From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jarkko Nikula Subject: Re: [PATCH 0/6] ASoC: 4 channel support for twl4030 and omap-mcbsp Date: Tue, 7 Apr 2009 08:45:36 +0300 Message-ID: <20090407084536.bae7bcb0.jarkko.nikula@nokia.com> References: <1239020372-8457-1-git-send-email-peter.ujfalusi@nokia.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mgw-mx06.nokia.com (smtp.nokia.com [192.100.122.233]) by alsa0.perex.cz (Postfix) with ESMTP id EE5242443C for ; Tue, 7 Apr 2009 07:44:56 +0200 (CEST) In-Reply-To: <1239020372-8457-1-git-send-email-peter.ujfalusi@nokia.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: "Ujfalusi Peter (Nokia-D/Tampere)" Cc: "sakoman@gmail.com" , "alsa-devel@alsa-project.org" , "broonie@opensource.wolfsonmicro.com" List-Id: alsa-devel@alsa-project.org On Mon, 6 Apr 2009 14:19:26 +0200 "Ujfalusi Peter (Nokia-D/Tampere)" wrote: > As an example, the board file for Beagle is modified to add support > for stereo and TDM mode depending on the stream's channel count, so > the stereo and the four channel mode are supported on Beagle. > Peter, before starting to hack on this, did I interpret TWL block diagram correctly so that I can route both R1/R2 and L1/L2 into same outputs? It seems that only codec outputs available in Beagle are the HSOL and HSOR. There seems to be no test pads for PreDriv and IHF outputs. Jarkko