From: Jerry Van Baren <gvb.uboot@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] libfdt: Rework/cleanup fdt_next_tag()
Date: Wed, 1 Apr 2009 19:53:45 -0400 [thread overview]
Message-ID: <20090401235345.GC25459@cideas.com> (raw)
Currently, callers of fdt_next_tag() must usually follow the call with
some sort of call to fdt_offset_ptr() to verify that the blob isn't
truncated in the middle of the tag data they're going to process.
This is a bit silly, since fdt_next_tag() generally has to call
fdt_offset_ptr() on at least some of the data following the tag for
its own operation.
This patch alters fdt_next_tag() to always use fdt_offset_ptr() to
verify the data between its starting offset and the offset it returns
in nextoffset. This simplifies fdt_get_property() which no longer has
to verify itself that the property data is all present.
At the same time, I neaten and clarify the error handling for
fdt_next_tag(). Previously, fdt_next_tag() could return -1 instead of
a tag value in some circumstances - which almost none of the callers
checked for. Also, fdt_next_tag() could return FDT_END either because
it encountered an FDT_END tag, or because it reached the end of the
structure block - no way was provided to tell between these cases.
With this patch, fdt_next_tag() always returns FDT_END with a negative
value in nextoffset for an error. This means the several places which
loop looking for FDT_END will still work correctly - they only need to
check for errors at the end. The errors which fdt_next_tag() can
report are:
- -FDT_ERR_TRUNCATED if it reached the end of the structure
block instead of finding a tag.
- -FDT_BADSTRUCTURE if a bad tag was encountered, or if the
tag data couldn't be verified with fdt_offset_ptr().
This patch also updates the callers of fdt_next_tag(), where
appropriate, to make use of the new error reporting.
Finally, the prototype for the long gone _fdt_next_tag() is removed
from libfdt_internal.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
libfdt/fdt.c | 46 +++++++++++++++++++++++++++++-----------------
libfdt/fdt_ro.c | 33 +++++++++------------------------
libfdt/fdt_rw.c | 2 ++
libfdt/fdt_sw.c | 9 ++++-----
libfdt/libfdt_internal.h | 1 -
5 files changed, 44 insertions(+), 47 deletions(-)
diff --git a/libfdt/fdt.c b/libfdt/fdt.c
index 940cee8..b09ea6f 100644
--- a/libfdt/fdt.c
+++ b/libfdt/fdt.c
@@ -94,42 +94,53 @@ const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
return p;
}
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
+uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset)
{
const uint32_t *tagp, *lenp;
uint32_t tag;
+ int offset = startoffset;
const char *p;
- if (offset % FDT_TAGSIZE)
- return -1;
-
+ *nextoffset = -FDT_ERR_TRUNCATED;
tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
- if (! tagp)
+ if (!tagp)
return FDT_END; /* premature end */
tag = fdt32_to_cpu(*tagp);
offset += FDT_TAGSIZE;
+ *nextoffset = -FDT_ERR_BADSTRUCTURE;
switch (tag) {
case FDT_BEGIN_NODE:
/* skip name */
do {
p = fdt_offset_ptr(fdt, offset++, 1);
} while (p && (*p != '\0'));
- if (! p)
- return FDT_END;
+ if (!p)
+ return FDT_END; /* premature end */
break;
+
case FDT_PROP:
lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
- if (! lenp)
- return FDT_END;
- /* skip name offset, length and value */
- offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
+ if (!lenp)
+ return FDT_END; /* premature end */
+ /* skip-name offset, length and value */
+ offset += sizeof(struct fdt_property) - FDT_TAGSIZE
+ + fdt32_to_cpu(*lenp);
+ break;
+
+ case FDT_END:
+ case FDT_END_NODE:
+ case FDT_NOP:
break;
+
+ default:
+ return FDT_END;
}
- if (nextoffset)
- *nextoffset = FDT_TAGALIGN(offset);
+ if (!fdt_offset_ptr(fdt, startoffset, offset - startoffset))
+ return FDT_END; /* premature end */
+ *nextoffset = FDT_TAGALIGN(offset);
return tag;
}
@@ -171,10 +182,11 @@ int fdt_next_node(const void *fdt, int offset, int *depth)
break;
case FDT_END:
- return -FDT_ERR_NOTFOUND;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
+ if ((nextoffset >= 0)
+ || ((nextoffset == -FDT_ERR_TRUNCATED) && !depth))
+ return -FDT_ERR_NOTFOUND;
+ else
+ return nextoffset;
}
} while (tag != FDT_BEGIN_NODE);
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index d682a40..1e1e322 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -205,7 +205,6 @@ const struct fdt_property *fdt_get_property_namelen(const void *fdt,
{
uint32_t tag;
const struct fdt_property *prop;
- int namestroff;
int offset, nextoffset;
int err;
@@ -220,38 +219,24 @@ const struct fdt_property *fdt_get_property_namelen(const void *fdt,
tag = fdt_next_tag(fdt, offset, &nextoffset);
switch (tag) {
case FDT_END:
- err = -FDT_ERR_TRUNCATED;
+ if (nextoffset < 0)
+ err = nextoffset;
+ else
+ /* FDT_END tag with unclosed nodes */
+ err = -FDT_ERR_BADSTRUCTURE;
goto fail;
- case FDT_BEGIN_NODE:
- case FDT_END_NODE:
- case FDT_NOP:
- break;
-
case FDT_PROP:
- err = -FDT_ERR_BADSTRUCTURE;
- prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
- if (! prop)
- goto fail;
- namestroff = fdt32_to_cpu(prop->nameoff);
- if (_fdt_string_eq(fdt, namestroff, name, namelen)) {
+ prop = _fdt_offset_ptr(fdt, offset);
+ if (_fdt_string_eq(fdt, fdt32_to_cpu(prop->nameoff),
+ name, namelen)) {
/* Found it! */
- int len = fdt32_to_cpu(prop->len);
- prop = fdt_offset_ptr(fdt, offset,
- sizeof(*prop)+len);
- if (! prop)
- goto fail;
-
if (lenp)
- *lenp = len;
+ *lenp = fdt32_to_cpu(prop->len);
return prop;
}
break;
-
- default:
- err = -FDT_ERR_BADSTRUCTURE;
- goto fail;
}
} while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
diff --git a/libfdt/fdt_rw.c b/libfdt/fdt_rw.c
index cd06178..5c27a67 100644
--- a/libfdt/fdt_rw.c
+++ b/libfdt/fdt_rw.c
@@ -410,6 +410,8 @@ int fdt_open_into(const void *fdt, void *buf, int bufsize)
struct_size = 0;
while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
;
+ if (struct_size < 0)
+ return struct_size;
}
if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
diff --git a/libfdt/fdt_sw.c b/libfdt/fdt_sw.c
index 698329e..2380b27 100644
--- a/libfdt/fdt_sw.c
+++ b/libfdt/fdt_sw.c
@@ -82,7 +82,7 @@ static void *_fdt_grab_space(void *fdt, int len)
return NULL;
fdt_set_size_dt_struct(fdt, offset + len);
- return fdt_offset_ptr_w(fdt, offset, len);
+ return _fdt_offset_ptr_w(fdt, offset);
}
int fdt_create(void *buf, int bufsize)
@@ -237,18 +237,17 @@ int fdt_finish(void *fdt)
while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
if (tag == FDT_PROP) {
struct fdt_property *prop =
- fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
+ _fdt_offset_ptr_w(fdt, offset);
int nameoff;
- if (! prop)
- return -FDT_ERR_BADSTRUCTURE;
-
nameoff = fdt32_to_cpu(prop->nameoff);
nameoff += fdt_size_dt_strings(fdt);
prop->nameoff = cpu_to_fdt32(nameoff);
}
offset = nextoffset;
}
+ if (nextoffset < 0)
+ return nextoffset;
/* Finally, adjust the header */
fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
diff --git a/libfdt/libfdt_internal.h b/libfdt/libfdt_internal.h
index 46eb93e..d2dcbd6 100644
--- a/libfdt/libfdt_internal.h
+++ b/libfdt/libfdt_internal.h
@@ -62,7 +62,6 @@
return err; \
}
-uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
int _fdt_check_node_offset(const void *fdt, int offset);
const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
int _fdt_node_end_offset(void *fdt, int nodeoffset);
--
1.5.6.5
reply other threads:[~2009-04-01 23:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090401235345.GC25459@cideas.com \
--to=gvb.uboot@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.