From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com
Subject: [PATCH 1/4] rt2x00: Move Move pci_dev specific access to rt2x00pci
Date: Sat, 28 Mar 2009 20:51:24 +0100 [thread overview]
Message-ID: <200903282051.25112.IvDoorn@gmail.com> (raw)
pci_dev->irq and pci_name(pci_dev) access should be limited
to rt2x00pci only. This is more generic and allows a rt2x00 pci
driver to be controlled as PCI device but also as platform driver
(needed for rt2800pci SoC support).
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++----
drivers/net/wireless/rt2x00/rt61pci.c | 7 +------
drivers/net/wireless/rt2x00/rt61pci.h | 6 ------
6 files changed, 33 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 0f08773..411eb9c 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1361,7 +1361,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
*/
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00pci_register_read(rt2x00dev, CSR0, ®);
- rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
!rt2x00_rf(&rt2x00dev->chip, RF2421)) {
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 276a823..e1be67c 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1525,7 +1525,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
*/
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00pci_register_read(rt2x00dev, CSR0, ®);
- rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
!rt2x00_rf(&rt2x00dev->chip, RF2523) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 84bd6f1..e03d699 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -672,6 +672,12 @@ struct rt2x00_dev {
unsigned long flags;
/*
+ * Device information, Bus IRQ and name (PCI, SoC)
+ */
+ int irq;
+ const char *name;
+
+ /*
* Chipset identification.
*/
struct rt2x00_chip chip;
@@ -860,6 +866,18 @@ static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
rt2x00dev->chip.rev = rev;
}
+static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
+ const u16 rt)
+{
+ rt2x00dev->chip.rt = rt;
+}
+
+static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
+ const u16 rf, const u32 rev)
+{
+ rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
+}
+
static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
{
return (chipset->rt == chip);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index e616c20..eef2761 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
{
- struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
struct data_queue *queue;
int status;
@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
/*
* Register interrupt handler.
*/
- status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
- IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
+ status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
+ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
if (status) {
ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
- pci_dev->irq, status);
+ rt2x00dev->irq, status);
goto exit;
}
@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
+ u16 chip;
retval = pci_request_regions(pci_dev, pci_name(pci_dev));
if (retval) {
@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
rt2x00dev->dev = &pci_dev->dev;
rt2x00dev->ops = ops;
rt2x00dev->hw = hw;
+ rt2x00dev->irq = pci_dev->irq;
+ rt2x00dev->name = pci_name(pci_dev);
+
+ /*
+ * Determine RT chipset by reading PCI header.
+ */
+ pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
+ rt2x00_set_chip_rt(rt2x00dev, chip);
retval = rt2x00pci_alloc_reg(rt2x00dev);
if (retval)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 2ca8b7a..4346cd1 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2308,7 +2308,6 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
u32 reg;
u16 value;
u16 eeprom;
- u16 device;
/*
* Read EEPROM word for configuration.
@@ -2317,14 +2316,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
/*
* Identify RF chipset.
- * To determine the RT chip we have to read the
- * PCI header of the device.
*/
- pci_read_config_word(to_pci_dev(rt2x00dev->dev),
- PCI_CONFIG_HEADER_DEVICE, &device);
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
- rt2x00_set_chip(rt2x00dev, device, value, reg);
+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
!rt2x00_rf(&rt2x00dev->chip, RF5325) &&
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 41e8959..6c71f77 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -63,12 +63,6 @@
*/
/*
- * PCI Configuration Header
- */
-#define PCI_CONFIG_HEADER_VENDOR 0x0000
-#define PCI_CONFIG_HEADER_DEVICE 0x0002
-
-/*
* HOST_CMD_CSR: For HOST to interrupt embedded processor
*/
#define HOST_CMD_CSR 0x0008
--
1.5.6.1
next reply other threads:[~2009-03-28 19:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-28 19:51 Ivo van Doorn [this message]
2009-03-28 19:51 ` [PATCH 2/4] rt2x00: Fix Sparse warning Ivo van Doorn
2009-03-28 19:51 ` [PATCH 3/4] rt2x00: Don't free register information on suspend Ivo van Doorn
2009-03-28 19:52 ` [PATCH 4/4] rt2x00: Add rt73usb USB IDs Ivo van Doorn
2009-04-17 20:53 ` [PATCH 3/4] rt2x00: Don't free register information on suspend Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903282051.25112.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.