All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jouni Malinen <jouni.malinen@atheros.com>
To: "John W. Linville" <linville@tuxdriver.com>,
	Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org,
	Jouni Malinen <jouni.malinen@atheros.com>
Subject: [PATCH 2/4] nl80211: Add more through validation of MLME command parameters
Date: Fri, 20 Mar 2009 21:21:17 +0200	[thread overview]
Message-ID: <20090320192353.233644676@atheros.com> (raw)
In-Reply-To: 20090320192115.448175935@atheros.com

Check that the used authentication type and reason code are valid here
so that drivers/mac80211 do not need to care about this. In addition,
remove the unnecessary validation of SSID attribute length which is
taken care of by netlink policy.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

---
 net/wireless/nl80211.c |   32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

--- uml.orig/net/wireless/nl80211.c	2009-03-20 18:03:53.000000000 +0200
+++ uml/net/wireless/nl80211.c	2009-03-20 18:03:57.000000000 +0200
@@ -2614,6 +2614,14 @@ static int nl80211_dump_scan(struct sk_b
 	return err;
 }
 
+static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type)
+{
+	return auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM ||
+		auth_type == NL80211_AUTHTYPE_SHARED_KEY ||
+		auth_type == NL80211_AUTHTYPE_FT ||
+		auth_type == NL80211_AUTHTYPE_NETWORK_EAP;
+}
+
 static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *drv;
@@ -2666,6 +2674,10 @@ static int nl80211_authenticate(struct s
 	if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
 		req.auth_type =
 			nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
+		if (!nl80211_valid_auth_type(req.auth_type)) {
+			err = -EINVAL;
+			goto out;
+		}
 	}
 
 	err = drv->ops->auth(&drv->wiphy, dev, &req);
@@ -2718,10 +2730,6 @@ static int nl80211_associate(struct sk_b
 		}
 	}
 
-	if (nla_len(info->attrs[NL80211_ATTR_SSID]) > IEEE80211_MAX_SSID_LEN) {
-		err = -EINVAL;
-		goto out;
-	}
 	req.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
 	req.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
 
@@ -2769,9 +2777,15 @@ static int nl80211_deauthenticate(struct
 
 	req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (info->attrs[NL80211_ATTR_REASON_CODE])
+	if (info->attrs[NL80211_ATTR_REASON_CODE]) {
 		req.reason_code =
 			nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+		if (req.reason_code == 0) {
+			/* Reason Code 0 is reserved */
+			err = -EINVAL;
+			goto out;
+		}
+	}
 
 	if (info->attrs[NL80211_ATTR_IE]) {
 		req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
@@ -2817,9 +2831,15 @@ static int nl80211_disassociate(struct s
 
 	req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (info->attrs[NL80211_ATTR_REASON_CODE])
+	if (info->attrs[NL80211_ATTR_REASON_CODE]) {
 		req.reason_code =
 			nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+		if (req.reason_code == 0) {
+			/* Reason Code 0 is reserved */
+			err = -EINVAL;
+			goto out;
+		}
+	}
 
 	if (info->attrs[NL80211_ATTR_IE]) {
 		req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);

-- 

-- 
Jouni Malinen                                            PGP id EFC895FA

  parent reply	other threads:[~2009-03-20 19:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-20 19:21 [PATCH 0/4] nl80211: Cleanup cfg80211/mac80211 attribute validation Jouni Malinen
2009-03-20 19:21 ` [PATCH 1/4] nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IE Jouni Malinen
2009-03-21  8:03   ` Johannes Berg
2009-03-20 19:21 ` Jouni Malinen [this message]
2009-03-21  8:04   ` [PATCH 2/4] nl80211: Add more through validation of MLME command parameters Johannes Berg
2009-03-20 19:21 ` [PATCH 3/4] nl80211: Check that netif_runnin is true in cfg80211 code Jouni Malinen
2009-03-21  8:05   ` Johannes Berg
2009-03-20 19:21 ` [PATCH 4/4] nl80211: Check iftype " Jouni Malinen
2009-03-21  8:06   ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090320192353.233644676@atheros.com \
    --to=jouni.malinen@atheros.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.