From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@HansenPartnership.com, linux-scsi@vger.kernel.org
Subject: [PATCH 13/15] libfc: Convert debug statements in fc_fcp.c to use new libfc debug macros.
Date: Fri, 03 Apr 2009 14:59:10 -0700 [thread overview]
Message-ID: <20090403215910.10856.58663.stgit@fritz> (raw)
In-Reply-To: <20090403215758.10856.6946.stgit@fritz>
Convert debug statements in fc_fcp.c to use new libfc
debug macros.
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/libfc/fc_fcp.c | 95 +++++++++++++++++++++----------------------
1 files changed, 47 insertions(+), 48 deletions(-)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index f21fbcc..73b549d 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -47,14 +47,6 @@ unsigned int fc_debug_logging;
module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
-static int fc_fcp_debug;
-
-#define FC_DEBUG_FCP(fmt...) \
- do { \
- if (fc_fcp_debug) \
- FC_DBG(fmt); \
- } while (0)
-
static struct kmem_cache *scsi_pkt_cachep;
/* SRB state definitions */
@@ -351,8 +343,8 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
fc_frame_crc_check(fp))
goto crc_err;
- FC_DEBUG_FCP("data received past end. len %zx offset %zx "
- "data_len %x\n", len, offset, fsp->data_len);
+ FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
+ "data_len %x\n", len, offset, fsp->data_len);
fc_fcp_retry_cmd(fsp);
return;
}
@@ -415,7 +407,8 @@ crc_err:
stats->ErrorFrames++;
/* FIXME - per cpu count, not total count! */
if (stats->InvalidCRCCount++ < 5)
- printk(KERN_WARNING "CRC error on data frame for port (%6x)\n",
+ printk(KERN_WARNING "libfc: CRC error on data "
+ "frame for port (%6x)\n",
fc_host_port_id(lp->host));
/*
* Assume the frame is total garbage.
@@ -479,14 +472,14 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
WARN_ON(seq_blen <= 0);
if (unlikely(offset + seq_blen > fsp->data_len)) {
/* this should never happen */
- FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n",
- seq_blen, offset);
+ FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
+ "offset %zx\n", seq_blen, offset);
fc_fcp_send_abort(fsp);
return 0;
} else if (offset != fsp->xfer_len) {
/* Out of Order Data Request - no problem, but unexpected. */
- FC_DEBUG_FCP("xfer-ready non-contiguous. "
- "seq_blen %zx offset %zx\n", seq_blen, offset);
+ FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
+ "seq_blen %zx offset %zx\n", seq_blen, offset);
}
/*
@@ -497,7 +490,7 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
t_blen = fsp->max_payload;
if (lp->seq_offload) {
t_blen = min(seq_blen, (size_t)lp->lso_max);
- FC_DEBUG_FCP("fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
+ FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
fsp, seq_blen, lp->lso_max, t_blen);
}
@@ -698,7 +691,7 @@ static void fc_fcp_reduce_can_queue(struct fc_lport *lp)
if (!can_queue)
can_queue = 1;
lp->host->can_queue = can_queue;
- shost_printk(KERN_ERR, lp->host, "Could not allocate frame.\n"
+ shost_printk(KERN_ERR, lp->host, "libfc: Could not allocate frame.\n"
"Reducing can_queue to %d.\n", can_queue);
done:
spin_unlock_irqrestore(lp->host->host_lock, flags);
@@ -773,7 +766,7 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
fc_fcp_resp(fsp, fp);
} else {
- FC_DBG("unexpected frame. r_ctl %x\n", r_ctl);
+ FC_FCP_DBG(fsp, "unexpected frame. r_ctl %x\n", r_ctl);
}
unlock:
fc_fcp_unlock_pkt(fsp);
@@ -882,17 +875,17 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
return;
}
fsp->status_code = FC_DATA_OVRRUN;
- FC_DBG("tgt %6x xfer len %zx greater than expected len %x. "
- "data len %x\n",
- fsp->rport->port_id,
- fsp->xfer_len, expected_len, fsp->data_len);
+ FC_FCP_DBG(fsp, "tgt %6x xfer len %zx greater than expected, "
+ "len %x, data len %x\n",
+ fsp->rport->port_id,
+ fsp->xfer_len, expected_len, fsp->data_len);
}
fc_fcp_complete_locked(fsp);
return;
len_err:
- FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n",
- flags, fr_len(fp), respl, snsl);
+ FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
+ "snsl %u\n", flags, fr_len(fp), respl, snsl);
err:
fsp->status_code = FC_ERROR;
fc_fcp_complete_locked(fsp);
@@ -1112,13 +1105,11 @@ static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
if (fc_fcp_lock_pkt(fsp))
return;
- switch (error) {
- case -FC_EX_CLOSED:
+ if (error == -FC_EX_CLOSED) {
fc_fcp_retry_cmd(fsp);
goto unlock;
- default:
- FC_DBG("unknown error %ld\n", PTR_ERR(fp));
}
+
/*
* clear abort pending, because the lower layer
* decided to force completion.
@@ -1150,10 +1141,10 @@ static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
fsp->wait_for_comp = 0;
if (!rc) {
- FC_DBG("target abort cmd failed\n");
+ FC_FCP_DBG(fsp, "target abort cmd failed\n");
rc = FAILED;
} else if (fsp->state & FC_SRB_ABORTED) {
- FC_DBG("target abort cmd passed\n");
+ FC_FCP_DBG(fsp, "target abort cmd passed\n");
rc = SUCCESS;
fc_fcp_complete_locked(fsp);
}
@@ -1218,7 +1209,7 @@ static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
spin_unlock_bh(&fsp->scsi_pkt_lock);
if (!rc) {
- FC_DBG("lun reset failed\n");
+ FC_SCSI_DBG(lp, "lun reset failed\n");
return FAILED;
}
@@ -1226,7 +1217,7 @@ static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
if (fsp->cdb_status != FCP_TMF_CMPL)
return FAILED;
- FC_DBG("lun reset to lun %u completed\n", lun);
+ FC_SCSI_DBG(lp, "lun reset to lun %u completed\n", lun);
fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED);
return SUCCESS;
}
@@ -1393,13 +1384,13 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
rjt = fc_frame_payload_get(fp, sizeof(*rjt));
switch (rjt->er_reason) {
default:
- FC_DEBUG_FCP("device %x unexpected REC reject "
- "reason %d expl %d\n",
- fsp->rport->port_id, rjt->er_reason,
- rjt->er_explan);
+ FC_FCP_DBG(fsp, "device %x unexpected REC reject "
+ "reason %d expl %d\n",
+ fsp->rport->port_id, rjt->er_reason,
+ rjt->er_explan);
/* fall through */
case ELS_RJT_UNSUP:
- FC_DEBUG_FCP("device does not support REC\n");
+ FC_FCP_DBG(fsp, "device does not support REC\n");
rp = fsp->rport->dd_data;
/*
* if we do not spport RECs or got some bogus
@@ -1519,8 +1510,8 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
break;
default:
- FC_DBG("REC %p fid %x error unexpected error %d\n",
- fsp, fsp->rport->port_id, error);
+ FC_FCP_DBG(fsp, "REC %p fid %x error unexpected error %d\n",
+ fsp, fsp->rport->port_id, error);
fsp->status_code = FC_CMD_PLOGO;
/* fall through */
@@ -1529,9 +1520,9 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
* Assume REC or LS_ACC was lost.
* The exchange manager will have aborted REC, so retry.
*/
- FC_DBG("REC fid %x error error %d retry %d/%d\n",
- fsp->rport->port_id, error, fsp->recov_retry,
- FC_MAX_RECOV_RETRY);
+ FC_FCP_DBG(fsp, "REC fid %x error error %d retry %d/%d\n",
+ fsp->rport->port_id, error, fsp->recov_retry,
+ FC_MAX_RECOV_RETRY);
if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
fc_fcp_rec(fsp);
else
@@ -2016,9 +2007,11 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
if (lp->state != LPORT_ST_READY)
return rc;
+ FC_SCSI_DBG(lp, "Resetting rport (%6x)\n", rport->port_id);
+
fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO);
if (fsp == NULL) {
- FC_DBG("could not allocate scsi_pkt\n");
+ printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
sc_cmd->result = DID_NO_CONNECT << 16;
goto out;
}
@@ -2053,17 +2046,21 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
struct fc_lport *lp = shost_priv(shost);
unsigned long wait_tmo;
+ FC_SCSI_DBG(lp, "Resetting host\n");
+
lp->tt.lport_reset(lp);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo))
msleep(1000);
if (fc_fcp_lport_queue_ready(lp)) {
- shost_printk(KERN_INFO, shost, "Host reset succeeded.\n");
+ shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
+ "on port (%6x)\n", fc_host_port_id(lp->host));
return SUCCESS;
} else {
- shost_printk(KERN_INFO, shost, "Host reset failed. "
- "lport not ready.\n");
+ shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
+ "port (%6x) is not ready.\n",
+ fc_host_port_id(lp->host));
return FAILED;
}
}
@@ -2122,7 +2119,8 @@ void fc_fcp_destroy(struct fc_lport *lp)
struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
if (!list_empty(&si->scsi_pkt_queue))
- printk(KERN_ERR "Leaked scsi packets.\n");
+ printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
+ "port (%6x)\n", fc_host_port_id(lp->host));
mempool_destroy(si->scsi_pkt_pool);
kfree(si);
@@ -2171,7 +2169,8 @@ static int __init libfc_init(void)
sizeof(struct fc_fcp_pkt),
0, SLAB_HWCACHE_ALIGN, NULL);
if (scsi_pkt_cachep == NULL) {
- FC_DBG("Unable to allocate SRB cache...module load failed!");
+ printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
+ "module load failed!");
return -ENOMEM;
}
next prev parent reply other threads:[~2009-04-03 21:59 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-03 21:57 [PATCH 00/15] Open-FCoE updates (fixes and a feature) for 2.6.30 merge window Robert Love
2009-04-03 21:58 ` [PATCH 01/15] libfc: Hold disc mutex while processing gpn ft resp Robert Love
2009-04-03 21:58 ` [PATCH 02/15] libfc: Do not retry if the new state is not the same as old state Robert Love
2009-04-03 21:58 ` [PATCH 03/15] libfc: Track rogue remote ports Robert Love
2009-04-03 21:58 ` [PATCH 04/15] libfc: During fabric logoff, flush the rport Q after logging off dns port Robert Love
2009-04-03 21:58 ` [PATCH 05/15] libfc: Change state to NONE in fc_lport_destroy Robert Love
2009-04-03 21:58 ` [PATCH 06/15] libfc: whenever queueing delete ev for rport, set state to NONE Robert Love
2009-04-03 21:58 ` [PATCH 07/15] fcoe: Add runtime debug logging with module parameter debug_logging Robert Love
2009-04-03 21:58 ` [PATCH 08/15] libfcoe: Add runtime debugging with module param debug_logging Robert Love
2009-04-03 21:58 ` [PATCH 09/15] libfc: Add runtime debugging with debug_logging module parameter Robert Love
2009-04-03 21:58 ` [PATCH 10/15] libfc: Convert debug statements in fc_lport.c to use new libfc debug macros Robert Love
2009-04-03 21:58 ` [PATCH 11/15] libfc: Convert debug statements in fc_disc.c " Robert Love
2009-04-03 21:59 ` [PATCH 12/15] libfc: Convert debug statements in fc_rport.c " Robert Love
2009-04-03 21:59 ` Robert Love [this message]
2009-04-03 21:59 ` [PATCH 14/15] libfc: Convert debug statements in fc_exch.c " Robert Love
2009-04-03 21:59 ` [PATCH 15/15] libfc: Remove unused FC_DBG macro Robert Love
2009-04-03 22:14 ` [PATCH 00/15] Open-FCoE updates (fixes and a feature) for 2.6.30 merge window James Bottomley
2009-04-03 22:28 ` Love, Robert W
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090403215910.10856.58663.stgit@fritz \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.