From: p.vonbrunn@domain.hid
To: xenomai@xenomai.org
Subject: [Xenomai-help] Unable to use Xenomai-Services on ARM/S3C2410
Date: Fri, 27 Mar 2009 12:59:34 +0100 (CET) [thread overview]
Message-ID: <20090327115934.2C40C90005@domain.hid> (raw)
Hi guys,
I am currently trying to enable Real-Time-Support on my embedded NetDCU10
board (S3C2410), but with a lot of problems remaining so far... I am using
Kernel 2.6.19 delivered and pre-patched (some board-specific changes) with
my board. This kernel is configured, compiled and working well on the
target.
After this I tried to get Xenomai running on the machine. I am using
Xenomai 2.3.1 with Adeos-Patch ARM 2.6.19 1.70 (latest), which compiled
well (nucleus, skins etc. built in the kernel) but isn't working
correctly: "dmesg" tells me that the Xenomai-Domain has been registered by
I-pipe and the Xenomai-Services have been started, but I cannot run any
(i.e. trivial_periodic) of the Xenomai-Examples. They fail with "Xenomai
or XENO_OPT_PERVASIVE disabled", but Pervasive is enabled in the .config.
Did I miss anything?
I thank you for any response and suggestions!
(Shall I post my shell-script for Xenomai-compilation and/or the
config?)
Regards,
Patrick
next reply other threads:[~2009-03-27 11:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-27 11:59 p.vonbrunn [this message]
2009-03-27 13:35 ` [Xenomai-help] Unable to use Xenomai-Services on ARM/S3C2410 Gilles Chanteperdrix
2009-03-27 13:56 ` Gilles Chanteperdrix
-- strict thread matches above, loose matches on Subject: below --
2009-03-30 6:17 p.vonbrunn
2009-03-30 10:01 ` Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090327115934.2C40C90005@domain.hid \
--to=p.vonbrunn@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.