Re: tg3 driver fails to load firmware (2.6.29)

[Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>]

* Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>:
> * Michael Tokarev <mjt@tls.msk.ru>:
> > Ralf Hildebrandt wrote:
> >> From the log:
> >>
> >> Mar 24 09:02:42 proxy-cvk-2 kernel: [   40.600196] tg3 0000:02:02.1: firmware: requesting tigon/tg3_tso.bin
> >> Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599130] eth1: Failed to load firmware "tigon/tg3_tso.bin"
> >
> >> # ll /lib/firmware/2.6.29/tigon/tg3_tso.bin
> >> -rw-r--r-- 1 root root 7004 Mar 24 09:24 /lib/firmware/2.6.29/tigon/tg3_tso.bin
> >
> > Shouldn't it be in /lib/firmware/tigon/tg3_tso.bin ?
> 
> Well, who knows...
> 
> proxy-cvk-1:/lib/firmware# cp -a 2.6.29/tigon .  
> proxy-cvk-1:/lib/firmware# ll
> total 12
> drwxr-xr-x 3 root root 4096 Mar 24 09:24 2.6.29
> drwxr-xr-x 3 root root 4096 Mar 17 16:31 2.6.29-rc8-git2
> drwxr-xr-x 2 root root 4096 Mar 24 09:24 tigon
> 
> Let's see if that work.s

Nope, doesn't. Still the same.

[    6.637970] tg3 0000:02:02.0: PME# disabled
[    8.175091] tg3 0000:02:02.1: firmware: requesting tigon/tg3_tso.bin
[    9.198453] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[    9.198507] tg3: eth0: Flow control is on for TX and on for RX.
[   68.174144] eth1: Failed to load firmware "tigon/tg3_tso.bin"
[   68.174206] eth1: TSO capability disabled.
[   68.174274] tg3 0000:02:02.1: PME# disabled
[   71.070553] tg3: eth1: Link is up at 1000 Mbps, full duplex.
[   71.070608] tg3: eth1: Flow control is on for TX and on for RX.

-- 
Ralf Hildebrandt
  Geschäftsbereich IT | Abteilung Netzwerk
  Charité - Universitätsmedizin Berlin
  Campus Benjamin Franklin
  Hindenburgdamm 30 | D-12200 Berlin
  Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962
  Ralf.Hildebrandt@charite.de | http://www.charite.de