diff for duplicates of <20090325025944.GA12447@kamineko.org> diff --git a/a/1.txt b/N1/1.txt index 0896488..1207696 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,55 +1,37 @@ On Sun, Mar 22, 2009 at 10:15:17AM +0900, Mattia Dongili wrote: > On Sat, Mar 21, 2009 at 11:30:29AM -0700, Abhi Kolekar wrote: -> > On Fri, Mar 20, 2009 at 11:50 PM, Mattia Dongili <malattia@linux.it= -> wrote: +> > On Fri, Mar 20, 2009 at 11:50 PM, Mattia Dongili <malattia@linux.it> wrote: > > > Hello, > > > > > > I get this error consistently with all the recent kernels: -> > > [ =A0338.476057] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: t= -ime out after 500ms. -> > > [ =A0458.976089] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: t= -ime out after 500ms. -> > > [ =A0598.885036] iwl3945: Microcode SW error detected. =A0Restart= -ing 0x82000008. -> > > [ =A0598.885050] iwl3945: Error Reply type 0x00000005 cmd REPLY_T= -X (0x1C) seq 0x02AC ser 0x0000004E -> > > [ =A0601.869319] iwl3945: Can't stop Rx DMA. -> > > then the wifi connection becomes useless and I have to re-associa= -te to -> > > the AP or sometimes to unload and reload the module to get my con= -nection +> > > [ 338.476057] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms. +> > > [ 458.976089] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms. +> > > [ 598.885036] iwl3945: Microcode SW error detected. Restarting 0x82000008. +> > > [ 598.885050] iwl3945: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x02AC ser 0x0000004E +> > > [ 601.869319] iwl3945: Can't stop Rx DMA. +> > > then the wifi connection becomes useless and I have to re-associate to +> > > the AP or sometimes to unload and reload the module to get my connection > > > back. > > > -> > > The above is on 2.6.29-rc8 but I get it since 2.6.28 (apologies f= -or not +> > > The above is on 2.6.29-rc8 but I get it since 2.6.28 (apologies for not Actually since 2.6.27. -> > > reporting it earlier). =A0Both my thinkpad x60s and my vaio sz72b= - are +> > > reporting it earlier). Both my thinkpad x60s and my vaio sz72b are > > > affected. -> > > Reproducing it is very easy, I just need to download even a small= - file. +> > > Reproducing it is very easy, I just need to download even a small file. > > > -> > > After reading some older bug submissions I rebuilt the driver wit= -h debug -> > > support and loaded it with debug=3D0x43fff, the log is here: +> > > After reading some older bug submissions I rebuilt the driver with debug +> > > support and loaded it with debug=0x43fff, the log is here: > > > http://kamineko.org/kernel/kern.log -> > > The beginning of the log is 2.6.28 with no debug, then you can se= -e a +> > > The beginning of the log is 2.6.28 with no debug, then you can see a > > > reboot and the module loaded with the debug option on 2.6.29-rc8. > > > -> > > Is this a known problem? Is there any other information I can pro= -vide to +> > > Is this a known problem? Is there any other information I can provide to > > > help fixing it? Anyone? ---=20 +-- mattia :wq! --- -To unsubscribe from this list: send the line "unsubscribe linux-wireles= -s" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index d55a6bd..c823764 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -14,58 +14,40 @@ "b\0" "On Sun, Mar 22, 2009 at 10:15:17AM +0900, Mattia Dongili wrote:\n" "> On Sat, Mar 21, 2009 at 11:30:29AM -0700, Abhi Kolekar wrote:\n" - "> > On Fri, Mar 20, 2009 at 11:50 PM, Mattia Dongili <malattia@linux.it=\n" - "> wrote:\n" + "> > On Fri, Mar 20, 2009 at 11:50 PM, Mattia Dongili <malattia@linux.it> wrote:\n" "> > > Hello,\n" "> > >\n" "> > > I get this error consistently with all the recent kernels:\n" - "> > > [ =A0338.476057] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: t=\n" - "ime out after 500ms.\n" - "> > > [ =A0458.976089] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: t=\n" - "ime out after 500ms.\n" - "> > > [ =A0598.885036] iwl3945: Microcode SW error detected. =A0Restart=\n" - "ing 0x82000008.\n" - "> > > [ =A0598.885050] iwl3945: Error Reply type 0x00000005 cmd REPLY_T=\n" - "X (0x1C) seq 0x02AC ser 0x0000004E\n" - "> > > [ =A0601.869319] iwl3945: Can't stop Rx DMA.\n" - "> > > then the wifi connection becomes useless and I have to re-associa=\n" - "te to\n" - "> > > the AP or sometimes to unload and reload the module to get my con=\n" - "nection\n" + "> > > [ \302\240338.476057] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.\n" + "> > > [ \302\240458.976089] iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.\n" + "> > > [ \302\240598.885036] iwl3945: Microcode SW error detected. \302\240Restarting 0x82000008.\n" + "> > > [ \302\240598.885050] iwl3945: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x02AC ser 0x0000004E\n" + "> > > [ \302\240601.869319] iwl3945: Can't stop Rx DMA.\n" + "> > > then the wifi connection becomes useless and I have to re-associate to\n" + "> > > the AP or sometimes to unload and reload the module to get my connection\n" "> > > back.\n" "> > >\n" - "> > > The above is on 2.6.29-rc8 but I get it since 2.6.28 (apologies f=\n" - "or not\n" + "> > > The above is on 2.6.29-rc8 but I get it since 2.6.28 (apologies for not\n" "\n" "Actually since 2.6.27.\n" "\n" - "> > > reporting it earlier). =A0Both my thinkpad x60s and my vaio sz72b=\n" - " are\n" + "> > > reporting it earlier). \302\240Both my thinkpad x60s and my vaio sz72b are\n" "> > > affected.\n" - "> > > Reproducing it is very easy, I just need to download even a small=\n" - " file.\n" + "> > > Reproducing it is very easy, I just need to download even a small file.\n" "> > >\n" - "> > > After reading some older bug submissions I rebuilt the driver wit=\n" - "h debug\n" - "> > > support and loaded it with debug=3D0x43fff, the log is here:\n" + "> > > After reading some older bug submissions I rebuilt the driver with debug\n" + "> > > support and loaded it with debug=0x43fff, the log is here:\n" "> > > http://kamineko.org/kernel/kern.log\n" - "> > > The beginning of the log is 2.6.28 with no debug, then you can se=\n" - "e a\n" + "> > > The beginning of the log is 2.6.28 with no debug, then you can see a\n" "> > > reboot and the module loaded with the debug option on 2.6.29-rc8.\n" "> > >\n" - "> > > Is this a known problem? Is there any other information I can pro=\n" - "vide to\n" + "> > > Is this a known problem? Is there any other information I can provide to\n" "> > > help fixing it?\n" "\n" "Anyone?\n" "\n" - "--=20\n" + "-- \n" "mattia\n" - ":wq!\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe linux-wireles=\n" - "s\" in\n" - "the body of a message to majordomo@vger.kernel.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + :wq! -cedb4ba20b028ccb667aeb7d0cda3bd10ae3e794daf4051e1fdd19a4e3e86f92 +87d53d3b08e34d1b9650fc42d754270e1295d44aecceece274b28abba4c55767
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.