From: Eric Sesterhenn <snakebyte@gmx.de>
To: jgarzik@pobox.com
Cc: linux-kernel@vger.kernel.org
Subject: Suspend Warning in libata-core
Date: Mon, 30 Mar 2009 15:32:45 +0200 [thread overview]
Message-ID: <20090330133245.GA4631@alice> (raw)
hi,
todays -git (Last commit is Merge branch 'bzip2-lzma-for-linus') gives me two
warnings during suspend/resume selftest, which I did not see with 2.6.29-rc8
[ 22.854791] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 22.855183] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 22.855870] Suspending console(s) (use no_console_suspend to debug)
[ 22.867304] serial 00:08: disabled
[ 22.867733] matroxfb 0000:01:00.0: PCI INT A disabled
[ 22.868530] RIPTIDE 0000:00:12.0: PCI INT A disabled
[ 22.901218] aic7xxx 0000:00:0c.0: PCI INT A disabled
[ 22.916337] uhci_hcd 0000:00:07.2: PCI INT D disabled
[ 22.916617] ------------[ cut here ]------------
[ 22.916625] WARNING: at drivers/ata/libata-core.c:5360 ata_host_request_pm+0x136/0x140()
[ 22.916633] Modules linked in:
[ 22.916644] Pid: 1, comm: swapper Not tainted 2.6.29 #108
[ 22.916651] Call Trace:
[ 22.916677] [<c012a1ab>] warn_slowpath+0x8b/0x100
[ 22.916700] [<c0150c9c>] ? __lock_acquire+0x26c/0x1110
[ 22.916712] [<c0150531>] ? mark_held_locks+0x41/0x80
[ 22.916730] [<c0626425>] ? _spin_unlock_irqrestore+0x35/0x60
[ 22.916741] [<c0150791>] ? trace_hardirqs_on_caller+0x151/0x1c0
[ 22.916752] [<c015080b>] ? trace_hardirqs_on+0xb/0x10
[ 22.916772] [<c04590fa>] ? ata_port_wait_eh+0x7a/0xb0
[ 22.916795] [<c013eb20>] ? autoremove_wake_function+0x0/0x50
[ 22.916806] [<c044aaa6>] ata_host_request_pm+0x136/0x140
[ 22.916816] [<c044d45b>] ata_host_suspend+0xcb/0xf0
[ 22.916832] [<c046268a>] piix_pci_device_suspend+0x1a/0x140
[ 22.916846] [<c033b472>] pci_legacy_suspend+0x32/0xf0
[ 22.916856] [<c033b794>] pci_pm_suspend+0x94/0x130
[ 22.916866] [<c062386d>] ? printk+0x18/0x1b
[ 22.916877] [<c0403620>] ? pm_dev_dbg+0x90/0xe0
[ 22.916886] [<c0403281>] pm_op+0x141/0x190
[ 22.916896] [<c0403abf>] device_suspend+0x36f/0x4e0
[ 22.916912] [<c015c199>] suspend_devices_and_enter+0x69/0x1e0
[ 22.916922] [<c015c469>] enter_state+0x129/0x190
[ 22.916932] [<c015c5a9>] pm_suspend+0x19/0x20
[ 22.916945] [<c092220e>] test_suspend+0x166/0x19b
[ 22.916955] [<c09220a8>] ? test_suspend+0x0/0x19b
[ 22.916965] [<c0101125>] do_one_initcall+0x35/0x180
[ 22.916985] [<c01ed600>] ? proc_create_data+0x60/0xb0
[ 22.917002] [<c016ee9d>] ? register_irq_proc+0x9d/0xc0
[ 22.917020] [<c090d51d>] kernel_init+0x8b/0xe2
[ 22.917029] [<c090d492>] ? kernel_init+0x0/0xe2
[ 22.917043] [<c0103913>] kernel_thread_helper+0x7/0x14
[ 22.917051] ---[ end trace 70c65dce96240608 ]---
[ 22.917647] PM: suspend devices took 0.064 seconds
[ 22.917829] ACPI: Preparing to enter system sleep state S1
[ 22.954682] ACPI: Waking up from system sleep state S1
[ 22.956970] ------------[ cut here ]------------
[ 22.956978] WARNING: at drivers/ata/libata-core.c:5335 ata_host_request_pm+0x115/0x140()
[ 22.956986] Modules linked in:
[ 22.956997] Pid: 1, comm: swapper Tainted: G W 2.6.29 #108
[ 22.957004] Call Trace:
[ 22.957031] [<c012a1ab>] warn_slowpath+0x8b/0x100
[ 22.957044] [<c01270bf>] ? wakeup_preempt_entity+0x15f/0x1c0
[ 22.957067] [<c015080b>] ? trace_hardirqs_on+0xb/0x10
[ 22.957087] [<c04590fa>] ? ata_port_wait_eh+0x7a/0xb0
[ 22.957110] [<c013eb20>] ? autoremove_wake_function+0x0/0x50
[ 22.957120] [<c044aa85>] ata_host_request_pm+0x115/0x140
[ 22.957130] [<c044aad5>] ata_host_resume+0x25/0x60
[ 22.957144] [<c0462618>] piix_pci_device_resume+0x58/0xb0
[ 22.957158] [<c033b212>] pci_legacy_resume+0x32/0x60
[ 22.957168] [<c033b3f7>] pci_pm_resume+0x77/0xc0
[ 22.957179] [<c0403202>] pm_op+0xc2/0x190
[ 22.957189] [<c040400b>] device_resume+0xfb/0x420
[ 22.957205] [<c015c1fd>] suspend_devices_and_enter+0xcd/0x1e0
[ 22.957215] [<c015c469>] enter_state+0x129/0x190
[ 22.957225] [<c015c5a9>] pm_suspend+0x19/0x20
[ 22.957238] [<c092220e>] test_suspend+0x166/0x19b
[ 22.957248] [<c09220a8>] ? test_suspend+0x0/0x19b
[ 22.957259] [<c0101125>] do_one_initcall+0x35/0x180
[ 22.957278] [<c01ed600>] ? proc_create_data+0x60/0xb0
[ 22.957295] [<c016ee9d>] ? register_irq_proc+0x9d/0xc0
[ 22.957312] [<c090d51d>] kernel_init+0x8b/0xe2
[ 22.957322] [<c090d492>] ? kernel_init+0x0/0xe2
[ 22.957336] [<c0103913>] kernel_thread_helper+0x7/0x14
[ 22.957343] ---[ end trace 70c65dce96240609 ]---
[ 22.957423] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 22.957536] aic7xxx 0000:00:0c.0: enabling device (0116 -> 0117)
[ 22.957552] aic7xxx 0000:00:0c.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 23.954281] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
root@computer-desktop:/usr/src/linux# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 Ethernet controller: Intel Corporation 82556 EtherExpress PRO/100 Smart (rev 03)
00:0c.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:12.0 Multimedia audio controller: Rockwell International Device 4310
00:12.1 Communication controller: Rockwell International Riptide HSF 56k PCI Modem
00:12.2 Input device controller: Rockwell International Device 4312
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)
.config can be found at http://www.cccmz.de/~snakebyte/config_200
Greetings, Eric
reply other threads:[~2009-03-30 13:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090330133245.GA4631@alice \
--to=snakebyte@gmx.de \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.