usecs
[ 5.166007] calling crc32c_mod_init+0x0/0xf @ 1
[ 5.170045] initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs
[ 5.177007] calling crypto_authenc_module_init+0x0/0xf @ 1
[ 5.182007] initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs
[ 5.190007] calling lzo_mod_init+0x0/0xf @ 1
[ 5.194031] initcall lzo_mod_init+0x0/0xf returned 0 after 0 usecs
[ 5.200007] calling krng_mod_init+0x0/0xf @ 1
[ 5.205025] alg: No test for stdrng (krng)
[ 5.206015] initcall krng_mod_init+0x0/0xf returned 0 after 976 usecs
[ 5.212007] calling proc_genhd_init+0x0/0x31 @ 1
[ 5.217016] initcall proc_genhd_init+0x0/0x31 returned 0 after 0 usecs
[ 5.223007] calling bsg_init+0x0/0x106 @ 1
[ 5.228069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 5.235008] initcall bsg_init+0x0/0x106 returned 0 after 7812 usecs
[ 5.241007] calling noop_init+0x0/0x11 @ 1
[ 5.245006] io scheduler noop registered
[ 5.249007] initcall noop_init+0x0/0x11 returned 0 after 3906 usecs
[ 5.256006] calling as_init+0x0/0x11 @ 1
[ 5.260005] io scheduler anticipatory registered (default)
[ 5.265007] initcall as_init+0x0/0x11 returned 0 after 4882 usecs
[ 5.271007] calling deadline_init+0x0/0x11 @ 1
[ 5.276005] io scheduler deadline registered
[ 5.280007] initcall deadline_init+0x0/0x11 returned 0 after 3906 usecs
[ 5.286007] calling libcrc32c_mod_init+0x0/0x25 @ 1
[ 5.291009] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 0 usecs
[ 5.298009] calling percpu_counter_startup+0x0/0x26 @ 1
[ 5.303007] initcall percpu_counter_startup+0x0/0x26 returned 0 after 0 usecs
[ 5.310007] calling dynamic_printk_init+0x0/0xe2 @ 1
[ 5.316845] initcall dynamic_printk_init+0x0/0xe2 returned 0 after 976 usecs
[ 5.324007] calling pci_init+0x0/0x31 @ 1
[ 5.339090] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.345010] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 5.350011] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.356047] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.361009] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 5.367011] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.372051] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.378009] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 5.383011] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.389056] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.394009] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 5.400011] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 5.405026] pci 0000:01:00.0: Boot video device
[ 5.410013] initcall pci_init+0x0/0x31 returned 0 after 80078 usecs
[ 5.416007] calling pci_proc_init+0x0/0x5b @ 1
[ 5.420159] initcall pci_proc_init+0x0/0x5b returned 0 after 976 usecs
[ 5.427007] calling pcie_portdrv_init+0x0/0x41 @ 1
[ 5.433017] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 5.434038] alloc irq_desc for 24 on cpu 0 node 0
[ 5.435003] alloc kstat_irqs on cpu 0 node 0
[ 5.435009] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 5.436093] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 5.437036] alloc irq_desc for 25 on cpu 0 node 0
[ 5.438004] alloc kstat_irqs on cpu 0 node 0
[ 5.438021] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 5.439089] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 5.440036] alloc irq_desc for 26 on cpu 0 node 0
[ 5.441004] alloc kstat_irqs on cpu 0 node 0
[ 5.441007] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 5.442075] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 5.443035] alloc irq_desc for 27 on cpu 0 node 0
[ 5.444004] alloc kstat_irqs on cpu 0 node 0
[ 5.444015] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 5.445076] initcall pcie_portdrv_init+0x0/0x41 returned 0 after 12695 usecs
[ 5.452029] calling aer_service_init+0x0/0x1d @ 1
[ 5.457070] initcall aer_service_init+0x0/0x1d returned 0 after 0 usecs
[ 5.463007] calling kb3886_init+0x0/0x35 @ 1
[ 5.468041] initcall kb3886_init+0x0/0x35 returned -19 after 0 usecs
[ 5.474007] calling display_class_init+0x0/0x69 @ 1
[ 5.479066] initcall display_class_init+0x0/0x69 returned 0 after 0 usecs
[ 5.486007] calling isapnp_init+0x0/0xc9b @ 1
[ 5.490022] isapnp: Scanning for PnP cards...
[ 5.849533] isapnp: No Plug & Play device found
[ 5.854007] initcall isapnp_init+0x0/0xc9b returned 0 after 355469 usecs
[ 5.861009] calling rand_initialize+0x0/0x30 @ 1
[ 5.866041] initcall rand_initialize+0x0/0x30 returned 0 after 0 usecs
[ 5.872007] calling tty_init+0x0/0xd5 @ 1
[ 5.885141] initcall tty_init+0x0/0xd5 returned 0 after 8789 usecs
[ 5.891170] calling pty_init+0x0/0x4ab @ 1
[ 5.973163] initcall pty_init+0x0/0x4ab returned 0 after 76171 usecs
[ 5.979008] calling sysrq_init+0x0/0x1f @ 1
[ 5.984122] initcall sysrq_init+0x0/0x1f returned 0 after 0 usecs
[ 5.990007] calling cy_init+0x0/0x3c7 @ 1
[ 5.994007] Cyclades driver 2.5 (built Mar 18 2009 10:17:06)
[ 6.012171] initcall cy_init+0x0/0x3c7 returned 0 after 17578 usecs
[ 6.019008] calling specialix_init_module+0x0/0x340 @ 1
[ 6.024134] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
[ 6.030006] sx: derived from work (c) D.Gorodchanin 1994-1996.
[ 6.036006] sx: DTR/RTS pin is always RTS.
[ 6.050233] sx0: specialix IO8+ Board at 0x100 not found.
[ 6.056017] sx1: specialix IO8+ Board at 0x180 not found.
[ 6.061127] sx2: specialix IO8+ Board at 0x250 not found.
[ 6.067018] sx3: specialix IO8+ Board at 0x260 not found.
[ 6.086065] sx: No specialix IO8+ boards detected.
[ 6.090011] initcall specialix_init_module+0x0/0x340 returned -5 after 64453 usecs
[ 6.098033] initcall specialix_init_module+0x0/0x340 returned with error code -5
[ 6.105007] calling ip2_loadmain+0x0/0x1114 @ 1
[ 6.110007] Computone IntelliPort Plus multiport driver version 1.2.14
[ 6.117066] initcall ip2_loadmain+0x0/0x1114 returned 0 after 6835 usecs
[ 6.123008] calling synclink_init+0x0/0x217 @ 1
[ 6.128118] SyncLink serial driver $Revision: 4.38 $
[ 6.155106] SyncLink serial driver $Revision: 4.38 $, tty major#253
[ 6.161010] initcall synclink_init+0x0/0x217 returned 0 after 32226 usecs
[ 6.168125] calling rio_init+0x0/0xb3a @ 1
[ 6.174069] initcall rio_init+0x0/0xb3a returned -5 after 1953 usecs
[ 6.180008] initcall rio_init+0x0/0xb3a returned with error code -5
[ 6.186042] calling init+0x0/0xf @ 1
[ 6.190065] initcall init+0x0/0xf returned 0 after 0 usecs
[ 6.196068] calling dtlk_init+0x0/0x1af @ 1
[ 6.200045] DoubleTalk PC - not found
[ 6.204014] initcall dtlk_init+0x0/0x1af returned -19 after 3906 usecs
[ 6.210007] calling applicom_init+0x0/0x41f @ 1
[ 6.215006] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 6.222010] ac.o: No PCI boards found.
[ 6.225006] ac.o: For an ISA board you must supply memory and irq parameters.
[ 6.233007] initcall applicom_init+0x0/0x41f returned -6 after 17578 usecs
[ 6.239007] initcall applicom_init+0x0/0x41f returned with error code -6
[ 6.246007] calling sonypi_init+0x0/0x79 @ 1
[ 6.250006] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 6.257009] initcall sonypi_init+0x0/0x79 returned -19 after 6835 usecs
[ 6.263007] calling mod_init+0x0/0x1cb @ 1
[ 6.267131] initcall mod_init+0x0/0x1cb returned -19 after 976 usecs
[ 6.274007] calling mod_init+0x0/0x41 @ 1
[ 6.278007] initcall mod_init+0x0/0x41 returned -19 after 0 usecs
[ 6.284007] calling init+0x0/0x68 @ 1
[ 6.288064] initcall init+0x0/0x68 returned 0 after 0 usecs
[ 6.293008] calling tlclk_init+0x0/0x1a5 @ 1
[ 6.298026] telclk_interrup = 0xf non-mcpbl0010 hw.
[ 6.302017] initcall tlclk_init+0x0/0x1a5 returned -6 after 3906 usecs
[ 6.309008] initcall tlclk_init+0x0/0x1a5 returned with error code -6
[ 6.315007] calling ipmi_init_msghandler_mod+0x0/0xc @ 1
[ 6.321064] ipmi message handler version 39.2
[ 6.325028] initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 3906 usecs
[ 6.333021] calling init_ipmi_devintf+0x0/0xd1 @ 1
[ 6.337006] ipmi device interface
[ 6.341064] initcall init_ipmi_devintf+0x0/0xd1 returned 0 after 3906 usecs
[ 6.348008] calling hangcheck_init+0x0/0x95 @ 1
[ 6.352007] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 6.361006] Hangcheck: Using get_cycles().
[ 6.365008] initcall hangcheck_init+0x0/0x95 returned 0 after 12695 usecs
[ 6.372007] calling serial8250_init+0x0/0xf4 @ 1
[ 6.377007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.383091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.390132] initcall serial8250_init+0x0/0xf4 returned 0 after 12695 usecs
[ 6.397008] calling serial8250_pci_init+0x0/0x16 @ 1
[ 6.402074] initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 usecs
[ 6.409008] calling fourport_init+0x0/0xf @ 1
[ 6.417210] initcall fourport_init+0x0/0xf returned 0 after 3906 usecs
[ 6.424008] calling hub6_init+0x0/0xf @ 1
[ 6.434214] initcall hub6_init+0x0/0xf returned 0 after 5859 usecs
[ 6.440010] calling isa_bus_init+0x0/0x33 @ 1
[ 6.445065] initcall isa_bus_init+0x0/0x33 returned 0 after 0 usecs
[ 6.451009] calling topology_sysfs_init+0x0/0x4c @ 1
[ 6.456050] initcall topology_sysfs_init+0x0/0x4c returned 0 after 0 usecs
[ 6.463008] calling cpqarray_init+0x0/0x24f @ 1
[ 6.467006] Compaq SMART2 Driver (v 2.6.0)
[ 6.472068] initcall cpqarray_init+0x0/0x24f returned -19 after 4882 usecs
[ 6.479008] calling cciss_init+0x0/0x20 @ 1
[ 6.483006] HP CISS Driver (v 3.6.20)
[ 6.487020] initcall cciss_init+0x0/0x20 returned 0 after 3906 usecs
[ 6.493008] calling init+0x0/0x24 @ 1
[ 6.497064] initcall init+0x0/0x24 returned 0 after 0 usecs
[ 6.502008] calling carm_init+0x0/0x16 @ 1
[ 6.506069] initcall carm_init+0x0/0x16 returned 0 after 0 usecs
[ 6.512008] calling sm501_base_init+0x0/0x20 @ 1
[ 6.517067] initcall sm501_base_init+0x0/0x20 returned 0 after 0 usecs
[ 6.524008] calling e1000_init_module+0x0/0x6e @ 1
[ 6.528008] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 6.535007] Copyright (c) 1999-2006 Intel Corporation.
[ 6.540070] initcall e1000_init_module+0x0/0x6e returned 0 after 11718 usecs
[ 6.547008] calling e1000_init_module+0x0/0x53 @ 1
[ 6.552007] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 6.558006] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 6.564070] initcall e1000_init_module+0x0/0x53 returned 0 after 11718 usecs
[ 6.571008] calling igb_init_module+0x0/0x43 @ 1
[ 6.576007] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
[ 6.582009] Copyright (c) 2008 Intel Corporation.
[ 6.587064] initcall igb_init_module+0x0/0x43 returned 0 after 10742 usecs
[ 6.594008] calling atl1_init_module+0x0/0x16 @ 1
[ 6.599064] initcall atl1_init_module+0x0/0x16 returned 0 after 0 usecs
[ 6.605008] calling atl1e_init_module+0x0/0x16 @ 1
[ 6.610063] initcall atl1e_init_module+0x0/0x16 returned 0 after 0 usecs
[ 6.617008] calling gem_init+0x0/0x16 @ 1
[ 6.621064] initcall gem_init+0x0/0x16 returned 0 after 0 usecs
[ 6.627008] calling vortex_init+0x0/0xbf @ 1
[ 6.631078] initcall vortex_init+0x0/0xbf returned 0 after 0 usecs
[ 6.637009] calling pcnet32_init_module+0x0/0x10a @ 1
[ 6.643007] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 6.649066] initcall pcnet32_init_module+0x0/0x10a returned 0 after 5859 usecs
[ 6.656008] calling e100_init_module+0x0/0x4d @ 1
[ 6.661007] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 6.667007] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.672064] initcall e100_init_module+0x0/0x4d returned 0 after 10742 usecs
[ 6.679008] calling tlan_probe+0x0/0x269 @ 1
[ 6.684029] ThunderLAN driver v1.15a
[ 6.687067] TLAN: 0 devices installed, PCI: 0 EISA: 0
[ 6.692064] initcall tlan_probe+0x0/0x269 returned -19 after 7812 usecs
[ 6.699008] calling epic_init+0x0/0x16 @ 1
[ 6.703064] initcall epic_init+0x0/0x16 returned 0 after 0 usecs
[ 6.709009] calling smsc9420_init_module+0x0/0x39 @ 1
[ 6.714070] initcall smsc9420_init_module+0x0/0x39 returned 0 after 0 usecs
[ 6.721008] calling sis190_init_module+0x0/0x16 @ 1
[ 6.726066] initcall sis190_init_module+0x0/0x16 returned 0 after 0 usecs
[ 6.733011] calling r6040_init+0x0/0x16 @ 1
[ 6.737064] initcall r6040_init+0x0/0x16 returned 0 after 0 usecs
[ 6.743027] calling yellowfin_init+0x0/0x16 @ 1
[ 6.748067] initcall yellowfin_init+0x0/0x16 returned 0 after 0 usecs
[ 6.754008] calling tg3_init+0x0/0x16 @ 1
[ 6.759026] initcall tg3_init+0x0/0x16 returned 0 after 976 usecs
[ 6.765008] calling sky2_init_module+0x0/0x47 @ 1
[ 6.769015] sky2 driver version 1.22
[ 6.773070] initcall sky2_init_module+0x0/0x47 returned 0 after 3906 usecs
[ 6.780009] calling starfire_init+0x0/0x16 @ 1
[ 6.784064] initcall starfire_init+0x0/0x16 returned 0 after 0 usecs
[ 6.791008] calling cicada_init+0x0/0x33 @ 1
[ 6.795066] initcall cicada_init+0x0/0x33 returned 0 after 0 usecs
[ 6.801008] calling lxt_init+0x0/0x33 @ 1
[ 6.806064] initcall lxt_init+0x0/0x33 returned 0 after 976 usecs
[ 6.812008] calling smsc_init+0x0/0x67 @ 1
[ 6.816067] initcall smsc_init+0x0/0x67 returned 0 after 0 usecs
[ 6.822008] calling vsc82xx_init+0x0/0x33 @ 1
[ 6.827067] initcall vsc82xx_init+0x0/0x33 returned 0 after 976 usecs
[ 6.834009] calling broadcom_init+0x0/0xdb @ 1
[ 6.839101] initcall broadcom_init+0x0/0xdb returned 0 after 976 usecs
[ 6.846009] calling sundance_init+0x0/0x16 @ 1
[ 6.850066] initcall sundance_init+0x0/0x16 returned 0 after 0 usecs
[ 6.856009] calling net_olddevs_init+0x0/0x82 @ 1
[ 6.861128] initcall net_olddevs_init+0x0/0x82 returned 0 after 0 usecs
[ 6.868008] calling init_nic+0x0/0x16 @ 1
[ 6.872023] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
[ 6.873062] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 6.874055] nv_probe: set workaround bit for reversed mac addr
[ 7.387307] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[ 7.388009] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 7.389068] initcall init_nic+0x0/0x16 returned 0 after 504883 usecs
[ 7.396027] calling ql3xxx_init_module+0x0/0x16 @ 1
[ 7.401073] initcall ql3xxx_init_module+0x0/0x16 returned 0 after 0 usecs
[ 7.407009] calling ppp_init+0x0/0x8a @ 1
[ 7.411024] PPP generic driver version 2.4.2
[ 7.416096] initcall ppp_init+0x0/0x8a returned 0 after 4882 usecs
[ 7.422009] calling ppp_sync_init+0x0/0x2d @ 1
[ 7.427018] initcall ppp_sync_init+0x0/0x2d returned 0 after 0 usecs
[ 7.433009] calling pppox_init+0x0/0xf @ 1
[ 7.437008] NET: Registered protocol family 24
[ 7.441009] initcall pppox_init+0x0/0xf returned 0 after 3906 usecs
[ 7.448009] calling pppoe_init+0x0/0x87 @ 1
[ 7.452021] initcall pppoe_init+0x0/0x87 returned 0 after 0 usecs
[ 7.458009] calling pppol2tp_init+0x0/0x7e @ 1
[ 7.463012] PPPoL2TP kernel driver, V1.0
[ 7.466009] initcall pppol2tp_init+0x0/0x7e returned 0 after 2929 usecs
[ 7.473009] calling slip_init+0x0/0xa3 @ 1
[ 7.477008] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 7.487007] CSLIP: code copyright 1989 Regents of the University of California.
[ 7.494007] SLIP linefill/keepalive option.
[ 7.498012] initcall slip_init+0x0/0xa3 returned 0 after 20507 usecs
[ 7.505009] calling dummy_init_module+0x0/0x95 @ 1
[ 7.510212] initcall dummy_init_module+0x0/0x95 returned 0 after 976 usecs
[ 7.517010] calling rtl8139_init_module+0x0/0x16 @ 1
[ 7.522033] 8139too Fast Ethernet driver 0.9.28
[ 7.524202] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
[ 7.525008] eth1: Identified 8139 chip type 'RTL-8139B'
[ 7.527069] initcall rtl8139_init_module+0x0/0x16 returned 0 after 4882 usecs
[ 7.534027] calling sc92031_init+0x0/0x20 @ 1
[ 7.538008] Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
[ 7.544071] initcall sc92031_init+0x0/0x20 returned 0 after 5859 usecs
[ 7.551009] calling eql_init_module+0x0/0x50 @ 1
[ 7.555007] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 7.564217] initcall eql_init_module+0x0/0x50 returned 0 after 8789 usecs
[ 7.571009] calling veth_init+0x0/0xf @ 1
[ 7.575019] initcall veth_init+0x0/0xf returned 0 after 0 usecs
[ 7.581009] calling enc28j60_init+0x0/0x1e @ 1
[ 7.585065] initcall enc28j60_init+0x0/0x1e returned 0 after 0 usecs
[ 7.592009] calling streamer_init_module+0x0/0x16 @ 1
[ 7.597073] initcall streamer_init_module+0x0/0x16 returned 0 after 0 usecs
[ 7.604009] calling abyss_init+0x0/0x16 @ 1
[ 7.608065] initcall abyss_init+0x0/0x16 returned 0 after 0 usecs
[ 7.614009] calling hdlc_module_init+0x0/0x37 @ 1
[ 7.619011] HDLC support module revision 1.22
[ 7.623010] initcall hdlc_module_init+0x0/0x37 returned 0 after 3906 usecs
[ 7.630009] calling mod_init+0x0/0x11 @ 1
[ 7.634009] initcall mod_init+0x0/0x11 returned 0 after 0 usecs
[ 7.640009] calling mod_init+0x0/0x11 @ 1
[ 7.644011] initcall mod_init+0x0/0x11 returned 0 after 0 usecs
[ 7.650009] calling mod_init+0x0/0x39 @ 1
[ 7.654009] initcall mod_init+0x0/0x39 returned 0 after 0 usecs
[ 7.660009] calling fst_init+0x0/0x33 @ 1
[ 7.664065] initcall fst_init+0x0/0x33 returned 0 after 0 usecs
[ 7.670009] calling pc300_init_module+0x0/0x5c @ 1
[ 7.675064] initcall pc300_init_module+0x0/0x5c returned 0 after 0 usecs
[ 7.682009] calling arcnet_init+0x0/0x50 @ 1
[ 7.686007] arcnet loaded.
[ 7.689009] initcall arcnet_init+0x0/0x50 returned 0 after 2929 usecs
[ 7.695009] calling arcnet_rfc1201_init+0x0/0x65 @ 1
[ 7.700007] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 7.707009] initcall arcnet_rfc1201_init+0x0/0x65 returned 0 after 6835 usecs
[ 7.714009] calling com90xx_init+0x0/0xd79 @ 1
[ 7.718013] arcnet: COM90xx chipset support
[ 8.022900] S3: No ARCnet cards found.
[ 8.027017] initcall com90xx_init+0x0/0xd79 returned -5 after 301758 usecs
[ 8.034010] initcall com90xx_init+0x0/0xd79 returned with error code -5
[ 8.040009] calling arc_rimi_init+0x0/0x41f @ 1
[ 8.045023] arcnet: RIM I (entirely mem-mapped) support
[ 8.050008] E-mail me if you actually test the RIM I driver, please!
[ 8.056009] arc%d: Given: node 00h, shmem 0h, irq 0
[ 8.061008] arc%d: No autoprobe for RIM I; you must specify the shmem and irq!
[ 8.069019] initcall arc_rimi_init+0x0/0x41f returned -5 after 23437 usecs
[ 8.075010] initcall arc_rimi_init+0x0/0x41f returned with error code -5
[ 8.082009] calling pegasus_init+0x0/0x126 @ 1
[ 8.087008] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 8.094065] usbcore: registered new interface driver pegasus
[ 8.100012] initcall pegasus_init+0x0/0x126 returned 0 after 12695 usecs
[ 8.107010] calling strip_init_driver+0x0/0x57 @ 1
[ 8.111008] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
[ 8.118015] initcall strip_init_driver+0x0/0x57 returned 0 after 6835 usecs
[ 8.125010] calling init_netconsole+0x0/0x1af @ 1
[ 8.129010] console [netcon0] enabled
[ 8.133008] netconsole: network logging started
[ 8.138010] initcall init_netconsole+0x0/0x1af returned 0 after 8789 usecs
[ 8.144010] calling spi_transport_init+0x0/0x27 @ 1
[ 8.150065] initcall spi_transport_init+0x0/0x27 returned 0 after 976 usecs
[ 8.156012] calling fc_transport_init+0x0/0x43 @ 1
[ 8.162069] initcall fc_transport_init+0x0/0x43 returned 0 after 976 usecs
[ 8.168010] calling sas_transport_init+0x0/0x9f @ 1
[ 8.174100] initcall sas_transport_init+0x0/0x9f returned 0 after 976 usecs
[ 8.181010] calling scsi_dh_init+0x0/0x34 @ 1
[ 8.185010] initcall scsi_dh_init+0x0/0x34 returned 0 after 0 usecs
[ 8.192009] calling clariion_init+0x0/0x2c @ 1
[ 8.196008] emc: device handler registered
[ 8.200009] initcall clariion_init+0x0/0x2c returned 0 after 3906 usecs
[ 8.207009] calling ahc_linux_init+0x0/0x61 @ 1
[ 8.212068] initcall ahc_linux_init+0x0/0x61 returned 0 after 976 usecs
[ 8.218010] calling init_osst+0x0/0x10f @ 1
[ 8.222075] osst :I: Tape driver with OnStream support version 0.99.4
[ 8.222077] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 8.236071] Driver 'osst' needs updating - please use bus_type methods
[ 8.242067] initcall init_osst+0x0/0x10f returned 0 after 19531 usecs
[ 8.248027] calling init_sd+0x0/0xdb @ 1
[ 8.253069] Driver 'sd' needs updating - please use bus_type methods
[ 8.259066] initcall init_sd+0x0/0xdb returned 0 after 6835 usecs
[ 8.265038] calling init_ch_module+0x0/0x8c @ 1
[ 8.270008] SCSI Media Changer driver v0.25
[ 8.274065] Driver 'ch' needs updating - please use bus_type methods
[ 8.280067] initcall init_ch_module+0x0/0x8c returned 0 after 9765 usecs
[ 8.287009] calling ahci_init+0x0/0x16 @ 1
[ 8.291075] initcall ahci_init+0x0/0x16 returned 0 after 0 usecs
[ 8.297010] calling piix_init+0x0/0x24 @ 1
[ 8.301065] initcall piix_init+0x0/0x24 returned 0 after 0 usecs
[ 8.307012] calling pdc_ata_init+0x0/0x16 @ 1
[ 8.312065] initcall pdc_ata_init+0x0/0x16 returned 0 after 0 usecs
[ 8.318010] calling svia_init+0x0/0x16 @ 1
[ 8.322065] initcall svia_init+0x0/0x16 returned 0 after 0 usecs
[ 8.328010] calling vsc_sata_init+0x0/0x16 @ 1
[ 8.333065] initcall vsc_sata_init+0x0/0x16 returned 0 after 0 usecs
[ 8.339010] calling nv_init+0x0/0x16 @ 1
[ 8.343065] initcall nv_init+0x0/0x16 returned 0 after 0 usecs
[ 8.349010] calling uli_init+0x0/0x16 @ 1
[ 8.353065] initcall uli_init+0x0/0x16 returned 0 after 0 usecs
[ 8.359010] calling inic_init+0x0/0x16 @ 1
[ 8.363065] initcall inic_init+0x0/0x16 returned 0 after 0 usecs
[ 8.369010] calling amd_init+0x0/0x16 @ 1
[ 8.373023] pata_amd 0000:00:06.0: version 0.4.1
[ 8.374075] pata_amd 0000:00:06.0: setting latency timer to 64
[ 8.375080] scsi0 : pata_amd
[ 8.377161] scsi1 : pata_amd
[ 8.378101] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 8.379017] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 8.539029] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[ 8.545010] ata1.00: 488397168 sectors, multi 1: LBA48
[ 8.550029] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 8.570043] ata1.00: configured for UDMA/100
[ 8.574012] async_waiting @ 9
[ 8.575009] async_continuing @ 9 after 0 usec
[ 8.576162] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 8.578079] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 8.579041] sd 0:0:0:0: [sda] Write Protect is off
[ 8.580010] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.581067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.582113] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 8.583036] sd 0:0:0:0: [sda] Write Protect is off
[ 8.584009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.585060] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.586011] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 8.676041] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.678020] async_waiting @ 9
[ 8.679009] async_continuing @ 9 after 0 usec
[ 8.845243] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[ 8.851030] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[ 8.866193] ata2.01: configured for UDMA/33
[ 8.872088] async_waiting @ 9
[ 8.873009] async_continuing @ 9 after 0 usec
[ 8.874121] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
[ 8.876118] initcall amd_init+0x0/0x16 returned 0 after 491211 usecs
[ 8.882011] calling atiixp_init+0x0/0x16 @ 1
[ 8.887089] initcall atiixp_init+0x0/0x16 returned 0 after 976 usecs
[ 8.893011] calling cmd640_init+0x0/0x16 @ 1
[ 8.897106] initcall cmd640_init+0x0/0x16 returned 0 after 0 usecs
[ 8.903010] calling cmd64x_init+0x0/0x16 @ 1
[ 8.908066] initcall cmd64x_init+0x0/0x16 returned 0 after 0 usecs
[ 8.914010] calling cs5520_init+0x0/0x16 @ 1
[ 8.918077] initcall cs5520_init+0x0/0x16 returned 0 after 0 usecs
[ 8.925010] calling hpt37x_init+0x0/0x16 @ 1
[ 8.929065] initcall hpt37x_init+0x0/0x16 returned 0 after 0 usecs
[ 8.935010] calling hpt3x2n_init+0x0/0x16 @ 1
[ 8.940066] initcall hpt3x2n_init+0x0/0x16 returned 0 after 0 usecs
[ 8.946010] calling it821x_init+0x0/0x16 @ 1
[ 8.950075] initcall it821x_init+0x0/0x16 returned 0 after 0 usecs
[ 8.956010] calling ns87415_init+0x0/0x16 @ 1
[ 8.961066] initcall ns87415_init+0x0/0x16 returned 0 after 0 usecs
[ 8.967010] calling oldpiix_init+0x0/0x16 @ 1
[ 8.972068] initcall oldpiix_init+0x0/0x16 returned 0 after 976 usecs
[ 8.978011] calling qdi_init+0x0/0x1b4 @ 1
[ 8.982011] initcall qdi_init+0x0/0x1b4 returned -19 after 0 usecs
[ 8.988010] calling serverworks_init+0x0/0x16 @ 1
[ 8.993067] initcall serverworks_init+0x0/0x16 returned 0 after 0 usecs
[ 9.000011] calling sil680_init+0x0/0x16 @ 1
[ 9.004066] initcall sil680_init+0x0/0x16 returned 0 after 0 usecs
[ 9.010010] calling sis_init+0x0/0x16 @ 1
[ 9.014066] initcall sis_init+0x0/0x16 returned 0 after 0 usecs
[ 9.020010] calling i2o_iop_init+0x0/0x41 @ 1
[ 9.025008] I2O subsystem v1.325
[ 9.028009] i2o: max drivers = 8
[ 9.031077] initcall i2o_iop_init+0x0/0x41 returned 0 after 5859 usecs
[ 9.038011] calling i2o_config_init+0x0/0x82 @ 1
[ 9.043008] I2O Configuration OSM v1.323
[ 9.047131] initcall i2o_config_init+0x0/0x82 returned 0 after 3906 usecs
[ 9.053011] calling i2o_bus_init+0x0/0x37 @ 1
[ 9.058009] I2O Bus Adapter OSM v1.317
[ 9.062065] initcall i2o_bus_init+0x0/0x37 returned 0 after 3906 usecs
[ 9.068011] calling fusion_init+0x0/0x10c @ 1
[ 9.073009] Fusion MPT base driver 3.04.07
[ 9.077008] Copyright (c) 1999-2008 LSI Corporation
[ 9.081031] initcall fusion_init+0x0/0x10c returned 0 after 8789 usecs
[ 9.088012] calling mptspi_init+0x0/0xb9 @ 1
[ 9.092009] Fusion MPT SPI Host driver 3.04.07
[ 9.097066] initcall mptspi_init+0x0/0xb9 returned 0 after 4882 usecs
[ 9.103011] calling mptsas_init+0x0/0xd1 @ 1
[ 9.108009] Fusion MPT SAS Host driver 3.04.07
[ 9.112065] initcall mptsas_init+0x0/0xd1 returned 0 after 3906 usecs
[ 9.118011] calling uio_init+0x0/0x7 @ 1
[ 9.122010] initcall uio_init+0x0/0x7 returned 0 after 0 usecs
[ 9.128011] calling sercos3_init_module+0x0/0x16 @ 1
[ 9.133066] initcall sercos3_init_module+0x0/0x16 returned 0 after 0 usecs
[ 9.140011] calling spidev_init+0x0/0x82 @ 1
[ 9.145070] initcall spidev_init+0x0/0x82 returned 0 after 976 usecs
[ 9.151014] calling uwb_subsys_init+0x0/0x46 @ 1
[ 9.156066] initcall uwb_subsys_init+0x0/0x46 returned 0 after 0 usecs
[ 9.162011] calling wlp_subsys_init+0x0/0x7 @ 1
[ 9.167011] initcall wlp_subsys_init+0x0/0x7 returned 0 after 0 usecs
[ 9.173011] calling hwarc_driver_init+0x0/0x16 @ 1
[ 9.178066] usbcore: registered new interface driver hwa-rc
[ 9.184013] initcall hwarc_driver_init+0x0/0x16 returned 0 after 5859 usecs
[ 9.191011] calling ehci_hcd_init+0x0/0xbe @ 1
[ 9.195009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.202010] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 9.208028] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 9.209034] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
[ 9.210011] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[ 9.211079] initcall ehci_hcd_init+0x0/0xbe returned 0 after 15625 usecs
[ 9.218011] calling isp116x_init+0x0/0x38 @ 1
[ 9.222010] 116x: driver isp116x-hcd, 03 Nov 2005
[ 9.227069] initcall isp116x_init+0x0/0x38 returned 0 after 4882 usecs
[ 9.233011] calling ohci_hcd_mod_init+0x0/0xb1 @ 1
[ 9.238029] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.244010] ohci_hcd: block sizes: ed 64 td 64
[ 9.249028] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 9.250025] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
[ 9.251011] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[ 9.252125] initcall ohci_hcd_mod_init+0x0/0xb1 returned 0 after 13671 usecs
[ 9.259016] calling uhci_hcd_init+0x0/0x107 @ 1
[ 9.264010] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.270074] initcall uhci_hcd_init+0x0/0x107 returned 0 after 5859 usecs
[ 9.277011] calling r8a66597_init+0x0/0x38 @ 1
[ 9.282036] r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
[ 9.287069] initcall r8a66597_init+0x0/0x38 returned 0 after 4882 usecs
[ 9.294011] calling isp1760_init+0x0/0x2a @ 1
[ 9.299071] initcall isp1760_init+0x0/0x2a returned 0 after 976 usecs
[ 9.305019] calling wusbcore_init+0x0/0x66 @ 1
[ 9.309030] initcall wusbcore_init+0x0/0x66 returned 0 after 0 usecs
[ 9.316011] calling cbaf_driver_init+0x0/0x16 @ 1
[ 9.321069] usbcore: registered new interface driver wusb-cbaf
[ 9.326013] initcall cbaf_driver_init+0x0/0x16 returned 0 after 4882 usecs
[ 9.333029] calling usb_stor_init+0x0/0x42 @ 1
[ 9.338009] Initializing USB Mass Storage driver...
[ 9.343069] usbcore: registered new interface driver usb-storage
[ 9.349018] USB Mass Storage support registered.
[ 9.353011] initcall usb_stor_init+0x0/0x42 returned 0 after 14648 usecs
[ 9.360011] calling usb_usual_init+0x0/0x30 @ 1
[ 9.365067] usbcore: registered new interface driver libusual
[ 9.370013] initcall usb_usual_init+0x0/0x30 returned 0 after 5859 usecs
[ 9.377019] calling adu_init+0x0/0x7b @ 1
[ 9.381009] drivers/usb/misc/adutux.c : adu_init : enter
[ 9.387060] usbcore: registered new interface driver adutux
[ 9.392010] adutux adutux (see www.ontrak.net) v0.0.13
[ 9.397009] adutux is an experimental driver. Use at your own risk
[ 9.403009] drivers/usb/misc/adutux.c : adu_init : leave, return value 0
[ 9.410011] initcall adu_init+0x0/0x7b returned 0 after 28320 usecs
[ 9.416011] calling appledisplay_init+0x0/0x4b @ 1
[ 9.421066] usbcore: registered new interface driver appledisplay
[ 9.427013] initcall appledisplay_init+0x0/0x4b returned 0 after 5859 usecs
[ 9.434013] calling cypress_init+0x0/0x2f @ 1
[ 9.439066] usbcore: registered new interface driver cypress_cy7c63
[ 9.445013] initcall cypress_init+0x0/0x2f returned 0 after 5859 usecs
[ 9.452011] calling emi26_init+0x0/0x16 @ 1
[ 9.456066] usbcore: registered new interface driver emi26 - firmware loader
[ 9.463013] initcall emi26_init+0x0/0x16 returned 0 after 6835 usecs
[ 9.469011] calling usb_idmouse_init+0x0/0x3a @ 1
[ 9.474009] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
[ 9.480066] usbcore: registered new interface driver idmouse
[ 9.486013] initcall usb_idmouse_init+0x0/0x3a returned 0 after 11718 usecs
[ 9.493011] calling usb_lcd_init+0x0/0x2f @ 1
[ 9.497066] usbcore: registered new interface driver usblcd
[ 9.503013] initcall usb_lcd_init+0x0/0x2f returned 0 after 5859 usecs
[ 9.509011] calling ld_usb_init+0x0/0x2f @ 1
[ 9.514049] usbcore: registered new interface driver ldusb
[ 9.519013] initcall ld_usb_init+0x0/0x2f returned 0 after 5859 usecs
[ 9.525011] calling usb_led_init+0x0/0x2f @ 1
[ 9.530066] usbcore: registered new interface driver usbled
[ 9.535013] initcall usb_led_init+0x0/0x2f returned 0 after 4882 usecs
[ 9.542011] calling usb_rio_init+0x0/0x2d @ 1
[ 9.546066] usbcore: registered new interface driver rio500
[ 9.552011] rio500: v1.1:USB Rio 500 driver
[ 9.556011] initcall usb_rio_init+0x0/0x2d returned 0 after 9765 usecs
[ 9.563011] calling usbtest_init+0x0/0x3b @ 1
[ 9.567066] usbcore: registered new interface driver usbtest
[ 9.573013] initcall usbtest_init+0x0/0x3b returned 0 after 5859 usecs
[ 9.579011] calling usb_sevseg_init+0x0/0x2f @ 1
[ 9.584066] usbcore: registered new interface driver usbsevseg
[ 9.590013] initcall usb_sevseg_init+0x0/0x2f returned 0 after 5859 usecs
[ 9.596011] calling i8042_init+0x0/0x33d @ 1
[ 9.601069] PNP: No PS/2 controller found. Probing ports directly.
[ 9.609959] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.615015] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.620018] initcall i8042_init+0x0/0x33d returned 0 after 18554 usecs
[ 9.627011] calling emu_init+0x0/0x16 @ 1
[ 9.631068] initcall emu_init+0x0/0x16 returned 0 after 0 usecs
[ 9.637012] calling ns558_init+0x0/0x345 @ 1
[ 9.649862] initcall ns558_init+0x0/0x345 returned 0 after 8789 usecs
[ 9.656011] calling mousedev_init+0x0/0x51 @ 1
[ 9.661095] mice: PS/2 mouse device common for all mice
[ 9.666012] initcall mousedev_init+0x0/0x51 returned 0 after 4882 usecs
[ 9.673011] calling joydev_init+0x0/0xf @ 1
[ 9.677012] initcall joydev_init+0x0/0xf returned 0 after 0 usecs
[ 9.683010] calling evdev_init+0x0/0xf @ 1
[ 9.687011] initcall evdev_init+0x0/0xf returned 0 after 0 usecs
[ 9.693010] calling atkbd_init+0x0/0x20 @ 1
[ 9.698070] initcall atkbd_init+0x0/0x20 returned 0 after 976 usecs
[ 9.704012] calling lkkbd_init+0x0/0x16 @ 1
[ 9.708067] initcall lkkbd_init+0x0/0x16 returned 0 after 0 usecs
[ 9.714011] calling xtkbd_init+0x0/0x16 @ 1
[ 9.718066] initcall xtkbd_init+0x0/0x16 returned 0 after 976 usecs
[ 9.720213] input: AT Translated Set 2 keyboard as /class/input/input0
[ 9.731011] calling a3d_init+0x0/0x16 @ 1
[ 9.735069] initcall a3d_init+0x0/0x16 returned 0 after 0 usecs
[ 9.741011] calling analog_init+0x0/0xcd @ 1
[ 9.746069] initcall analog_init+0x0/0xcd returned 0 after 0 usecs
[ 9.752011] calling grip_init+0x0/0x16 @ 1
[ 9.756068] initcall grip_init+0x0/0x16 returned 0 after 0 usecs
[ 9.762011] calling iforce_init+0x0/0x41 @ 1
[ 9.766067] usbcore: registered new interface driver iforce
[ 9.772066] initcall iforce_init+0x0/0x41 returned 0 after 5859 usecs
[ 9.778011] calling interact_init+0x0/0x16 @ 1
[ 9.783069] initcall interact_init+0x0/0x16 returned 0 after 0 usecs
[ 9.789011] calling warrior_init+0x0/0x16 @ 1
[ 9.794067] initcall warrior_init+0x0/0x16 returned 0 after 0 usecs
[ 9.800011] calling usb_xpad_init+0x0/0x2d @ 1
[ 9.805067] usbcore: registered new interface driver xpad
[ 9.810011] xpad: X-Box pad driver
[ 9.814011] initcall usb_xpad_init+0x0/0x2d returned 0 after 8789 usecs
[ 9.820011] calling ads7846_init+0x0/0xf @ 1
[ 9.825066] initcall ads7846_init+0x0/0xf returned 0 after 0 usecs
[ 9.831011] calling gunze_init+0x0/0x16 @ 1
[ 9.835066] initcall gunze_init+0x0/0x16 returned 0 after 0 usecs
[ 9.841011] calling elo_init+0x0/0x16 @ 1
[ 9.845067] initcall elo_init+0x0/0x16 returned 0 after 0 usecs
[ 9.851013] calling mk712_init+0x0/0x1b7 @ 1
[ 9.856012] mk712: device not present
[ 9.859014] initcall mk712_init+0x0/0x1b7 returned -19 after 2929 usecs
[ 9.866012] calling pm_init+0x0/0x16 @ 1
[ 9.870066] initcall pm_init+0x0/0x16 returned 0 after 0 usecs
[ 9.876011] calling touchit213_init+0x0/0x16 @ 1
[ 9.880066] initcall touchit213_init+0x0/0x16 returned 0 after 0 usecs
[ 9.887011] calling tr_init+0x0/0x16 @ 1
[ 9.891067] initcall tr_init+0x0/0x16 returned 0 after 0 usecs
[ 9.897011] calling pcspkr_init+0x0/0xf @ 1
[ 9.901128] input: PC Speaker as /class/input/input1
[ 9.914108] initcall pcspkr_init+0x0/0xf returned 0 after 13671 usecs
[ 9.921012] calling wb_module_init+0x0/0x256 @ 1
[ 9.926022] wistron_btns: System unknown
[ 9.929011] initcall wb_module_init+0x0/0x256 returned -19 after 2929 usecs
[ 9.936011] calling ati_remote_init+0x0/0x3c @ 1
[ 9.941072] usbcore: registered new interface driver ati_remote
[ 9.947011] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[ 9.953042] initcall ati_remote_init+0x0/0x3c returned 0 after 11718 usecs
[ 9.959011] calling ati_remote2_init+0x0/0x3c @ 1
[ 9.964069] usbcore: registered new interface driver ati_remote2
[ 9.970012] ati_remote2: ATI/Philips USB RF remote driver 0.3
[ 9.976011] initcall ati_remote2_init+0x0/0x3c returned 0 after 11718 usecs
[ 9.983011] calling powermate_init+0x0/0x16 @ 1
[ 9.988035] usbcore: registered new interface driver powermate
[ 9.993013] initcall powermate_init+0x0/0x16 returned 0 after 5859 usecs
[ 10.000020] calling cm109_init+0x0/0xdc @ 1
[ 10.004010] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 10.010069] usbcore: registered new interface driver cm109
[ 10.015020] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 10.022011] initcall cm109_init+0x0/0xdc returned 0 after 17578 usecs
[ 10.028011] calling uinput_init+0x0/0xf @ 1
[ 10.033072] initcall uinput_init+0x0/0xf returned 0 after 0 usecs
[ 10.039011] calling ds1286_init+0x0/0xf @ 1
[ 10.043066] initcall ds1286_init+0x0/0xf returned 0 after 0 usecs
[ 10.049011] calling ds1307_init+0x0/0x11 @ 1
[ 10.054067] i2c-core: driver [rtc-ds1307] registered
[ 10.058012] initcall ds1307_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.065011] calling ds1390_init+0x0/0xf @ 1
[ 10.069067] initcall ds1390_init+0x0/0xf returned 0 after 0 usecs
[ 10.075011] calling ds1511_rtc_init+0x0/0xf @ 1
[ 10.080067] initcall ds1511_rtc_init+0x0/0xf returned 0 after 0 usecs
[ 10.086011] calling ds1553_init+0x0/0xf @ 1
[ 10.091066] initcall ds1553_init+0x0/0xf returned 0 after 0 usecs
[ 10.097011] calling ds1672_init+0x0/0x11 @ 1
[ 10.101067] i2c-core: driver [rtc-ds1672] registered
[ 10.106011] initcall ds1672_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.112011] calling ds3234_init+0x0/0xf @ 1
[ 10.117067] initcall ds3234_init+0x0/0xf returned 0 after 0 usecs
[ 10.123013] calling m41t94_init+0x0/0xf @ 1
[ 10.127067] initcall m41t94_init+0x0/0xf returned 0 after 0 usecs
[ 10.133011] calling m48t86_rtc_init+0x0/0xf @ 1
[ 10.138066] initcall m48t86_rtc_init+0x0/0xf returned 0 after 0 usecs
[ 10.144011] calling bq4802_init+0x0/0xf @ 1
[ 10.148067] initcall bq4802_init+0x0/0xf returned 0 after 0 usecs
[ 10.154011] calling max6900_init+0x0/0x11 @ 1
[ 10.159066] i2c-core: driver [rtc-max6900] registered
[ 10.164011] initcall max6900_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.170011] calling max6902_init+0x0/0xf @ 1
[ 10.175067] initcall max6902_init+0x0/0xf returned 0 after 0 usecs
[ 10.181011] calling pcf8583_init+0x0/0x11 @ 1
[ 10.185066] i2c-core: driver [pcf8583] registered
[ 10.190012] initcall pcf8583_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.197011] calling rs5c372_init+0x0/0x11 @ 1
[ 10.201067] i2c-core: driver [rtc-rs5c372] registered
[ 10.206012] initcall rs5c372_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.213011] calling twl4030_rtc_init+0x0/0xf @ 1
[ 10.217066] initcall twl4030_rtc_init+0x0/0xf returned 0 after 0 usecs
[ 10.224011] calling i2c_ali1535_init+0x0/0x16 @ 1
[ 10.229067] initcall i2c_ali1535_init+0x0/0x16 returned 0 after 0 usecs
[ 10.235011] calling i2c_sch_init+0x0/0x16 @ 1
[ 10.240065] initcall i2c_sch_init+0x0/0x16 returned 0 after 0 usecs
[ 10.246011] calling nforce2_init+0x0/0x16 @ 1
[ 10.250156] i2c-adapter i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered
[ 10.251033] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 10.252078] i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered
[ 10.253011] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 10.254072] initcall nforce2_init+0x0/0x16 returned 0 after 3906 usecs
[ 10.261029] calling ocores_i2c_init+0x0/0xf @ 1
[ 10.265073] initcall ocores_i2c_init+0x0/0xf returned 0 after 0 usecs
[ 10.272027] calling i2c_parport_init+0x0/0x12e @ 1
[ 10.276010] i2c-parport-light: adapter type unspecified
[ 10.282011] initcall i2c_parport_init+0x0/0x12e returned -19 after 5859 usecs
[ 10.289011] calling i2c_pca_pf_init+0x0/0xf @ 1
[ 10.293069] initcall i2c_pca_pf_init+0x0/0xf returned 0 after 976 usecs
[ 10.300011] calling ds1682_init+0x0/0x11 @ 1
[ 10.304068] i2c-core: driver [ds1682] registered
[ 10.309013] initcall ds1682_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.315017] calling max6875_init+0x0/0x11 @ 1
[ 10.320067] i2c-core: driver [max6875] registered
[ 10.325020] initcall max6875_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.331013] calling pcf8575_init+0x0/0x11 @ 1
[ 10.336051] i2c-core: driver [pcf8575] registered
[ 10.340019] initcall pcf8575_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.347015] calling w1_init+0x0/0x90 @ 1
[ 10.351010] Driver for 1-wire Dallas network protocol.
[ 10.356082] initcall w1_init+0x0/0x90 returned 0 after 4882 usecs
[ 10.362011] calling ds_init+0x0/0x40 @ 1
[ 10.366066] usbcore: registered new interface driver DS9490R
[ 10.372013] initcall ds_init+0x0/0x40 returned 0 after 5859 usecs
[ 10.378011] calling sensors_ds2482_init+0x0/0x11 @ 1
[ 10.383067] i2c-core: driver [ds2482] registered
[ 10.387019] initcall sensors_ds2482_init+0x0/0x11 returned 0 after 3906 usecs
[ 10.395011] calling w1_ds2760_init+0x0/0x23 @ 1
[ 10.399010] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 10.408012] initcall w1_ds2760_init+0x0/0x23 returned 0 after 8789 usecs
[ 10.415011] calling w1_bq27000_init+0x0/0x1d @ 1
[ 10.419011] initcall w1_bq27000_init+0x0/0x1d returned 0 after 0 usecs
[ 10.426011] calling pcwd_init_module+0x0/0x14 @ 1
[ 10.432035] initcall pcwd_init_module+0x0/0x14 returned -19 after 976 usecs
[ 10.438012] calling acq_init+0x0/0x50 @ 1
[ 10.442010] WDT driver for Acquire single board computer initialising.
[ 10.449072] acquirewdt: I/O address 0x0043 already in use
[ 10.455019] acquirewdt: probe of acquirewdt failed with error -5
[ 10.460012] initcall acq_init+0x0/0x50 returned 0 after 17578 usecs
[ 10.467011] calling advwdt_init+0x0/0x50 @ 1
[ 10.471010] WDT driver for Advantech single board computer initialising.
[ 10.478105] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[ 10.484013] initcall advwdt_init+0x0/0x50 returned 0 after 12695 usecs
[ 10.491042] calling alim7101_wdt_init+0x0/0x16d @ 1
[ 10.496010] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 10.501016] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[ 10.507012] initcall alim7101_wdt_init+0x0/0x16d returned -16 after 10742 usecs
[ 10.514012] initcall alim7101_wdt_init+0x0/0x16d returned with error code -16
[ 10.522011] calling wafwdt_init+0x0/0x147 @ 1
[ 10.526010] WDT driver for Wafer 5823 single board computer initialising.
[ 10.533014] Wafer 5823 WDT: I/O address 0x0443 already in use
[ 10.539014] initcall wafwdt_init+0x0/0x147 returned -5 after 12695 usecs
[ 10.545012] initcall wafwdt_init+0x0/0x147 returned with error code -5
[ 10.552011] calling watchdog_init+0x0/0x23c @ 1
[ 10.556015] initcall watchdog_init+0x0/0x23c returned -19 after 0 usecs
[ 10.563012] calling iTCO_wdt_init_module+0x0/0x56 @ 1
[ 10.568010] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.574079] iTCO_wdt: No card detected
[ 10.578025] initcall iTCO_wdt_init_module+0x0/0x56 returned 0 after 9765 usecs
[ 10.585012] calling iTCO_vendor_init_module+0x0/0x17 @ 1
[ 10.590010] iTCO_vendor_support: vendor-support=0
[ 10.595012] initcall iTCO_vendor_init_module+0x0/0x17 returned 0 after 4882 usecs
[ 10.602012] calling it8712f_wdt_init+0x0/0x1a9 @ 1
[ 10.607043] it8712f_wdt: Found IT8712F chip revision 7 - using DogFood address 0x201
[ 10.615014] it8712f_wdt: disabling watchdog timer
[ 10.620033] it8712f_wdt: cannot register miscdev on minor=130 (err=-16)
[ 10.626014] initcall it8712f_wdt_init+0x0/0x1a9 returned -16 after 18554 usecs
[ 10.633012] initcall it8712f_wdt_init+0x0/0x1a9 returned with error code -16
[ 10.640013] calling sc1200wdt_init+0x0/0x161 @ 1
[ 10.645010] sc1200wdt: build 20020303
[ 10.649068] sc1200wdt: io parameter must be specified
[ 10.654067] initcall sc1200wdt_init+0x0/0x161 returned -22 after 8789 usecs
[ 10.661023] initcall sc1200wdt_init+0x0/0x161 returned with error code -22
[ 10.668012] calling sch311x_wdt_init+0x0/0x136 @ 1
[ 10.673030] initcall sch311x_wdt_init+0x0/0x136 returned -19 after 0 usecs
[ 10.679012] calling watchdog_init+0x0/0xa5 @ 1
[ 10.684012] epx_c3: cannot register miscdev on minor=130 (err=-16)
[ 10.690014] initcall watchdog_init+0x0/0xa5 returned -16 after 5859 usecs
[ 10.697012] initcall watchdog_init+0x0/0xa5 returned with error code -16
[ 10.704012] calling isdn_init+0x0/0x273 @ 1
[ 10.709198] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2
[ 10.716014] initcall isdn_init+0x0/0x273 returned 0 after 7812 usecs
[ 10.723012] calling divert_init+0x0/0x59 @ 1
[ 10.727029] dss1_divert module successfully installed
[ 10.733012] initcall divert_init+0x0/0x59 returned 0 after 5859 usecs
[ 10.739012] calling sc_init+0x0/0xed4 @ 1
[ 10.743011] SpellCaster ISA ISDN Adapter Driver rev. 2.0b1
[ 10.749010] Copyright (C) 1996 SpellCaster Telecommunications Inc.
[ 10.755267] Failed to find any adapters, driver unloaded
[ 10.761012] initcall sc_init+0x0/0xed4 returned -19 after 17578 usecs
[ 10.767012] calling edac_init+0x0/0xa7 @ 1
[ 10.771010] EDAC MC: Ver: 2.1.0 Mar 18 2009
[ 10.776070] initcall edac_init+0x0/0xa7 returned 0 after 4882 usecs
[ 10.782012] calling i82975x_init+0x0/0x85 @ 1
[ 10.787068] initcall i82975x_init+0x0/0x85 returned -19 after 976 usecs
[ 10.793012] calling i82860_init+0x0/0x85 @ 1
[ 10.798079] initcall i82860_init+0x0/0x85 returned -19 after 976 usecs
[ 10.804012] calling r82600_init+0x0/0x29 @ 1
[ 10.809070] initcall r82600_init+0x0/0x29 returned 0 after 0 usecs
[ 10.815012] calling pci_eisa_init_module+0x0/0x16 @ 1
[ 10.820068] initcall pci_eisa_init_module+0x0/0x16 returned 0 after 0 usecs
[ 10.827012] calling virtual_eisa_root_init+0x0/0x48 @ 1
[ 10.832068] EISA: Probing bus 0 at eisa.0
[ 10.836069] initcall virtual_eisa_root_init+0x0/0x48 returned -1 after 3906 usecs
[ 10.844013] initcall virtual_eisa_root_init+0x0/0x48 returned with error code -1
[ 10.851012] calling cpufreq_stats_init+0x0/0x7a @ 1
[ 10.856013] initcall cpufreq_stats_init+0x0/0x7a returned 0 after 0 usecs
[ 10.863012] calling cpufreq_gov_userspace_init+0x0/0xf @ 1
[ 10.868013] initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 0 usecs
[ 10.876015] calling clevo_mail_led_init+0x0/0x7e @ 1
[ 10.881015] initcall clevo_mail_led_init+0x0/0x7e returned -19 after 0 usecs
[ 10.888012] calling pca955x_leds_init+0x0/0x11 @ 1
[ 10.893068] i2c-core: driver [leds-pca955x] registered
[ 10.898016] initcall pca955x_leds_init+0x0/0x11 returned 0 after 4882 usecs
[ 10.905012] calling timer_trig_init+0x0/0xf @ 1
[ 10.909013] initcall timer_trig_init+0x0/0xf returned 0 after 0 usecs
[ 10.916012] calling dcdrbu_init+0x0/0x105 @ 1
[ 10.920067] initcall dcdrbu_init+0x0/0x105 returned 0 after 0 usecs
[ 10.926012] calling hifn_init+0x0/0x19 @ 1
[ 10.931011] HIFN supports only 32-bit addresses.
[ 10.935012] initcall hifn_init+0x0/0x19 returned -22 after 3906 usecs
[ 10.942012] initcall hifn_init+0x0/0x19 returned with error code -22
[ 10.948012] calling hid_init+0x0/0x3d @ 1
[ 10.952069] initcall hid_init+0x0/0x3d returned 0 after 0 usecs
[ 10.958012] calling usb_mouse_init+0x0/0x2d @ 1
[ 10.963069] usbcore: registered new interface driver usbmouse
[ 10.969012] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 10.974012] initcall usb_mouse_init+0x0/0x2d returned 0 after 10742 usecs
[ 10.981012] calling virtio_pci_init+0x0/0x44 @ 1
[ 10.986068] initcall virtio_pci_init+0x0/0x44 returned 0 after 0 usecs
[ 10.992013] calling flow_cache_init+0x0/0x13e @ 1
[ 10.997155] initcall flow_cache_init+0x0/0x13e returned 0 after 0 usecs
[ 11.004012] calling llc_init+0x0/0x1b @ 1
[ 11.008014] initcall llc_init+0x0/0x1b returned 0 after 0 usecs
[ 11.014012] calling snap_init+0x0/0x2a @ 1
[ 11.018014] initcall snap_init+0x0/0x2a returned 0 after 0 usecs
[ 11.024012] calling rif_init+0x0/0x6b @ 1
[ 11.028038] initcall rif_init+0x0/0x6b returned 0 after 0 usecs
[ 11.034012] calling blackhole_module_init+0x0/0xf @ 1
[ 11.039013] initcall blackhole_module_init+0x0/0xf returned 0 after 0 usecs
[ 11.046012] calling gred_module_init+0x0/0xf @ 1
[ 11.051012] initcall gred_module_init+0x0/0xf returned 0 after 0 usecs
[ 11.057012] calling multiq_module_init+0x0/0xf @ 1
[ 11.062013] initcall multiq_module_init+0x0/0xf returned 0 after 0 usecs
[ 11.069012] calling init_rsvp+0x0/0xf @ 1
[ 11.073012] initcall init_rsvp+0x0/0xf returned 0 after 0 usecs
[ 11.079012] calling init_tcindex+0x0/0xf @ 1
[ 11.083012] initcall init_tcindex+0x0/0xf returned 0 after 0 usecs
[ 11.089012] calling nfnetlink_init+0x0/0x4f @ 1
[ 11.094011] Netfilter messages via NETLINK v0.30.
[ 11.098022] initcall nfnetlink_init+0x0/0x4f returned 0 after 3906 usecs
[ 11.105012] calling nfnetlink_log_init+0x0/0x8a @ 1
[ 11.110024] initcall nfnetlink_log_init+0x0/0x8a returned 0 after 0 usecs
[ 11.117013] calling sysctl_ipv4_init+0x0/0x3f @ 1
[ 11.121321] initcall sysctl_ipv4_init+0x0/0x3f returned 0 after 976 usecs
[ 11.128012] calling ah4_init+0x0/0x5a @ 1
[ 11.133014] initcall ah4_init+0x0/0x5a returned 0 after 0 usecs
[ 11.138012] calling esp4_init+0x0/0x5a @ 1
[ 11.143013] initcall esp4_init+0x0/0x5a returned 0 after 0 usecs
[ 11.149012] calling ipcomp4_init+0x0/0x5a @ 1
[ 11.153013] initcall ipcomp4_init+0x0/0x5a returned 0 after 0 usecs
[ 11.159017] calling ipip_init+0x0/0x88 @ 1
[ 11.163014] initcall ipip_init+0x0/0x88 returned 0 after 0 usecs
[ 11.169013] calling tunnel4_init+0x0/0x5a @ 1
[ 11.174013] initcall tunnel4_init+0x0/0x5a returned 0 after 0 usecs
[ 11.180013] calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1
[ 11.185013] initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs
[ 11.192014] calling ipv4_netfilter_init+0x0/0x20 @ 1
[ 11.197013] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
[ 11.204013] calling inet_diag_init+0x0/0x82 @ 1
[ 11.209027] initcall inet_diag_init+0x0/0x82 returned 0 after 0 usecs
[ 11.215013] calling tcp_diag_init+0x0/0xf @ 1
[ 11.220013] initcall tcp_diag_init+0x0/0xf returned 0 after 0 usecs
[ 11.226012] calling hybla_register+0x0/0xf @ 1
[ 11.230012] TCP hybla registered
[ 11.234013] initcall hybla_register+0x0/0xf returned 0 after 3906 usecs
[ 11.240012] calling htcp_register+0x0/0xf @ 1
[ 11.245011] TCP htcp registered
[ 11.248013] initcall htcp_register+0x0/0xf returned 0 after 2929 usecs
[ 11.254013] calling tcp_vegas_register+0x0/0x11 @ 1
[ 11.259011] TCP vegas registered
[ 11.262013] initcall tcp_vegas_register+0x0/0x11 returned 0 after 2929 usecs
[ 11.269013] calling tcp_yeah_register+0x0/0x11 @ 1
[ 11.274011] TCP yeah registered
[ 11.277013] initcall tcp_yeah_register+0x0/0x11 returned 0 after 2929 usecs
[ 11.284013] calling packet_init+0x0/0x39 @ 1
[ 11.289013] NET: Registered protocol family 17
[ 11.293021] initcall packet_init+0x0/0x39 returned 0 after 3906 usecs
[ 11.300013] calling ipsec_pfkey_init+0x0/0x70 @ 1
[ 11.304011] NET: Registered protocol family 15
[ 11.309033] initcall ipsec_pfkey_init+0x0/0x70 returned 0 after 4882 usecs
[ 11.316013] calling br_init+0x0/0xae @ 1
[ 11.320151] initcall br_init+0x0/0xae returned 0 after 0 usecs
[ 11.326013] calling dsa_init_module+0x0/0x11 @ 1
[ 11.330012] initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs
[ 11.337012] calling trailer_init_module+0x0/0x11 @ 1
[ 11.342012] initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs
[ 11.349012] calling mv88e6060_init+0x0/0x11 @ 1
[ 11.353012] initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs
[ 11.360012] calling mv88e6131_init+0x0/0x11 @ 1
[ 11.364012] initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs
[ 11.371012] calling dsa_init_module+0x0/0xf @ 1
[ 11.375069] initcall dsa_init_module+0x0/0xf returned 0 after 0 usecs
[ 11.382012] calling ipx_init+0x0/0xd2 @ 1
[ 11.386129] NET: Registered protocol family 4
[ 11.394040] initcall ipx_init+0x0/0xd2 returned 0 after 7812 usecs
[ 11.400012] calling atalk_init+0x0/0x77 @ 1
[ 11.405011] NET: Registered protocol family 5
[ 11.415051] initcall atalk_init+0x0/0x77 returned 0 after 9765 usecs
[ 11.422013] calling x25_init+0x0/0x50 @ 1
[ 11.426011] NET: Registered protocol family 9
[ 11.430012] X.25 for Linux Version 0.2
[ 11.434050] initcall x25_init+0x0/0x50 returned 0 after 7812 usecs
[ 11.440012] calling af_rxrpc_init+0x0/0x167 @ 1
[ 11.445138] NET: Registered protocol family 33
[ 11.449022] initcall af_rxrpc_init+0x0/0x167 returned 0 after 4882 usecs
[ 11.456012] calling wimax_subsys_init+0x0/0x1d7 @ 1
[ 11.464041] initcall wimax_subsys_init+0x0/0x1d7 returned 0 after 2929 usecs
[ 11.471013] calling update_mp_table+0x0/0x597 @ 1
[ 11.476013] initcall update_mp_table+0x0/0x597 returned 0 after 0 usecs
[ 11.483013] calling lapic_insert_resource+0x0/0x45 @ 1
[ 11.488014] initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 usecs
[ 11.495012] calling print_ipi_mode+0x0/0x26 @ 1
[ 11.499011] Using IPI Shortcut mode
[ 11.503012] initcall print_ipi_mode+0x0/0x26 returned 0 after 3906 usecs
[ 11.510012] calling ioapic_insert_resources+0x0/0x42 @ 1
[ 11.515013] initcall ioapic_insert_resources+0x0/0x42 returned 0 after 0 usecs
[ 11.522013] calling io_apic_bug_finalize+0x0/0x1a @ 1
[ 11.527013] initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs
[ 11.534013] calling check_early_ioremap_leak+0x0/0x5e @ 1
[ 11.540013] initcall check_early_ioremap_leak+0x0/0x5e returned 0 after 0 usecs
[ 11.547013] calling pat_memtype_list_init+0x0/0x23 @ 1
[ 11.552023] initcall pat_memtype_list_init+0x0/0x23 returned 0 after 0 usecs
[ 11.559015] calling init_oops_id+0x0/0x40 @ 1
[ 11.564013] initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
[ 11.570013] calling disable_boot_consoles+0x0/0x36 @ 1
[ 11.575013] initcall disable_boot_consoles+0x0/0x36 returned 0 after 0 usecs
[ 11.582013] calling pm_qos_power_init+0x0/0xae @ 1
[ 11.587154] initcall pm_qos_power_init+0x0/0xae returned 0 after 0 usecs
[ 11.594013] calling debugfs_kprobe_init+0x0/0x80 @ 1
[ 11.599023] initcall debugfs_kprobe_init+0x0/0x80 returned 0 after 0 usecs
[ 11.606013] calling clear_boot_tracer+0x0/0x27 @ 1
[ 11.611013] initcall clear_boot_tracer+0x0/0x27 returned 0 after 0 usecs
[ 11.617013] calling afs_init+0x0/0x183 @ 1
[ 11.621011] kAFS: Red Hat AFS client v0.1 registering.
[ 11.627197] initcall afs_init+0x0/0x183 returned 0 after 5859 usecs
[ 11.633014] calling random32_reseed+0x0/0x83 @ 1
[ 11.638026] initcall random32_reseed+0x0/0x83 returned 0 after 0 usecs
[ 11.644013] calling pci_sysfs_init+0x0/0x44 @ 1
[ 11.649178] initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs
[ 11.655013] calling seqgen_init+0x0/0xe @ 1
[ 11.660027] initcall seqgen_init+0x0/0xe returned 0 after 0 usecs
[ 11.666014] calling scsi_complete_async_scans+0x0/0x110 @ 1
[ 11.671016] initcall scsi_complete_async_scans+0x0/0x110 returned 0 after 0 usecs
[ 11.679012] calling rtc_hctosys+0x0/0x11c @ 1
[ 11.683012] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 11.689013] initcall rtc_hctosys+0x0/0x11c returned -19 after 5859 usecs
[ 11.696013] calling edd_init+0x0/0x2e3 @ 1
[ 11.701012] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 11.707011] EDD information not available.
[ 11.711013] initcall edd_init+0x0/0x2e3 returned -19 after 9765 usecs
[ 11.717012] calling memmap_init+0x0/0x8e @ 1
[ 11.722074] initcall memmap_init+0x0/0x8e returned 0 after 0 usecs
[ 11.728013] calling tcp_congestion_default+0x0/0xf @ 1
[ 11.733014] initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
[ 11.740013] calling ip_auto_config+0x0/0x835 @ 1
[ 11.745020] initcall ip_auto_config+0x0/0x835 returned 0 after 0 usecs
[ 11.751043] async_waiting @ 1
[ 11.754012] async_continuing @ 1 after 0 usec
[ 11.760078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.766012] EXT3-fs: write access will be enabled during recovery.
[ 11.808076] kjournald starting. Commit interval 5 seconds
[ 11.808076] EXT3-fs: recovery complete.
[ 11.808107] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.808107] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 11.808143] async_waiting @ 1
[ 11.808145] async_continuing @ 1 after 0 usec
[ 11.808155] Freeing unused kernel memory: 424k freed
[ 15.313101] EXT3 FS on sda1, internal journal
[ 15.369046] kjournald starting. Commit interval 5 seconds
[ 15.374092] EXT3 FS on sda5, internal journal
[ 15.379016] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.970745] IPv4 FIB: Using LC-trie version 0.408
[ 17.288951] eth0: no link during initialization.
[ 19.607061] eth0: link up.
next prev parent reply other threads:[~2009-03-18 9:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1237325938-5240-1-git-send-email-fweisbec@gmail.com>
2009-03-17 21:46 ` [PATCH] tracing/ftrace: stop {irqs,preempt}soff tracers when tracing is stopped Steven Rostedt
2009-03-17 21:49 ` Frederic Weisbecker
2009-03-17 21:59 ` Steven Rostedt
2009-03-17 22:54 ` Frederic Weisbecker
2009-03-18 8:59 ` Ingo Molnar
2009-03-18 9:18 ` Ingo Molnar
2009-03-18 9:29 ` Ingo Molnar [this message]
2009-03-18 14:31 ` Steven Rostedt
2009-03-18 14:00 ` Steven Rostedt
2009-03-18 9:19 ` [tip:tracing/ftrace] tracing/ftrace: stop {irqs, preempt}soff " Frederic Weisbecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090318092929.GA8475@elte.hu \
--to=mingo@elte.hu \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.