From: Steven King <sfking@fdwdc.com>
To: Greg Ungerer <gerg@snapgear.com>
Cc: uClinux development list <uclinux-dev@uclinux.org>,
linux-kernel@vger.kernel.org
Subject: Re: [RFC 01/14] Coldfire generic GPIO (m68knommu)
Date: Thu, 19 Mar 2009 09:19:44 -0700 [thread overview]
Message-ID: <200903190919.44927.sfking@fdwdc.com> (raw)
In-Reply-To: <49C1E70C.2050404@snapgear.com>
On Wednesday, March 18, 2009 11:32:44 Greg Ungerer wrote:
> Hi Steven,
>
> Steven King wrote:
> > The basic Coldfire generic gpio implementation.
> >
> > Signed-off-by: Steven King <sfking@fdwdc.com>
> >
> > diff --git a/arch/m68knommu/platform/coldfire/gpio.c
> > b/arch/m68knommu/platform/coldfire/gpio.c
> > new file mode 100644
> > index 0000000..c2504b9
> > --- /dev/null
> > +++ b/arch/m68knommu/platform/coldfire/gpio.c
> > @@ -0,0 +1,1969 @@
> > +/*
> > + * Coldfire generic GPIO support.
> > + *
> > + * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; version 2 of the License.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/init.h>
> > +#include <linux/sysdev.h>
> > +
> > +#include <asm/gpio.h>
> > +#include <asm/pinmux.h>
> > +
> > +struct mcf_gpio_chip {
> > + struct gpio_chip gpio_chip;
> > + void __iomem *pddr;
> > + void __iomem *podr;
> > + void __iomem *ppdr;
> > + void __iomem *setr;
> > + void __iomem *clrr;
> > + const u8 *gpio_to_pinmux;
> > +};
> > +
> > +#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip,
> > gpio_chip) +
> > +static int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned
> > offset) +{
> > + unsigned long flags;
> > + MCFGPIO_PORTTYPE dir;
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + local_irq_save(flags);
> > + dir = mcfgpio_read(mcf_chip->pddr);
> > + dir &= ~mcfgpio_bit(chip->base + offset);
> > + mcfgpio_write(dir, mcf_chip->pddr);
> > + local_irq_restore(flags);
> > +
> > + return 0;
> > +}
> > +
> > +static int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
> > +{
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
> > +}
> > +
> > +static int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned
> > offset, + int value)
> > +{
> > + unsigned long flags;
> > + MCFGPIO_PORTTYPE data;
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + local_irq_save(flags);
> > + /* write the value to the output latch */
> > + data = mcfgpio_read(mcf_chip->podr);
> > + if (value)
> > + data |= mcfgpio_bit(chip->base + offset);
> > + else
> > + data &= ~mcfgpio_bit(chip->base + offset);
> > + mcfgpio_write(data, mcf_chip->podr);
> > +
> > + /* now set the direction to output */
> > + data = mcfgpio_read(mcf_chip->pddr);
> > + data |= mcfgpio_bit(chip->base + offset);
> > + mcfgpio_write(data, mcf_chip->pddr);
> > + local_irq_restore(flags);
> > +
> > + return 0;
> > +}
> > +
> > +static void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset,
> > + int value)
> > +{
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + unsigned long flags;
> > + MCFGPIO_PORTTYPE data;
> > +
> > + local_irq_save(flags);
> > + data = mcfgpio_read(mcf_chip->podr);
> > + if (value)
> > + data |= mcfgpio_bit(chip->base + offset);
> > + else
> > + data &= ~mcfgpio_bit(chip->base + offset);
> > + mcfgpio_write(data, mcf_chip->podr);
> > + local_irq_restore(flags);
> > +}
> > +
> > +#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
> > + defined(CONFIG_M527x) || defined(CONFIG_M528x) ||
> > defined(CONFIG_M532x) +static void mcf_gpio_set_value_fast(struct
> > gpio_chip *chip, unsigned offset, + int value)
> > +{
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + if (value)
> > + mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
> > + else
> > + mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
> > +}
> > +#endif
> > +static int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
> > +{
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + return mcf_chip->gpio_to_pinmux ?
> > + mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
> > +}
> > +
> > +static void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
> > +{
> > + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
> > +
> > + mcf_gpio_direction_input(chip, offset);
> > +
> > + if (mcf_chip->gpio_to_pinmux)
> > + mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
> > +}
> > +
> > +static struct mcf_gpio_chip mcf_gpio_chips[] = {
> > +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
>
> I would rather see this table's contents in the per-platform
> setup code (so under ~/arch/m68knommu/platform/m5206, etc).
> Associated with each family members specific code. I would have a
> gpio.c in each platform directory just for this.
>
> Keep the common code above in coldfire/gpio.c (the support functions
> could obviously no longer be static). When new family members
> are created/added this common coldfire/gpio.c won't need to be
> touched.
Yeah, I was trying to keep the implementation details static as much as
possible. Having a per-platform table means the struct mcf_gpio_chip also
needs to go into a header which I found mildly aesthetically unpleasing. Oh
well.
> Otherwise I don't see any specific problems with it.
Cool. I'll fold the per-platform table into the next version of the patch which
adds pinmux support (and which definately is going to require per-platform
files).
--
Steven King -- sfking at fdwdc dot com
prev parent reply other threads:[~2009-03-19 16:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-11 21:55 [RFC 01/14] Coldfire generic GPIO (m68knommu) Steven King
2009-03-19 6:32 ` Greg Ungerer
2009-03-19 16:19 ` Steven King [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903190919.44927.sfking@fdwdc.com \
--to=sfking@fdwdc.com \
--cc=gerg@snapgear.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.