Re: Re: Re: Upgrage PV domU kernel?

["Zhiyuan Shao" <zyshao.maillist@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 2798 bytes --]

Using the default settings always when make (kernel) asks?

Thanks,

2009-03-30 



Zhiyuan Shao 



发件人： Thiago Camargo Martins Cordeiro 
发送时间： 2009-03-30  21:22:05 
收件人： Zhiyuan Shao 
抄送： xen-devel@lists.xensource.com 
主题： Re: Re: Re: [Xen-devel] Upgrage PV domU kernel? 
 
Have you enabled this options:

CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_HIGHMEM64G=y

...in your domU's config kernel?

Good luck!
Thiago


2009/3/30 Zhiyuan Shao <zyshao.maillist@gmail.com>

I tried this way, but seems it doesnot work.

[root@Dell1 test-pv]# xm cr -c 1-pv.cfg 
Using config file "./1-pv.cfg".
Error: (2, 'Invalid kernel', "elf_xen_note_check: ERROR: Not a Xen-ELF image: No ELF notes or '__xen_guest' section found.\n")

The configure file of 1-pv.cfg:

[root@Dell1 test-pv]# cat 1-pv.cfg
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/boot/vmlinuz-2.6.29"
 
# Optional ramdisk.
ramdisk = "/boot/initrd-2.6.29.img"
 
memory = 512
 
# A name for your domain. All domains must have different names.
name = "test-pv"
 
vcpus = 2
 
vif = [ 'ip=192.168.2.101, mac=00:16:3e:00:10:11, bridge=xenbr0' ]
 
disk = [ 'file:/root/test-pv/vm1disk,sda1,w' ]
 
# Set root device.
root = "/dev/sda1 ro"
 
extra = "4"
 


2009-03-30 



Zhiyuan Shao 



发件人： Thiago Camargo Martins Cordeiro 
发送时间： 2009-03-26  01:55:58 
收件人： zyshao.maillist 
抄送： xen-devel@lists.xensource.com 
主题： Re: [Xen-devel] Upgrage PV domU kernel? 
Hi Zyshao,

 You can download the latest kernel from http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2 within your domU, compile it as usual, copy vmlinuz (and initramdisk) to your dom0 (if you dont use PyGRUB) and start it!

Good luck!
Thiago


2009/3/24 zyshao.maillist <zyshao.maillist@gmail.com>

hi pals,

I need to run some HPC applications on the PV Guest (configured with multiple VCPUs and the application invokes also multiple processes to communicate with each other during the lifetime), and found that in some overcommitted cases, the application's performance degrades drastically. I got a Xen installation with both Dom0 and DomU running "vmlinuz-2.6.18.8-xen" kernel, i.e., the default configuration. 

I am wondering if I can Upgrade the kernel of the PV Guest, i.e., domU, to run other alternative kernel, such as latest stable linux kernel, 2.6.28.8? By this way, it may be possible to avoid the performance sacrifice resulted by spin-lock problem.

Thanks in advance for any suggestions!

Zhiyuan Shao


2009-03-25 


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

[-- Attachment #1.2: Type: text/html, Size: 7940 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel