[root@Dell1 test-pv]# cat 1-pv.cfg
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/boot/vmlinuz-2.6.29"

# Optional ramdisk.
ramdisk = "/boot/initrd-2.6.29.img"

memory = 512

# A name for your domain. All domains must have different names.
name = "test-pv"

vcpus = 2

vif = [ 'ip=192.168.2.101, mac=00:16:3e:00:10:11, bridge=xenbr0' ]

disk = [ 'file:/root/test-pv/vm1disk,sda1,w' ]

# Set root device.
root = "/dev/sda1 ro"

extra = "4"

发件人： Thiago Camargo Martins Cordeiro

发送时间： 2009-03-26 01:55:58

收件人： zyshao.maillist

抄送： xen-devel@lists.xensource.com

主题： Re: [Xen-devel] Upgrage PV domU kernel?

Hi Zyshao,

You can download the latest kernel from http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2 within your domU, compile it as usual, copy vmlinuz (and initramdisk) to your dom0 (if you dont use PyGRUB) and start it!

Good luck!
Thiago

2009/3/24 zyshao.maillist <zyshao.maillist@gmail.com>

hi pals,

I need to run some HPC applications on the PV Guest (configured with multiple VCPUs and the application invokes also multiple processes to communicate with each other during the lifetime), and found that in some overcommitted cases, the application's performance degrades drastically. I got a Xen installation with both Dom0 and DomU running "vmlinuz-2.6.18.8-xen" kernel, i.e., the default configuration.

I am wondering if I can Upgrade the kernel of the PV Guest, i.e., domU, to run other alternative kernel, such as latest stable linux kernel, 2.6.28.8? By this way, it may be possible to avoid the performance sacrifice resulted by spin-lock problem.

Thanks in advance for any suggestions!

Zhiyuan Shao

2009-03-25

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel