From: akpm@linux-foundation.org
To: yanghy@cn.fujitsu.com, mm-commits@vger.kernel.org
Subject: [merged] replace-all-dma_30bit_mask-macro-with-dma_bit_mask30.patch removed from -mm tree
Date: Tue, 07 Apr 2009 12:08:02 -0700 [thread overview]
Message-ID: <200904071908.n37J8214011606@imap1.linux-foundation.org> (raw)
The patch titled
dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)
has been removed from the -mm tree. Its filename was
replace-all-dma_30bit_mask-macro-with-dma_bit_mask30.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)
From: Yang Hongyang <yanghy@cn.fujitsu.com>
Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)
Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/net/b44.c | 14 +++++++-------
drivers/net/wireless/b43/dma.c | 6 +++---
drivers/net/wireless/b43legacy/dma.c | 6 +++---
sound/pci/sis7019.c | 2 +-
sound/pci/trident/trident_main.c | 4 ++--
5 files changed, 16 insertions(+), 16 deletions(-)
diff -puN drivers/net/b44.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30 drivers/net/b44.c
--- a/drivers/net/b44.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30
+++ a/drivers/net/b44.c
@@ -660,7 +660,7 @@ static int b44_alloc_rx_skb(struct b44 *
/* Hardware bug work-around, the chip is unable to do PCI DMA
to/from anything above 1GB :-( */
if (ssb_dma_mapping_error(bp->sdev, mapping) ||
- mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
+ mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
/* Sigh... */
if (!ssb_dma_mapping_error(bp->sdev, mapping))
ssb_dma_unmap_single(bp->sdev, mapping,
@@ -673,7 +673,7 @@ static int b44_alloc_rx_skb(struct b44 *
RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
if (ssb_dma_mapping_error(bp->sdev, mapping) ||
- mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
+ mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
if (!ssb_dma_mapping_error(bp->sdev, mapping))
ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
@@ -965,7 +965,7 @@ static int b44_start_xmit(struct sk_buff
}
mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) {
+ if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
struct sk_buff *bounce_skb;
/* Chip can't handle DMA to/from >1GB, use bounce buffer */
@@ -979,7 +979,7 @@ static int b44_start_xmit(struct sk_buff
mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data,
len, DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) {
+ if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
if (!ssb_dma_mapping_error(bp->sdev, mapping))
ssb_dma_unmap_single(bp->sdev, mapping,
len, DMA_TO_DEVICE);
@@ -1204,7 +1204,7 @@ static int b44_alloc_consistent(struct b
DMA_BIDIRECTIONAL);
if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) ||
- rx_ring_dma + size > DMA_30BIT_MASK) {
+ rx_ring_dma + size > DMA_BIT_MASK(30)) {
kfree(rx_ring);
goto out_err;
}
@@ -1231,7 +1231,7 @@ static int b44_alloc_consistent(struct b
DMA_TO_DEVICE);
if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) ||
- tx_ring_dma + size > DMA_30BIT_MASK) {
+ tx_ring_dma + size > DMA_BIT_MASK(30)) {
kfree(tx_ring);
goto out_err;
}
@@ -2180,7 +2180,7 @@ static int __devinit b44_init_one(struct
"Failed to powerup the bus\n");
goto err_out_free_dev;
}
- err = ssb_dma_set_mask(sdev, DMA_30BIT_MASK);
+ err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
if (err) {
dev_err(sdev->dev,
"Required 30BIT DMA mask unsupported by the system.\n");
diff -puN drivers/net/wireless/b43/dma.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30 drivers/net/wireless/b43/dma.c
--- a/drivers/net/wireless/b43/dma.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30
+++ a/drivers/net/wireless/b43/dma.c
@@ -779,12 +779,12 @@ static u64 supported_dma_mask(struct b43
if (tmp & B43_DMA32_TXADDREXT_MASK)
return DMA_BIT_MASK(32);
- return DMA_30BIT_MASK;
+ return DMA_BIT_MASK(30);
}
static enum b43_dmatype dma_mask_to_engine_type(u64 dmamask)
{
- if (dmamask == DMA_30BIT_MASK)
+ if (dmamask == DMA_BIT_MASK(30))
return B43_DMA_30BIT;
if (dmamask == DMA_BIT_MASK(32))
return B43_DMA_32BIT;
@@ -1005,7 +1005,7 @@ static int b43_dma_set_mask(struct b43_w
continue;
}
if (mask == DMA_BIT_MASK(32)) {
- mask = DMA_30BIT_MASK;
+ mask = DMA_BIT_MASK(30);
fallback = 1;
continue;
}
diff -puN drivers/net/wireless/b43legacy/dma.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30 drivers/net/wireless/b43legacy/dma.c
--- a/drivers/net/wireless/b43legacy/dma.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30
+++ a/drivers/net/wireless/b43legacy/dma.c
@@ -856,12 +856,12 @@ static u64 supported_dma_mask(struct b43
if (tmp & B43legacy_DMA32_TXADDREXT_MASK)
return DMA_BIT_MASK(32);
- return DMA_30BIT_MASK;
+ return DMA_BIT_MASK(30);
}
static enum b43legacy_dmatype dma_mask_to_engine_type(u64 dmamask)
{
- if (dmamask == DMA_30BIT_MASK)
+ if (dmamask == DMA_BIT_MASK(30))
return B43legacy_DMA_30BIT;
if (dmamask == DMA_BIT_MASK(32))
return B43legacy_DMA_32BIT;
@@ -1048,7 +1048,7 @@ static int b43legacy_dma_set_mask(struct
continue;
}
if (mask == DMA_BIT_MASK(32)) {
- mask = DMA_30BIT_MASK;
+ mask = DMA_BIT_MASK(30);
fallback = 1;
continue;
}
diff -puN sound/pci/sis7019.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30 sound/pci/sis7019.c
--- a/sound/pci/sis7019.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30
+++ a/sound/pci/sis7019.c
@@ -1300,7 +1300,7 @@ static int __devinit sis_chip_create(str
if (rc)
goto error_out;
- if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0) {
printk(KERN_ERR "sis7019: architecture does not support "
"30-bit PCI busmaster DMA");
goto error_out_enabled;
diff -puN sound/pci/trident/trident_main.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30 sound/pci/trident/trident_main.c
--- a/sound/pci/trident/trident_main.c~replace-all-dma_30bit_mask-macro-with-dma_bit_mask30
+++ a/sound/pci/trident/trident_main.c
@@ -3559,8 +3559,8 @@ int __devinit snd_trident_create(struct
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 30 bits */
- if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(30)) < 0) {
snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
_
Patches currently in -mm which might be from yanghy@cn.fujitsu.com are
origin.patch
reply other threads:[~2009-04-07 19:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200904071908.n37J8214011606@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=yanghy@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.